Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Notifications

Mark all as read

Tarauds en carbure HP

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (29)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (29)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (29)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (29)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (29)
  • K Cast Iron (53)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (53)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (53)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (53)
  • N Non-Ferrous Materials (22)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (22)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (22)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (20)
  • H Hardened Materials (13)
    • H3
      Hardened Materials 56-60 HRC
      (13)
    • H4
      Hardened Materials >60 HRC
      (13)
Select First Choice
  • IN (10)
Applications
Applications
  • Tapping Blind Hole Tapping Blind Hole (72)
  • Tapping Through Hole Tapping Through Hole (47)
  • Threading Threading (117)
Cutting Length
Cutting Length
  • 6.0 mm (3)
  • 7.0 mm (6)
  • 8.0 mm (4)
  • 9.0 mm (2)
  • 10.0 mm (13)
  • 12.0 mm (11)
  • 13.0 mm (6)
  • 14.0 mm (3)
  • 15.0 mm (20)
  • 16.0 mm (4)
  • 17.0 mm (2)
  • 18.0 mm (11)
  • 19.0 mm (3)
  • 19.05 mm (1)
  • 20.0 mm (1)
  • 21.0 mm (9)
  • 22.0 mm (1)
  • 22.1 mm (1)
  • 23.875 mm (1)
  • 24.0 mm (13)
  • 28.0 mm (1)
  • 30.0 mm (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.237 in (3)
  • 0.276 in (6)
  • 0.315 in (4)
  • 0.354 in (2)
  • 0.394 in (13)
  • 0.473 in (11)
  • 0.512 in (6)
  • 0.551 in (3)
  • 0.591 in (20)
  • 0.63 in (4)
  • 0.669 in (2)
  • 0.709 in (11)
  • 0.748 in (3)
  • 0.75 in (1)
  • 0.787 in (1)
  • 0.828 in (9)
  • 0.866 in (1)
  • 0.87 in (1)
  • 0.941 in (1)
  • 0.946 in (13)
  • 1.102 in (1)
  • 1.181 in (1)
Cutting Length Min to Cutting Length Max
Type of Thread
Type of Thread
  • M-Metric/ISO (90)
  • UNC (23)
  • UNF (4)
Thread Size
Thread Size
  • 1/2 - 13 (4)
  • 1/4 - 20 (4)
  • 1/4 - 28 (2)
  • 10 - 24 (1)
  • 10 - 32 (1)
  • 3/8 - 16 (4)
  • 3/8 - 24 (1)
  • 5/16 - 18 (3)
  • 5/8 - 11 (1)
  • 6 - 32 (1)
  • 7/16 - 14 (3)
  • 8 - 32 (2)
  • M10 X 1 (6)
  • M10 X 1,25 (1)
  • M10 X 1,5 (12)
  • M12 X 1,25 (1)
  • M12 X 1,5 (4)
  • M12 X 1,75 (10)
  • M14 X 1,25 (1)
  • M14 X 1,5 (6)
  • M14 X 2 (5)
  • M16 X 1,5 (1)
  • M16 X 2 (4)
  • M20 X 2,5 (1)
  • M3 X 0,5 (1)
  • M4 X 0,7 (3)
  • M5 X 0,8 (5)
  • M6 X 1 (13)
  • M7 X 1 (1)
  • M8 X 1 (1)
  • M8 X 1,25 (13)
  • M9 X 1,25 (1)
Thread Tolerance Class ANSI
Thread Tolerance Class ANSI
  • 3BX (27)
Thread Tolerance Class ISO
Thread Tolerance Class ISO
  • 6HX-I (90)
Tap PD Class
Tap PD Class
  • 3B (9)
  • 6H (16)
Connection Style
Connection Style
  • Cylindrical with Drive Square (36)
  • Straight-Cylindrical (81)
Number of Flutes
Number of Flutes
  • 2 (10)
  • 3 (31)
  • 4 (65)
  • 5 (10)
  • 6 (1)
Internal Coolant Capability
Internal Coolant Capability
application
Coating
Coating
  • AlCrTiN (52)
  • CrC/C (15)
  • TiAlN (30)
  • TiN (7)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC7512 (7)
  • KC7542 (29)
  • KCK17 (53)
  • KCN14 (15)
  • KCU36 (13)
Tap Standard
Tap Standard
  • DIN 2174 (3)
  • DIN 371 (18)
  • DIN 374 (10)
  • DIN 376 (5)
frontEnd
Thread TPI
Thread TPI
  • 11.0 mm (1)
  • 13.0 mm (4)
  • 14.0 mm (3)
  • 16.0 mm (4)
  • 18.0 mm (3)
  • 20.0 mm (4)
  • 24.0 mm (2)
  • 28.0 mm (2)
  • 32.0 mm (4)
Thread TPI Min to Thread TPI Max
Thread TPI
Thread TPI
  • 0.433 in (1)
  • 0.512 in (4)
  • 0.551 in (3)
  • 0.63 in (4)
  • 0.709 in (3)
  • 0.787 in (4)
  • 0.946 in (2)
  • 1.102 in (2)
  • 1.26 in (4)
Thread TPI Min to Thread TPI Max
Thread Pitch
Thread Pitch
  • 0.5 mm (1)
  • 0.701 mm (3)
  • 0.8 mm (5)
  • 1.0 mm (21)
  • 1.25 mm (17)
  • 1.5 mm (23)
  • 1.75 mm (10)
  • 2.0 mm (9)
  • 2.5 mm (1)
Thread Pitch Min to Thread Pitch Max
Thread Pitch
Thread Pitch
  • 0.02 in (1)
  • 0.028 in (3)
  • 0.031 in (5)
  • 0.039 in (21)
  • 0.049 in (17)
  • 0.06 in (23)
  • 0.069 in (10)
  • 0.079 in (9)
  • 0.098 in (1)
Thread Pitch Min to Thread Pitch Max
Chamfer Form
Chamfer Form
  • FB (51)
  • PC (46)
  • SB (20)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (116)
Back-End Diameter
Back-End Diameter
  • 4.5 mm (2)
  • 6.0 mm (20)
  • 6.351 mm (11)
  • 7.0 mm (3)
  • 7.95 mm (3)
  • 8.0 mm (14)
  • 9.0 mm (4)
  • 9.525 mm (5)
  • 10.0 mm (17)
  • 11.0 mm (3)
  • 11.125 mm (3)
  • 12.0 mm (19)
  • 12.701 mm (4)
  • 14.0 mm (6)
  • 14.3 mm (1)
  • 16.0 mm (1)
  • 18.0 mm (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.177 in (2)
  • 0.237 in (20)
  • 0.25 in (11)
  • 0.276 in (3)
  • 0.313 in (3)
  • 0.315 in (14)
  • 0.354 in (4)
  • 0.375 in (5)
  • 0.394 in (17)
  • 0.433 in (3)
  • 0.438 in (3)
  • 0.473 in (19)
  • 0.5 in (4)
  • 0.551 in (6)
  • 0.564 in (1)
  • 0.63 in (1)
  • 0.709 in (1)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Tarauds Hautes Performances

