Country

Idioma

Unidad de medida

Comuníquese con nuestro equipo de ventas para crearle una oferta personalizada

Lista de precios:

Descuento: %

Lista de precios:

$128.80 /each

Your price::

Qty

Configure

SDS

KenTIP™ HP

Name: KenTIP™ HP
SKU: 5065401
Rating: 0 (0 reviews)

Plaquitas de metal duro KenTIP™

Metric

Inch

Número de material SAP	5065401
Número de catálogo ISO	KTIP1538HPM
Número de catálogo ANSI	KTIP1538HPM
Calidad	KCP15
Diámetro de broca [D1]	15.38 mm
Diámetro de broca [D1]	.6055 in
Tamaño de asiento de la plaquita [SSC]	T

Ver todas las variantes de productos

Uses and application

Taladrado
Taladrado: Salida inclinada
Dimensiones de la herramienta: 2 canales/2 márgenes/refrigerante

Materiales de la pieza de trabajo

P Acero

K Fundición

Features and benefits

KenTIP KCP15™ HP cutting edges enable high metal removal rates and superior tool life for steel applications.

KenTIP HP geometry works with low cutting and feed forces and provides very good centring. Reinforced cutting edges and good chip forming improve tool life due to high wear and edge chipping resistance.

KCP15 is a fine grain carbide with a TiAlN-based PVD nanolayer coating with greatly improved layer bonding for higher tool life. Its increased Al content provides better thermal and chemical stability, which makes it more suitable for higher cutting speeds.

KenTIP KCP15 HP cutting edges are perfectly suited to drill alloyed and high alloy steels.

Use KenTIP KCP15 HP cutting edges as an alternative in cast iron materials.

Lado de máquina

Lado de la pieza de trabajo

tolerance
D1 inch	tolerance k8
.2362	.000/+.0007
.2362–.3937	.000/+.0009
.3937–.7087	.000/+.0011
.7087–1.0236	.000/+.0013

tolerance
D1 metric	tolerance k8
6	0,000/+0,018
6–10	0,000/+0,022
10–18	0,000/+0,027
18–26	0,000/+0,033

