successfully added to cart
View Cart

Notifications

Mark all as read

Torneado de D.I. y D.E.

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (7292)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (7267)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (7267)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (7267)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (7267)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (7267)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (7292)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (7292)
  • M Stainless Steel (5924)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (5924)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (5924)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (5924)
  • K Cast Iron (5735)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (5704)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (5672)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (5364)
  • N Non-Ferrous Materials (3405)
    • N1
      Wrought Aluminum
      (3098)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (3195)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1966)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (3386)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (3240)
    • N6
      Carbon, Graphite Composites, CFRP
      (2767)
    • N7
      MMC's
      (3126)
  • S High-Temp Alloys (6009)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (5796)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (5991)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (5809)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (5107)
  • H Hardened Materials (3389)
    • H1
      Hardened Materials 44-48 HRC
      (3389)
    • H2
      Hardened Materials 48-55 HRC
      (3362)
    • H3
      Hardened Materials 56-60 HRC
      (3362)
    • H4
      Hardened Materials >60 HRC
      (2493)
Select First Choice
  • BR (151)
  • CN (895)
  • DE (939)
  • GB (609)
  • IN (438)
  • SG (410)
  • US (1003)
Applications
Applications
  • Back Boring Back Boring (87)
  • Boring Boring (1)
  • CRT Profiling CRT Profiling (55)
  • Chamfer Turning Chamfer Turning (175)
  • Facing Facing (1528)
  • Grooving Grooving (2)
  • ID Facing ID Facing (200)
  • ID Grooving ID Grooving (11)
  • ID Thread Turning ID Thread Turning (209)
  • Multiple Direction Cutting Multiple Direction Cutting (2423)
  • OD Thread Turning OD Thread Turning (2)
  • Plunge Turning Plunge Turning (55)
  • Profiling Profiling (2051)
  • TRN Boring TRN Boring (1372)
  • Threading Threading (1)
  • Turning Turning (2020)
Type of Thread
Type of Thread
  • 55 (6)
  • 60 (17)
  • ACME (17)
  • API (13)
  • API BUTTRESS (2)
  • API RD (13)
  • BSPT (4)
  • BSW (14)
  • BUTTRESS (10)
  • M (14)
  • NPT (12)
  • NPTF (4)
  • RD DIN 405 (6)
  • STUB ACME (14)
  • TR DIN 103 (6)
  • UN (14)
  • UNJ (12)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (4392)
  • Interrupted (1590)
  • Lightly Interrupted Cut (5405)
  • Smooth Cut (7399)
  • Stable (4)
  • Unstable (4)
  • Varying Depth of Cut (5447)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (220)
  • 48.0 (8)
  • 49.783 (2)
  • 50.0 (24)
  • 60.0 (30)
  • 62.5 (40)
  • 63.0 (19)
  • 72.5 (25)
  • 75.0 (362)
  • 85.0 (14)
