Product Suggestions

Product Family suggestions

successfully added to cart
View Cart

Notifications

Mark all as read

Search results for

Select Filters
Filters
Filters
    • Applied Filters:
    • Clear all filters
  • X First Choice:
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1137)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1137)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1137)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1137)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1137)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1137)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1137)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1137)
  • M Stainless Steel (1137)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1137)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1137)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1137)
  • K Cast Iron (1137)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1137)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1137)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1137)
  • N Non-Ferrous Materials (1137)
    • N1
      Wrought Aluminum
      (1137)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1137)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1137)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1137)
  • S High-Temp Alloys (1137)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1137)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1137)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1137)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1137)
  • H Hardened Materials (775)
    • H1
      Hardened Materials 44-48 HRC
      (775)
    • H2
      Hardened Materials 48-55 HRC
      (775)
Select First Choice
  • BR (157)
  • CN (881)
  • DE (856)
  • GB (564)
  • IN (182)
  • SG (292)
  • US (1137)
Applications
Applications
  • Cross Hole Drilling Cross Hole Drilling (362)
  • Drilling Drilling (1137)
  • Inclined Exit Drilling Inclined Exit Drilling (362)
  • Stacked Plates Drilling Stacked Plates Drilling (1137)
Cutting Diameter
Cutting Diameter
  • 0.094 in (5)
  • 0.096 in (5)
  • 0.098 in (10)
  • 0.106 in (9)
  • 0.119 in (7)
  • 0.122 in (6)
  • 0.125 in (7)
  • 0.126 in (6)
  • 0.13 in (6)
  • 0.136 in (6)
  • 0.138 in (6)
  • 0.143 in (7)
  • 0.15 in (7)
  • 0.156 in (7)
  • 0.157 in (7)
  • 0.159 in (6)
  • 0.161 in (9)
  • 0.165 in (7)
  • 0.177 in (9)
  • 0.181 in (6)
  • 0.182 in (6)
  • 0.188 in (7)
  • 0.189 in (7)
  • 0.193 in (6)
  • 0.197 in (7)
  • 0.201 in (13)
  • 0.206 in (7)
  • 0.209 in (7)
  • 0.213 in (11)
  • 0.217 in (7)
  • 0.219 in (8)
  • 0.221 in (10)
  • 0.224 in (7)
  • 0.228 in (8)
  • 0.234 in (6)
  • 0.237 in (7)
  • 0.24 in (6)
  • 0.244 in (7)
  • 0.248 in (6)
  • 0.25 in (7)
  • 0.252 in (6)
  • 0.256 in (7)
  • 0.257 in (7)
  • 0.26 in (7)
  • 0.264 in (7)
  • 0.266 in (7)
  • 0.268 in (7)
  • 0.272 in (7)
  • 0.276 in (7)
  • 0.281 in (7)
  • 0.291 in (6)
  • 0.295 in (7)
  • 0.297 in (7)
  • 0.307 in (6)
  • 0.313 in (7)
  • 0.315 in (7)
  • 0.319 in (7)
  • 0.323 in (6)