D1 mm	D1 max	seat	L5	LS	round D	3 x D L	L3	L4 max	5 x D L	L3	L4 max	8 x D L	L3	L4 max	12 x D L	L3	L4 max	wrench
.3125	.3346	F	.055	1.59	.3750	3.13	1.29	1.00	3.88	2.05	1.67	4.88	3.17	2.67	6.25	4.54	4.02	170.306
.3346	.3543	G	.059	1.59	.3750	3.25	1.38	1.06	4.00	2.16	1.77	5.13	3.42	2.83	6.50	4.79	4.25	170.306
.3543	.3740	H	.063	1.59	.3750	3.38	1.46	1.12	4.13	2.28	1.87	5.25	3.54	2.99	6.75	5.04	4.49	170.306
.3740	.3937	I	.063	1.59	.3750	3.38	1.54	1.18	4.25	2.44	1.97	5.38	3.67	3.15	7.13	5.34	4.72	170.306
.3740	.3937	I	.063	1.67	.4375	3.38	1.54	1.18	4.38	2.44	1.97	5.38	3.59	3.15	7.00	5.29	4.72	170.306
.3937	.4133	J	.067	1.67	.4375	3.63	1.63	1.24	4.63	2.55	2.07	5.75	3.96	3.30	7.37	5.59	4.96	170.307
.4134	.4330	K	.071	1.67	.4375	3.75	1.71	1.30	4.75	2.67	2.16	6.00	4.21	3.46	7.63	5.84	5.20	170.307
.4331	.4527	L	.075	1.67	.4375	3.88	1.79	1.36	4.88	2.78	2.26	6.25	4.46	3.62	7.87	6.09	5.43	170.307
.4528	.4724	M	.079	1.79	.5000	3.88	1.87	1.42	5.00	2.90	2.36	6.50	4.59	3.78	8.25	6.34	5.67	170.307
.4724	.4921	N	.083	1.79	.5000	4.00	1.95	1.48	5.00	3.01	2.46	6.75	4.84	3.94	8.50	6.59	5.91	170.308
.4921	.5118	O	.087	1.79	.5000	4.13	2.04	1.54	5.13	3.13	2.56	7.00	5.09	4.09	8.75	6.84	6.14	170.308
.4921	.5118	O	.087	1.79	.5625	4.13	2.04	1.54	5.13	3.13	2.56	7.00	5.09	4.09	8.75	6.84	6.14	170.308
.5118	.5315	P	.087	1.79	.5625	4.25	2.11	1.60	5.25	3.24	2.66	7.13	5.22	4.25	9.00	7.09	6.38	170.308
.5315	.5511	Q	.091	1.79	.5625	4.25	2.19	1.65	5.50	3.39	2.75	7.25	5.34	4.41	9.25	7.34	6.61	170.308
.5512	.5708	R	.095	1.79	.5625	4.50	2.27	1.71	5.75	3.50	2.85	7.38	5.47	4.57	9.50	7.59	6.85	170.309
.5709	.5905	S	.098	1.91	.6250	4.50	2.34	1.77	5.75	3.61	2.95	7.50	5.47	4.72	9.87	7.85	7.09	170.309
.5906	.6299	T	.102	1.91	.6250	4.75	2.43	1.89	6.00	3.76	3.15	7.75	5.72	5.04	1.37	8.35	7.56	170.309
.6299	.6693	U	.110	1.91	.6875	4.88	2.59	2.01	6.25	4.06	3.34	8.00	5.97	5.35	11.00	8.97	8.03	170.309
.6693	.7086	V	.116	1.91	.6875	5.00	2.99	2.24	6.50	4.47	3.66	8.75	6.72	5.79	11.50	9.47	8.50	170.314
.7087	.7480	W	.122	2.00	.7500	5.25	3.13	2.25	6.88	4.76	3.86	9.25	7.13	6.11	12.13	1.01	8.98	170.314
.7480	.7874	X	.129	2.00	.7500	5.50	3.38	2.49	7.13	5.01	4.07	9.63	7.51	6.43	12.63	1.51	9.45	170.314
.7874	.8267	Y	.136	2.00	.8125	5.75	3.63	2.62	7.50	5.38	4.27	1.00	7.88	6.75	13.13	11.01	9.92	170.314
.8268	.8661	Z	.142	2.07	.8750	5.88	3.69	2.60	7.63	5.44	4.33	1.25	8.06	6.93	13.75	11.56	1.39	170.314
.8661	.9055	ZA	.150	2.07	.8750	6.00	3.81	2.72	7.88	5.69	4.53	1.63	8.44	7.24	14.25	12.06	1.87	170.314
.9055	.9448	ZB	.158	2.15	.9375	6.25	3.98	2.83	8.25	5.98	4.72	11.13	8.86	7.56	14.87	12.61	11.34	170.314
.9449	.9842	ZC	.161	3.00	1.0000	7.25	4.13	2.95	9.38	6.26	4.92	12.25	9.13	7.87	16.25	13.13	11.81	170.314
.9843	1.0236	ZD	.169	3.00	1.0000	7.38	4.26	3.07	9.63	6.51	5.12	12.63	9.51	8.19	16.75	13.63	12.28	170.314
1.0236	1.0630	ZE	.176	3.25	1.2500	7.86	4.49	3.19	9.99	6.62	5.32	13.25	9.88	8.50	17.50	14.13	12.76	170.314
1.0630	1.1023	ZE	.185	3.25	1.2500	7.98	4.61	3.31	1.18	6.81	5.51	13.57	1.20	8.82	18.00	14.63	13.23	170.314

