Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Torneado de rosca

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Select First Choice
  • DE (63)
  • GB (41)
Applications
  • Chamfer Turning Chamfer Turning (4)
  • Cut-Off Cut-Off (4)
  • Deep Grooving Deep Grooving (4)
  • Face Grooving Face Grooving (245)
  • Facing Facing (4)
  • Grooving Grooving (167)
  • ID Grooving ID Grooving (98)
  • ID Thread Turning ID Thread Turning (876)
  • Multiple Direction Cutting Multiple Direction Cutting (4)
  • OD Thread Turning OD Thread Turning (1150)
  • Plunge Turning Plunge Turning (4)
  • Profiling Profiling (4)
  • Threading Threading (240)
  • Turning Turning (4)
Workpiece Material
  • P Steel (2153)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2153)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2153)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (2153)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (2153)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (2153)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (2153)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (2153)
  • M Stainless Steel (2153)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (2153)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (2153)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (2153)
  • K Cast Iron (2139)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (2139)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (2139)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (2139)
  • N Non-Ferrous Materials (1105)
    • N1
      Wrought Aluminum
      (1105)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1048)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1043)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1104)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1048)
    • N6
      Carbon, Graphite Composites, CFRP
      (1048)
    • N7
      MMC's
      (1042)
  • S High-Temp Alloys (2214)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (2214)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (2214)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (2214)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (2214)
  • H Hardened Materials (1042)
    • H1
      Hardened Materials 44-48 HRC
      (1042)
    • H2
      Hardened Materials 48-55 HRC
      (229)
    • H3
      Hardened Materials 56-60 HRC
      (141)
    • H4
      Hardened Materials >60 HRC
      (141)
Type of Thread
  • 55 (171)
  • 60 (639)
