Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Notifications

Mark all as read

GOtap

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (781)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (781)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (781)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (738)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (738)
  • M Stainless Steel (792)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (792)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (749)
  • K Cast Iron (753)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (753)
  • N Non-Ferrous Materials (128)
    • N1
      Wrought Aluminum
      (113)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (128)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (113)
Select First Choice
  • BR (16)
  • CN (100)
  • DE (92)
  • GB (45)
  • IN (3)
  • SG (28)
  • US (267)
Applications
Applications
  • Pipe Thread Pipe Thread (43)
  • Tapping Blind Hole Tapping Blind Hole (468)
  • Tapping Through Hole Tapping Through Hole (341)
  • Threading Threading (809)
Cutting Length
Cutting Length
  • 5.0 mm (4)
  • 7.0 mm (20)
  • 8.0 mm (18)
  • 8.201 mm (1)
  • 9.0 mm (4)
  • 9.1 mm (1)
  • 9.5 mm (1)
  • 9.701 mm (47)
  • 9.9 mm (8)
  • 10.0 mm (20)
  • 10.101 mm (1)
  • 11.0 mm (9)
  • 11.5 mm (2)
  • 11.701 mm (1)
  • 12.0 mm (20)
  • 12.101 mm (1)
  • 12.201 mm (3)
  • 12.5 mm (3)
  • 12.701 mm (42)
  • 13.0 mm (35)
  • 13.201 mm (5)
  • 13.4 mm (1)
  • 14.201 mm (2)
  • 14.8 mm (10)
  • 14.9 mm (2)
  • 15.0 mm (58)
  • 15.8 mm (2)
  • 16.0 mm (42)
  • 17.0 mm (5)
  • 17.3 mm (3)
  • 17.475 mm (3)
  • 17.5 mm (42)
  • 18.0 mm (27)
  • 18.7 mm (3)
  • 18.901 mm (2)
  • 19.0 mm (7)
  • 19.05 mm (8)
  • 19.1 mm (34)
  • 20.0 mm (17)
  • 21.0 mm (21)
  • 22.0 mm (8)
  • 22.3 mm (8)
  • 22.401 mm (14)
  • 23.0 mm (4)
  • 23.901 mm (40)
  • 24.0 mm (23)
  • 25.0 mm (21)
  • 25.401 mm (17)
  • 26.201 mm (8)
  • 27.701 mm (41)
  • 28.0 mm (1)
  • 29.0 mm (1)
  • 30.0 mm (18)
  • 31.0 mm (14)
  • 33.0 mm (1)
  • 34.0 mm (5)
  • 34.926 mm (7)
  • 35.0 mm (7)
  • 36.0 mm (4)
  • 38.0 mm (1)
  • 38.1 mm (6)
  • 40.0 mm (8)
  • 42.0 mm (4)
  • 43.5 mm (4)
  • 44.45 mm (2)
  • 48.0 mm (2)
  • 50.0 mm (4)
  • 55.0 mm (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.197 in (4)
  • 0.276 in (20)
  • 0.315 in (18)
  • 0.323 in (1)
  • 0.354 in (4)
  • 0.358 in (1)
  • 0.374 in (1)