Tarauds en carbure monobloc à goujures hélicoïdales Beyond™ • Trous borgnes
(8 Products)
  • Taraudage : trou borgneTaraudage : trou borgne
  • HMHM
  • Chanfrein Forme C (2–3)Chanfrein Forme C (2–3)
  • Angle d'hélice : 45°Angle d'hélice : 45°
  • Arrosage interne : axial : TaraudageArrosage interne : axial : Taraudage
  • Classe de tolérance : 6HXClasse de tolérance : 6HX
  • Spécifications fabricant : MSpécifications fabricant : M
  • Spécifications fabricant : MFSpécifications fabricant : MF
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Thread Tolerance Class ISO
3483057 T331M060X100R6HX T331M060X100R6HX KC7542 M6 X 1 70.0000 2.755 8.0000 .3150 24.0000 .9449 6.0 .2362 3 6HX-I  
    List price:
    $179.03 /each.
    Your price::
    3483058 T331M080X125R6HX T331M080X125R6HX KC7542 M8 X 1,25 80.0000 3.149 10.0000 .3937 32.0000 1.259 8.0 .315 3 6HX-I  
      List price:
      $199.78 /each.
      Your price::
      3483059 T331M100X150R6HX T331M100X150R6HX KC7542   M10 X 1,5 90.0000 3.543 12.0000 .4724 40.0000 1.574 10.0 .3937 4 6HX-I
        List price:
        $254.38 /each.
        Your price::
        3483061 T331M120X175R6HX T331M120X175R6HX KC7542 M12 X 1,75 100.0000 3.937 14.0000 .5512 48.0000 1.889 12.0 .4724 4 6HX-I  
          List price:
          $289.88 /each.
          Your price::
          3483073 T331M140X200R6HX T331M140X200R6HX KC7542 M14 X 2 110.0000 4.330 16.0000 .6299 56.0000 2.204 12.0 .4724 4 6HX-I  
            List price:
            $373.22 /each.
            Your price::
            3483062 T331MF120X150R6HX T331MF120X150R6HX KC7542 M12 X 1,5 100.0000 3.937 14.0000 .5512 48.0000 1.889 12.0 .4724 4 6HX-I  
              List price:
              $309.82 /each.
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor

