successfully added to cart
View Cart

Notifications

Mark all as read

Perçage

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (10629)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10138)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10138)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (10141)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (10141)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (10018)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (10376)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (10310)
  • M Stainless Steel (8311)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (8311)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (8311)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (8002)
  • K Cast Iron (9172)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (9172)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (9076)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (9076)
  • N Non-Ferrous Materials (7087)
    • N1
      Wrought Aluminum
      (7045)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (7081)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (7051)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (7005)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (3070)
    • N6
      Carbon, Graphite Composites, CFRP
      (3033)
    • N7
      MMC's
      (2796)
  • S High-Temp Alloys (7363)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (7018)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (7018)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (7024)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (7363)
  • H Hardened Materials (3496)
    • H1
      Hardened Materials 44-48 HRC
      (3496)
    • H2
      Hardened Materials 48-55 HRC
      (3199)
    • H3
      Hardened Materials 56-60 HRC
      (1341)
    • H4
      Hardened Materials >60 HRC
      (1341)
  • C CFRP Materials (198)
    • C1
      CFRP, CFRP / CFRP
      (79)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous
      (183)
    • C3
      CFRP / Titanium CFRP / High Temp
      (178)
    • C4
      CFRP / Stainless Steel
      (178)
Select First Choice
  • BR (375)
  • CN (1825)
  • DE (1849)
  • GB (1184)
  • IN (552)
  • SG (735)
  • US (2257)
Applications
Applications
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (225)
  • Blind Hole Finishing Blind Hole Finishing (324)
  • Chain Drilling Chain Drilling (6)
  • Convex Drilling Convex Drilling (827)
  • Corner Drilling 45° Corner Drilling 45° (6)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (196)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (1190)
  • Counterboring Counterboring (325)
  • Countersinking Countersinking (338)
  • Cross Hole Drilling Cross Hole Drilling (2688)
  • Drilling Drilling (9254)
  • Flat Bottom Drilling Flat Bottom Drilling (202)
  • Grooving Grooving (1)
