successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

Brocas modulares

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Material de la pieza de trabajo
Material de la pieza de trabajo
  • P Acero (2922)
    • P0
      Aceros con bajo contenido de carbono, virutas largas C < 0,25 %; <125 HB; <530 N/mm^2 UTS
      (2920)
    • P1
      Aceros con bajo contenido de carbono, virutas cortas C < 0,25 %; <125 HB; <530 N/mm^2 UTS
      (2920)
    • P2
      Aceros al carbono medios y altos C < 0,25 %; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (2920)
    • P3
      Aceros aleados y aceros para herramientas C > 0,25 %; <330 HB; <35 HRC; entre 600 y 850 N/mm^2 UTS
      (2920)
    • P4
      Aceros aleados y aceros para herramientas C > 0,25 %; entre 350 y 420 HB; entre 35 y 43 HRC; entre 850 y 1400 N/mm^2 UTS
      (2727)
    • P5
      Aceros ferríticos, martensíticos e inoxidables PH <330 HB; <35 HRC; entre 600 y 900 N/mm^2 UTS
      (2720)
    • P6
      Aceros ferríticos, martensíticos e inoxidables PH de alta resistencia Entre 350 y 450 HB; entre 35 y 43 HRC; entre 900 y 2400 N/mm^2 UTS
      (2691)
  • M Acero inoxidable (2364)
    • M1
      Acero inoxidable austenítico Entre 130 y 200 HB; <600 N/mm^2 UTS
      (2364)
    • M2
      Aceros inoxidables fundidos e inoxidables austeníticos de alta resistencia Entre 150 y 230 HB; <25 HRC; <600 N/mm^2 UTS
      (2364)
    • M3
      Acero inoxidable dúplex Entre 135 y 275 HB; <30 HRC; entre 500 y 1200 N/mm^2 UTS
      (2109)
  • K Fundición (2807)
    • K1
      Fundición gris Entre 120 y 290 HB; <32 HRC; entre 125 y 500 N/mm^2 UTS
      (2807)
    • K2
      Fundiciones dúctiles y CGI de baja y media resistencia Entre 130 y 260 HB; <28 HRC; <600 N/mm^2 UTS
      (2807)
    • K3
      Fundición austenítica y dúctil de alta resistencia Entre 180 y 350 HB; <43 HRC; >600 N/mm^2 UTS
      (2807)
  • N Materiales no ferrosos (1609)
    • N1
      Aluminio forjado
      (1608)
    • N2
      Aleaciones de aluminio bajo en silicio y aleaciones de magnesio Si <12,2 %
      (1608)
    • N3
      Aleaciones de aluminio con alto contenido en silicio Si >12,2 %
      (1608)
    • N4
      Base de cobre, latón, zinc en un rango de índice de maquinabilidad de 70–100
      (1588)
    • N5
      Nylon, plásticos, gomas, fenólicos, resinas y fibra de vidrio
      (1352)
    • N6
      Carbono, compuestos de grafito, CFRP
      (1343)
    • N7
      MMC
      (1158)
  • S Aleaciones de alta temperatura (1872)
    • S1
      Aleaciones basadas en hierro, resistentes al calor Entre 160 y 260 HB; entre 25 y 48 HRC; entre 500 y 1200 N/mm^2 UTS
      (1865)
    • S2
      Aleaciones basadas en cobalto, resistentes al calor Entre 250 y 450 HB; entre 25 y 48 HRC; entre 1000 y 1450 N/mm^2 UTS
