successfully added to cart
View Cart
Cuerpos con mango de brida KSEM™
Cuerpos con mango de brida KSEM™
Cuerpos con mango de brida KSEM™
Cuerpos con mango de brida KSEM™
Cuerpos con mango de brida KSEM™
Cuerpos con mango de brida KSEM™

KSEM_R3SSF (5 x D) • Cuerpos KSEM • Mango con brida • Pulgadas

Cuerpos con mango de brida KSEM™

Features and benefits

  • Cuerpos de acero recocido para taladrado fiable con una vida de la herramienta sin igual, incluso en condiciones exigentes.

  • Asiento de alojamiento muy rígido: KSEM™ ofrece un alojamiento de cuatro paredes que proporciona estabilidad del a plaquita, calidad del orificio y una mayor vida de la herramienta.

  • Refrigeración interna cerca del filo de corte para mejorar la vida de la herramienta, el acabado de los orificios y la evacuación de virutas.

  • Ajuste perfecto en aplicaciones de torno con doble mango plano estable, con una entrada de refrigerante lateral en la brida.

  • Insert blades must be of the same seat size as the body it should be used on. For each seat size, there is a PREFERRED CHOICE of bodies for a particular insert diameter. Overhang of the insert to the body shall not exceed 0,25mm (0.0098") per side. Higher overhang is possible but will compromise performance, rigidity and efficient chip evacuation. We recommend to always use the closest fit possible, especially when machining long chipping materials.

Uses and application

  • Mango —  Cilíndrico  con plano y bridaMango — Cilíndrico con plano y brida
  • Taladrado —  Con refrigeración internaTaladrado — Con refrigeración interna