D1 mm	D1 max	seat	L5	LS	round D	1.5 x D L	L3	L4 max	3 x D L	L3	L4 max	5 x D L	L3	L4 max	8 x D L	L3	L4 max	12 x D L	L3	L4 max	wrench
8,000	8,499	F	1,4	41	10	67	23	13	79	35	26	97	53	43	123	79	68	157	113	102	170.306
8,500	8,999	G	1,5	41	10	68	24	14	81	37	27	100	56	45	127	83	72	163	119	108	170.306
9,000	9,499	H	1,6	41	10	69	25	14	83	39	29	103	58	48	132	88	76	170	126	114	170.306
9,500	9,999	I	1,6	41	10	70	26	15	85	41	30	107	63	50	137	92	80	177	133	120	170.306
10,000	10,499	J	1,7	46	12	77	28	16	92	43	32	115	66	53	147	98	84	189	140	126	170.307
10,500	10,999	K	1,8	46	12	78	29	17	94	45	33	118	68	55	151	101	88	195	146	132	170.307
11,000	11,499	L	1,9	46	12	79	30	17	96	47	35	121	71	58	156	105	92	202	153	138	170.307
11,500	11,999	M	2,0	46	12	80	31	18	98	49	36	124	75	60	160	110	96	208	159	144	170.307
12,000	12,499	N	2,1	46	14	83	34	19	101	52	38	127	78	63	165	116	100	215	166	150	170.308
12,500	12,999	O	2,2	46	14	84	35	20	103	54	39	130	81	65	169	120	104	221	172	156	170.308
13,000	13,499	P	2,2	46	14	85	36	20	105	56	41	133	84	68	174	125	108	228	179	162	170.308
13,500	13,999	Q	2,3	46	14	86	37	21	107	58	42	137	88	70	179	130	112	235	186	168	170.308
14,000	14,499	R	2,4	49	16	91	39	22	112	60	44	143	91	73	187	135	116	245	193	174	170.309
14,500	14,999	S	2,5	49	16	92	40	23	114	62	45	146	94	75	191	139	120	251	199	180	170.309
15,000	15,999	T	2,6	49	16	94	42	24	118	66	48	152	100	80	200	148	128	264	212	192	170.309
16,000	16,999	U	2,8	49	18	97	45	26	122	70	51	158	106	85	209	157	136	277	225	204	170.309
17,000	17,999	V	2,9	49	18	100	48	27	127	75	54	165	113	90	219	167	144	291	239	216	170.314
18,000	18,999	W	3,1	51	20	105	51	29	133	79	57	173	119	95	230	176	152	306	252	228	170.314
19,000	19,999	X	3,3	51	20	107	53	30	137	83	60	179	125	100	239	185	160	319	265	240	170.314
20,000	20,999	Y	3,5	57	25	116	56	32	147	87	63	191	131	105	254	200	168	344	284	252	170.314
21,000	21,999	Z	3,6	57	25	118	58	33	151	91	66	198	138	110	264	204	176	352	292	264	170.314
22,000	22,999	ZA	3,8	57	25	122	62	35	156	96	69	204	144	115	273	213	184	365	305	276	170.314
23,000	23,999	ZB	4,0	57	25	124	64	36	160	100	72	210	150	120	282	222	192	378	318	288	170.314
24,000	24,999	ZC	4,1	57	25	127	67	38	164	104	75	216	156	125	291	231	200	391	331	300	170.314
25,000	25,999	ZD	4,3	61	32	133	69	39	172	108	78	227	163	130	305	241	208	409	345	312	170.314
26,000	26,999	ZE	4,5	61	32	138	74	41	178	114	81	232	168	135	315	251	216	423	359	324	170.314
27,000	27,999	ZE	4,7	61	32	139	75	42	181	117	84	239	175	140	323	259	224	435	371	336	170.314