              ORIGINAL PRODUCT

              Tarauds Hautes Performances

              Tarauds en carbure monobloc à goujures droites Beyond™ • Trous borgnes
              (11 Products)
              • Taraudage : trou borgneTaraudage : trou borgne
              • HMHM
              • Chanfrein Forme E (1,5-2)Chanfrein Forme E (1,5-2)
              • Angle d'hélice : 0°Angle d'hélice : 0°
              • Arrosage interne : axial : TaraudageArrosage interne : axial : Taraudage
              • Classe de tolérance : 6HXClasse de tolérance : 6HX
              • Spécifications fabricant : MSpécifications fabricant : M
              • Spécifications fabricant : MFSpécifications fabricant : MF
              • DIN 371DIN 371
              • DIN 374DIN 374
              • DIN 376DIN 376
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Dimension Standard Thread Tolerance Class ISO
              5520793 T351M060X100R6HX-D1 T351M060X100R6HX-D1 KCK17 M6 X 1 80.0000 3.150 10.0000 .3900 30.0000 1.181 6.0 .236 4 DIN 371 6HX-I  
                List price:
                $200.57 /each.
                Your price::
                5520794 T351M070X100R6HX-D1 T351M070X100R6HX-D1 KCK17 M7 X 1 80.0000 3.150 10.0000 .3900 30.0000 1.181 7.0 .276 4 DIN 371 6HX-I  
                  List price:
                  $235.80 /each.
                  Your price::
                  5520799 T351MF100X100R6HX-D4 T351MF100X100R6HX-D4 KCK17 M10 X 1 90.0000 3.540 10.0000 .3900 35.0000 1.380 7.0 .276 4 DIN 374 6HX-I  
                    List price:
                    $313.51 /each.
                    Your price::
                    5520800 T351MF100X125R6HX-D4 T351MF100X125R6HX-D4 KCK17   M10 X 1,25 100.0000 3.940 15.0000 .5900 39.0000 1.540 7.0 .276 4 DIN 374 6HX-I
                      List price:
                      $313.51 /each.
                      Your price::
                      5520802 T351MF120X125R6HX-D4 T351MF120X125R6HX-D4 KCK17 M12 X 1,25 100.0000 3.940 15.0000 .5900 39.0000 1.540 9.0 .354 4 DIN 374 6HX-I  
                        List price:
                        $357.24 /each.
                        Your price::
                        5520806 T351MF140X150R6HX-D4 T351MF140X150R6HX-D4 KCK17 M14 X 1,5 100.0000 3.937 15.0000 .5900 47.0000 1.850 11.0 .433 4 DIN 374 6HX-I  
                          List price:
                          $437.31 /each.
                          Your price::
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor

                          ORIGINAL PRODUCT

                          Tarauds Hautes Performances

                          Tarauds en carbure monobloc à goujures droites Beyond™ • Trous borgnes
                          (6 Products)
                          • Taraudage : trou borgneTaraudage : trou borgne
                          • HMHM
                          • Chanfrein Forme E (1,5-2)Chanfrein Forme E (1,5-2)
                          • Angle d'hélice : 0°Angle d'hélice : 0°
                          • Classe de tolérance : 3BXClasse de tolérance : 3BX
                          • Spécifications fabricant : UNCSpécifications fabricant : UNC
                          • Spécifications fabricant : UNFSpécifications fabricant : UNF
                          • Arrosage interne : axial : TaraudageArrosage interne : axial : Taraudage
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Thread Tolerance Class ANSI
                          5551056 T351NC02500-20R3BX T351NC02500-20R3BX KCK17 1/4 - 20 70.0000 2.760 15.0000 .5900 24.0000 .9500 6.35 .25 4 3BX  
                            List price:
                            $178.61 /each.
                            Your price::
                            5551057 T351NC03125-18R3BX T351NC03125-18R3BX KCK17 5/16 - 18 80.0000 3.150 17.0000 .6700 32.0000 1.260 7.938 .3125 4 3BX  
                              List price:
                              $198.05 /each.
                              Your price::
                              5551058 T351NC03750-16R3BX T351NC03750-16R3BX KCK17 3/8 - 16 90.0000 3.540 19.0000 .7500 40.0000 1.570 9.525 .375 4 3BX  
                                List price:
                                $259.28 /each.
                                Your price::
                                5551059 T351NC04375-14R3BX T351NC04375-14R3BX KCK17 7/16 - 14 100.0000 3.940 22.0000 .8700 44.0000 1.730 11.113 .4375 4 3BX  
                                  List price:
                                  $284.38 /each.
                                  Your price::
                                  5551060 T351NC05000-13R3BX T351NC05000-13R3BX KCK17 1/2 - 13 100.0000 3.940 24.0000 .9400 48.0000 1.890 12.7 .5 4 3BX  
                                    List price:
                                    $302.57 /each.
                                    Your price::
                                    5551061 T351NC06250-11R3BX T351NC06250-11R3BX KCK17   5/8 - 11 110.0000 4.330 28.0000 1.100 64.0000 2.520 14.288 .5625 5 3BX
                                      List price:
                                      $436.22 /each.
                                      Your price::
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor

                                      ORIGINAL PRODUCT

                                      Tarauds Hautes Performances

                                      Tarauds en carbure monobloc à goujures droites Beyond™ • Trous borgnes
                                      (11 Products)
                                      • Taraudage : trou borgneTaraudage : trou borgne
                                      • HMHM
                                      • Chanfrein Forme E (1,5-2)Chanfrein Forme E (1,5-2)
                                      • Angle d'hélice : 0°Angle d'hélice : 0°
                                      • Classe de tolérance : 6HXClasse de tolérance : 6HX
                                      • Spécifications fabricant : MSpécifications fabricant : M
                                      • Spécifications fabricant : MFSpécifications fabricant : MF
                                      • Arrosage interne : axial : TaraudageArrosage interne : axial : Taraudage
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Thread Tolerance Class ISO
                                      5551065 T351M060X100R6HX T351M060X100R6HX KCK17 M6 X 1 70.0000 2.760 12.0000 .4700 24.0000 .9500 6.0 .2362 4 6HX-I  
                                        List price:
                                        $182.34 /each.
                                        Your price::
                                        5551066 T351M080X125R6HX T351M080X125R6HX KCK17 M8 X 1,25 80.0000 3.150 15.0000 .5900 32.0000 1.260 8.0 .315 4 6HX-I  
                                          List price:
                                          $207.40 /each.
                                          Your price::
                                          5551068 T351M100X150R6HX T351M100X150R6HX KCK17 M10 X 1,5 90.0000 3.540 18.0000 .7100 40.0000 1.580 10.0 .3937 4 6HX-I  
                                            List price:
                                            $259.10 /each.
                                            Your price::
                                            5551070 T351M120X175R6HX T351M120X175R6HX KCK17   M12 X 1,75 100.0000 3.940 21.0000 .8300 48.0000 1.890 12.0 .4724 4 6HX-I
                                              List price:
                                              $295.25 /each.
                                              Your price::
                                              5551072 T351M140X200R6HX T351M140X200R6HX KCK17 M14 X 2 110.0000 4.330 24.0000 .9400 56.0000 2.210 12.0 .4724 4 6HX-I  
                                                List price:
                                                $397.56 /each.
                                                Your price::
                                                5551069 T351MF120X150R6HX T351MF120X150R6HX KCK17 M12 X 1,5 100.0000 3.940 21.0000 .8300 48.0000 1.890 12.0 .4724 4 6HX-I  
                                                  List price:
                                                  $315.57 /each.
                                                  Your price::
                                                  List price:
                                                  Discount: %
                                                  Your price::
                                                  Replacement This item is not available
                                                  Replacement Product This item may be available through a distributor