  • ACME (486)
  • API (303)
  • API BUTTRESS (53)
  • API RD (226)
  • BSPT (113)
  • BSW (335)
  • BUTTRESS (293)
  • M (445)
  • NPT (265)
  • NPTF (112)
  • RD DIN 405 (143)
  • STUB ACME (305)
  • TR DIN 103 (147)
  • UN (792)
  • UNJ (428)
Cutting Condition
  • Heavily Interrupted Cut (258)
  • Lightly Interrupted Cut (258)
  • Smooth Cut (258)
  • Varying Depth of Cut (258)
Cutting Condition Material
  • H-All (258)
  • K-All (258)
  • M-All (258)
  • N-All (258)
  • P-All (258)
  • S-All (258)
Tool Cutting Edge Angle
  • 90.0 (419)
to
Connection Style
  • Bolt-On Head (44)
  • Boring Bar Shank (128)
  • KM (17)
  • Toolholder (168)
Cutting Edges Per Insert
  • 0.0 (9)
  • 1.0 (242)
  • 2.0 (1398)
  • 3.0 (917)
  • 4.0 (9)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.026 (1)
  • 0.03 (22)
  • 0.033 (10)
  • 0.038 (25)
  • 0.046 (2)
  • 0.051 (181)
  • 0.054 (1)
  • 0.057 (41)
  • 0.062 (1)
  • 0.066 (87)
  • 0.07 (35)
  • 0.071 (30)
  • 0.073 (1)
  • 0.076 (466)
  • 0.08 (197)
  • 0.081 (25)
  • 0.082 (2)
  • 0.085 (2)
  • 0.086 (31)
  • 0.088 (1)
  • 0.089 (88)
  • 0.09 (88)
  • 0.091 (31)
  • 0.094 (89)
  • 0.097 (63)
  • 0.1 (228)
  • 0.102 (242)
  • 0.114 (9)
  • 0.116 (49)
  • 0.117 (41)
  • 0.127 (100)
  • 0.131 (99)
  • 0.132 (90)
  • 0.133 (93)
  • 0.135 (30)
  • 0.15 (99)
  • 0.152 (37)
  • 0.155 (88)
  • 0.157 (96)
  • 0.159 (31)
  • 0.16 (93)
  • 0.165 (305)
  • 0.173 (105)
  • 0.178 (136)
  • 0.185 (47)
  • 0.19 (229)
  • 0.191 (251)
  • 0.198 (108)
  • 0.2 (97)
  • 0.202 (140)
  • 0.203 (54)
  • 0.21 (35)
  • 0.223 (30)
  • 0.224 (111)
  • 0.225 (8)
  • 0.235 (92)
  • 0.24 (2)
  • 0.244 (51)
  • 0.25 (133)
  • 0.251 (130)
  • 0.254 (221)
  • 0.269 (121)
  • 0.279 (57)
  • 0.282 (92)
  • 0.284 (100)
  • 0.3 (94)
  • 0.305 (25)
  • 0.31 (2)
  • 0.315 (122)
  • 0.318 (176)
  • 0.33 (116)
  • 0.34 (101)
  • 0.343 (64)
  • 0.356 (101)
  • 0.381 (30)
  • 0.404 (91)
  • 0.406 (121)
  • 0.43 (99)
  • 0.432 (51)
  • 0.445 (167)
  • 0.472 (48)
  • 0.49 (108)
  • 0.5 (88)
  • 0.508 (86)
  • 0.51 (2)
  • 0.52 (5)
  • 0.533 (29)
  • 0.565 (26)
  • 0.57 (41)
  • 0.572 (171)
  • 0.575 (100)
  • 0.64 (4)
  • 0.65 (6)
  • 0.7 (23)
  • 0.75 (88)
  • 0.76 (32)
  • 0.787 (174)
  • 0.826 (21)
  • 0.902 (162)
  • 0.93 (14)
  • 0.97 (3)
  • 0.99 (7)
  • 1.0 (174)
  • 1.01 (17)
  • 1.194 (174)
  • 1.195 (41)
  • 1.25 (174)
  • 1.5 (174)
  • 1.515 (1)
  • 1.585 (86)
  • 1.588 (229)
  • 1.59 (26)
  • 1.75 (174)
  • 1.98 (41)
  • 1.981 (86)
  • 2.0 (141)
  • 2.25 (141)