      (1865)
    • S3
      Aleaciones basadas en níquel, resistentes al calor Entre 160 y 450 HB; <48 HRC; entre 600 y 1700 N/mm^2 UTS
      (1865)
    • S4
      Titanio y aleaciones de titanio Entre 300 y 450 HB; entre 33 y 43 HRC; entre 900 y 1600 N/mm^2 UTS
      (1872)
  • H Materiales endurecidos (220)
    • H1
      Materiales endurecidos 44-48 HRC
      (220)
    • H2
      Materiales endurecidos 48-55 HRC
      (110)
    • H3
      Materiales endurecidos 56-60 HRC
      (110)
    • H4
      Materiales endurecidos >60 HRC
      (110)
  • C Materiales CFRP (170)
    • C1
      CFRP, CFRP/CFRP
      (72)
    • C2
      CFRP/aluminio CFRP/materiales no ferrosos
      (165)
    • C3
      CFRP/titanio CFRP/altas temperaturas
      (165)
    • C4
      CFRP/acero inoxidable
      (165)
Seleccionar primera opción
  • BR (130)
  • CN (611)
  • DE (654)
  • GB (412)
  • IN (236)
  • SG (294)
  • US (695)
Aplicaciones
Aplicaciones
  • Chain Drilling Chain Drilling (6)
  • Convex Drilling Convex Drilling (6)
  • Corner Drilling 45° Corner Drilling 45° (6)
  • Counterboring Counterboring (40)
  • Countersinking Countersinking (82)
  • Cross Hole Drilling Cross Hole Drilling (6)
  • Drilling Drilling (1379)
  • Flat Bottom Drilling Flat Bottom Drilling (6)
  • Half Cylindrical Drilling Half Cylindrical Drilling (6)
  • Inclined Entry Drilling Inclined Entry Drilling (787)
  • Inclined Exit Drilling Inclined Exit Drilling (787)
  • Stacked Plates Drilling Stacked Plates Drilling (1177)
  • X-Offset Drilling X-Offset Drilling (6)
Diámetro del corte
Diámetro del corte
  • 0.374 in (36)
  • 0.375 in (37)
  • 0.394 in (37)
  • 0.402 in (37)
  • 0.406 in (36)
  • 0.408 in (36)
  • 0.414 in (67)
  • 0.433 in (36)
  • 0.437 in (37)
  • 0.453 in (36)
  • 0.492 in (64)
  • 0.496 in (54)
  • 0.5 in (64)
  • 0.504 in (58)
  • 0.512 in (74)
  • 0.516 in (62)
  • 0.52 in (61)
  • 0.531 in (99)
  • 0.535 in (48)
  • 0.539 in (46)
  • 0.543 in (51)
  • 0.547 in (51)
  • 0.551 in (68)
  • 0.555 in (58)
  • 0.559 in (54)
  • 0.564 in (63)
  • 0.568 in (46)
  • 0.572 in (57)
  • 0.576 in (48)
  • 0.578 in (50)
  • 0.583 in (49)
  • 0.591 in (73)
  • 0.594 in (59)
  • 0.602 in (55)
  • 0.609 in (52)
  • 0.61 in (66)
  • 0.614 in (48)
  • 0.618 in (47)
  • 0.622 in (49)
  • 0.625 in (50)
  • 0.63 in (67)
  • 0.634 in (66)
  • 0.636 in (41)
  • 0.638 in (61)
  • 0.641 in (61)
  • 0.65 in (66)
  • 0.654 in (53)
  • 0.656 in (55)
  • 0.669 in (69)
  • 0.672 in (57)
  • 0.687 in (42)
  • 0.69 in (67)
  • 0.694 in (51)
  • 0.698 in (52)
  • 0.702 in (51)
  • 0.704 in (51)
  • 0.705 in (47)
  • 0.709 in (55)
  • 0.719 in (45)
  • 0.72 in (38)