  • 90.0 (610)
  • 90.25 (10)
  • 91.0 (7)
  • 92.0 (4)
  • 93.0 (797)
  • 95.0 (1052)
  • 97.0 (8)
  • 97.5 (1)
  • 105.0 (1)
  • 107.5 (140)
  • 117.5 (14)
  • 140.0 (4)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Bolt-On Head (206)
  • Boring Bar Shank (850)
  • KM (496)
  • PSC (8)
  • Toolholder (1381)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (5)
  • 1.0 (2380)
  • 2.0 (3495)
  • 3.0 (1256)
  • 4.0 (3626)
  • 6.0 (1096)
  • 8.0 (2163)
  • 16.0 (2)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 in (83)
  • 0.001 in (156)
  • 0.002 in (559)
  • 0.003 in (14)
  • 0.004 in (1979)
  • 0.005 in (9)
  • 0.006 in (14)
  • 0.007 in (146)
  • 0.008 in (2286)
  • 0.01 in (10)
  • 0.011 in (8)
  • 0.012 in (63)
  • 0.014 in (172)
  • 0.015 in (126)
  • 0.016 in (4098)
  • 0.017 in (10)
  • 0.019 in (10)
  • 0.02 in (79)
  • 0.021 in (1)
  • 0.023 in (10)
  • 0.024 in (122)
  • 0.027 in (1)
  • 0.028 in (28)
  • 0.031 in (5240)
  • 0.033 in (1)
  • 0.035 in (10)
  • 0.037 in (2)
  • 0.039 in (28)
  • 0.047 in (3564)
  • 0.049 in (8)
  • 0.06 in (8)
  • 0.062 in (368)
  • 0.063 in (2250)
  • 0.069 in (8)
  • 0.078 in (15)
  • 0.079 in (20)
  • 0.089 in (10)
  • 0.094 in (343)
  • 0.095 in (890)
  • 0.098 in (2)
  • 0.119 in (22)
  • 0.125 in (154)
  • 0.126 in (340)
  • 0.157 in (101)
  • 0.187 in (13)
  • 0.188 in (103)
  • 0.189 in (3)
  • 0.197 in (97)
  • 0.237 in (110)
  • 0.25 in (208)
  • 0.313 in (24)
  • 0.315 in (18)
  • 0.375 in (43)
  • 0.394 in (17)
  • 0.492 in (10)
  • 0.5 in (27)
  • 0.63 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (83)
  • 0.025 mm (156)
  • 0.05 mm (559)
  • 0.076 mm (14)
  • 0.1 mm (1979)
  • 0.125 mm (9)
  • 0.151 mm (14)
  • 0.176 mm (146)
  • 0.2 mm (2286)
  • 0.225 mm (8)
  • 0.25 mm (10)
  • 0.275 mm (8)
  • 0.301 mm (63)
  • 0.325 mm (10)
  • 0.351 mm (172)
  • 0.375 mm (126)
  • 0.4 mm (4098)
  • 0.426 mm (10)
  • 0.45 mm (10)
  • 0.476 mm (3)
  • 0.5 mm (79)
  • 0.525 mm (1)
  • 0.576 mm (10)
  • 0.601 mm (122)
  • 0.65 mm (1)
  • 0.701 mm (28)
  • 0.775 mm (30)
  • 0.8 mm (5210)
  • 0.826 mm (1)
  • 0.9 mm (10)
  • 0.925 mm (2)
  • 1.0 mm (28)
  • 1.201 mm (3564)
  • 1.25 mm (8)
  • 1.5 mm (8)
  • 1.576 mm (368)
  • 1.6 mm (2250)
  • 1.75 mm (8)
  • 1.975 mm (15)
  • 2.0 mm (20)
  • 2.25 mm (10)
  • 2.375 mm (343)
  • 2.401 mm (890)
  • 2.5 mm (2)
  • 3.0 mm (22)
  • 3.176 mm (154)
  • 3.2 mm (340)
  • 4.0 mm (101)
  • 4.75 mm (13)
  • 4.775 mm (103)
  • 4.801 mm (3)
  • 5.0 mm (97)
  • 6.0 mm (110)
  • 6.351 mm (208)
  • 7.95 mm (24)
  • 8.0 mm (18)
  • 9.525 mm (43)
  • 10.0 mm (17)
  • 12.5 mm (10)
  • 12.701 mm (27)
  • 16.0 mm (2)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (6160)
  • 0.65 mm (1)
  • 0.701 mm (1)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (6160)
  • 0.027 in (1)
  • 0.028 in (1)
Corner Chamfer Min to Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (1248)
  • Interrupted (8)
  • Lightly Interrupted Cut (2122)
  • Smooth Cut (4085)
  • Varying Depth of Cut (2181)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (1488)
  • CM2 (1427)
  • K090 (1807)
  • K10M (2042)
  • K10P (1823)
  • K10U (1789)
  • K15U (1755)
  • K20K (2013)
  • K25M (1770)
  • K25P (1739)
  • K313 (3081)
  • K420 (1587)
  • K68 (2761)