D1 mm	D1 max	seat	L5	LS	flanged D	1.5 x D L	L3	L4 max	3 x D L	L3	L4 max	5 x D L	L3	L4 max	8 x D L	L3	L4 max	wrench
8,000	8,490	F	1,4	45	12	73	23	13	86	35	26	104	53	43	129	79	68	170.306
8,500	8,990	G	1,5	45	12	74	24	14	88	37	27	107	56	45	134	83	72	170.306
9,000	9,490	H	1,6	45	12	76	25	14	90	39	29	110	59	48	138	88	76	170.306
9,500	9,990	I	1,6	45	12	77	26	15	92	41	30	114	63	50	144	93	80	170.306
10,000	10,490	J	1,7	48	16	81	28	16	97	43	32	120	66	53	151	97	84	170.307
10,500	10,990	K	1,8	48	16	82	29	17	99	45	33	123	69	55	156	102	88	170.307
11,000	11,490	L	1,9	48	16	84	30	17	101	47	35	126	72	58	160	107	92	170.307
11,500	11,990	M	2,0	48	16	85	31	18	103	49	36	129	75	60	165	111	96	170.307
12,000	12,490	N	2,1	48	16	87	34	19	106	52	38	132	78	63	169	116	100	170.308
12,500	12,990	O	2,2	48	16	88	35	20	108	54	39	135	81	65	174	120	104	170.308
13,000	13,490	P	2,2	48	16	90	36	20	110	56	41	138	84	68	178	124	108	170.308
13,500	13,990	Q	2,3	48	16	91	37	21	112	58	42	142	88	70	184	130	112	170.308
14,000	14,490	R	2,4	48	16	92	39	22	114	60	44	145	91	73	188	134	116	170.309
14,500	14,990	S	2,5	48	16	93	40	23	116	62	45	148	94	75	193	139	120	170.309
15,000	15,990	T	2,6	50	20	98	42	24	122	66	48	156	100	80	204	148	128	170.309
16,000	16,990	U	2,8	50	20	100	45	26	126	70	51	162	106	85	213	157	136	170.309
17,000	17,990	V	2,9	50	20	104	48	27	131	75	54	169	113	90	223	167	144	170.314
18,000	18,990	W	3,1	56	25	112	51	29	141	79	57	181	119	95	238	176	152	170.314
19,000	19,990	X	3,3	56	25	115	53	30	144	83	60	187	125	100	247	185	160	170.314
20,000	20,990	Y	3,5	56	25	117	56	32	149	87	63	193	131	105	256	194	168	170.314
21,000	21,990	Z	3,6	56	25	120	58	33	153	91	66	200	138	110	266	204	176	170.314
22,000	22,990	ZA	3,8	56	25	123	62	35	158	96	69	206	144	115	275	213	184	170.314
23,000	23,990	ZB	4,0	56	25	126	64	36	162	100	72	212	150	120	284	222	192	170.314
24,000	24,990	ZC	4,1	56	25	128	67	38	166	104	75	218	156	125	293	231	200	170.314
25,000	25,990	ZD	4,3	56	25	131	69	39	170	108	78	225	163	130	303	241	208	170.314
26,000	26,990	ZE	4,5	56	25	135	74	41	176	114	81	230	168	135	313	251	216	170.314
27,000	27,990	ZE	4,7	56	25	137	75	42	179	117	84	237	175	140	321	259	224	170.314