                                                  ORIGINAL PRODUCT

                                                  Tarauds Hautes Performances

                                                  Tarauds carbure monobloc à goujures hélicoïdales à gauche, coupe à droite Beyond™ • Trous débouchants
                                                  (4 Products)
                                                  • Taraudage : trou débouchantTaraudage : trou débouchant
                                                  • HMHM
                                                  • Chanfrein Forme D (3,5-5)Chanfrein Forme D (3,5-5)
                                                  • Angle d'hélice : L15°Angle d'hélice : L15°
                                                  • Arrosage externe : TaraudageArrosage externe : Taraudage
                                                  • Classe de tolérance : 6HXClasse de tolérance : 6HX
                                                  • Spécifications fabricant : MSpécifications fabricant : M
                                                  • Spécifications fabricant : MFSpécifications fabricant : MF
                                                  View Products
                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Thread Tolerance Class ISO
                                                  3031914 T320M060X100R6HX T320M060X100R6HX KC7542 M6 X 1 70.0000 2.755 12.0000 .4724 23.0000 .9055 6.0 .2362 3 6HX-I
                                                    List price:
                                                    $182.28 /each.
                                                    Your price::
                                                    3031915 T320M080X125R6HX T320M080X125R6HX KC7542 M8 X 1,25 80.0000 3.149 15.0000 .5906 28.0000 1.102 8.0 .315 3 6HX-I
                                                      List price:
                                                      $199.78 /each.
                                                      Your price::
                                                      3031916 T320M100X150R6HX T320M100X150R6HX KC7542 M10 X 1,5 90.0000 3.543 18.0000 .7087 33.0000 1.299 10.0 .3937 4 6HX-I
                                                        List price:
                                                        $254.38 /each.
                                                        Your price::
                                                        3031917 T320M120X175R6HX T320M120X175R6HX KC7542 M12 X 1,75 100.0000 3.937 21.0000 .8268 40.0000 1.574 12.0 .4724 4 6HX-I
                                                          List price:
                                                          $289.88 /each.
                                                          Your price::
                                                          List price:
                                                          Discount: %
                                                          Your price::
                                                          Replacement This item is not available
                                                          Replacement Product This item may be available through a distributor

                                                          ORIGINAL PRODUCT

                                                          Tarauds Hautes Performances

                                                          Tarauds carbure monobloc à goujures hélicoïdales à gauche, coupe à droite Beyond™ • Trous débouchants
                                                          (3 Products)
                                                          • Taraudage : trou débouchantTaraudage : trou débouchant
                                                          • HMHM
                                                          • Chanfrein Forme D (3,5-5)Chanfrein Forme D (3,5-5)
                                                          • Angle d'hélice : L15°Angle d'hélice : L15°
                                                          • Arrosage externe : TaraudageArrosage externe : Taraudage
                                                          • Classe de tolérance : 3BXClasse de tolérance : 3BX
                                                          • Spécifications fabricant : UNCSpécifications fabricant : UNC
                                                          View Products
                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Thread Tolerance Class ANSI
                                                          3031908 T320NC03750-16R3BX T320NC03750-16R3BX KC7542 3/8 - 16 90.0000 3.540 19.0500 .7500 33.0200 1.300 9.525 .375 4 3BX
                                                            List price:
                                                            $254.38 /each.
                                                            Your price::
                                                            3031910 T320NC04375-14R3BX T320NC04375-14R3BX KC7542 7/16 - 14 100.0760 3.940 22.0980 .8700 36.0680 1.420 11.113 .4375 4 3BX
                                                              List price:
                                                              $287.70 /each.
                                                              Your price::
                                                              3031911 T320NC05000-13R3BX T320NC05000-13R3BX KC7542 1/2 - 13 100.0760 3.940 23.8760 .9400 40.1320 1.580 12.7 .5 4 3BX
                                                                List price:
                                                                $302.57 /each.
                                                                Your price::
                                                                List price:
                                                                Discount: %
                                                                Your price::
                                                                Replacement This item is not available
                                                                Replacement Product This item may be available through a distributor