  • 0.328 in (7)
  • 0.332 in (6)
  • 0.335 in (7)
  • 0.339 in (6)
  • 0.343 in (7)
  • 0.345 in (7)
  • 0.347 in (7)
  • 0.354 in (7)
  • 0.359 in (6)
  • 0.362 in (6)
  • 0.366 in (6)
  • 0.374 in (7)
  • 0.375 in (7)
  • 0.378 in (6)
  • 0.382 in (6)
  • 0.386 in (6)
  • 0.391 in (7)
  • 0.394 in (7)
  • 0.402 in (6)
  • 0.408 in (7)
  • 0.414 in (7)
  • 0.421 in (6)
  • 0.422 in (7)
  • 0.425 in (7)
  • 0.433 in (7)
  • 0.438 in (7)
  • 0.441 in (7)
  • 0.453 in (14)
  • 0.465 in (6)
  • 0.47 in (11)
  • 0.473 in (7)
  • 0.484 in (8)
  • 0.5 in (7)
  • 0.512 in (7)
  • 0.516 in (7)
  • 0.531 in (9)
  • 0.551 in (7)
  • 0.564 in (8)
  • 0.61 in (6)
  • 0.625 in (7)
  • 0.63 in (6)
  • 0.656 in (6)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 2.375 mm (5)
  • 2.45 mm (5)
  • 2.5 mm (10)
  • 2.7 mm (9)
  • 3.0 mm (7)
  • 3.1 mm (6)
  • 3.176 mm (7)
  • 3.2 mm (6)
  • 3.301 mm (6)
  • 3.45 mm (6)
  • 3.5 mm (6)
  • 3.6 mm (7)
  • 3.801 mm (7)
  • 3.975 mm (7)
  • 4.0 mm (7)
  • 4.05 mm (6)
  • 4.101 mm (9)
  • 4.2 mm (7)
  • 4.5 mm (9)
  • 4.601 mm (6)
  • 4.625 mm (6)
  • 4.775 mm (7)
  • 4.801 mm (7)
  • 4.9 mm (6)
  • 5.0 mm (7)
  • 5.101 mm (13)
  • 5.2 mm (7)
  • 5.301 mm (7)
  • 5.4 mm (11)
  • 5.5 mm (7)
  • 5.551 mm (7)
  • 5.601 mm (6)
  • 5.7 mm (7)
  • 5.801 mm (8)
  • 5.95 mm (6)
  • 6.0 mm (7)
  • 6.101 mm (6)
  • 6.2 mm (7)
  • 6.301 mm (6)
  • 6.351 mm (7)
  • 6.4 mm (6)
  • 6.5 mm (7)
  • 6.525 mm (7)
  • 6.601 mm (7)
  • 6.7 mm (7)
  • 6.75 mm (7)
  • 6.801 mm (7)
  • 6.9 mm (7)
  • 7.0 mm (7)
  • 7.15 mm (7)
  • 7.4 mm (6)
  • 7.5 mm (7)
  • 7.551 mm (7)
  • 7.801 mm (6)
  • 7.95 mm (7)
  • 8.0 mm (7)
  • 8.1 mm (7)
  • 8.201 mm (6)
  • 8.326 mm (7)
  • 8.425 mm (6)
  • 8.5 mm (7)
  • 8.6 mm (6)
  • 8.701 mm (7)
  • 8.725 mm (7)
  • 8.8 mm (7)
  • 9.0 mm (7)
  • 9.125 mm (6)
  • 9.201 mm (6)
  • 9.3 mm (6)
  • 9.5 mm (7)
  • 9.525 mm (7)
  • 9.601 mm (6)
  • 9.701 mm (6)
  • 9.8 mm (6)
  • 9.925 mm (7)
  • 10.0 mm (7)
  • 10.201 mm (6)
  • 10.326 mm (7)
  • 10.5 mm (7)
  • 10.701 mm (6)
  • 10.726 mm (7)
  • 10.8 mm (7)
  • 11.0 mm (7)
  • 11.125 mm (7)
  • 11.201 mm (7)
  • 11.5 mm (14)
  • 11.8 mm (6)
  • 11.9 mm (11)
  • 12.0 mm (7)
  • 12.3 mm (8)
  • 12.701 mm (7)
  • 13.0 mm (7)
  • 13.101 mm (7)
  • 13.5 mm (9)
  • 14.0 mm (7)
  • 14.3 mm (8)
  • 15.5 mm (6)
  • 15.875 mm (7)
  • 16.0 mm (6)
  • 16.675 mm (6)
Cutting Diameter Min to Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 5.0 mm (12)
  • 6.0 mm (21)
  • 9.0 mm (10)
  • 10.0 mm (10)
  • 11.0 mm (12)
  • 12.0 mm (32)
  • 14.0 mm (49)
  • 17.0 mm (73)
  • 20.0 mm (61)
  • 23.0 mm (41)
  • 24.0 mm (39)
  • 29.0 mm (85)
  • 30.0 mm (1)
  • 33.0 mm (2)
  • 35.0 mm (137)
  • 40.0 mm (61)
  • 41.0 mm (4)
  • 43.0 mm (114)
  • 45.0 mm (21)
  • 48.0 mm (10)
  • 49.0 mm (77)
  • 51.0 mm (18)
  • 55.0 mm (6)
  • 56.0 mm (69)
  • 57.0 mm (11)
  • 60.0 mm (43)
  • 63.0 mm (36)
  • 64.0 mm (5)
  • 71.0 mm (22)
  • 77.0 mm (14)
  • 79.0 mm (1)
  • 80.0 mm (15)
  • 96.0 mm (12)
  • 112.0 mm (4)
  • 128.0 mm (5)
  • 144.0 mm (3)
  • 160.0 mm (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.197 in (12)