  • 0.724 in (37)
  • 0.728 in (56)
  • 0.732 in (43)
  • 0.734 in (45)
  • 0.74 in (39)
  • 0.744 in (37)
  • 0.748 in (75)
  • 0.75 in (68)
  • 0.756 in (59)
  • 0.757 in (58)
  • 0.758 in (59)
  • 0.759 in (61)
  • 0.762 in (56)
  • 0.766 in (62)
  • 0.768 in (75)
  • 0.776 in (47)
  • 0.781 in (50)
  • 0.787 in (47)
  • 0.797 in (39)
  • 0.807 in (56)
  • 0.814 in (47)
  • 0.816 in (38)
  • 0.828 in (65)
  • 0.846 in (39)
  • 0.875 in (42)
  • 0.884 in (37)
  • 0.886 in (47)
  • 0.906 in (39)
  • 0.925 in (45)
  • 0.946 in (38)
  • 0.984 in (62)
  • 0.987 in (45)
  • 0.994 in (39)
  • 0.996 in (39)
  • 1.0 in (49)
  • 1.004 in (49)
  • 1.006 in (38)
  • 1.008 in (38)
  • 1.012 in (42)
  • 1.016 in (39)
Diámetro del corte Min to Diámetro del corte Max
Diámetro del corte
Diámetro del corte
  • 9.5 mm (36)
  • 9.525 mm (37)
  • 10.0 mm (37)
  • 10.201 mm (37)
  • 10.3 mm (36)
  • 10.326 mm (36)
  • 10.5 mm (67)
  • 11.0 mm (36)
  • 11.101 mm (37)
  • 11.5 mm (36)
  • 12.5 mm (64)
  • 12.601 mm (54)
  • 12.701 mm (64)
  • 12.8 mm (58)
  • 13.0 mm (74)
  • 13.101 mm (62)
  • 13.201 mm (61)
  • 13.5 mm (99)
  • 13.601 mm (48)
  • 13.701 mm (46)
  • 13.8 mm (51)
  • 13.9 mm (51)
  • 14.0 mm (68)
  • 14.101 mm (58)
  • 14.201 mm (54)
  • 14.3 mm (63)
  • 14.4 mm (46)
  • 14.5 mm (57)
  • 14.601 mm (48)
  • 14.675 mm (50)
  • 14.8 mm (49)
  • 15.0 mm (73)
  • 15.076 mm (59)
  • 15.3 mm (55)
  • 15.476 mm (52)
  • 15.5 mm (66)
  • 15.601 mm (48)
  • 15.701 mm (47)
  • 15.8 mm (49)
  • 15.875 mm (50)
  • 16.0 mm (67)
  • 16.1 mm (66)
  • 16.151 mm (41)
  • 16.2 mm (61)
  • 16.276 mm (61)
  • 16.5 mm (66)
  • 16.6 mm (53)
  • 16.675 mm (55)
  • 17.0 mm (69)
  • 17.075 mm (57)
  • 17.45 mm (42)
  • 17.5 mm (67)
  • 17.6 mm (51)
  • 17.7 mm (52)
  • 17.8 mm (51)
  • 17.85 mm (51)
  • 17.901 mm (47)
  • 18.0 mm (55)
  • 18.25 mm (45)
  • 18.3 mm (38)
  • 18.401 mm (37)
  • 18.5 mm (56)
  • 18.6 mm (43)
  • 18.651 mm (45)
  • 18.8 mm (39)
  • 18.901 mm (37)
  • 19.0 mm (75)
  • 19.05 mm (68)
  • 19.201 mm (59)
  • 19.225 mm (58)
  • 19.25 mm (59)
  • 19.276 mm (61)
  • 19.35 mm (56)
  • 19.451 mm (62)
  • 19.5 mm (75)
  • 19.701 mm (47)
  • 19.85 mm (50)
  • 20.0 mm (47)
  • 20.25 mm (39)
  • 20.5 mm (56)
  • 20.651 mm (47)
  • 20.701 mm (38)
  • 21.0 mm (65)
  • 21.5 mm (39)
  • 22.225 mm (42)
  • 22.451 mm (37)
  • 22.5 mm (47)
  • 23.0 mm (39)
  • 23.5 mm (45)
  • 24.0 mm (38)
  • 25.0 mm (62)
  • 25.076 mm (45)
  • 25.25 mm (39)
  • 25.3 mm (39)
  • 25.401 mm (49)
  • 25.5 mm (49)
  • 25.55 mm (38)
  • 25.6 mm (38)
  • 25.675 mm (41)
  • 25.8 mm (39)
Diámetro del corte Min to Diámetro del corte Max
Condiciones del corte
Condiciones del corte
  • Interrupted (72)
  • Stable (79)
  • Unstable (74)