  • KB1610 (1662)
  • KB5610 (1398)
  • KB5625 (1485)
  • KB9610 (1857)
  • KBH10 (1684)
  • KBH20 (1818)
  • KC5010 (3587)
  • KC5025 (3041)
  • KC5410 (2555)
  • KC5510 (1787)
  • KC720 (2314)
  • KC730 (3100)
  • KC7310 (2029)
  • KC732 (2261)
  • KC8050 (2962)
  • KC810 (2842)
  • KC850 (3200)
  • KC9010 (2435)
  • KC9025 (2924)
  • KC910 (2780)
  • KC9105 (2504)
  • KC9110 (2964)
  • KC9120 (2558)
  • KC9125 (2851)
  • KC9140 (1911)
  • KC9145 (1609)
  • KC9215 (1809)
  • KC9225 (2697)
  • KC9240 (2758)
  • KC9240NEW (2740)
  • KC9245 (1804)
  • KC9315 (2907)
  • KC9320 (2657)
  • KC9325 (2418)
  • KC935 (3006)
  • KC950 (2594)
  • KC990 (2704)
  • KCK05 (2756)
  • KCK05B (2112)
  • KCK15 (2607)
  • KCK15B (2767)
  • KCK20 (2894)
  • KCK20B (2826)
  • KCM15 (2724)
  • KCM15B (2382)
  • KCM25 (2887)
  • KCM25B (2721)
  • KCM35 (2298)
  • KCM35B (1545)
  • KCP05 (2496)
  • KCP05B (1493)
  • KCP10 (3098)
  • KCP10B (3126)
  • KCP25 (3277)
  • KCP25B (3314)
  • KCP25C (2222)
  • KCP30 (2809)
  • KCP30B (1762)
  • KCP40 (1669)
  • KCP40B (1783)
  • KCPK05 (1805)
  • KCS10 (1427)
  • KCS10B (2602)
  • KCU10 (3474)
  • KCU25 (3036)
  • KD050 (1529)
  • KD081 (1410)
  • KD1400 (1778)
  • KD1425 (1881)
  • KT125 (1533)
  • KT175 (2037)
  • KT315 (2622)
  • KU10T (2268)
  • KU30T (2638)
  • KY1320 (1668)
  • KY1615 (1853)
  • KY3000 (1699)
  • KY3400 (1488)
  • KY3500 (1923)
  • KY4400 (1787)
  • KYHK15B (1948)
  • KYK25 (1433)
  • KYK35 (1787)
  • NL250 (1753)
  • NL920 (1556)
  • SP3019 (1455)
  • SP4019 (1418)
Hand Of Tool
Hand Of Tool
  • L (1161)
  • N (209)
  • R (1572)
Wiper Insert
Wiper Insert
  • N (9031)
  • Y (2070)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 4.575 mm (8)
  • 5.176 mm (8)
  • 5.275 mm (5)
  • 5.551 mm (3)
  • 5.7 mm (4)
  • 5.775 mm (3)
  • 5.801 mm (5)
  • 5.851 mm (1)
  • 5.95 mm (9)
  • 6.0 mm (1)
  • 6.176 mm (1)
  • 6.2 mm (1)
  • 6.601 mm (2)
  • 6.775 mm (3)
  • 6.9 mm (1)
  • 6.976 mm (3)
  • 7.051 mm (1)
  • 7.075 mm (1)
  • 7.101 mm (8)
  • 7.25 mm (14)
  • 7.426 mm (4)
  • 7.5 mm (1)
  • 7.525 mm (5)
  • 7.601 mm (1)
  • 7.625 mm (2)
  • 8.15 mm (3)
  • 8.8 mm (4)
  • 9.05 mm (6)
  • 9.1 mm (5)
  • 9.15 mm (3)
  • 9.201 mm (1)
  • 10.5 mm (1)
  • 10.55 mm (12)
  • 10.951 mm (1)
  • 11.0 mm (14)
  • 11.125 mm (1)
  • 12.201 mm (30)
  • 12.451 mm (1)
  • 12.9 mm (2)
  • 13.0 mm (31)
  • 15.25 mm (43)
  • 16.0 mm (48)
  • 18.55 mm (10)
  • 19.55 mm (43)
  • 20.0 mm (58)
  • 21.6 mm (10)
  • 23.625 mm (41)
  • 24.901 mm (16)
  • 25.0 mm (70)
  • 25.401 mm (2)
  • 27.0 mm (2)
  • 30.225 mm (3)
  • 30.475 mm (43)
  • 31.0 mm (10)
  • 32.0 mm (131)
  • 32.676 mm (2)
  • 33.0 mm (2)
  • 33.025 mm (22)
  • 37.0 mm (3)
  • 37.35 mm (22)
  • 37.4 mm (3)
  • 39.375 mm (3)
  • 40.0 mm (139)
  • 41.276 mm (2)
  • 43.301 mm (26)
  • 44.0 mm (12)
  • 44.7 mm (37)
  • 45.0 mm (2)
  • 47.625 mm (2)
  • 50.0 mm (167)
  • 50.801 mm (32)
  • 51.051 mm (13)
  • 52.0 mm (2)
  • 53.975 mm (3)
  • 54.0 mm (30)
  • 55.0 mm (6)
  • 57.151 mm (6)
  • 59.0 mm (2)
  • 60.0 mm (16)
  • 60.95 mm (34)
  • 63.0 mm (80)
  • 63.5 mm (14)
  • 65.825 mm (4)
  • 67.3 mm (2)
  • 70.0 mm (53)
  • 74.0 mm (4)
  • 76.95 mm (26)
  • 80.0 mm (51)
  • 82.551 mm (10)
  • 86.0 mm (68)
  • 90.0 mm (6)
  • 94.0 mm (2)
  • 100.0 mm (41)
