External Turning • Swiss Type
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (876)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(809)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(809)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(809)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(809)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(809)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(876)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(876)
- M Stainless Steel (856)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(856)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(856)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(856)
- K Cast Iron (662)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(662)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(662)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(662)
- N Non-Ferrous Materials (663)
- N1Wrought Aluminum (658)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(658)
- N3High-Silicon Aluminum Alloys Si >12.2%(411)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (663)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (658)
- N6Carbon, Graphite Composites, CFRP (652)
- N7MMC's (589)
- S High-Temp Alloys (742)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(742)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(742)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(742)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(707)
- H Hardened Materials (515)
- H1Hardened Materials 44-48 HRC(515)
- H2Hardened Materials 48-55 HRC(508)
- H3Hardened Materials 56-60 HRC(508)
- H4Hardened Materials >60 HRC(416)
Select First Choice
- CN (62)
- DE (60)
- GB (39)
- IN (2)
- SG (10)
- US (77)
Applications
Applications
Back Boring (11)
Boring (11)
Chamfer Turning (8)
Face Grooving (36)
Facing (380)
Grooving (36)
ID Facing (13)
ID Grooving (36)
Multiple Direction Cutting (491)
Plunge Turning (35)
Profiling (516)
Turning (673)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (725)
- Lightly Interrupted Cut (827)
- Smooth Cut (929)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (64)
- 50.0 (20)
- 60.0 (4)
- 62.5 (15)
- 72.5 (14)
- 75.0 (66)
- 90.0 (124)
- 93.0 (179)
- 95.0 (136)
- 107.5 (28)
to
Connection Style
Connection Style
- Toolholder (650)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (21)
- 1.0 (447)
- 2.0 (676)
- 3.0 (86)
- 4.0 (407)
- 6.0 (62)
- 8.0 (171)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 63.5 mm(22)
- 82.55 mm(1)
- 88.9 mm(32)
- 100.0 mm(39)
- 101.6 mm(28)
- 114.295 mm(1)
- 114.3 mm(77)
- 125.0 mm(52)
- 127.0 mm(28)
- 150.0 mm(76)
- 152.4 mm(216)
- 160.0 mm(21)
- 170.0 mm(25)
- 171.25 mm(4)
- 172.5 mm(2)
- 177.8 mm(19)
- 200.0 mm(3)
- 203.2 mm(3)
- 457.2 mm(1)
to
Corner Radius
Corner Radius
- 0.0 mm(191)
- 0.025 mm(192)
- 0.05 mm(199)