  • 0.382 in (47)
  • 0.39 in (8)
  • 0.394 in (20)
  • 0.398 in (1)
  • 0.433 in (9)
  • 0.453 in (2)
  • 0.461 in (1)
  • 0.473 in (20)
  • 0.477 in (1)
  • 0.48 in (3)
  • 0.492 in (3)
  • 0.5 in (42)
  • 0.512 in (35)
  • 0.52 in (5)
  • 0.528 in (1)
  • 0.559 in (2)
  • 0.583 in (10)
  • 0.587 in (2)
  • 0.591 in (58)
  • 0.622 in (2)
  • 0.63 in (42)
  • 0.669 in (5)
  • 0.681 in (3)
  • 0.689 in (3)
  • 0.69 in (42)
  • 0.709 in (27)
  • 0.736 in (3)
  • 0.744 in (2)
  • 0.748 in (7)
  • 0.75 in (8)
  • 0.752 in (34)
  • 0.787 in (17)
  • 0.828 in (21)
  • 0.866 in (8)
  • 0.878 in (8)
  • 0.882 in (14)
  • 0.906 in (4)
  • 0.942 in (40)
  • 0.946 in (23)
  • 0.984 in (21)
  • 1.0 in (17)
  • 1.031 in (8)
  • 1.091 in (41)
  • 1.102 in (1)
  • 1.143 in (1)
  • 1.181 in (18)
  • 1.22 in (14)
  • 1.299 in (1)
  • 1.339 in (5)
  • 1.375 in (7)
  • 1.379 in (7)
  • 1.417 in (4)
  • 1.496 in (1)
  • 1.5 in (6)
  • 1.575 in (8)
  • 1.655 in (4)
  • 1.713 in (4)
  • 1.75 in (2)
  • 1.891 in (2)
  • 1.969 in (4)
  • 2.165 in (1)
Cutting Length Min to Cutting Length Max
Type of Thread
Type of Thread
  • G Internal Thread Parallel (15)
  • M-Metric/ISO (334)
  • National Pipe Thread (16)
  • National Pipe Thread Fuel (12)
  • UNC (245)
  • UNF (169)
  • UNJ (18)
Thread Size
Thread Size
  • 1 - 11 (2)
  • 1 - 11 1/2 (2)
  • 1 - 12 (3)
  • 1 - 8 (7)
  • 1 1/2 - 12 (1)
  • 1 1/2 - 6 (2)
  • 1 1/4 - 12 (1)
  • 1 1/4 - 7 (3)
  • 1 1/8 - 12 (2)
  • 1 1/8 - 7 (4)
  • 1 3/4 - 5 (1)
  • 1 3/8 - 12 (1)
  • 1 3/8 - 6 (1)
  • 1/16 - 27 (3)
  • 1/2 - 13 (18)
  • 1/2 - 14 (6)
  • 1/2 - 20 (17)
  • 1/4 - 18 (4)
  • 1/4 - 19 (2)
  • 1/4 - 20 (23)
  • 1/4 - 28 (23)
  • 1/8 - 27 (8)
  • 1/8 - 28 (3)
  • 10 - 24 (19)
  • 10 - 32 (24)
  • 12 - 24 (2)
  • 12 - 28 (3)
  • 2 - 4 1/2 (1)
  • 2 - 56 (4)
  • 3 - 48 (2)
  • 3/4 - 10 (10)
  • 3/4 - 14 (5)
  • 3/4 - 16 (9)
  • 3/8 - 16 (20)
  • 3/8 - 18 (4)
  • 3/8 - 19 (2)
  • 3/8 - 24 (20)
  • 4 - 40 (22)
  • 4 - 48 (3)
  • 5 - 40 (3)
  • 5/16 - 18 (20)
  • 5/16 - 24 (20)
  • 5/8 - 11 (16)
  • 5/8 - 14 (1)
  • 5/8 - 18 (16)
  • 6 - 32 (23)
  • 6 - 40 (6)
  • 7/16 - 14 (11)
  • 7/16 - 20 (18)
  • 7/8 - 14 (4)
  • 7/8 - 9 (5)
  • 8 - 32 (27)
  • 8 - 36 (2)
  • 9/16 - 12 (8)
  • 9/16 - 18 (8)
  • M10 X 0,75 (2)
  • M10 X 1 (3)
  • M10 X 1,25 (7)
  • M10 X 1,5 (21)
  • M10 X 1,50 (3)
  • M12 X 1 (3)
  • M12 X 1,25 (7)
  • M12 X 1,5 (6)
  • M12 X 1,75 (19)
  • M14 X 1 (3)