Profundidad de taladrado máxima [L4]
Profundidad de taladrado máxima [L4]
  • 16.0 mm (3)
  • 18.0 mm (4)
  • 19.0 mm (3)
  • 20.0 mm (22)
  • 21.0 mm (4)
  • 22.0 mm (10)
  • 23.0 mm (3)
  • 24.0 mm (6)
  • 25.0 mm (37)
  • 25.5 mm (4)
  • 26.0 mm (7)
  • 27.0 mm (9)
  • 28.5 mm (4)
  • 29.0 mm (5)
  • 30.0 mm (42)
  • 31.5 mm (7)
  • 32.0 mm (9)
  • 33.0 mm (11)
  • 34.5 mm (4)
  • 35.0 mm (24)
  • 36.0 mm (21)
  • 37.5 mm (4)
  • 38.0 mm (8)
  • 39.0 mm (9)
  • 40.0 mm (24)
  • 40.5 mm (4)
  • 41.0 mm (4)
  • 42.0 mm (13)
  • 42.5 mm (3)
  • 43.0 mm (5)
  • 43.5 mm (6)
  • 44.0 mm (4)
  • 45.0 mm (26)
  • 47.5 mm (4)
  • 48.0 mm (21)
  • 50.0 mm (21)
  • 51.0 mm (9)
  • 53.0 mm (8)
  • 54.0 mm (13)
  • 55.0 mm (8)
  • 57.0 mm (8)
  • 58.0 mm (6)
  • 59.95 mm (6)
  • 60.0 mm (24)
  • 63.0 mm (10)
  • 65.0 mm (8)
  • 66.0 mm (7)
  • 68.0 mm (11)
  • 70.0 mm (13)
  • 72.0 mm (15)
  • 72.5 mm (4)
  • 73.0 mm (5)
  • 75.0 mm (11)
  • 76.0 mm (8)
  • 78.0 mm (9)
  • 80.0 mm (23)
  • 84.0 mm (13)
  • 85.0 mm (8)
  • 88.0 mm (7)
  • 89.926 mm (6)
  • 90.0 mm (21)
  • 92.0 mm (7)
  • 95.0 mm (10)
  • 96.0 mm (17)
  • 98.0 mm (4)
  • 99.0 mm (5)
  • 100.0 mm (26)
  • 102.0 mm (5)
  • 104.0 mm (7)
  • 105.0 mm (10)
  • 108.0 mm (13)
  • 110.0 mm (9)
  • 111.0 mm (5)
  • 112.0 mm (14)
  • 114.0 mm (4)
  • 116.0 mm (8)
  • 117.0 mm (4)
  • 120.0 mm (25)
  • 125.0 mm (4)
  • 126.0 mm (7)
  • 128.0 mm (8)
  • 130.0 mm (17)
  • 136.0 mm (8)
  • 140.0 mm (17)
  • 144.0 mm (8)
  • 150.0 mm (13)
  • 152.0 mm (5)
  • 154.0 mm (6)
  • 160.0 mm (19)
  • 165.0 mm (4)
  • 168.0 mm (14)
  • 180.0 mm (5)
  • 182.0 mm (8)
  • 185.0 mm (5)
  • 190.5 mm (5)
  • 196.0 mm (7)
  • 200.0 mm (5)
  • 210.0 mm (7)
  • 224.0 mm (8)
  • 254.0 mm (4)
Profundidad de taladrado máxima [L4] Min to Profundidad de taladrado máxima [L4] Max
Profundidad de taladrado máxima [L4]
Profundidad de taladrado máxima [L4]
  • 0.63 in (3)
  • 0.709 in (4)
  • 0.748 in (3)
  • 0.787 in (22)
  • 0.828 in (4)
  • 0.866 in (10)
  • 0.906 in (3)
  • 0.946 in (6)
  • 0.984 in (37)
  • 1.004 in (4)
  • 1.024 in (7)
  • 1.063 in (9)
  • 1.122 in (4)
  • 1.143 in (5)
  • 1.181 in (42)
  • 1.24 in (7)
  • 1.26 in (9)
  • 1.299 in (11)
  • 1.358 in (4)
  • 1.379 in (24)
  • 1.417 in (21)
  • 1.476 in (4)
  • 1.496 in (8)
  • 1.536 in (9)
  • 1.575 in (24)
  • 1.594 in (6)
  • 1.614 in (4)
  • 1.655 in (13)
  • 1.693 in (5)
  • 1.713 in (6)
  • 1.732 in (4)
  • 1.772 in (26)
  • 1.87 in (4)
  • 1.891 in (21)
  • 1.969 in (21)
  • 2.008 in (9)
  • 2.087 in (8)
  • 2.126 in (13)
  • 2.165 in (8)
  • 2.244 in (8)
  • 2.283 in (6)
  • 2.36 in (6)
  • 2.362 in (24)
  • 2.48 in (10)
  • 2.559 in (8)
  • 2.598 in (7)
  • 2.657 in (5)
