successfully added to cart
View Cart

Sistema de brocas modulares KSEM

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Select First Choice
  • CN (265)
  • DE (245)
  • GB (197)
  • IN (147)
  • US (258)
Applications
  • Countersinking Countersinking (52)
  • Drilling Drilling (605)
  • Inclined Entry Drilling Inclined Entry Drilling (549)
  • Inclined Exit Drilling Inclined Exit Drilling (549)
  • Stacked Plates Drilling Stacked Plates Drilling (549)
Workpiece Material
  • P Steel (1399)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1399)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1399)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1399)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1399)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1203)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1203)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1164)
  • M Stainless Steel (1070)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1070)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1070)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1070)
  • K Cast Iron (1091)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1091)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1091)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1091)
  • N Non-Ferrous Materials (954)
    • N1
      Wrought Aluminum
      (954)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (954)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (954)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (954)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (874)
    • N6
      Carbon, Graphite Composites, CFRP
      (874)
    • N7
      MMC's
      (874)
  • S High-Temp Alloys (954)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (954)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (954)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (954)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (954)
  • H Hardened Materials (39)
    • H1
      Hardened Materials 44-48 HRC
      (39)
    • H2
      Hardened Materials 48-55 HRC
      (39)
    • H3
      Hardened Materials 56-60 HRC
      (39)
    • H4
      Hardened Materials >60 HRC
      (39)
Cutting Diameter
  • 12.5 (29)
  • 12.6 (22)
  • 12.7 (27)
  • 12.8 (25)
  • 12.93 (25)
  • 13.0 (38)
  • 13.1 (28)
  • 13.2 (27)
  • 13.5 (30)
  • 13.6 (16)
  • 13.7 (15)
  • 13.8 (17)
  • 13.89 (16)
  • 14.0 (31)
  • 14.1 (23)
  • 14.15 (19)
  • 14.2 (21)
  • 14.29 (23)
  • 14.4 (14)
  • 14.5 (24)
  • 14.6 (16)
  • 14.68 (18)
  • 14.8 (17)
  • 15.0 (37)
  • 15.08 (28)
  • 15.3 (21)
  • 15.48 (21)
  • 15.5 (31)
  • 15.6 (17)
  • 15.7 (15)
  • 15.8 (17)
  • 15.875 (9)
  • 15.88 (15)
  • 16.0 (30)
  • 16.04 (23)
  • 16.09 (27)
  • 16.1 (23)
  • 16.15 (24)
  • 16.19 (23)
  • 16.2 (27)
  • 16.27 (28)
  • 16.5 (31)
  • 16.6 (20)
  • 16.67 (20)
  • 17.0 (33)
  • 17.07 (26)
  • 17.35 (18)
  • 17.46 (23)
  • 17.5 (32)
  • 17.6 (18)
  • 17.7 (18)
  • 17.75 (18)
  • 17.8 (18)
  • 17.86 (21)
  • 17.9 (17)
  • 18.0 (22)
  • 18.26 (14)
  • 18.3 (10)
  • 18.39 (9)
  • 18.5 (24)