  • 2.388 (141)
  • 2.39 (29)
  • 2.5 (55)
  • 3.175 (55)
  • 3.18 (26)
to
Corner Radius
  • 0.001 (1)
  • 0.0012 (22)
  • 0.0013 (10)
  • 0.0015 (25)
  • 0.0018 (2)
  • 0.002 (181)
  • 0.0021 (1)
  • 0.0023 (41)
  • 0.0024 (1)
  • 0.0026 (87)
  • 0.0028 (66)
  • 0.0029 (1)
  • 0.003 (466)
  • 0.0031 (176)
  • 0.0032 (27)
  • 0.0033 (2)
  • 0.0034 (31)
  • 0.0035 (89)
  • 0.0037 (89)
  • 0.0038 (63)
  • 0.0039 (2)
  • 0.004 (294)
  • 0.0045 (9)
  • 0.0046 (90)
  • 0.005 (100)
  • 0.0052 (103)
  • 0.0053 (123)
  • 0.0059 (99)
  • 0.006 (125)
  • 0.0062 (96)
  • 0.0063 (53)
  • 0.0065 (321)
  • 0.0068 (105)
  • 0.007 (136)
  • 0.0075 (251)
  • 0.0078 (108)
  • 0.0079 (45)
  • 0.008 (205)
  • 0.0083 (35)
  • 0.0088 (141)
  • 0.0089 (8)
  • 0.0093 (92)
  • 0.0094 (2)
  • 0.0096 (51)
  • 0.0099 (130)
  • 0.01 (221)
  • 0.0106 (120)
  • 0.011 (57)
  • 0.0111 (92)
  • 0.0112 (100)
  • 0.0118 (94)
  • 0.012 (25)
  • 0.0122 (2)
  • 0.0124 (96)
  • 0.0125 (176)
  • 0.013 (116)
  • 0.0135 (165)
  • 0.014 (101)
  • 0.015 (30)
  • 0.0159 (91)
  • 0.016 (121)
  • 0.017 (150)
  • 0.0175 (167)
  • 0.0186 (48)
  • 0.0193 (108)
  • 0.0197 (88)
  • 0.02 (93)
  • 0.021 (29)
  • 0.0225 (171)
  • 0.025 (4)
  • 0.026 (6)
  • 0.0276 (23)
  • 0.0295 (88)
  • 0.0298 (32)
  • 0.031 (174)
  • 0.0325 (21)
  • 0.0355 (162)
  • 0.0368 (14)
  • 0.038 (3)
  • 0.039 (7)
  • 0.0394 (174)
  • 0.0398 (17)
  • 0.047 (174)
  • 0.0492 (174)
  • 0.0591 (174)
  • 0.0597 (1)
  • 0.0625 (229)
  • 0.0689 (174)
  • 0.078 (86)
  • 0.0787 (141)
  • 0.0886 (141)
  • 0.094 (141)
  • 0.0984 (55)
  • 0.106 (42)
  • 0.125 (55)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K1 (8)
  • K2885 (177)
  • K313 (241)
  • K420 (271)
  • K4H (129)
  • K68 (373)
  • KB1345 (141)
  • KB1630 (141)
  • KB5625 (86)
  • KC250 (196)
  • KC5010 (606)
  • KC5025 (1026)
  • KC5125E (4)
  • KC5410 (233)
  • KC710 (333)
  • KC720 (475)
  • KC722 (306)
  • KC730 (726)
  • KC732 (86)
  • KC810 (350)
  • KC850 (339)
  • KC910 (130)
  • KC9105 (12)
  • KC9110 (229)
  • KC9120 (86)
  • KC9320 (229)
  • KC935 (229)
  • KC950 (243)
  • KCK20 (182)
  • KCK20B (229)
  • KCP10B (229)
  • KCP25B (229)
  • KCU10 (374)
  • KCU25 (378)
  • KD050 (45)
  • KD081 (86)
  • KD100 (115)
  • KD120 (141)
  • KD1425 (86)
  • KT175 (174)
  • KT315 (234)
  • KU10T (229)
  • KU25T (303)
  • KU30T (229)
  • KY3000 (141)
  • PN120 (2)
  • SP4066 (11)
  • THM (8)
  • TN10P (8)
  • TN6010 (11)
  • TN6025 (17)
  • TN7110 (11)
  • TTS (2)
  • WU10HT (2)