  • Half Cylindrical Drilling Half Cylindrical Drilling (6)
  • ID Thread Turning ID Thread Turning (37)
  • Inclined Entry Drilling Inclined Entry Drilling (1592)
  • Inclined Exit Drilling Inclined Exit Drilling (4046)
  • Multiple Direction Cutting Multiple Direction Cutting (12)
  • Slot Milling Slot Milling (5)
  • Slot Side Slot Side (5)
  • Slot Square End Slot Square End (5)
  • Stacked Plates Drilling Stacked Plates Drilling (7086)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (154)
  • Through Hole Finishing Through Hole Finishing (248)
  • X-Offset Drilling X-Offset Drilling (461)
Cutting Diameter
Cutting Diameter
  • 0.1181 in (58)
  • 0.125 in (55)
  • 0.1378 in (56)
  • 0.1575 in (66)
  • 0.1772 in (61)
  • 0.1969 in (73)
  • 0.2165 in (65)
  • 0.2362 in (86)
  • 0.25 in (87)
  • 0.2559 in (77)
  • 0.2677 in (70)
  • 0.2756 in (83)
  • 0.2813 in (58)
  • 0.2953 in (63)
  • 0.3125 in (91)
  • 0.315 in (118)
  • 0.3189 in (62)
  • 0.3281 in (68)
  • 0.3346 in (101)
  • 0.3386 in (60)
  • 0.3425 in (64)
  • 0.3438 in (74)
  • 0.3465 in (74)
  • 0.3543 in (100)
  • 0.3583 in (59)
  • 0.3594 in (61)
  • 0.374 in (81)
  • 0.375 in (100)
  • 0.3906 in (64)
  • 0.3937 in (117)
  • 0.4016 in (91)
  • 0.4055 in (67)
  • 0.4063 in (79)
  • 0.4094 in (58)
  • 0.4134 in (96)
  • 0.4219 in (74)
  • 0.4252 in (69)
  • 0.4331 in (100)
  • 0.4375 in (82)
  • 0.4409 in (61)
  • 0.4528 in (84)
  • 0.4531 in (63)
  • 0.4646 in (72)
  • 0.4724 in (102)
  • 0.4844 in (59)
  • 0.4921 in (123)
  • 0.4961 in (65)
  • 0.5 in (138)
  • 0.5039 in (80)
  • 0.5118 in (136)
  • 0.5197 in (69)
  • 0.5315 in (111)
  • 0.5394 in (58)
  • 0.5433 in (69)
  • 0.5512 in (144)
  • 0.5551 in (75)
  • 0.5591 in (71)
  • 0.5625 in (86)
  • 0.563 in (71)
  • 0.5709 in (106)
  • 0.5748 in (60)
  • 0.5827 in (59)
  • 0.5906 in (134)
  • 0.6024 in (70)
  • 0.6102 in (106)
  • 0.6142 in (57)
  • 0.6181 in (58)
  • 0.622 in (64)
  • 0.625 in (101)
  • 0.6299 in (135)
  • 0.6339 in (67)
  • 0.6378 in (70)
  • 0.6406 in (61)
  • 0.6496 in (106)
  • 0.6535 in (57)
  • 0.6563 in (67)
  • 0.6693 in (123)
  • 0.6875 in (89)
  • 0.689 in (116)
  • 0.6929 in (57)
  • 0.6969 in (62)
  • 0.7008 in (57)
  • 0.7087 in (107)
  • 0.7283 in (84)
  • 0.748 in (127)
  • 0.75 in (117)
  • 0.7559 in (65)
  • 0.757 in (57)
  • 0.759 in (59)
  • 0.7677 in (99)
  • 0.7874 in (101)
  • 0.8071 in (63)
  • 0.8268 in (73)
  • 0.8661 in (60)
  • 0.875 in (65)
  • 0.9055 in (59)
  • 0.9449 in (60)
  • 0.9843 in (87)
  • 1.0 in (85)
  • 1.063 in (57)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 3.0 mm (58)
  • 3.175 mm (55)
  • 3.5 mm (54)
  • 4.0 mm (69)
  • 4.5 mm (59)
  • 5.0 mm (73)
  • 5.5 mm (63)
  • 6.0 mm (89)
  • 6.35 mm (87)
  • 6.5 mm (75)
  • 6.8 mm (68)
  • 7.0 mm (83)
  • 7.145 mm (56)
  • 7.5 mm (63)
  • 7.938 mm (54)
  • 8.0 mm (119)
  • 8.1 mm (65)
  • 8.4 mm (53)
  • 8.5 mm (100)
  • 8.6 mm (60)
  • 8.7 mm (64)