- 0.075 mm(42)
- 0.1 mm(432)
- 0.2 mm(464)
- 0.25 mm(1)
- 0.35 mm(21)
- 0.4 mm(585)
- 0.6 mm(8)
- 0.8 mm(613)
- 1.2 mm(457)
- 1.6 mm(275)
- 2.375 mm(31)
- 2.4 mm(94)
- 3.0 mm(1)
- 3.175 mm(26)
- 3.2 mm(20)
- 4.0 mm(21)
- 4.775 mm(13)
- 5.0 mm(7)
- 6.0 mm(4)
- 6.35 mm(6)
- 8.0 mm(1)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(290)
to
Application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K060 (55)
- K090 (52)
- K1 (15)
- K313 (546)
- K68 (358)
- KB1340 (88)
- KB1345 (190)
- KB1610 (239)
- KB1630 (184)
- KB5610 (197)
- KB5630 (266)
- KBH10 (361)
- KBH10B (395)
- KBH20 (398)
- KBH20B (392)
- KC5010 (642)
- KC5020P (39)
- KC5025 (559)
- KC5410 (494)
- KC730 (573)
- KC850 (613)
- KC9125 (18)
- KCK05 (448)
- KCK05B (207)
- KCK15 (463)
- KCK15B (465)
- KCK20 (512)
- KCK20B (500)
- KCM15 (440)
- KCM15B (463)
- KCM25 (561)
- KCM25B (552)
- KCM25S (167)
- KCM35 (465)
- KCM35B (190)
- KCP05 (386)
- KCP05B (247)
- KCP10 (579)
- KCP10B (592)
- KCP10C (103)
- KCP15 (28)
- KCP20S (153)
- KCP25 (594)
- KCP25B (580)
- KCP25C (642)
- KCP30 (540)
- KCP30B (253)
- KCP40 (246)
- KCP40B (290)
- KCPK05 (259)
- KCS10 (375)
- KCS10B (562)
- KCS25S (164)
- KCU10 (619)
- KCU10B (639)
- KCU25 (574)
- KCU25B (593)
- KD1400 (366)
- KD1405 (142)
- KD1425 (361)
- KN10S (221)
- KS15 (55)
- KT315 (453)
- KT325 (290)
- KTP10 (427)
- KTP25S (483)
- KY1540 (55)
- KY1615 (8)
- KY3500 (230)
- KY4300 (135)
- KY4400 (192)
- KYHK15B (230)
- KYK10 (116)
- KYK25 (184)
- KYS25 (75)
- KYS30 (104)
- SP4019 (126)
- THM (6)
- X00580 (55)
- X00581 (55)
- X00582 (55)
- X00583 (55)
- X00584 (55)
- X00585 (55)
- X00586 (55)
- X00591 (55)
- X00592 (55)
- X00593 (55)
- X00594 (55)
- X00596 (55)
- X00597 (55)
- X00599 (55)
Hand Of Tool
Hand Of Tool
- L (260)
- N (89)
- R (301)
Wiper Insert
Wiper Insert
- N (927)
- Y (190)
F Dimension
F Dimension
- 4.762 mm(3)
- 5.0 mm(1)
- 6.0 mm(5)
- 6.35 mm(6)
- 7.925 mm(1)
- 7.938 mm(1)
- 7.94 mm(1)
- 8.0 mm(6)
- 9.52 mm(14)
- 9.525 mm(8)
- 10.0 mm(13)
- 11.0 mm(1)
- 11.12 mm(1)
- 11.15 mm(2)
- 12.0 mm(20)
- 12.25 mm(1)
- 12.5 mm(5)
- 12.7 mm(53)
- 13.0 mm(4)
- 13.64 mm(2)
- 13.92 mm(1)
- 13.95 mm(1)
- 14.0 mm(1)
- 14.275 mm(1)
- 15.0 mm(1)
- 15.799 mm(1)
- 15.87 mm(1)
- 15.875 mm(14)
- 15.88 mm(25)
- 16.0 mm(27)
- 16.5 mm(1)
- 16.82 mm(1)
- 17.02 mm(2)
- 17.09 mm(1)
- 17.475 mm(1)
- 17.5 mm(1)
- 18.5 mm(1)
- 18.95 mm(2)
- 19.05 mm(21)
- 19.075 mm(2)
- 20.0 mm(31)
- 20.5 mm(2)
- 20.638 mm(1)
- 21.031 mm(2)
- 21.08 mm(2)
- 22.0 mm(1)
- 22.225 mm(4)
- 22.352 mm(2)
- 23.165 mm(5)
- 24.26 mm(2)
- 25.0 mm(31)
- 25.197 mm(2)
- 25.4 mm(53)
- 25.5 mm(1)
- 25.908 mm(4)
- 25.91 mm(1)
- 27.381 mm(2)
- 28.016 mm(2)
- 28.7 mm(2)
- 31.75 mm(83)
- 31.775 mm(6)
- 32.0 mm(54)
- 32.258 mm(4)
- 32.26 mm(2)
- 33.55 mm(2)
- 34.366 mm(2)
- 35.006 mm(1)
- 38.1 mm(38)
- 38.125 mm(3)
- 38.379 mm(2)
- 38.608 mm(2)
- 40.0 mm(6)