  • 0.237 in (21)
  • 0.354 in (10)
  • 0.394 in (10)
  • 0.433 in (12)
  • 0.473 in (32)
  • 0.551 in (49)
  • 0.669 in (73)
  • 0.787 in (61)
  • 0.906 in (41)
  • 0.946 in (39)
  • 1.143 in (85)
  • 1.181 in (1)
  • 1.299 in (2)
  • 1.379 in (137)
  • 1.575 in (61)
  • 1.614 in (4)
  • 1.693 in (114)
  • 1.772 in (21)
  • 1.891 in (10)
  • 1.929 in (77)
  • 2.008 in (18)
  • 2.165 in (6)
  • 2.205 in (69)
  • 2.244 in (11)
  • 2.362 in (43)
  • 2.48 in (36)
  • 2.52 in (5)
  • 2.795 in (22)
  • 3.031 in (14)
  • 3.11 in (1)
  • 3.15 in (15)
  • 3.781 in (12)
  • 4.409 in (4)
  • 5.039 in (5)
  • 5.67 in (3)
  • 6.299 in (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.276 in (12)
  • 0.354 in (21)
  • 0.473 in (10)
  • 0.512 in (10)
  • 0.63 in (12)
  • 0.669 in (32)
  • 0.709 in (10)
  • 0.787 in (39)
  • 0.866 in (32)
  • 0.946 in (41)
  • 1.102 in (102)
  • 1.339 in (39)
  • 1.417 in (50)
  • 1.496 in (1)
  • 1.575 in (2)
  • 1.614 in (35)
  • 1.732 in (61)
  • 1.85 in (76)
  • 1.929 in (4)
  • 2.087 in (81)
  • 2.165 in (61)
  • 2.205 in (10)
  • 2.362 in (33)
  • 2.402 in (77)
  • 2.559 in (21)
  • 2.638 in (11)
  • 2.795 in (69)
  • 2.874 in (18)
  • 2.914 in (5)
  • 3.031 in (43)
  • 3.11 in (6)
  • 3.269 in (36)
  • 3.622 in (15)
  • 3.661 in (22)
  • 3.701 in (1)
  • 3.976 in (14)
  • 4.331 in (12)
  • 5.039 in (4)
  • 5.748 in (5)
  • 6.417 in (3)
  • 7.126 in (1)
Reach Min to Reach Max
Reach
Reach
  • 7.0 mm (12)
  • 9.0 mm (21)
  • 12.0 mm (10)
  • 13.0 mm (10)
  • 16.0 mm (12)
  • 17.0 mm (32)
  • 18.0 mm (10)
  • 20.0 mm (39)
  • 22.0 mm (32)
  • 24.0 mm (41)
  • 28.0 mm (102)
  • 34.0 mm (39)
  • 36.0 mm (50)
  • 38.0 mm (1)
  • 40.0 mm (2)
  • 41.0 mm (35)
  • 44.0 mm (61)
  • 47.0 mm (76)
  • 49.0 mm (4)
  • 53.0 mm (81)
  • 55.0 mm (61)
  • 56.0 mm (10)
  • 60.0 mm (33)
  • 61.0 mm (77)
  • 65.0 mm (21)
  • 67.0 mm (11)
  • 71.0 mm (69)
  • 73.0 mm (18)
  • 74.0 mm (5)
  • 77.0 mm (43)
  • 79.0 mm (6)
  • 83.0 mm (36)
  • 92.0 mm (15)
  • 93.0 mm (22)
  • 94.0 mm (1)
  • 101.0 mm (14)
  • 110.0 mm (12)
  • 128.0 mm (4)
  • 146.0 mm (5)
  • 163.0 mm (3)
  • 181.0 mm (1)
Reach Min to Reach Max
Internal Coolant Capability
Internal Coolant Capability
application
Coating
Coating
  • TiAlN (361)
  • TiN (775)
  • Uncoated (1)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC7315 (362)
  • KC7325 (775)
frontEnd
Point Angle
Point Angle
  • 132.0 (73)
  • 140.0 (1064)
Point Angle Min to Point Angle Max
backEnd
Back-End Diameter
Back-End Diameter
  • 3.0 mm (12)
  • 4.0 mm (127)
  • 6.0 mm (309)
  • 8.0 mm (172)
  • 10.0 mm (168)
  • 12.0 mm (143)
  • 14.0 mm (80)
  • 16.0 mm (62)
  • 18.0 mm (43)
  • 20.0 mm (21)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.119 in (12)
  • 0.157 in (127)
  • 0.237 in (309)
  • 0.315 in (172)
  • 0.394 in (168)
  • 0.473 in (143)
  • 0.551 in (80)
  • 0.63 in (62)
  • 0.709 in (43)
  • 0.787 in (21)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
Narrow by category:
Solid Carbide Drills
    • Applied Filters:
    • Clear all filters
  • X First Choice:
View Products in
Metric
Inch