  • M14 X 1,25 (3)
  • M14 X 1,5 (7)
  • M14 X 2 (12)
  • M14 X 2,0 (1)
  • M16 X 1 (1)
  • M16 X 1,5 (9)
  • M16 X 2 (13)
  • M16 X 2,0 (3)
  • M18 X 1,5 (6)
  • M18 X 2 (3)
  • M18 X 2,5 (7)
  • M2 X 0,4 (7)
  • M2,5 X 0,45 (4)
  • M20 X 1,5 (3)
  • M20 X 2 (3)
  • M20 X 2,5 (8)
  • M22 X 1,5 (3)
  • M22 X 2 (3)
  • M22 X 2,5 (4)
  • M24 X 1,5 (3)
  • M24 X 2 (2)
  • M24 X 3 (4)
  • M27 X 1,5 (1)
  • M27 X 3 (3)
  • M3 X 0,5 (18)
  • M3,5 X 0,6 (4)
  • M30 X 1,5 (2)
  • M30 X 2 (1)
  • M30 X 3,5 (4)
  • M33 X 3,5 (3)
  • M36 X 4 (4)
  • M39 X 4 (1)
  • M4 X 0,5 (1)
  • M4 X 0,7 (17)
  • M42 X 4,5 (2)
  • M45 X 5 (1)
  • M48 X 5 (1)
  • M5 X 0,5 (1)
  • M5 X 0,8 (20)
  • M52 X 5 (1)
  • M6 X 0,5 (1)
  • M6 X 0,75 (3)
  • M6 X 1 (22)
  • M7 X 1 (7)
  • M8 X 0,75 (1)
  • M8 X 1 (7)
  • M8 X 1,0 (1)
  • M8 X 1,25 (24)
Thread Tolerance Class ANSI
Thread Tolerance Class ANSI
  • 2B (83)
  • 3B (18)
Thread Tolerance Class ISO
Thread Tolerance Class ISO
  • 6G-I (23)
  • 6H-I (226)
Tap PD Class
Tap PD Class
  • 0 (36)
  • 6G (8)
  • 6H (17)
  • D3 (7)
  • D4 (16)
  • D5 (26)
  • D6 (26)
  • D7 (10)
  • H2 (31)
  • H3 (162)
  • H4 (23)
  • H5 (66)
  • H6 (20)
  • H7 (29)
Tap Tolerance Class
Tap Tolerance Class
  • ISO 2 (225)
  • ISO 3 (24)
Number of Flutes
Number of Flutes
  • 2 (132)
  • 3 (522)
  • 4 (142)
  • 5 (12)
  • 6 (1)
application
Coating
Coating
  • Oxide (43)
  • TiN (13)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KSMN34 (28)
  • KSP32 (83)
  • KSP39 (565)
  • KSU30 (2)
  • KSU31 (131)
Tap Standard
Tap Standard
  • ANSI (416)
  • DIN 371 (122)
  • DIN 374 (91)
  • DIN 376 (129)
  • JIS (8)
frontEnd
Thread TPI
Thread TPI
  • 4.5 mm (1)
  • 5.0 mm (1)
  • 6.0 mm (3)
  • 7.0 mm (7)
  • 8.0 mm (7)
  • 9.0 mm (5)
  • 10.0 mm (10)
  • 11.0 mm (18)
  • 11.5 mm (2)
  • 12.0 mm (16)
  • 13.0 mm (18)
  • 14.0 mm (27)
  • 16.0 mm (29)
  • 18.0 mm (52)
  • 19.0 mm (4)
  • 20.0 mm (58)
  • 24.0 mm (61)
  • 27.0 mm (11)
  • 28.0 mm (29)
  • 32.0 mm (74)
  • 36.0 mm (2)
  • 40.0 mm (31)
  • 48.0 mm (5)
  • 56.0 mm (4)
Thread TPI Min to Thread TPI Max
Thread TPI
Thread TPI
  • 0.177 in (1)
  • 0.197 in (1)
  • 0.237 in (3)
  • 0.276 in (7)
  • 0.315 in (7)
  • 0.354 in (5)
  • 0.394 in (10)
  • 0.433 in (18)
  • 0.453 in (2)
  • 0.473 in (16)
  • 0.512 in (18)
  • 0.551 in (27)
  • 0.63 in (29)
  • 0.709 in (52)
  • 0.748 in (4)
  • 0.787 in (58)
  • 0.946 in (61)
  • 1.063 in (11)
  • 1.102 in (29)