                                                                ORIGINAL PRODUCT

                                                                High-Performance Taps

                                                                Beyond™ Solid Carbide Forming Taps • Blind Holes
                                                                (2 Products)
                                                                View Products
                                                                SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Number of Lube Grooves Thread Tolerance Class ANSI
                                                                3483112 T391NC#6-32R3BX T391NC#6-32R3BX KC7542 6 - 32 60.0000 2.360 7.0000 .2800 14.0000 .5500 6.35 .25 4 2 3BX
                                                                  List price:
                                                                  $177.87 /each.
                                                                  Your price::
                                                                  3483113 T391NC#8-32R3BX T391NC#8-32R3BX KC7542 8 - 32 60.0000 2.360 7.0000 .2800 16.0000 .6300 6.35 .25 4 2 3BX
                                                                    List price:
                                                                    $177.87 /each.
                                                                    Your price::
                                                                    List price:
                                                                    Discount: %
                                                                    Your price::
                                                                    Replacement This item is not available
                                                                    Replacement Product This item may be available through a distributor

                                                                    ORIGINAL PRODUCT

                                                                    Tarauds hautes performances

                                                                    Tarauds carbure monobloc Beyond™ • Trous borgnes
                                                                    (1 Products)
                                                                    • Queue — Cylindrique ClassiqueQueue — Cylindrique Classique
                                                                    • Taraudage : trou borgneTaraudage : trou borgne
                                                                    • HMHM
                                                                    • Chanfrein Forme E (1,5-2)Chanfrein Forme E (1,5-2)
                                                                    • Angle d'hélice : 0°Angle d'hélice : 0°
                                                                    • Arrosage interne : axial : TaraudageArrosage interne : axial : Taraudage
                                                                    • Classe de tolérance : 6HXClasse de tolérance : 6HX
                                                                    • Spécifications fabricant : MSpécifications fabricant : M
                                                                    • Spécifications fabricant : MFSpécifications fabricant : MF
                                                                    View Products
                                                                    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Thread Tolerance Class ISO
                                                                    3632195 T351M200X250R6HX T351M200X250R6HX KCK17 M20 X 2,5 140.0000 5.511 30.0000 1.181 66.0000 2.598 18.0 .7087 5 6HX-I
                                                                      List price:
                                                                      $716.76 /each.
                                                                      Your price::
                                                                      List price:
                                                                      Discount: %
                                                                      Your price::
                                                                      Replacement This item is not available
                                                                      Replacement Product This item may be available through a distributor

                                                                      ORIGINAL PRODUCT

                                                                      Tarauds Hautes Performances

                                                                      Tarauds en carbure monobloc à goujures hélicoïdales Beyond™ • Trous borgnes
                                                                      (6 Products)
                                                                      • Taraudage : trou borgneTaraudage : trou borgne
                                                                      • HMHM
                                                                      • Chanfrein Forme C (2–3)Chanfrein Forme C (2–3)
                                                                      • Angle d'hélice : 45°Angle d'hélice : 45°
                                                                      • Arrosage interne : axial : TaraudageArrosage interne : axial : Taraudage
                                                                      • Classe de tolérance : 3BXClasse de tolérance : 3BX
                                                                      • Spécifications fabricant : UNFSpécifications fabricant : UNF
                                                                      • Spécifications fabricant : UNCSpécifications fabricant : UNC
                                                                      View Products
                                                                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Thread Tolerance Class ANSI
                                                                      3482959 T331NC2500-20R3BX T331NC2500-20R3BX KC7542 1/4 - 20 70.0000 2.755 10.0000 .3937 24.0000 .9449 6.35 .25 3 3BX
                                                                        List price:
                                                                        $180.66 /each.
                                                                        Your price::
                                                                        3482961 T331NC3125-18R3BX T331NC3125-18R3BX KC7542 5/16 - 18 80.0000 3.149 12.0000 .4724 32.0000 1.259 7.938 .3125 3 3BX
                                                                          List price:
                                                                          $201.89 /each.
                                                                          Your price::
                                                                          3482962 T331NC3750-16R3BX T331NC3750-16R3BX KC7542 3/8 - 16 90.0000 3.543 13.0000 .5118 40.0000 1.574 9.525 .375 4 3BX
                                                                            List price:
                                                                            $257.31 /each.
                                                                            Your price::
                                                                            3483053 T331NC4375-14R3BX T331NC4375-14R3BX KC7542 7/16 - 14 100.0000 3.937 15.0000 .5906 44.0000 1.732 11.113 .4375 4 3BX
                                                                              List price:
                                                                              $287.70 /each.
                                                                              Your price::
                                                                              3483054 T331NC5000-13R3BX T331NC5000-13R3BX KC7542 1/2 - 13 100.0000 3.937 16.0000 .6299 48.0000 1.889 12.7 .5 4 3BX
                                                                                List price:
                                                                                $289.31 /each.
                                                                                Your price::
                                                                                3482960 T331NF2500-28R3BX T331NF2500-28R3BX KC7542 1/4 - 28 70.0000 2.755 10.0000 .3937 24.0000 .9449 6.35 .25 3 3BX
                                                                                  List price:
                                                                                  $180.50 /each.
                                                                                  Your price::
                                                                                  List price:
                                                                                  Discount: %
                                                                                  Your price::
                                                                                  Replacement This item is not available
                                                                                  Replacement Product This item may be available through a distributor