  • 104.0 mm (2)
  • 106.0 mm (32)
  • 118.0 mm (2)
  • 120.0 mm (2)
  • 130.0 mm (2)
  • 850.0 mm (6)
  • 2000.0 mm (6)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.18 in (8)
  • 0.205 in (8)
  • 0.209 in (5)
  • 0.219 in (3)
  • 0.224 in (4)
  • 0.227 in (3)
  • 0.228 in (5)
  • 0.23 in (1)
  • 0.234 in (9)
  • 0.237 in (1)
  • 0.243 in (1)
  • 0.244 in (1)
  • 0.26 in (2)
  • 0.267 in (3)
  • 0.272 in (1)
  • 0.275 in (3)
  • 0.278 in (1)
  • 0.279 in (1)
  • 0.28 in (8)
  • 0.286 in (14)
  • 0.292 in (4)
  • 0.295 in (1)
  • 0.296 in (5)
  • 0.299 in (1)
  • 0.3 in (2)
  • 0.321 in (3)
  • 0.347 in (4)
  • 0.356 in (6)
  • 0.358 in (5)
  • 0.36 in (3)
  • 0.362 in (1)
  • 0.414 in (1)
  • 0.416 in (12)
  • 0.431 in (1)
  • 0.433 in (14)
  • 0.438 in (1)
  • 0.48 in (30)
  • 0.49 in (1)
  • 0.508 in (2)
  • 0.512 in (31)
  • 0.6 in (43)
  • 0.63 in (48)
  • 0.73 in (10)
  • 0.77 in (43)
  • 0.787 in (58)
  • 0.85 in (10)
  • 0.93 in (41)
  • 0.98 in (16)
  • 0.984 in (70)
  • 1.0 in (2)
  • 1.063 in (2)
  • 1.19 in (3)
  • 1.2 in (43)
  • 1.22 in (10)
  • 1.26 in (131)
  • 1.286 in (2)
  • 1.299 in (2)
  • 1.3 in (22)
  • 1.457 in (3)
  • 1.47 in (22)
  • 1.472 in (3)
  • 1.55 in (3)
  • 1.575 in (139)
  • 1.625 in (2)
  • 1.705 in (26)
  • 1.732 in (12)
  • 1.76 in (37)
  • 1.772 in (2)
  • 1.875 in (2)
  • 1.969 in (167)
  • 2.0 in (32)
  • 2.011 in (13)
  • 2.047 in (2)
  • 2.125 in (3)
  • 2.126 in (30)
  • 2.165 in (6)
  • 2.25 in (6)
  • 2.323 in (2)
  • 2.362 in (16)
  • 2.4 in (34)
  • 2.48 in (80)
  • 2.5 in (14)
  • 2.592 in (4)
  • 2.65 in (2)
  • 2.757 in (53)
  • 2.914 in (4)
  • 3.031 in (26)
  • 3.15 in (51)
  • 3.25 in (10)
  • 3.386 in (68)
  • 3.543 in (6)
  • 3.701 in (2)
  • 3.938 in (41)
  • 4.094 in (2)
  • 4.173 in (32)
  • 4.646 in (2)
  • 4.724 in (2)
  • 5.118 in (2)
  • 33.465 in (6)
  • 78.74 in (6)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (10)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (10)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (917)
  • E (838)
  • P (19)
  • S (1159)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (1507)
  • DOUBLE POSITIVE (42)
  • NEGATIVE-ZERO (540)
  • NEUTRAL (ZERO) (520)
  • POSITIVE-NEGATIVE (45)
  • POSITIVE-ZERO (219)
Maximum Bore Depth
Maximum Bore Depth
  • 0.484 in (1)
  • 0.5 in (7)
  • 0.63 in (2)
  • 0.75 in (7)
  • 0.787 in (2)
  • 0.875 in (3)
  • 0.935 in (3)
  • 0.946 in (6)
  • 0.982 in (1)
  • 0.984 in (1)
  • 1.0 in (16)
  • 1.124 in (3)
  • 1.125 in (6)
  • 1.181 in (5)
  • 1.25 in (10)
  • 1.26 in (14)
  • 1.379 in (22)
  • 1.385 in (3)
  • 1.417 in (9)
  • 1.498 in (3)
  • 1.499 in (13)
  • 1.5 in (17)
  • 1.508 in (3)
  • 1.563 in (2)
  • 1.575 in (82)
  • 1.661 in (6)
  • 1.701 in (2)
  • 1.772 in (16)
  • 1.873 in (5)
  • 1.875 in (16)
  • 1.891 in (32)
  • 1.907 in (2)
  • 1.938 in (2)
  • 1.969 in (95)
  • 1.986 in (2)
  • 2.0 in (29)
  • 2.169 in (11)
  • 2.205 in (2)
  • 2.209 in (6)
  • 2.249 in (2)
  • 2.25 in (12)
  • 2.283 in (4)
  • 2.362 in (124)
  • 2.382 in (4)
  • 2.444 in (3)
  • 2.499 in (11)
  • 2.5 in (30)
  • 2.52 in (31)
  • 2.757 in (49)
  • 2.775 in (4)
  • 2.835 in (8)
  • 2.953 in (2)
  • 2.955 in (11)
  • 2.993 in (6)
  • 3.0 in (48)
  • 3.037 in (4)
  • 3.044 in (8)