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (38)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (38)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (38)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (38)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (38)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (38)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (38)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (38)
  • M Stainless Steel (38)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (38)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (38)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (38)
  • K Cast Iron (38)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (38)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (38)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (38)
  • N Non-Ferrous Materials (38)
    • N1
      Wrought Aluminum
      (38)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (38)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (38)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (38)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (38)
    • N6
      Carbon, Graphite Composites, CFRP
      (38)
    • N7
      MMC's
      (38)
  • S High-Temp Alloys (38)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (38)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (38)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (38)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (38)
Select First Choice
  • US (9)
Applications
  • Convex Drilling Convex Drilling (38)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (38)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (38)
  • Counterboring Counterboring (38)
  • Countersinking Countersinking (38)
  • Drilling Drilling (38)
  • Flat Bottom Drilling Flat Bottom Drilling (38)
  • Inclined Entry Drilling Inclined Entry Drilling (38)
  • Inclined Exit Drilling Inclined Exit Drilling (38)
  • Pre-Condition Pre-Condition (38)
  • Stacked Plates Drilling Stacked Plates Drilling (38)
  • X-Offset Drilling X-Offset Drilling (38)
Cutting Diameter
  • 12.5 (2)
  • 12.6 (2)
  • 12.7 (2)
  • 12.8 (2)
  • 12.93 (2)
  • 13.0 (3)
  • 13.1 (3)
  • 13.2 (3)
  • 13.5 (3)
  • 13.6 (1)
  • 13.7 (1)
  • 13.8 (1)
  • 13.89 (1)
  • 14.0 (2)
  • 14.1 (2)
  • 14.15 (2)
  • 14.2 (2)
  • 14.29 (2)
  • 14.4 (1)
  • 14.5 (1)
  • 14.6 (1)
  • 14.68 (1)
  • 14.8 (1)
  • 15.0 (3)
  • 15.08 (3)
  • 15.3 (3)
  • 15.48 (3)
  • 15.5 (3)
  • 15.6 (2)
  • 15.7 (2)
  • 15.8 (2)
  • 15.875 (1)
  • 15.88 (1)
  • 16.0 (1)
  • 16.04 (1)
  • 16.09 (1)
  • 16.1 (1)
  • 16.15 (1)
  • 16.19 (1)
  • 16.2 (1)
  • 16.27 (1)
  • 17.0 (1)
  • 17.07 (1)
  • 17.35 (1)
  • 17.46 (1)
  • 17.5 (1)
  • 17.6 (1)
  • 17.7 (1)
  • 17.75 (1)
  • 17.8 (1)
  • 17.86 (1)
  • 17.9 (1)
  • 19.0 (2)
  • 19.05 (2)
  • 19.2 (2)
  • 19.228 (2)
  • 19.23 (2)
  • 19.25 (2)
  • 19.27 (2)