D1 mm	D1 max	seat	L5	LS	flanged D	3 x D L	L3	L4 max	5 x D L	L3	L4 max	8 x D L	L3	L4 max	wrench
.3125	.3343	F	.054	1.77	.5000	3.40	1.41	1.00	4.15	2.16	1.67	5.15	3.16	2.28	170.306
.3390	.3539	G	.059	1.77	.5000	3.52	1.53	1.06	4.27	2.28	1.77	5.27	3.28	2.83	170.306
.3580	.3736	H	.062	1.77	.5000	3.65	1.66	1.12	4.40	2.41	1.87	5.52	3.53	2.99	170.306
.3750	.3933	I	.065	1.77	.5000	3.65	1.66	1.18	4.52	2.53	1.97	5.77	3.78	3.15	170.306
.3946	.4130	J	.068	1.89	.6250	3.89	1.78	1.24	4.76	2.66	2.07	6.01	3.91	3.31	170.307
.4219	.4327	K	.073	1.89	.6250	3.89	1.78	1.30	4.89	2.78	2.17	6.14	4.03	3.46	170.307
.4375	.4524	L	.076	1.89	.6250	4.01	1.91	1.36	5.01	2.91	2.26	6.39	4.28	3.62	170.307
.4531	.4720	M	.078	1.89	.6250	4.14	2.03	1.42	5.14	3.03	2.36	6.51	4.41	3.78	170.307
.4844	.4917	N	.084	1.89	.6250	4.26	2.16	1.48	5.26	3.16	2.46	6.76	4.66	3.94	170.308
.5000	.5114	O	.086	1.89	.6250	4.26	2.16	1.54	5.39	3.28	2.56	6.89	4.78	4.09	170.308
.5156	.5311	P	.089	1.89	.6250	4.39	2.28	1.59	5.51	3.41	2.66	7.01	4.91	4.25	170.308
.5469	.5508	Q	.095	1.89	.6250	4.39	2.28	1.65	5.64	3.53	2.76	7.26	5.16	4.41	170.308
.5625	.5705	R	.097	1.89	.6250	4.51	2.41	1.71	5.76	3.66	2.85	7.51	5.41	4.57	170.309
.5774	.5902	S	.100	1.89	.6250	4.64	2.53	1.77	5.89	3.78	2.95	7.64	5.53	4.72	170.309
.5938	.6295	T	.102	1.97	.7500	4.84	2.66	1.89	6.22	4.03	3.15	8.09	5.91	5.04	170.309
.6310	.6689	U	.109	1.97	.7500	4.97	2.78	2.01	6.47	4.28	3.35	8.47	6.28	5.35	170.309
.6719	.7083	V	.116	1.97	.7500	5.22	3.03	2.13	6.72	4.53	3.54	8.84	6.66	5.67	170.314
.7188	.7476	W	.124	1.97	.7500	5.34	3.16	2.24	6.97	4.78	3.74	9.22	7.03	5.98	170.314
.7500	.7870	X	.129	1.97	.7500	5.47	3.28	2.36	7.22	5.03	3.94	9.47	7.28	6.30	170.314
.7969	.8264	Y	.137	2.20	1.0000	5.95	3.53	2.48	7.58	5.16	4.13	10.08	7.66	6.61	170.314
.8440	.8657	Z	.146	2.20	1.0000	6.08	3.66	2.60	7.95	5.53	4.33	10.45	8.03	6.93	170.314
.8750	.9051	ZA	.151	2.20	1.0000	6.20	3.78	2.72	8.20	5.78	4.53	10.83	8.41	7.24	170.314
.9375	.9445	ZB	.162	2.20	1.0000	6.45	4.03	2.83	8.33	5.91	4.72	11.20	8.78	7.56	170.314
.9690	.9839	ZC	.167	2.20	1.0000	6.58	4.16	2.95	8.58	6.16	4.92	11.58	9.16	7.87	170.314
.9744	1.0232	ZD	.172	2.20	1.0000	6.70	4.28	3.07	8.95	6.53	5.12	11.95	9.53	8.19	170.314
1.0240	1.0620	ZE	.176	2.20	1.0000	6.83	4.41	3.19	9.08	6.66	5.32	11.70	9.28	8.50	170.314
1.0630	1.1020	ZE	.184	2.20	1.0000	6.95	4.53	3.30	9.20	6.78	5.51	11.95	9.53	8.69	170.314

Material Group		Cutting Speed vc			Metric
		Range m/min			Recommended Feed Rate (f) by Diameter
		Min	Starting Value	Max		8,0	10,0	12,0	14,0	16,0	20,0	24,0	28,0
P	1	90	130	180	mm/r	0,12 0,21	0,14 0,26	0,15 0,33	0,18 0,41	0,20 0,47	0,26 0,50	0,27 0,51	0,30–0,54
	2	110	150	190	mm/r	0,12 0,25	0,14 0,30	0,15 0,35	0,18 0,38	0,20 0,47	0,26 0,50	0,27 0,51	0,30–0,54
	3	50	80	110	mm/r	0,12 0,29	0,13 0,37	0,17 0,39	0,22 0,48	0,24 0,48	0,32 0,54	0,32 0,54	0,35–0,56
	4	50	80	110	mm/r	0,12 0,29	0,13 0,37	0,17 0,39	0,18 0,48	0,19 0,48	0,24 0,48	0,35 0,46	0,27–0,46
K	1	60	100	180	mm/r	0,16 0,30	0,17 0,34	0,18 0,37	0,22 0,44	0,26 0,50	0,33 0,62	0,35 0,65	0,40-0,70
	2	60	80	90	mm/r	0,16 0,30	0,17 0,32	0,18 0,35	0,22 0,43	0,26 0,50	0,33 0,62	0,35 0,65	0,40–0,70
	3	40	70	90	mm/r	0,17 0,32	0,18 0,35	0,19 0,38	0,21 0,43	0,22 0,46	0,24 0,50	0,25 0,51	0,40-0,70