  • 2.677 in (11)
  • 2.757 in (13)
  • 2.835 in (15)
  • 2.854 in (4)
  • 2.874 in (5)
  • 2.953 in (11)
  • 2.992 in (8)
  • 3.071 in (11)
  • 3.15 in (23)
  • 3.307 in (13)
  • 3.346 in (8)
  • 3.465 in (7)
  • 3.54 in (6)
  • 3.543 in (21)
  • 3.622 in (7)
  • 3.74 in (10)
  • 3.781 in (17)
  • 3.858 in (4)
  • 3.898 in (5)
  • 3.938 in (28)
  • 4.016 in (5)
  • 4.094 in (7)
  • 4.134 in (10)
  • 4.252 in (13)
  • 4.331 in (9)
  • 4.37 in (5)
  • 4.409 in (14)
  • 4.488 in (4)
  • 4.567 in (8)
  • 4.606 in (4)
  • 4.724 in (25)
  • 4.921 in (4)
  • 4.961 in (7)
  • 5.039 in (8)
  • 5.118 in (17)
  • 5.354 in (8)
  • 5.513 in (17)
  • 5.67 in (8)
  • 5.906 in (13)
  • 5.984 in (5)
  • 6.063 in (6)
  • 6.299 in (19)
  • 6.496 in (4)
  • 6.614 in (14)
  • 7.087 in (5)
  • 7.165 in (8)
  • 7.283 in (5)
  • 7.5 in (5)
  • 7.718 in (7)
  • 7.875 in (6)
  • 8.268 in (7)
  • 8.819 in (8)
  • 10.0 in (4)
Profundidad de taladrado máxima [L4] Min to Profundidad de taladrado máxima [L4] Max
Alcance
Alcance
  • 0.787 in (17)
  • 0.866 in (7)
  • 0.917 in (9)
  • 0.935 in (8)
  • 0.944 in (7)
  • 0.984 in (14)
  • 1.101 in (6)
  • 1.114 in (7)
  • 1.147 in (3)
  • 1.181 in (18)
  • 1.22 in (3)
  • 1.272 in (9)
  • 1.298 in (8)
  • 1.379 in (3)
  • 1.417 in (12)
  • 1.465 in (3)
  • 1.469 in (11)
  • 1.491 in (9)
  • 1.518 in (9)
  • 1.614 in (3)
  • 1.622 in (4)
  • 1.666 in (13)
  • 1.693 in (3)
  • 1.697 in (3)
  • 1.703 in (7)
  • 1.863 in (3)
  • 1.885 in (9)
  • 1.911 in (5)
  • 1.929 in (4)
  • 1.965 in (3)
  • 2.075 in (3)
  • 2.126 in (5)
  • 2.185 in (3)
  • 2.205 in (4)
  • 2.217 in (5)
  • 2.236 in (4)
  • 2.283 in (5)
  • 2.323 in (7)
  • 2.331 in (3)
  • 2.41 in (6)
  • 2.441 in (3)
  • 2.524 in (4)
  • 2.592 in (3)
  • 2.598 in (4)
  • 2.677 in (7)
  • 2.701 in (3)
  • 2.717 in (4)
  • 2.781 in (3)
  • 2.874 in (4)
  • 2.953 in (8)
  • 2.967 in (3)
  • 3.011 in (3)
  • 3.035 in (5)
  • 3.092 in (3)
  • 3.13 in (4)
  • 3.269 in (7)
  • 3.426 in (7)
  • 3.511 in (8)
  • 3.622 in (6)
  • 3.785 in (4)
  • 3.938 in (10)
  • 3.96 in (5)
  • 4.291 in (6)
  • 4.34 in (4)
  • 4.37 in (4)
  • 4.529 in (5)
  • 4.606 in (4)
  • 4.843 in (4)
  • 4.921 in (6)
  • 5.09 in (5)
  • 5.093 in (5)
  • 5.197 in (4)
  • 5.218 in (4)
  • 5.315 in (4)
  • 5.343 in (6)
  • 5.787 in (5)
  • 5.827 in (10)
  • 5.843 in (6)
  • 5.851 in (4)
  • 6.024 in (5)
  • 6.339 in (5)
  • 6.343 in (4)
  • 6.417 in (4)
  • 6.718 in (4)
  • 6.811 in (4)
  • 6.843 in (4)
  • 7.087 in (4)
  • 7.283 in (4)
  • 7.718 in (9)
  • 7.835 in (4)
  • 7.843 in (4)
  • 8.169 in (5)
  • 8.387 in (6)
  • 8.467 in (4)
  • 9.016 in (4)
  • 9.169 in (5)
  • 9.59 in (5)
  • 9.646 in (4)
  • 10.342 in (4)
  • 10.355 in (4)
Alcance Min