  • 8.8 mm (74)
  • 9.0 mm (100)
  • 9.1 mm (61)
  • 9.3 mm (55)
  • 9.5 mm (81)
  • 9.525 mm (100)
  • 9.8 mm (53)
  • 9.921 mm (52)
  • 10.0 mm (120)
  • 10.1 mm (56)
  • 10.2 mm (91)
  • 10.3 mm (67)
  • 10.32 mm (76)
  • 10.4 mm (58)
  • 10.5 mm (94)
  • 10.7 mm (53)
  • 10.8 mm (69)
  • 11.0 mm (100)
  • 11.113 mm (62)
  • 11.2 mm (61)
  • 11.5 mm (84)
  • 11.7 mm (53)
  • 11.8 mm (72)
  • 12.0 mm (105)
  • 12.5 mm (126)
  • 12.6 mm (65)
  • 12.7 mm (138)
  • 12.8 mm (80)
  • 13.0 mm (139)
  • 13.2 mm (69)
  • 13.5 mm (117)
  • 13.6 mm (53)
  • 13.7 mm (58)
  • 13.8 mm (69)
  • 14.0 mm (162)
  • 14.1 mm (77)
  • 14.2 mm (71)
  • 14.288 mm (75)
  • 14.5 mm (117)
  • 14.6 mm (60)
  • 14.8 mm (59)
  • 15.0 mm (149)
  • 15.3 mm (70)
  • 15.5 mm (118)
  • 15.6 mm (57)
  • 15.7 mm (58)
  • 15.8 mm (64)
  • 15.875 mm (95)
  • 16.0 mm (150)
  • 16.1 mm (67)
  • 16.2 mm (70)
  • 16.5 mm (119)
  • 16.6 mm (57)
  • 16.67 mm (69)
  • 17.0 mm (134)
  • 17.5 mm (119)
  • 17.6 mm (57)
  • 17.7 mm (62)
  • 17.8 mm (57)
  • 18.0 mm (121)
  • 18.5 mm (92)
  • 19.0 mm (130)
  • 19.05 mm (114)
  • 19.2 mm (65)
  • 19.228 mm (57)
  • 19.5 mm (107)
  • 19.7 mm (53)
  • 20.0 mm (108)
  • 20.5 mm (67)
  • 21.0 mm (81)
  • 22.0 mm (67)
  • 22.5 mm (57)
  • 23.0 mm (66)
  • 24.0 mm (63)
  • 25.0 mm (91)
  • 25.4 mm (85)
  • 25.5 mm (57)
  • 26.0 mm (56)
  • 27.0 mm (57)
Cutting Diameter Min to Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (145)
  • Interrupted (255)
  • Lightly Interrupted Cut (175)
  • Smooth Cut (287)
  • Stable (367)
  • Unstable (308)
  • Varying Depth of Cut (183)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 5.0 mm (13)
  • 6.0 mm (24)
  • 9.0 mm (21)
  • 10.0 mm (27)
  • 11.0 mm (21)
  • 12.0 mm (38)
  • 14.0 mm (178)
  • 17.0 mm (218)
  • 20.0 mm (278)
  • 21.4 mm (33)
  • 22.0 mm (16)
  • 23.0 mm (162)
  • 24.0 mm (180)
  • 25.0 mm (68)
  • 25.9 mm (12)
  • 27.0 mm (13)
  • 28.3 mm (16)
  • 28.6 mm (37)
  • 29.0 mm (349)
  • 30.0 mm (55)
  • 32.0 mm (13)
  • 33.0 mm (81)
  • 34.7 mm (12)
  • 34.9 mm (53)
  • 35.0 mm (589)
  • 36.0 mm (29)
  • 38.1 mm (22)
  • 39.0 mm (14)
  • 39.6 mm (12)
  • 40.0 mm (305)
  • 40.3 mm (45)
  • 41.0 mm (71)
  • 42.0 mm (21)
  • 43.0 mm (563)
  • 44.0 mm (25)
  • 45.0 mm (216)
  • 48.0 mm (130)
  • 48.7 mm (45)
  • 49.0 mm (336)
  • 50.0 mm (23)
  • 51.0 mm (139)
  • 53.1 mm (34)
  • 54.0 mm (21)
  • 55.0 mm (104)
  • 55.6 mm (26)
  • 56.0 mm (312)
  • 57.0 mm (90)
  • 58.0 mm (16)
  • 60.0 mm (280)
  • 63.0 mm (211)
  • 63.5 mm (19)
  • 64.0 mm (62)
  • 64.5 mm (12)
  • 66.0 mm (20)
  • 68.0 mm (23)
  • 69.0 mm (12)
  • 70.0 mm (22)
  • 71.0 mm (144)
  • 72.0 mm (30)
  • 73.0 mm (13)
  • 75.0 mm (30)
  • 76.0 mm (12)
  • 76.2 mm (25)
  • 77.0 mm (113)
  • 78.0 mm (19)
  • 79.0 mm (13)
  • 80.0 mm (133)
  • 84.0 mm (22)
  • 85.0 mm (18)
  • 88.0 mm (13)
  • 88.9 mm (17)
  • 90.0 mm (36)
  • 95.0 mm (14)