  • WU10PT (5)
  • WU25PT (2)
Hand Of Tool
  • L (159)
  • R (209)
Minimum Axial Groove Diameter
  • 0.0 (105)
  • 0.44 (2)
  • 0.4402 (1)
  • 0.453 (2)
  • 0.48 (1)
  • 0.5 (4)
  • 0.5118 (4)
  • 0.6 (1)
  • 0.6299 (2)
  • 0.65 (4)
  • 0.6693 (1)
  • 0.728 (2)
  • 0.73 (6)
  • 0.787 (1)
  • 0.7874 (4)
  • 0.8 (5)
  • 0.866 (2)
  • 0.8661 (2)
  • 0.9 (4)
  • 0.9449 (3)
  • 1.0 (6)
  • 1.0236 (1)
  • 1.024 (2)
  • 1.063 (2)
  • 1.125 (6)
  • 1.1417 (5)
  • 1.2 (4)
  • 1.25 (4)
  • 1.2598 (4)
  • 1.339 (4)
  • 1.375 (9)
  • 1.45 (3)
  • 1.5 (5)
  • 1.5354 (2)
  • 1.626 (38)
  • 1.7323 (2)
  • 1.75 (6)
  • 1.76 (1)
  • 1.7717 (1)
  • 1.782 (1)
  • 1.8504 (4)
  • 1.874 (38)
  • 1.9685 (3)
  • 2.0 (5)
  • 2.126 (6)
  • 2.2 (4)
  • 2.2047 (2)
  • 2.229 (37)
  • 2.25 (4)
  • 2.252 (23)
  • 2.2835 (2)
  • 2.375 (2)
  • 2.4 (5)
  • 2.5 (27)
  • 2.75 (8)
  • 2.7559 (3)
  • 3.0 (13)
  • 3.03 (1)
  • 3.25 (7)
  • 3.5 (78)
  • 3.937 (1)
  • 4.75 (1)
  • 5.0 (2)
  • 5.5 (38)
  • 5.75 (5)
  • 6.874 (38)
  • 8.252 (26)
  • 8.752 (23)
  • 13.11 (4)
to
Minimum Axial Groove Diameter
  • 0.0 (105)
  • 11.176 (1)
  • 11.18 (1)
  • 11.181 (1)
  • 11.5 (2)
  • 12.19 (1)
  • 12.7 (4)
  • 13.0 (4)
  • 15.24 (1)
  • 16.0 (2)
  • 16.51 (4)
  • 17.0 (1)
  • 18.5 (2)
  • 18.542 (6)
  • 20.0 (5)
  • 20.32 (5)
  • 22.0 (4)
  • 22.86 (4)
  • 24.0 (3)
  • 25.4 (6)
  • 26.0 (3)
  • 27.0 (2)
  • 28.575 (5)
  • 28.58 (1)
  • 29.0 (5)
  • 30.48 (4)
  • 31.75 (4)
  • 32.0 (4)
  • 34.0 (4)
  • 34.92 (2)
  • 34.925 (7)
  • 36.83 (3)
  • 38.1 (5)
  • 39.0 (2)
  • 41.3 (38)
  • 44.0 (2)
  • 44.45 (6)
  • 44.704 (1)
  • 45.0 (1)
  • 45.263 (1)
  • 47.0 (4)
  • 47.6 (38)
  • 50.0 (3)
  • 50.8 (5)
  • 54.0 (6)
  • 55.88 (4)
  • 56.0 (2)
  • 56.625 (37)
  • 57.15 (4)
  • 57.2 (23)
  • 58.0 (2)
  • 60.325 (2)
  • 60.96 (5)
  • 63.5 (27)
  • 69.85 (8)
  • 70.0 (3)
  • 76.2 (13)
  • 76.962 (1)
  • 82.55 (7)
  • 88.9 (78)
  • 100.0 (1)
  • 120.65 (1)
  • 127.0 (2)
  • 139.7 (38)
  • 146.05 (5)
  • 174.6 (38)
  • 209.6 (26)
  • 222.3 (23)
  • 333.0 (4)
to
Maximum Axial Groove Diameter
  • 9999.0 (250)
to
Maximum Axial Groove Diameter
  • 393.661 (250)
to
Countersunk Angle
  • 3.0 (3)
  • 7.0 (26)
  • 10.0 (5)
  • 14.5 (292)
  • 15.0 (34)
  • 27.0 (18)
  • 27.5 (151)
  • 30.0 (1356)
  • 33.0 (13)
  • 45.0 (38)
to
Cutting Direction
  • E (184)
  • S (184)
Rake Angle Style
  • DOUBLE NEGATIVE (120)
  • NEGATIVE-ZERO (25)
  • NEUTRAL (ZERO) (204)
  • POSITIVE-NEGATIVE (8)
Maximum Bore Depth
  • 25.0 (2)
  • 25.4 (14)