- 40.5 mm(6)
- 44.958 mm(1)
- 46.25 mm(3)
- 50.0 mm(2)
- 50.8 mm(25)
- 50.826 mm(1)
- 57.658 mm(1)
- 63.5 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(29)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 9999.0 mm(29)
to
Cutting Direction
Cutting Direction
- B (151)
- E (60)
- S (439)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (262)
- DOUBLE POSITIVE (18)
- NEGATIVE-ZERO (47)
- NEUTRAL (ZERO) (312)
- POSITIVE-ZERO (11)
Front-End
Clamp Style
Clamp Style
- M (309)
- S (341)
Cutting Width
Cutting Width
- 3.32 mm(2)
- 3.81 mm(8)
- 3.82 mm(7)
- 4.88 mm(6)
- 4.95 mm(9)
- 4.953 mm(4)
to
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (323)
- D-DIAMOND/RHOMBIC 55 (227)
- R-ROUND (52)
- S-SQUARE 90 (67)
- T-TRIANGLE 60 (87)
- TN-TOP NOTCH (36)
- V-DIAMOND/RHOMBIC 35 (131)
- W-TRIGON 80 (17)
Maximum Cutting Depth
Maximum Cutting Depth
- 7.0 mm(2)
- 7.85 mm(2)
- 10.16 mm(2)
- 10.414 mm(1)
- 10.922 mm(2)
- 11.8 mm(2)
- 12.0 mm(1)
- 12.13 mm(2)
- 12.72 mm(2)
- 15.88 mm(1)
- 16.0 mm(3)
- 19.05 mm(2)
- 20.0 mm(3)
- 20.574 mm(3)
- 25.0 mm(4)
- 25.4 mm(15)
- 25.908 mm(4)
- 31.75 mm(1)
to
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
- 2.75 mm(7)
- 2.777 mm(3)
- 3.84 mm(6)
- 3.86 mm(4)
to
Insert Geometry
Shape
Shape
- C-DIAMOND/RHOMBIC 80 (102)
- D-DIAMOND/RHOMBIC 55 (100)
- S-SQUARE 90 (2)
- T-TRIANGLE 60 (10)
- TN-TOP NOTCH (36)
- V-DIAMOND/RHOMBIC 35 (38)
- W-TRIGON 80 (2)
Insert IC Size
Insert IC Size
- 6.35 mm(121)
- 9.525 mm(120)
- 12.7 mm(13)
to
Insert Seat Size
Insert Seat Size
- 2 (15)
- 3 (21)
Cutting Edge Length
Cutting Edge Length
- 6.448 mm(18)
- 6.46 mm(23)
- 6.64 mm(3)
- 7.752 mm(43)
- 7.767 mm(2)
- 8.687 mm(2)
- 9.525 mm(2)
- 9.672 mm(50)
- 9.684 mm(3)
- 10.999 mm(2)
- 11.0 mm(2)
- 11.071 mm(28)
- 11.628 mm(45)
- 11.643 mm(4)
- 12.896 mm(5)
- 15.504 mm(6)
- 16.498 mm(1)
- 16.5 mm(5)
- 16.606 mm(10)
to
Chip Breaker CBMD
Chip Breaker CBMD
- FFS (22)
- FPS (36)
- FWS (7)
- LFS (36)
- M (1)
- MPS (18)
- MWS (4)
- PPS (130)
Cutting Tool Material
Cutting Tool Material
- B H (364)
- B L (398)
- C A (248)
- C N (230)
- D P (381)
- H T (453)
- H W (938)
Tolerance Class
Tolerance Class
- E (102)
- G (86)
- M (66)
Back-End
Connection Type
Connection Type
- SQUARE SHANK (650)
Shank Height
Shank Height
- 7.938 mm(2)
- 8.0 mm(1)
- 9.52 mm(22)
- 9.525 mm(12)
- 10.0 mm(10)
- 12.0 mm(34)
- 12.7 mm(64)
- 15.875 mm(8)
- 15.88 mm(28)
- 16.0 mm(47)
- 19.05 mm(65)
- 20.0 mm(43)
- 25.0 mm(53)
- 25.4 mm(114)
- 31.75 mm(72)
- 32.0 mm(31)
- 38.1 mm(38)
- 40.0 mm(3)
- 50.8 mm(3)
to
Shank Width
Shank Width
- 7.938 mm(2)
- 8.0 mm(1)
- 9.52 mm(21)
- 9.525 mm(13)
- 10.0 mm(10)
- 12.0 mm(34)
- 12.7 mm(63)
- 15.875 mm(10)
- 15.88 mm(27)
- 16.0 mm(47)
- 19.05 mm(65)
- 20.0 mm(43)
- 25.0 mm(69)
- 25.4 mm(121)
- 31.75 mm(65)
- 32.0 mm(15)
- 38.1 mm(38)
- 40.0 mm(3)
- 50.8 mm(3)
to
No filters matching ""