  • 19.32 (2)
  • 19.35 (2)
  • 19.36 (2)
  • 19.38 (2)
  • 19.45 (2)
  • 19.5 (2)
  • 20.5 (1)
  • 20.64 (1)
  • 20.7 (1)
  • 21.0 (1)
  • 21.1 (1)
  • 21.15 (1)
  • 21.2 (1)
  • 21.33 (1)
  • 21.43 (1)
  • 21.5 (1)
  • 21.7 (1)
  • 21.83 (1)
  • 22.0 (1)
  • 22.1 (2)
  • 22.15 (2)
  • 22.23 (2)
  • 22.44 (2)
  • 22.5 (2)
  • 22.62 (2)
  • 23.5 (1)
  • 23.6 (1)
  • 23.7 (1)
  • 23.81 (1)
  • 24.0 (1)
  • 24.5 (1)
  • 24.61 (1)
  • 24.7 (1)
  • 25.0 (4)
  • 25.07 (4)
  • 25.25 (3)
  • 25.3 (3)
  • 25.4 (3)
  • 25.5 (3)
  • 25.54 (3)
  • 25.6 (2)
  • 25.61 (2)
  • 25.65 (2)
  • 25.654 (2)
  • 25.67 (2)
  • 25.72 (2)
  • 25.76 (2)
  • 25.8 (2)
  • 25.806 (2)
  • 25.81 (2)
  • 27.0 (1)
  • 28.5 (1)
  • 28.58 (1)
  • 29.0 (1)
  • 30.16 (1)
  • 30.5 (1)
  • 30.56 (1)
  • 31.5 (2)
  • 31.75 (2)
  • 32.0 (2)
  • 32.5 (2)
  • 32.54 (2)
  • 32.94 (2)
  • 33.0 (3)
  • 33.34 (3)
  • 33.4 (3)
  • 33.5 (4)
  • 33.73 (4)
  • 34.0 (5)
  • 34.13 (5)
  • 34.5 (6)
  • 34.93 (6)
  • 35.0 (6)
  • 35.5 (7)
  • 35.72 (7)
  • 36.0 (7)
  • 36.12 (1)
  • 36.5 (2)
  • 36.51 (2)
  • 37.0 (3)
  • 37.31 (3)
  • 37.5 (3)
  • 38.0 (5)
  • 38.1 (5)
  • 38.46 (5)
  • 38.5 (5)
  • 39.0 (5)
  • 39.2 (5)
  • 39.5 (5)
  • 39.75 (5)
  • 40.0 (5)
to
Cutting Diameter
  • 0.4921 (2)
  • 0.4961 (2)
  • 0.5 (2)
  • 0.5039 (2)
  • 0.509 (2)
  • 0.5091 (2)
  • 0.5118 (3)
  • 0.5157 (3)
  • 0.516 (3)
  • 0.5197 (3)
  • 0.531 (3)
  • 0.5315 (3)
  • 0.5354 (1)
  • 0.5394 (1)
  • 0.5433 (1)
  • 0.5469 (1)
  • 0.547 (1)
  • 0.5512 (2)
  • 0.5551 (2)
  • 0.5571 (2)
  • 0.5591 (2)
  • 0.5626 (2)
  • 0.563 (2)
  • 0.5669 (1)
  • 0.5709 (1)
  • 0.5748 (1)
  • 0.578 (1)
  • 0.5827 (1)
  • 0.5906 (3)
  • 0.5937 (3)
  • 0.594 (3)
  • 0.6024 (3)
  • 0.609 (3)
  • 0.6094 (3)
  • 0.6102 (3)
  • 0.6142 (2)
  • 0.6181 (2)
  • 0.622 (2)
  • 0.625 (1)
  • 0.6252 (1)
  • 0.6299 (1)
  • 0.6315 (1)
  • 0.6335 (1)
  • 0.6339 (1)
  • 0.634 (1)
  • 0.6358 (1)
  • 0.6374 (1)
  • 0.6378 (1)
  • 0.6406 (1)
  • 0.641 (1)
  • 0.6693 (1)
  • 0.672 (1)
  • 0.6831 (1)
  • 0.6874 (1)
  • 0.6875 (1)
  • 0.688 (1)
  • 0.689 (1)
  • 0.6929 (1)
  • 0.6969 (1)
  • 0.6988 (1)
  • 0.7008 (1)
  • 0.703 (1)
  • 0.7031 (1)
  • 0.7047 (1)
  • 0.748 (2)
  • 0.75 (2)
  • 0.7559 (2)
  • 0.757 (2)
  • 0.7571 (2)
  • 0.7579 (2)
  • 0.7587 (2)
  • 0.759 (2)
  • 0.7606 (2)
  • 0.7618 (2)
  • 0.7622 (2)
  • 0.763 (2)
  • 0.7657 (2)
  • 0.766 (2)
  • 0.7677 (2)
  • 0.8071 (1)
  • 0.8125 (1)
  • 0.8126 (1)
  • 0.815 (1)
  • 0.8268 (1)
  • 0.8307 (1)
  • 0.8327 (1)
  • 0.8346 (1)
  • 0.8398 (1)
  • 0.8437 (1)
  • 0.844 (1)
  • 0.846 (1)
  • 0.8465 (1)
  • 0.8543 (1)
  • 0.859 (1)
  • 0.8661 (1)
  • 0.8701 (2)
  • 0.872 (2)
  • 0.875 (2)
  • 0.8752 (2)
  • 0.8835 (2)
  • 0.884 (2)
  • 0.8858 (2)
  • 0.8906 (2)
  • 0.9252 (1)
  • 0.9291 (1)
  • 0.9331 (1)
  • 0.9374 (1)
  • 0.9375 (1)
  • 0.938 (1)
  • 0.9449 (1)
  • 0.9646 (1)
  • 0.9689 (1)
  • 0.969 (1)