  • 96.0 mm (122)
  • 99.0 mm (12)
  • 100.0 mm (38)
  • 101.6 mm (16)
  • 104.0 mm (21)
  • 105.0 mm (16)
  • 108.0 mm (18)
  • 110.0 mm (13)
  • 112.0 mm (80)
  • 116.0 mm (13)
  • 117.0 mm (17)
  • 120.0 mm (48)
  • 125.0 mm (23)
  • 127.0 mm (12)
  • 128.0 mm (66)
  • 130.0 mm (19)
  • 136.0 mm (13)
  • 140.0 mm (41)
  • 144.0 mm (56)
  • 150.0 mm (26)
  • 160.0 mm (57)
  • 165.0 mm (15)
  • 168.0 mm (17)
  • 180.0 mm (18)
  • 200.0 mm (17)
  • 210.0 mm (14)
  • 240.0 mm (17)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.1969 in (13)
  • 0.2362 in (24)
  • 0.3543 in (16)
  • 0.3937 in (26)
  • 0.4331 in (19)
  • 0.4724 in (37)
  • 0.5512 in (168)
  • 0.6693 in (203)
  • 0.67 in (13)
  • 0.7874 in (268)
  • 0.8425 in (33)
  • 0.8661 in (14)
  • 0.9055 in (159)
  • 0.9449 in (171)
  • 0.984 in (26)
  • 0.9843 in (42)
  • 1.0197 in (12)
  • 1.063 in (12)
  • 1.1142 in (15)
  • 1.126 in (37)
  • 1.1417 in (337)
  • 1.181 in (22)
  • 1.1811 in (33)
  • 1.26 in (10)
  • 1.2992 in (71)
  • 1.3661 in (12)
  • 1.374 in (53)
  • 1.378 in (579)
  • 1.4173 in (20)
  • 1.5 in (23)
  • 1.5591 in (12)
  • 1.5748 in (275)
  • 1.575 in (23)
  • 1.5866 in (45)
  • 1.6142 in (67)
  • 1.6535 in (12)
  • 1.6929 in (552)
  • 1.7323 in (19)
  • 1.7717 in (190)
  • 1.772 in (21)
  • 1.8898 in (118)
  • 1.89 in (13)
  • 1.9173 in (45)
  • 1.9291 in (335)
  • 1.968 in (11)
  • 1.969 in (11)
  • 2.0 in (11)
  • 2.0079 in (131)
  • 2.0906 in (34)
  • 2.126 in (20)
  • 2.1654 in (101)
  • 2.189 in (26)
  • 2.2047 in (306)
  • 2.2441 in (84)
  • 2.362 in (15)
  • 2.3622 in (262)
  • 2.4803 in (204)
  • 2.5 in (19)
  • 2.5197 in (55)
  • 2.5394 in (11)
  • 2.5984 in (12)
  • 2.6772 in (13)
  • 2.7559 in (14)
  • 2.7953 in (144)
  • 2.8346 in (20)
  • 2.874 in (12)
  • 2.9528 in (16)
  • 3.0 in (25)
  • 3.0315 in (112)
  • 3.0709 in (13)
  • 3.1496 in (118)
  • 3.15 in (16)
  • 3.3071 in (16)
  • 3.3465 in (13)
  • 3.5 in (20)
  • 3.54 in (12)
  • 3.5433 in (22)
  • 3.7795 in (114)
  • 3.937 in (35)
  • 4.0 in (16)
  • 4.0945 in (15)
  • 4.252 in (19)
  • 4.4094 in (76)
  • 4.6063 in (11)
  • 4.7244 in (34)
  • 4.9213 in (18)
  • 5.0 in (12)
  • 5.0394 in (61)
  • 5.1181 in (16)
  • 5.5118 in (38)
  • 5.6693 in (50)
  • 5.9055 in (21)
  • 6.2992 in (49)
  • 6.4961 in (12)
  • 6.6142 in (13)
  • 7.0866 in (14)
  • 7.874 in (15)
  • 8.2677 in (12)
  • 8.8189 in (11)
  • 9.4488 in (13)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.2756 in (13)
  • 0.3543 in (24)
  • 0.4724 in (23)
  • 0.5118 in (12)
  • 0.6299 in (19)
  • 0.6693 in (35)
  • 0.7087 in (16)
  • 0.7874 in (177)
  • 0.8661 in (40)
  • 0.9055 in (9)
  • 0.917 in (9)
  • 0.94 in (11)
  • 0.9449 in (169)
  • 0.9843 in (14)
  • 1.063 in (31)
  • 1.1 in (12)
  • 1.1024 in (410)
  • 1.1417 in (11)
  • 1.1811 in (39)
  • 1.272 in (9)
  • 1.2992 in (13)
  • 1.3386 in (182)
  • 1.378 in (39)
  • 1.4173 in (205)
  • 1.469 in (11)