  • 18.6 (15)
  • 18.65 (17)
  • 18.8 (10)
  • 18.9 (10)
  • 19.0 (43)
  • 19.05 (38)
  • 19.2 (30)
  • 19.228 (31)
  • 19.23 (29)
  • 19.25 (32)
  • 19.27 (33)
  • 19.32 (29)
  • 19.35 (30)
  • 19.36 (28)
  • 19.38 (28)
  • 19.45 (33)
  • 19.5 (45)
  • 19.65 (20)
  • 19.7 (20)
  • 19.84 (21)
  • 20.0 (18)
  • 20.03 (10)
  • 20.1 (11)
  • 20.24 (16)
  • 20.35 (11)
  • 20.5 (29)
  • 20.64 (22)
  • 20.7 (17)
  • 21.0 (29)
  • 21.1 (18)
  • 21.15 (13)
  • 21.2 (13)
  • 21.33 (14)
  • 21.43 (16)
  • 21.5 (27)
  • 21.7 (16)
  • 21.83 (19)
  • 22.0 (23)
  • 22.1 (25)
  • 22.15 (24)
  • 22.23 (29)
  • 22.44 (28)
  • 22.5 (35)
  • 22.62 (25)
  • 22.77 (12)
  • 23.0 (26)
  • 23.05 (15)
  • 23.1 (15)
  • 23.25 (15)
  • 23.3 (15)
  • 23.42 (19)
  • 23.5 (33)
  • 23.6 (16)
  • 23.7 (18)
  • 23.81 (22)
  • 24.0 (25)
  • 24.3 (5)
  • 24.5 (23)
  • 24.61 (18)
  • 24.7 (14)
  • 25.0 (49)
  • 25.07 (37)
  • 25.25 (31)
  • 25.3 (31)
  • 25.4 (37)
  • 25.5 (38)
  • 25.54 (30)
  • 25.6 (28)
  • 25.61 (25)
  • 25.65 (26)
  • 25.654 (26)
  • 25.67 (30)
  • 25.72 (25)
  • 25.76 (25)
  • 25.8 (24)
  • 25.806 (24)
  • 25.81 (28)
  • 26.0 (23)
  • 26.19 (17)
  • 26.3 (11)
  • 26.5 (24)
  • 26.53 (13)
  • 26.59 (15)
  • 26.7 (12)
  • 27.0 (28)
  • 27.5 (26)
  • 27.78 (14)
  • 28.0 (23)
  • 28.1 (9)
  • 28.18 (12)
  • 28.35 (9)
  • 28.5 (27)
  • 28.58 (21)
  • 29.0 (30)
  • 29.37 (16)
  • 29.5 (25)
  • 29.55 (13)
  • 29.73 (14)
  • 29.77 (17)
  • 30.0 (20)
  • 30.16 (17)
  • 30.5 (29)
  • 30.56 (19)
  • 30.96 (14)
  • 31.0 (23)
  • 31.15 (11)
  • 31.25 (10)
  • 31.5 (28)
  • 31.75 (26)
  • 32.0 (31)
  • 32.2 (8)
  • 32.34 (8)
  • 32.5 (18)
  • 32.54 (16)
  • 32.94 (14)
  • 33.0 (28)
  • 33.34 (21)
  • 33.4 (19)
  • 33.5 (22)
  • 33.73 (19)
  • 34.0 (31)
  • 34.13 (23)
  • 34.5 (24)
  • 34.93 (23)
  • 35.0 (31)
  • 35.5 (25)
  • 35.72 (24)
  • 36.0 (32)
  • 36.12 (11)
  • 36.5 (15)
  • 36.51 (14)
  • 37.0 (25)
  • 37.31 (17)
  • 37.5 (19)
  • 38.0 (31)
  • 38.1 (26)
  • 38.46 (24)
  • 38.5 (21)
  • 39.0 (30)
  • 39.2 (19)
  • 39.5 (17)
  • 39.75 (15)
  • 40.0 (26)
to
Cutting Diameter
  • 0.4921 (29)
  • 0.4961 (22)
  • 0.5 (27)
  • 0.5039 (25)
  • 0.509 (24)
  • 0.5091 (22)
  • 0.5118 (38)
  • 0.5157 (26)
  • 0.516 (27)
  • 0.5197 (27)
  • 0.531 (27)
  • 0.5315 (25)
  • 0.5354 (16)
  • 0.5394 (15)
  • 0.5433 (17)
  • 0.5469 (13)
  • 0.547 (16)
  • 0.5512 (31)
  • 0.5551 (23)
  • 0.5571 (19)
  • 0.5591 (21)
  • 0.5626 (19)
  • 0.563 (22)
  • 0.5669 (14)
  • 0.5709 (24)
  • 0.5748 (16)
  • 0.578 (18)
  • 0.5827 (17)
  • 0.5906 (37)
  • 0.5937 (26)
  • 0.594 (26)
  • 0.6024 (21)
  • 0.609 (21)
  • 0.6094 (19)
  • 0.6102 (31)
  • 0.6142 (17)
  • 0.6181 (15)
  • 0.622 (17)
  • 0.625 (13)
  • 0.6252 (11)
  • 0.6299 (30)
  • 0.6315 (23)
  • 0.6335 (23)
  • 0.6339 (23)
  • 0.634 (26)
  • 0.6358 (24)
  • 0.6374 (23)
  • 0.6378 (27)
  • 0.6406 (24)
  • 0.641 (26)
  • 0.6496 (31)
  • 0.6535 (20)
  • 0.656 (18)
  • 0.6563 (16)
  • 0.6693 (33)
  • 0.672 (26)
  • 0.6831 (18)
  • 0.6874 (19)
  • 0.6875 (21)
  • 0.688 (17)
  • 0.689 (32)
  • 0.6929 (18)
  • 0.6969 (18)
  • 0.6988 (18)