ORIGINAL PRODUCT

Brocas de metal duro integral

GOdrill™ • Amplia gama de materiales
(193 Products)
  • Mango — Liso cilíndrico ≤h6Mango — Liso cilíndrico ≤h6
  • Número DIN 6535Número DIN 6535
  • TaladradoTaladrado
  • Refrigerante para caudal: TaladradoRefrigerante para caudal: Taladrado
  • Mango — Whistle Notch 2° cilíndricoMango — Whistle Notch 2° cilíndrico
  • Ángulo de la hélice: 30°Ángulo de la hélice: 30°
  • Número DIN 6537Número DIN 6537
  • Taladrado: Placas apiladasTaladrado: Placas apiladas
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1] Drill Diameter M [D1] Drill Diameter M [L] Overall Length [L] Overall Length [L3] Flute Length [L3] Flute Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L5] Drill Point Length [L5] Drill Point Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter
4150799 B042A15000CPG B042A15000CPG KC7325   15.0000 .5906 133.0000 5.236 83.0000 3.267 63.0000 2.480 2.5900 .1020 48.0 1.889 16.0 .6299
    List price:
    $194.51 /each.
    Your price::
    4150800 B042A15083CPG B042A15083CPG KC7325   15.0830 .5938 133.0000 5.236 83.0000 3.267 63.0000 2.480 2.6100 .1028 48.0 1.889 16.0 .6299
      List price:
      $206.17 /each.
      Your price::
      4150805 B042A15479CPG B042A15479CPG KC7325   15.4790 .6094 133.0000 5.236 83.0000 3.267 63.0000 2.480 2.6800 .1055 48.0 1.889 16.0 .6299
        List price:
        $206.17 /each.
        Your price::
        4150806 B042A15500CPG B042A15500CPG KC7325   15.5000 .6102 133.0000 5.236 83.0000 3.267 63.0000 2.480 2.6800 .1055 48.0 1.889 16.0 .6299
          List price:
          $206.17 /each.
          Your price::
          4150810 B042A15875CPG B042A15875CPG KC7325   15.8750 .6250 133.0000 5.236 83.0000 3.267 63.0000 2.480 2.7500 .1083 48.0 1.889 16.0 .6299
            List price:
            $206.17 /each.
            Your price::
            4150812 B042A16000CPG B042A16000CPG KC7325   16.0000 .6299 133.0000 5.236 83.0000 3.267 63.0000 2.480 2.7700 .1091 48.0 1.889 16.0 .6299
              List price:
              $206.17 /each.
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance

