Sending to SolidCAM in progress...

Downloaded file will be available after import in the SolidCAM tool library.

Brocas TF • Altas tasas de evacuación del metal • Sin refrigerante
Brocas TF • Altas tasas de evacuación del metal • Sin refrigerante
Brocas TF • Altas tasas de evacuación del metal • Sin refrigerante
Brocas TF • Altas tasas de evacuación del metal • Sin refrigerante
Brocas TF • Altas tasas de evacuación del metal • Sin refrigerante
Brocas TF • Altas tasas de evacuación del metal • Sin refrigerante
Select the files you wish to request
Downloads SDS
Request {{cadTool}} format
{{cadTool}} format is not available

K105 (~5 x D) • K10 • Mango A • Brocas TF

Brocas TF • Altas tasas de evacuación del metal • Sin refrigerante

Metric
Inch
Número de material SAP 1790948
Número de catálogo ISO K105A05745
Número de catálogo ANSI K105A05745
Calidad K10
Diámetro de broca M [D1] 14.592 mm
Diámetro de broca M [D1] .5745 in
Longitud total [L] 133 mm
Longitud total [L] 5.236 in
Longitud del canal [L3] 82 mm
Longitud del canal [L3] 3.228 in
Profundidad máxima de taladrado [L4] 64.5 mm
Profundidad máxima de taladrado [L4] 2.539 in
Longitud de punta de broca [L5] 3.649 mm
Longitud de punta de broca [L5] .1437 in
Longitud de mango [LS] 48.499 mm
Longitud de mango [LS] 1.909 in
Adaptador/Mango/Diá int [D] 15.875 mm
Adaptador/Mango/Diá int [D] .625 in
Ver todas las variantes de productos

Uses and application

  • TaladradoTaladrado
  • Taladrado: Salida inclinadaTaladrado: Salida inclinada
  • Refrigerante para caudal: TaladradoRefrigerante para caudal: Taladrado
  • Mango —  Liso cilíndrico ≤h6Mango — Liso cilíndrico ≤h6
  • Ángulo de la hélice: 30°Ángulo de la hélice: 30°
  • Profundidad de taladrado: 5xProfundidad de taladrado: 5x
  • Drilling: Cross-Hole DrillingDrilling: Cross-Hole Drilling

Materiales de la pieza de trabajo

K Fundición
N Materiales no ferrosos
S Aleaciones de alta temperatura

Features and benefits



  • TF drills without through coolant for high metal removal rates and excellent hole quality in short chipping materials such as gray cast iron, ductile iron, and aluminum, as well as in short-hole titanium applications.

  • Material-specific SC drill with three cutting edges for higher feed rates than with two-edged drills.

  • Three spacious flutes for rapid chip evacuation.

  • Three-margin lands deliver better hole quality and straightness than two-flute drills.

  • TiAlN-coated KC7210™ grade for higher wear resistance at elevated speeds.

  • Uncoated K10™ grade helps to prevent built-up edge in drilling aluminum and high-temp alloys.

Lado de máquina

loading...

Lado de la pieza de trabajo

loading...
Está a punto de añadir a su página Mis soluciones. ¿Desea continuar?
product-image
Please adjust the following properties from

ISO catálogo

ANSI catálogo

to find similar products.

The following files are available

Please select a file to download

Models

Product data

Debe iniciar sesión para ver la información de su panel de control
Session expired due to inactivity, please login again
El/los producto/s () que estaba intentando añadir al carrito no está/están disponibles Contacto del servicio de atención al cliente.
artículo(s) añadido(s) correctamente al carrito
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO catálogo Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?