  • 0.7008 (18)
  • 0.703 (19)
  • 0.7031 (19)
  • 0.7047 (17)
  • 0.7087 (22)
  • 0.7189 (12)
  • 0.719 (11)
  • 0.7205 (10)
  • 0.724 (9)
  • 0.7283 (24)
  • 0.7323 (15)
  • 0.734 (17)
  • 0.7402 (10)
  • 0.7441 (10)
  • 0.748 (43)
  • 0.75 (38)
  • 0.7559 (30)
  • 0.757 (31)
  • 0.7571 (29)
  • 0.7579 (32)
  • 0.7587 (29)
  • 0.759 (32)
  • 0.7606 (29)
  • 0.7618 (30)
  • 0.7622 (28)
  • 0.763 (28)
  • 0.7657 (31)
  • 0.766 (30)
  • 0.7677 (45)
  • 0.7736 (20)
  • 0.7756 (20)
  • 0.781 (18)
  • 0.7811 (17)
  • 0.7874 (18)
  • 0.7886 (10)
  • 0.7913 (11)
  • 0.7969 (14)
  • 0.797 (12)
  • 0.8012 (11)
  • 0.8071 (29)
  • 0.8125 (20)
  • 0.8126 (18)
  • 0.815 (17)
  • 0.8268 (29)
  • 0.8307 (18)
  • 0.8327 (13)
  • 0.8346 (13)
  • 0.8398 (14)
  • 0.8437 (12)
  • 0.844 (16)
  • 0.846 (24)
  • 0.8465 (22)
  • 0.8543 (16)
  • 0.859 (19)
  • 0.8661 (23)
  • 0.8701 (25)
  • 0.872 (24)
  • 0.875 (25)
  • 0.8752 (27)
  • 0.8835 (26)
  • 0.884 (25)
  • 0.8858 (35)
  • 0.8906 (25)
  • 0.8965 (12)
  • 0.9055 (26)
  • 0.9075 (15)
  • 0.9094 (15)
  • 0.9154 (15)
  • 0.9173 (15)
  • 0.922 (19)
  • 0.9252 (33)
  • 0.9291 (16)
  • 0.9331 (18)
  • 0.9374 (18)
  • 0.9375 (20)
  • 0.938 (16)
  • 0.9449 (25)
  • 0.9567 (5)
  • 0.9646 (23)
  • 0.9689 (14)
  • 0.969 (17)
  • 0.9724 (14)
  • 0.9843 (49)
  • 0.987 (37)
  • 0.9941 (31)
  • 0.9961 (31)
  • 1.0 (37)
  • 1.0039 (38)
  • 1.0055 (30)
  • 1.0079 (25)
  • 1.008 (28)
  • 1.0098 (26)
  • 1.01 (26)
  • 1.0106 (29)
  • 1.011 (25)
  • 1.0126 (25)
  • 1.0142 (25)
  • 1.0157 (24)
  • 1.016 (24)
  • 1.0161 (28)
  • 1.0236 (23)
  • 1.031 (14)
  • 1.0311 (13)
  • 1.0354 (11)
  • 1.0433 (24)
  • 1.0445 (13)
  • 1.0469 (12)
  • 1.047 (15)
  • 1.0512 (12)
  • 1.063 (28)
  • 1.0827 (26)
  • 1.0937 (11)
  • 1.094 (22)
  • 1.1024 (23)
  • 1.1063 (9)
  • 1.109 (12)
  • 1.1161 (9)
  • 1.122 (27)
  • 1.125 (20)
  • 1.1252 (16)
  • 1.1417 (30)
  • 1.1563 (16)
  • 1.1614 (25)
  • 1.1634 (13)
  • 1.1705 (14)
  • 1.172 (17)
  • 1.1811 (20)
  • 1.1875 (17)
  • 1.2008 (29)
  • 1.203 (19)
  • 1.219 (14)
  • 1.2205 (23)
  • 1.2264 (11)
  • 1.2303 (10)
  • 1.2402 (28)
  • 1.25 (26)
  • 1.2598 (31)
  • 1.2677 (8)
  • 1.2732 (8)
  • 1.2795 (18)
  • 1.281 (14)
  • 1.2811 (15)
  • 1.297 (14)
  • 1.2992 (28)
  • 1.313 (22)
  • 1.3189 (22)
  • 1.328 (19)
  • 1.3386 (31)
  • 1.344 (23)
  • 1.3583 (24)
  • 1.375 (23)
  • 1.378 (31)
  • 1.3976 (25)
  • 1.406 (24)
  • 1.4173 (32)
  • 1.422 (11)
  • 1.437 (14)
  • 1.4374 (14)
  • 1.4375 (13)
  • 1.4567 (25)
  • 1.469 (17)
  • 1.4764 (19)
  • 1.4961 (31)
  • 1.5 (26)
  • 1.514 (21)
  • 1.5142 (23)
  • 1.5157 (21)
  • 1.5354 (30)
  • 1.5433 (19)
  • 1.5551 (17)
  • 1.565 (15)
  • 1.5748 (26)
to
Maximum Hole Depth [L4]
  • 0.53 (1)
  • 0.5315 (2)
  • 0.5709 (1)
  • 0.61 (1)
  • 0.622 (1)
  • 0.6299 (1)
  • 0.63 (1)
  • 0.7087 (2)
  • 0.71 (1)
  • 0.7165 (1)
  • 0.78 (1)
  • 0.7811 (1)
  • 0.7874 (1)
  • 0.8661 (2)
  • 0.87 (1)
  • 0.9449 (2)
  • 0.95 (1)
  • 1.02 (1)
  • 1.0236 (1)
  • 1.1024 (3)
  • 1.11 (1)
  • 1.18 (1)
  • 1.1811 (2)
  • 1.2598 (1)
  • 1.26 (1)
  • 1.27 (1)
  • 1.4173 (2)
  • 1.42 (1)