  • 0.9724 (1)
  • 0.9843 (4)
  • 0.987 (4)
  • 0.9941 (3)
  • 0.9961 (3)
  • 1.0 (3)
  • 1.0039 (3)
  • 1.0055 (3)
  • 1.0079 (2)
  • 1.008 (2)
  • 1.0098 (2)
  • 1.01 (2)
  • 1.0106 (2)
  • 1.011 (2)
  • 1.0126 (2)
  • 1.0142 (2)
  • 1.0157 (2)
  • 1.016 (2)
  • 1.0161 (2)
  • 1.063 (1)
  • 1.122 (1)
  • 1.125 (1)
  • 1.1252 (1)
  • 1.1417 (1)
  • 1.1875 (1)
  • 1.2008 (1)
  • 1.203 (1)
  • 1.2402 (2)
  • 1.25 (2)
  • 1.2598 (2)
  • 1.2795 (2)
  • 1.281 (2)
  • 1.2811 (2)
  • 1.297 (2)
  • 1.2992 (3)
  • 1.313 (3)
  • 1.3189 (4)
  • 1.328 (4)
  • 1.3386 (5)
  • 1.344 (5)
  • 1.3583 (6)
  • 1.375 (6)
  • 1.378 (6)
  • 1.3976 (7)
  • 1.406 (7)
  • 1.4173 (7)
  • 1.422 (1)
  • 1.437 (2)
  • 1.4374 (2)
  • 1.4375 (2)
  • 1.4567 (3)
  • 1.469 (3)
  • 1.4764 (3)
  • 1.4961 (5)
  • 1.5 (5)
  • 1.514 (5)
  • 1.5142 (5)
  • 1.5157 (5)
  • 1.5354 (5)
  • 1.5433 (5)
  • 1.5551 (5)
  • 1.565 (5)
  • 1.5748 (5)
to
Maximum Hole Depth [L4]
  • 2.5 (1)
  • 2.545 (1)
  • 2.5781 (1)
  • 2.6563 (1)
  • 2.7344 (1)
  • 2.811 (1)
  • 2.8898 (1)
  • 2.9688 (1)
  • 3.0469 (1)
  • 3.1496 (1)
  • 3.5433 (1)
  • 3.937 (2)
  • 4.3307 (1)
  • 4.7244 (3)
  • 5.1181 (4)
  • 5.5118 (1)
  • 5.9055 (1)
  • 6.299 (1)
  • 6.2992 (2)
  • 6.4055 (1)
  • 6.484 (1)
  • 6.563 (1)
  • 6.642 (1)
  • 6.72 (1)
  • 6.874 (1)
  • 7.031 (1)
  • 7.11 (1)
  • 7.189 (1)
  • 7.343 (1)
  • 7.5 (1)
  • 7.571 (1)
to
Maximum Hole Depth [L4]
  • 63.5 (1)
  • 64.643 (1)
  • 65.484 (1)
  • 67.47 (1)
  • 69.454 (1)
  • 71.4 (1)
  • 73.4 (1)
  • 75.408 (1)
  • 77.391 (1)
  • 80.0 (1)
  • 90.0 (1)
  • 100.0 (2)
  • 110.0 (1)
  • 120.0 (3)
  • 130.0 (4)
  • 140.0 (1)
  • 150.0 (1)
  • 160.0 (3)
  • 162.7 (1)
  • 164.7 (1)
  • 166.7 (1)
  • 168.7 (1)
  • 170.7 (1)
  • 174.6 (1)
  • 178.6 (1)
  • 180.6 (1)
  • 182.6 (1)
  • 186.5 (1)
  • 190.5 (1)
  • 192.3 (1)
to
Reach
  • 77.064 (1)
  • 77.927 (1)
  • 80.01 (1)
  • 82.042 (1)
  • 86.3 (1)
  • 89.078 (1)
  • 91.135 (1)
  • 93.2 (1)
  • 94.8 (1)
  • 99.187 (1)
  • 111.252 (1)
  • 129.286 (2)
  • 144.1 (1)
  • 148.59 (3)
  • 161.036 (1)
  • 161.544 (3)
  • 173.482 (1)
  • 185.42 (1)
  • 197.485 (2)
  • 207.5 (5)
  • 220.3 (3)
  • 232.9 (5)
to
Reach
  • 3.034 (1)
  • 3.068 (1)
  • 3.15 (1)
  • 3.23 (1)
  • 3.3976 (1)
  • 3.507 (1)
  • 3.588 (1)
  • 3.6693 (1)
  • 3.7323 (1)
  • 3.905 (1)
  • 4.38 (1)
  • 5.09 (2)
  • 5.6713 (1)
  • 5.85 (3)
  • 6.34 (1)
  • 6.36 (3)
  • 6.83 (1)
  • 7.3 (1)
  • 7.775 (2)
  • 8.1693 (5)
  • 8.6732 (3)
  • 9.1693 (5)
to
Connection Style
  • Cylindrical Shank 2 Flats (38)
Number of Flutes
  • 2 (38)
Cutting Edges Per Insert
  • 0.0 (38)
to
application
Grade Of Cutting Tool
  • KC7030 (14)
  • KC7135 (38)
  • KC7215 (2)
  • KC7235 (38)
  • KC7315 (38)
  • KC7320 (4)
  • KC7410 (38)
  • KCMS15 (38)
  • KCMS35 (38)
  • KCPM45 (38)
Hand Of Tool
  • R (38)
Drill Type
  • 86-01 (38)
frontEnd
Insert Shape
  • KSEM DRILL (38)
Point Angle
  • 140.0 (38)