  • 31.26 (1)
  • 31.3 (1)
  • 31.75 (2)
  • 32.0 (3)
  • 32.8 (1)
  • 35.94 (1)
  • 38.1 (3)
  • 39.5 (1)
  • 39.878 (1)
  • 40.0 (3)
  • 47.5 (1)
  • 48.0 (2)
  • 50.8 (34)
  • 57.15 (2)
  • 60.0 (2)
  • 63.48 (1)
  • 63.5 (8)
  • 64.0 (4)
  • 76.2 (7)
  • 79.375 (2)
  • 80.0 (6)
  • 95.25 (6)
  • 96.0 (3)
  • 100.0 (8)
  • 101.6 (5)
  • 114.3 (4)
  • 120.0 (2)
  • 127.0 (11)
  • 128.0 (6)
  • 150.0 (1)
  • 152.4 (12)
  • 160.0 (10)
  • 177.8 (9)
  • 200.0 (8)
  • 203.2 (17)
  • 228.6 (3)
  • 254.0 (12)
to
Maximum Bore Depth
  • 0.9843 (2)
  • 1.0 (14)
  • 1.231 (1)
  • 1.235 (1)
  • 1.25 (2)
  • 1.2598 (3)
  • 1.29 (1)
  • 1.415 (1)
  • 1.5 (3)
  • 1.55 (1)
  • 1.57 (1)
  • 1.5748 (3)
  • 1.85 (1)
  • 1.88 (2)
  • 2.0 (34)
  • 2.25 (2)
  • 2.3622 (2)
  • 2.5 (9)
  • 2.5196 (2)
  • 2.52 (2)
  • 3.0 (7)
  • 3.125 (2)
  • 3.1496 (4)
  • 3.16 (2)
  • 3.75 (6)
  • 3.7758 (2)
  • 3.7794 (1)
  • 3.92 (2)
  • 3.936 (2)
  • 3.9372 (4)
  • 4.0 (5)
  • 4.5 (4)
  • 4.7244 (2)
  • 5.0 (11)
  • 5.0392 (6)
  • 5.9058 (1)
  • 6.0 (12)
  • 6.2992 (10)
  • 7.0 (9)
  • 7.874 (7)
  • 7.88 (1)
  • 8.0 (17)
  • 9.0 (3)
  • 10.0 (12)
to
Boring Bar Material
  • C (25)
  • H (11)
  • S (140)
Wiper Insert
  • N (2349)
frontEnd
Clamp Style
  • C (70)
  • M (39)
  • N (265)
  • S (23)
  • Y (21)
Insert Shape
  • LT-TRIANGLE LAY DOWN THREAD 60 (930)
  • TN-TOP NOTCH (1430)
Cutting Width
  • 0.5 (87)
  • 0.787 (95)
  • 0.8 (87)
  • 0.889 (87)
  • 0.991 (87)
  • 1.0 (173)
  • 1.041 (87)
  • 1.19 (128)
  • 1.194 (181)
  • 1.199 (47)
  • 1.2 (173)
  • 1.39 (87)
  • 1.397 (87)
  • 1.4 (87)
  • 1.473 (87)
  • 1.5 (173)
  • 1.56 (47)
  • 1.57 (126)
  • 1.575 (181)
  • 1.69 (87)
  • 1.7 (87)
  • 1.702 (87)
  • 1.75 (173)
  • 1.829 (86)
  • 1.94 (87)
  • 1.95 (87)
  • 1.956 (87)
  • 1.981 (86)
  • 2.0 (173)
  • 2.007 (87)
  • 2.2 (173)
  • 2.235 (173)
  • 2.24 (132)
  • 2.25 (128)
  • 2.388 (181)
  • 2.39 (41)
  • 2.464 (86)
  • 2.5 (173)
  • 2.667 (86)
  • 2.74 (87)
  • 2.743 (173)
  • 2.75 (173)
  • 2.794 (86)
  • 2.997 (173)
  • 3.0 (228)
  • 3.099 (86)
  • 3.17 (86)
  • 3.175 (228)
  • 3.18 (66)
  • 3.2 (228)
  • 3.245 (87)
  • 3.25 (86)
  • 3.251 (173)
  • 3.27 (87)
  • 3.32 (45)
  • 3.329 (45)
  • 3.5 (228)
  • 3.607 (86)
  • 3.73 (47)
  • 3.81 (87)
  • 3.84 (87)
  • 3.96 (86)
  • 3.962 (86)
  • 3.974 (45)
  • 3.988 (86)
  • 4.0 (141)
  • 4.24 (41)
  • 4.242 (141)
  • 4.25 (45)
  • 4.3 (86)
  • 4.5 (141)
  • 4.521 (86)
  • 4.699 (115)
  • 4.775 (141)
  • 4.78 (29)
  • 4.785 (29)
  • 4.788 (26)