  • 1.26 in (74)
  • 1.417 in (2)
  • 1.575 in (31)
  • 1.891 in (5)
  • 2.205 in (4)
Thread TPI Min to Thread TPI Max
Thread Pitch
Thread Pitch
  • 0.4 mm (7)
  • 0.45 mm (4)
  • 0.5 mm (21)
  • 0.601 mm (4)
  • 0.701 mm (17)
  • 0.75 mm (6)
  • 0.8 mm (20)
  • 1.0 mm (47)
  • 1.25 mm (41)
  • 1.5 mm (64)
  • 1.75 mm (19)
  • 2.0 mm (41)
  • 2.5 mm (19)
  • 3.0 mm (7)
  • 3.5 mm (7)
  • 4.0 mm (5)
  • 4.5 mm (2)
  • 5.0 mm (3)
Thread Pitch Min to Thread Pitch Max
Thread Pitch
Thread Pitch
  • 0.016 in (7)
  • 0.019 in (4)
  • 0.02 in (21)
  • 0.024 in (4)
  • 0.028 in (17)
  • 0.03 in (6)
  • 0.031 in (20)
  • 0.039 in (47)
  • 0.049 in (41)
  • 0.06 in (64)
  • 0.069 in (19)
  • 0.079 in (41)
  • 0.098 in (19)
  • 0.119 in (7)
  • 0.138 in (7)
  • 0.157 in (5)
  • 0.177 in (2)
  • 0.197 in (3)
Thread Pitch Min to Thread Pitch Max
Chamfer Form
Chamfer Form
  • FB (133)
  • PC (326)
  • PP (42)
  • SB (307)
  • TC (1)
backEnd
Back-End Diameter
Back-End Diameter
  • 2.801 mm (12)
  • 3.5 mm (16)
  • 3.575 mm (63)
  • 4.0 mm (8)
  • 4.275 mm (31)
  • 4.5 mm (26)
  • 4.926 mm (42)
  • 5.0 mm (1)
  • 5.5 mm (1)
  • 5.601 mm (3)
  • 6.0 mm (43)
  • 6.2 mm (1)
  • 6.476 mm (43)
  • 7.0 mm (32)
  • 7.95 mm (7)
  • 8.0 mm (25)
  • 8.076 mm (45)
  • 8.201 mm (22)
  • 8.5 mm (1)
  • 9.0 mm (29)
  • 9.326 mm (40)
  • 9.675 mm (41)
  • 10.0 mm (17)
  • 10.9 mm (17)
  • 11.0 mm (27)
  • 11.125 mm (4)
  • 12.0 mm (22)
  • 12.201 mm (38)
  • 13.775 mm (3)
  • 14.0 mm (16)
  • 14.3 mm (4)
  • 14.976 mm (14)
  • 16.0 mm (18)
  • 17.475 mm (4)
  • 17.675 mm (1)
  • 17.7 mm (3)
  • 17.776 mm (4)
  • 18.0 mm (28)
  • 20.0 mm (6)
  • 20.326 mm (6)
  • 22.0 mm (14)
  • 22.725 mm (2)
  • 22.75 mm (1)
  • 23.026 mm (3)
  • 25.0 mm (5)
  • 25.925 mm (1)
  • 28.0 mm (9)
  • 28.576 mm (2)
  • 32.0 mm (3)
  • 36.0 mm (3)
  • 40.0 mm (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.11 in (12)
  • 0.138 in (16)
  • 0.142 in (63)
  • 0.157 in (8)
  • 0.168 in (31)
  • 0.177 in (26)
  • 0.194 in (42)
  • 0.197 in (1)
  • 0.217 in (1)
  • 0.22 in (3)
  • 0.237 in (43)
  • 0.244 in (1)
  • 0.255 in (43)
  • 0.276 in (32)
  • 0.313 in (7)
  • 0.315 in (25)
  • 0.318 in (45)
  • 0.323 in (22)
  • 0.335 in (1)
  • 0.354 in (29)
  • 0.367 in (40)
  • 0.381 in (41)
  • 0.394 in (17)
  • 0.429 in (17)
  • 0.433 in (27)
  • 0.438 in (4)
  • 0.473 in (22)
  • 0.48 in (38)
  • 0.542 in (3)
  • 0.551 in (16)
  • 0.564 in (4)