  • 150.0 (38)
  • 180.0 (38)
to
backEnd
Connection Type
  • CYLINDRICAL (38)
Back-End Diameter
  • 0.75 (12)
  • 1.0 (7)
  • 1.25 (6)
  • 1.5 (13)
to
Back-End Diameter
  • 19.05 (12)
  • 25.4 (7)
  • 31.75 (6)
  • 38.1 (13)
to
other
Platform
  • KSEM (38)
Tool Unit
  • I (38)
Over All Length [L]
  • 150.8 (1)
  • 152.4 (2)
  • 155.575 (2)
  • 158.7 (1)
  • 160.3 (1)
  • 161.925 (1)
  • 165.1 (1)
  • 171.45 (1)
  • 184.15 (1)
  • 200.025 (1)
  • 228.6 (1)
  • 235.0 (1)
  • 244.475 (2)
  • 254.0 (1)
  • 257.175 (2)
  • 260.35 (1)
  • 266.7 (1)
  • 276.225 (1)
  • 288.925 (1)
  • 298.45 (2)
  • 317.55 (5)
  • 330.15 (3)
  • 342.85 (5)
to
Over All Length [L]
  • 5.937 (1)
  • 6.0 (2)
  • 6.125 (2)
  • 6.248 (1)
  • 6.311 (1)
  • 6.375 (1)
  • 6.5 (1)
  • 6.75 (1)
  • 7.25 (1)
  • 7.875 (1)
  • 9.0 (1)
  • 9.25 (1)
  • 9.625 (2)
  • 10.0 (1)
  • 10.125 (2)
  • 10.25 (1)
  • 10.5 (1)
  • 10.875 (1)
  • 11.375 (1)
  • 11.75 (2)
  • 12.502 (5)
  • 12.998 (3)
  • 13.498 (5)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 38 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Drill Diameter M [D1] Drill Diameter M [D1MAX] Drill Diameter Maximum [D1MAX] Drill Diameter Maximum [L1] Insert Gage Length [L1] Insert Gage Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L5] Drill Point Length [L5] Drill Point Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [SSC] Insert Seat Size [CS] Coolant Supply Size
1785284 KSEM0500R5SSF075 KSEM0500R5SSF075   12.7000 .5000 13.5000 .5310 100.0000 3.937 63.5000 2.500 2.2000 .0866 50.8 2.0 19.05 .75 C 1/8-27 NPT
    List price:
    $352.10 /each.
    Your price::
    Qty
    1785289 KSEM0563R5SSF075 KSEM0563R5SSF075   14.3000 .5630 14.5000 .5708 107.9000 4.248 71.4000 2.811 2.5000 .0984 50.8 2.0 19.05 .75 B 1/8-27 NPT
      List price:
      $366.70 /each.
      Your price::
      Qty
      1505138 KSEM0625R5SSF075 KSEM0625R5SSF075   15.8750 .6250 16.3750 .6447 120.6500 4.750 80.0000 3.149 2.5200 .0992 50.8 2.0 19.05 .75 1 1/8-27 NPT
        List price:
        $366.70 /each.
        Your price::
        Qty
        1505171 KSEM0688R5SSF075 KSEM0688R5SSF075   17.4630 .6875 17.9630 .7072 133.3500 5.250 90.0000 3.543 2.7720 .1091 50.8 2.0 19.05 .75 1 1/8-27 NPT
          List price:
          $379.60 /each.
          Your price::
          Qty
          1505179 KSEM0813R5SSF100 KSEM0813R5SSF100   20.6500 .8130 22.0000 .8650 158.8000 6.250 110.0000 4.330 3.6000 .1430 76.2 3.0 25.4 1.0 3 1/4-18 NPT
            List price:
            $434.30 /each.
            Your price::
            Qty
            1505180 KSEM0875R5SSF100 KSEM0875R5SSF100   22.2250 .8750 22.7250 .8947 168.2750 6.625 120.0000 4.724 3.5280 .1389 76.2 3.0 25.4 1.0 4 1/4-18 NPT
              List price:
              $462.20 /each.
              Your price::
              Qty
              1505183 KSEM0938R5SSF100 KSEM0938R5SSF100   23.8130 .9375 24.0000 .9448 168.2750