Material Group

Cutting Speed vc

Inch

Range SFM

Recommended Feed Rate (f) by Diameter

Min

Starting Value

Max

.315

.394

.472

.551

.630

.787

.945

1.102

295

425

590

IPR

.005–.008

.006–.010

.006–.013

.007–.016

.008–.019

.010–.020

.011–.020

.012–.021

360

490

625

IPR

.005–.010

.006–.012

.006–.014

.007–.015

.008–.019

.010–.020

.011–.020

.012–.021

165

260

360

IPR

.005–.011

.005–.015

.007–.015

.009–.019

.013–.021

.014–.022

165

260

360

IPR

.005–.011

.005–.015

.007–.015

.007–.019

.009–.019

.014–.018

.011–.018

195

330

590

IPR

.006–.012

.007–.013

.007–.015

.009–.017

.010–.020

.013–.024

.014–.026

.016–.028

195

260

295

IPR

.006–.012

.007–.013

.007–.014

.009–.017

.010–.020

.013–.024

.014–.026

.016–.028

130

230

295

IPR

.007–.013

.007–.014

.007–.015

.008–.017

.009–.018

.009–.020

.010–.020

.016–.028

Cutting Speed vc

Metric

Range m/min

Recommended Feed Rate (f) by Diameter

Material Group

Min

Starting Value

Max

8,0

10,0

12,0

14,0

16,0

20,0

24,0

28,0

130

180

mm/dev

0,12–0,21

0,14–0,26

0,15–0,33

0,18–0,41

0,20–0,47

0,26–0,50

0,27–0,51

0,30–0,54

110

150

190

mm/dev

0,12–0,25

0,14–0,30

0,15–0,35

0,18–0,38

0,20–0,47

0,26–0,50

0,27–0,51

0,30–0,54

110

mm/dev

0,12–0,29

0,13–0,37

0,17–0,39

0,22–0,48

0,24–0,48

0,32–0,54

0,35–0,56

110

mm/dev

0,12–0,29

0,13–0,37

0,17–0,39

0,18–0,48

0,19–0,48

0,24–0,48

0,35–0,46

0,27–0,46

100

180

mm/dev

0,16–0,30

0,17–0,34

0,18–0,37

0,22–0,44

0,26–0,50

0,33–0,62

0,35–0,65

0,40–0,70

mm/dev

0,16–0,30

0,17–0,32

0,18–0,35

0,22–0,43

0,26–0,50

0,33–0,62

0,35–0,65

0,40–0,70

mm/dev

0,17–0,32

0,18–0,35

0,19–0,38

0,21–0,43

0,22–0,46

0,24–0,50

0,25–0,51

0,40–0,70

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO catálogo	Grade

Le damos la bienvenida

Confirme sus preferencias

Actualizar preferencias

Sugerencias de productos

Product Family suggestions

Contacte con el Equipo de Ventas

Contacte con el Equipo de Ventas

Edición de la solución

Añadiendo solución

KenTIP™ HP

Plaquitas de metal duro KenTIP™

Uses and application

Materiales de la pieza de trabajo

Features and benefits

Lado de máquina

Lado de la pieza de trabajo

Sugerencias de productos

Product Family suggestions

Contacte con el Equipo de Ventas

Notifications

Contacte con el Equipo de Ventas

Sending to SolidCAM in progress...

KenTIP™ HP

Plaquitas de metal duro KenTIP™

Uses and application

Materiales de la pieza de trabajo

Features and benefits

Lado de máquina

Lado de la pieza de trabajo

The following files are available