  • 0.59 in (14)
  • 0.63 in (18)
  • 0.689 in (4)
  • 0.697 in (1)
  • 0.698 in (3)
  • 0.701 in (4)
  • 0.709 in (28)
  • 0.787 in (6)
  • 0.8 in (6)
  • 0.866 in (14)
  • 0.895 in (2)
  • 0.896 in (1)
  • 0.906 in (3)
  • 0.984 in (5)
  • 1.022 in (1)
  • 1.102 in (9)
  • 1.125 in (2)
  • 1.26 in (3)
  • 1.417 in (3)
  • 1.575 in (2)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Tarauds polyvalents

Tarauds HSS-E à goujures hélicoïdales T830 GOtap™ • Trous borgnes
(49 Products)
  • Taraudage : trou borgneTaraudage : trou borgne
  • 3861838618
  • Chanfrein Forme C (2–3)Chanfrein Forme C (2–3)
  • Angle d'hélice : 45°Angle d'hélice : 45°
  • DIN 371DIN 371
  • DIN 374DIN 374
  • DIN 376DIN 376
  • Arrosage externe : TaraudageArrosage externe : Taraudage
  • Classe de tolérance : 6HClasse de tolérance : 6H
  • Classe de tolérance : 6GClasse de tolérance : 6G
  • Spécifications fabricant : MSpécifications fabricant : M
  • Spécifications fabricant : MFSpécifications fabricant : MF
  • Manufacturer’s Specs: ISO 2Manufacturer’s Specs: ISO 2
  • Manufacturer’s Specs: ISO 3Manufacturer’s Specs: ISO 3
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Dimension Standard Thread Tolerance Class ISO
5417305 T830M080X125R6H-D6 T830M080X125R6H-D6 KSP39 M8 X 1,25 90.0000 3.540 15.0000 .5900 35.0000 1.380 6.0 .2362 3 DIN 376 6H-I  
    List price:
    $62.64 /each.
    Your price::
    5417308 T830M120X175R6H-D6 T830M120X175R6H-D6 KSP39 M12 X 1,75 110.0000 4.330 21.0000 .8300 44.0000 1.730 9.0 .3543 3 DIN 376 6H-I  
      List price:
      $106.46 /each.
      Your price::
      5417314 T830M140X200R6H-D6 T830M140X200R6H-D6 KSP39 M14 X 2 110.0000 4.330 24.0000 .9400 52.0000 2.050 11.0 .4331 3 DIN 376 6H-I  
        List price:
        $160.63 /each.
        Your price::
        5417334 T830M220X250R6H-D6 T830M220X250R6H-D6 KSP39   M22 X 2,5 140.0000 5.510 30.0000 1.180 70.0000 2.760 18.0 .7087 4 DIN 376 6H-I
          List price:
          $381.52 /each.
          Your price::
          5417311 T830MF120X150R6H-D4 T830MF120X150R6H-D4 KSP39 M12 X 1,5 100.0000 3.940 21.0000 .8300 39.0000 1.540 9.0 .3543 3 DIN 374 6H-I  
            List price:
            $106.46 /each.
            Your price::
            5417332 T830MF180X150R6H-D4 T830MF180X150R6H-D4 KSP39 M18 X 1,5 110.0000 4.330 21.0000 .8300 50.0000 1.970 14.0 .5512 4 DIN 374 6H-I  
              List price:
              $273.00 /each.