                                                                                  ORIGINAL PRODUCT

                                                                                  Tarauds hautes performances

                                                                                  Tarauds à refouler carbure monobloc Beyond™ • Trous borgnes
                                                                                  (2 Products)
                                                                                  • Queue — Cylindrique ClassiqueQueue — Cylindrique Classique
                                                                                  • Taraudage : trou borgneTaraudage : trou borgne
                                                                                  • HMHM
                                                                                  • Chanfrein Forme E (1,5-2)Chanfrein Forme E (1,5-2)
                                                                                  • Arrosage interne : axial : TaraudageArrosage interne : axial : Taraudage
                                                                                  • Classe de tolérance : 6HXClasse de tolérance : 6HX
                                                                                  • Spécifications fabricant : MSpécifications fabricant : M
                                                                                  • Spécifications fabricant : MFSpécifications fabricant : MF
                                                                                  View Products
                                                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Number of Lube Grooves Thread Tolerance Class ISO
                                                                                  3527473 T491M040X070R6HX T491M040X070R6HX KC7512 M4 X 0,7 60.0000 2.362 6.0000 .2362 16.0000 .6299 6.0 .2362 4 2 6HX-I
                                                                                    List price:
                                                                                    $174.68 /each.
                                                                                    Your price::
                                                                                    3527478 T491MF100X100R6H T491MF100X100R6H KC7512 M10 X 1 90.0000 3.543 12.0000 .4724 40.0000 1.574 10.0 .3937 6 3 6HX-I
                                                                                      List price:
                                                                                      $270.52 /each.
                                                                                      Your price::
                                                                                      List price:
                                                                                      Discount: %
                                                                                      Your price::
                                                                                      Replacement This item is not available
                                                                                      Replacement Product This item may be available through a distributor

                                                                                      ORIGINAL PRODUCT

                                                                                      Tarauds hautes performances

                                                                                      Tarauds carbure monobloc goujures droites Beyond™ • Trous débouchants
                                                                                      (2 Products)
                                                                                      • Queue — Cylindrique ClassiqueQueue — Cylindrique Classique
                                                                                      • Taraudage : trou débouchantTaraudage : trou débouchant
                                                                                      • HMHM
                                                                                      • Chanfrein Forme D (3,5-5)Chanfrein Forme D (3,5-5)
                                                                                      • Angle d'hélice : 0°Angle d'hélice : 0°
                                                                                      • Tapping: Through CoolantTapping: Through Coolant
                                                                                      • Classe de tolérance : 6HXClasse de tolérance : 6HX
                                                                                      • Spécifications fabricant : MSpécifications fabricant : M
                                                                                      • Spécifications fabricant : MFSpécifications fabricant : MF
                                                                                      View Products
                                                                                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Thread Tolerance Class ISO
                                                                                      3527417 T461M060X100R6HX T461M060X100R6HX KC7512 M6 X 1 70.0000 2.755 12.0000 .4724 24.0000 .9449 6.0 .2362 3 6HX-I
                                                                                        List price:
                                                                                        $185.65 /each.
                                                                                        Your price::