              ORIGINAL PRODUCT

              Brocas de metal duro integral

              GOdrill™ • Amplia gama de materiales • Con refrigeración interior
              (182 Products)
              • TaladradoTaladrado
              • Mango — Liso cilíndrico ≤h6Mango — Liso cilíndrico ≤h6
              • Ángulo de la hélice: 30°Ángulo de la hélice: 30°
              • Número DIN 6537Número DIN 6537
              • Número DIN 6535Número DIN 6535
              • Taladrado — Con refrigeración internaTaladrado — Con refrigeración interna
              • Mango — Whistle Notch 2° cilíndricoMango — Whistle Notch 2° cilíndrico
              • Taladrado: Placas apiladasTaladrado: Placas apiladas
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1] Drill Diameter M [D1] Drill Diameter M [L] Overall Length [L] Overall Length [L3] Flute Length [L3] Flute Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L5] Drill Point Length [L5] Drill Point Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter
              4148804 B051A01500CPG B051A01500CPG KC7325   1.5000 .0591 58.0000 2.283 9.0000 .3543 6.0000 .2362 0.2300 .0091 28.0 1.102 4.0 .1575
                List price:
                $63.71 /each.
                Your price::
                4148805 B051A01600CPG B051A01600CPG KC7325   1.6000 .0630 58.0000 2.283 9.0000 .3543 6.0000 .2362 0.2500 .0098 28.0 1.102 4.0 .1575
                  List price:
                  $63.71 /each.
                  Your price::
                  4148475 B051A18000CPG B051A18000CPG KC7325   18.0000 .7087 123.0000 4.842 73.0000 2.874 51.0000 2.007 3.1200 .1228 48.0 1.889 18.0 .7087
                    List price:
                    $332.31 /each.
                    Your price::
                    4148476 B051A18100CPG B051A18100CPG KC7325   18.1000 .7126 131.0000 5.157 79.0000 3.110 55.0000 2.165 3.1400 .1236 50.0 1.968 20.0 .7874
                      List price:
                      $384.25 /each.
                      Your price::
                      4148481 B051A18500CPG B051A18500CPG KC7325   18.5000 .7283 131.0000 5.157 79.0000 3.110 55.0000 2.165 3.2100 .1264 50.0 1.968 20.0 .7874
                        List price:
                        $384.25 /each.
                        Your price::
                        4148588 B051A19050CPG B051A19050CPG KC7325   19.0500 .7500 131.0000 5.157 79.0000 3.110 55.0000 2.165 3.3100 .1303 50.0 1.968 20.0 .7874
                          List price:
                          $387.96 /each.
                          Your price::
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is no longer available
                          Replacement Product Please contact customer service for assistance

                          ORIGINAL PRODUCT

                          Brocas de metal duro integral

                          GOdrill™ • Amplia gama de materiales • Con refrigeración interior
                          (200 Products)
                          • Número DIN 6537Número DIN 6537
                          • TaladradoTaladrado
                          • Mango — Liso cilíndrico ≤h6Mango — Liso cilíndrico ≤h6
                          • Mango — Whistle Notch 2° cilíndricoMango — Whistle Notch 2° cilíndrico
                          • Taladrado — Con refrigeración internaTaladrado — Con refrigeración interna
                          • Ángulo de la hélice: 30°Ángulo de la hélice: 30°
                          • Número DIN 6535Número DIN 6535
                          • Taladrado: Placas apiladasTaladrado: Placas apiladas
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1] Drill Diameter M [D1] Drill Diameter M [L] Overall Length [L] Overall Length [L3] Flute Length [L3] Flute Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L5] Drill Point Length [L5] Drill Point Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter
                          4149203 B052A04600CPG B052A04600CPG KC7325   4.6000 .1811 74.0000 2.913 36.0000 1.417 29.0000 1.141 0.7600 .0299 36.0 1.417 6.0 .2362
                            List price:
                            $82.79 /each.
                            Your price::
                            4149204 B052A04623CPG B052A04623CPG KC7325   4.6230 .1820 74.0000 2.913 36.0000 1.417 29.0000 1.141 0.7600 .0299 36.0 1.417 6.0