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor

              ORIGINAL PRODUCT

              Tarauds polyvalents

              Tarauds HSS-E à goujures hélicoïdales T832 GOtap™ • Trous borgnes
              (8 Products)
              • Taraudage : trou borgneTaraudage : trou borgne
              • 3861838618
              • Chanfrein Forme E (1,5-2)Chanfrein Forme E (1,5-2)
              • Angle d'hélice : 45°Angle d'hélice : 45°
              • DIN 371DIN 371
              • DIN 374DIN 374
              • DIN 376DIN 376
              • Arrosage externe : TaraudageArrosage externe : Taraudage
              • Classe de tolérance : 6HClasse de tolérance : 6H
              • Spécifications fabricant : MSpécifications fabricant : M
              • Spécifications fabricant : MFSpécifications fabricant : MF
              • Manufacturer’s Specs: ISO 2Manufacturer’s Specs: ISO 2
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Dimension Standard Thread Tolerance Class ISO
              5417385 T832M080X125R6H-D1 T832M080X125R6H-D1 KSP39 M8 X 1,25 90.0000 3.540 15.0000 .5900 35.0000 1.380 8.0 .315 3 DIN 371 6H-I  
                List price:
                $62.64 /each.
                Your price::
                5417398 T832M120X175R6H-D6 T832M120X175R6H-D6 KSP39 M12 X 1,75 110.0000 4.330 21.0000 .8300 44.0000 1.730 9.0 .3543 3 DIN 376 6H-I  
                  List price:
                  $106.46 /each.
                  Your price::
                  5417401 T832M140X200R6H-D6 T832M140X200R6H-D6 KSP32 M14 X 2 110.0000 4.330 24.0000 .9400 52.0000 2.050 11.0 .4331 3 DIN 376 6H-I  
                    List price:
                    $183.94 /each.
                    Your price::
                    5417405 T832M160X200R6H-D6 T832M160X200R6H-D6 KSP39 M16 X 2 110.0000 4.330 24.0000 .9940 51.0000 2.010 12.0 .4724 3 DIN 376 6H-I  
                      List price:
                      $188.58 /each.
                      Your price::
                      5417409 T832M200X250R6H-D6 T832M200X250R6H-D6 KSP39   M20 X 2,5 140.0000 5.510 30.0000 1.180 64.0000 2.520 16.0 .6299 4 DIN 376 6H-I
                        List price:
                        $357.36 /each.
                        Your price::
                        5417387 T832MF080X100R6H-D4 T832MF080X100R6H-D4 KSP32 M8 X 1 90.0000 3.540 15.0000 .5900 35.0000 1.380 6.0 .2362 3 DIN 374 6H-I  
                          List price:
                          $71.70 /each.
                          Your price::
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor

                          ORIGINAL PRODUCT

                          Tarauds hautes performances

                          Tarauds à entrée hélicoïdale HSS-E GOtap™ T820 • Trous débouchants
                          (132 Products)
                          • Taraudage : trou débouchantTaraudage : trou débouchant
                          • 3861838618
                          • Forme de chanfrein : Taraud moyen (3-5)Forme de chanfrein : Taraud moyen (3-5)
                          • Arrosage externe : TaraudageArrosage externe : Taraudage
                          • Spécifications fabricant : ANSISpécifications fabricant : ANSI
                          • Spécifications fabricant : UNCSpécifications fabricant : UNC
                          • Spécifications fabricant : UNFSpécifications fabricant : UNF
                          • Multipurpose Taps: Spiral PointMultipurpose Taps: Spiral Point
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Tap Pitch Diameter Limit
                          5455861 T820NC#08-32RH3-A T820NC#08-32RH3-A KSP39 8 - 32 53.8000 2.120 9.7000 .3800 19.3000 .7600 4.267 .168 2 H3  
                            List price:
                            $22.96 /each.
                            Your price::
                            5455869 T820NC#10-24RH3-A T820NC#10-24RH3-A KSP39   10 - 24 60.2000 2.370 12.7000 .5000 23.2000 .9100 4.928 .194 2 H3
                              List price:
                              $22.96 /each.
                              Your price::