  • 1.4961 in (24)
  • 1.5748 in (67)
  • 1.6142 in (155)
  • 1.667 in (13)
  • 1.6929 in (51)
  • 1.7323 in (265)
  • 1.811 in (24)
  • 1.85 in (11)
  • 1.8504 in (300)
  • 1.9291 in (71)
  • 1.9685 in (47)
  • 2.0079 in (26)
  • 2.0472 in (19)
  • 2.0866 in (359)
  • 2.126 in (41)
  • 2.1654 in (275)
  • 2.17 in (12)
  • 2.2047 in (110)
  • 2.2441 in (18)
  • 2.3228 in (15)
  • 2.3622 in (245)
  • 2.4016 in (339)
  • 2.4803 in (22)
  • 2.5591 in (181)
  • 2.5984 in (38)
  • 2.6378 in (92)
  • 2.6772 in (13)
  • 2.7559 in (31)
  • 2.7953 in (292)
  • 2.8346 in (13)
  • 2.874 in (137)
  • 2.9134 in (58)
  • 2.9921 in (27)
  • 3.0315 in (215)
  • 3.1102 in (106)
  • 3.189 in (11)
  • 3.2283 in (27)
  • 3.2677 in (210)
  • 3.3465 in (14)
  • 3.3858 in (15)
  • 3.4252 in (15)
  • 3.622 in (117)
  • 3.6614 in (142)
  • 3.7008 in (13)
  • 3.7402 in (10)
  • 3.8189 in (19)
  • 3.8583 in (11)
  • 3.937 in (20)
  • 3.9764 in (120)
  • 4.02 in (11)
  • 4.2126 in (10)
  • 4.252 in (10)
  • 4.3307 in (105)
  • 4.3701 in (15)
  • 4.4094 in (12)
  • 4.4882 in (11)
  • 4.6063 in (29)
  • 4.685 in (15)
  • 4.7244 in (10)
  • 4.7638 in (11)
  • 4.9213 in (10)
  • 5.0394 in (62)
  • 5.1181 in (16)
  • 5.1969 in (20)
  • 5.3543 in (17)
  • 5.4331 in (12)
  • 5.4724 in (10)
  • 5.748 in (67)
  • 5.7874 in (20)
  • 5.8268 in (11)
  • 6.378 in (15)
  • 6.4173 in (52)
  • 7.126 in (32)
  • 7.3622 in (14)
  • 7.7165 in (10)
Reach Min to Reach Max
Reach
Reach
  • 7.0 mm (13)
  • 9.0 mm (24)
  • 12.0 mm (23)
  • 13.0 mm (12)
  • 16.0 mm (19)
  • 17.0 mm (35)
  • 18.0 mm (16)
  • 20.0 mm (182)
  • 22.0 mm (41)
  • 24.0 mm (179)
  • 25.0 mm (16)
  • 27.0 mm (31)
  • 28.0 mm (422)
  • 29.0 mm (13)
  • 30.0 mm (42)
  • 33.0 mm (14)
  • 34.0 mm (190)
  • 35.0 mm (39)
  • 36.0 mm (209)
  • 37.3 mm (11)
  • 38.0 mm (32)
  • 40.0 mm (69)
  • 41.0 mm (158)
  • 42.33 mm (13)
  • 43.0 mm (53)
  • 44.0 mm (270)
  • 45.0 mm (11)
  • 46.0 mm (24)
  • 47.0 mm (311)
  • 49.0 mm (76)
  • 50.0 mm (52)
  • 51.0 mm (31)
  • 52.0 mm (21)
  • 53.0 mm (363)
  • 54.0 mm (41)
  • 55.0 mm (291)
  • 56.0 mm (114)
  • 57.0 mm (20)
  • 59.0 mm (17)
  • 60.0 mm (256)
  • 61.0 mm (342)
  • 63.0 mm (22)
  • 64.0 mm (14)
  • 65.0 mm (188)
  • 66.0 mm (41)
  • 67.0 mm (96)
  • 68.0 mm (25)
  • 70.0 mm (39)
  • 71.0 mm (294)
  • 72.0 mm (13)
  • 73.0 mm (137)
  • 74.0 mm (61)
  • 75.0 mm (13)
  • 76.0 mm (30)
  • 77.0 mm (222)
  • 79.0 mm (110)
  • 80.0 mm (13)
  • 82.0 mm (30)
  • 83.0 mm (216)
  • 85.0 mm (20)
  • 86.0 mm (24)
  • 87.0 mm (20)
  • 92.0 mm (118)
  • 93.0 mm (145)
  • 94.0 mm (17)
  • 96.0 mm (12)
  • 97.0 mm (22)
  • 98.0 mm (13)
  • 99.0 mm (13)
  • 100.0 mm (20)
  • 101.0 mm (125)
  • 102.0 mm (13)
  • 104.0 mm (14)
  • 107.0 mm (12)
  • 109.0 mm (13)
  • 110.0 mm (109)
  • 111.0 mm (15)
  • 112.0 mm (15)
  • 114.0 mm (12)
  • 115.0 mm (15)
  • 117.0 mm (32)
  • 119.0 mm (17)
  • 120.0 mm