successfully added to cart
View Cart

Notifications

Mark all as read

KM4X100™

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (50)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (50)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (50)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (50)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (50)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (50)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (50)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (50)
  • M Stainless Steel (48)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (48)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (48)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (48)
  • K Cast Iron (50)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (50)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (50)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (50)
  • N Non-Ferrous Materials (41)
    • N1
      Wrought Aluminum
      (37)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (37)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (11)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (41)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (37)
    • N6
      Carbon, Graphite Composites, CFRP
      (34)
    • N7
      MMC's
      (35)
  • S High-Temp Alloys (48)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (48)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (48)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (48)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (48)
  • H Hardened Materials (31)
    • H1
      Hardened Materials 44-48 HRC
      (31)
    • H2
      Hardened Materials 48-55 HRC
      (29)
    • H3
      Hardened Materials 56-60 HRC
      (29)
    • H4
      Hardened Materials >60 HRC
      (24)
Applications
Applications
  • Chamfer Turning Chamfer Turning (13)
  • Deep Grooving Deep Grooving (8)
  • Facing Facing (43)
  • Grooving Grooving (8)
  • ID Facing ID Facing (25)
  • ID Grooving ID Grooving (8)
  • ID Thread Turning ID Thread Turning (8)
  • Multiple Direction Cutting Multiple Direction Cutting (44)
  • OD Thread Turning OD Thread Turning (8)
  • Plunge Turning Plunge Turning (11)
  • Profiling Profiling (30)
  • TRN Boring TRN Boring (33)
  • Turning Turning (44)
Type of Thread
Type of Thread
  • 60 (4)
  • ACME (6)
  • API (4)
  • API RD (4)
  • BSW (2)
  • BUTTRESS (4)
  • M (2)
  • NPT (2)
  • STUB ACME (2)
  • UN (4)
  • UNJ (2)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (48)
  • Interrupted (22)
  • Lightly Interrupted Cut (48)
  • Smooth Cut (48)
  • Varying Depth of Cut (48)
Connection Style
Connection Style
  • KM (19)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (23)
  • 2.0 (38)
  • 3.0 (2)
  • 4.0 (31)
  • 6.0 (2)
  • 8.0 (27)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.051 in (1)
  • 0.057 in (1)
  • 0.066 in (2)
  • 0.076 in (4)
  • 0.08 in (2)
  • 0.094 in (2)
  • 0.097 in (1)
  • 0.1 in (6)
  • 0.102 in (8)
  • 0.116 in (1)
  • 0.117 in (1)
  • 0.127 in (2)
  • 0.131 in (2)
  • 0.132 in (2)
  • 0.133 in (2)
  • 0.15 in (2)
  • 0.152 in (2)
  • 0.157 in (2)
  • 0.16 in (2)
  • 0.165 in (4)
  • 0.173 in (2)
  • 0.178 in (2)
  • 0.19 in (4)
  • 0.191 in (4)
  • 0.198 in (2)
  • 0.2 in (6)
  • 0.202 in (2)
  • 0.203 in (4)
  • 0.224 in (2)
  • 0.235 in (2)
  • 0.244 in (1)
  • 0.25 in (2)
  • 0.251 in (2)
  • 0.254 in (4)
  • 0.269 in (2)
  • 0.282 in (2)
  • 0.284 in (2)
  • 0.3 in (2)
  • 0.315 in (3)
  • 0.318 in (6)
  • 0.33 in (2)
  • 0.34 in (6)
  • 0.343 in (2)
  • 0.356 in (2)
  • 0.397 in (8)
  • 0.4 in (12)
  • 0.404 in (2)
  • 0.406 in (4)
  • 0.43 in (2)
  • 0.445 in (4)
  • 0.472 in (1)
  • 0.49 in (2)
  • 0.508 in (2)
  • 0.565 in (1)
  • 0.57 in (1)
  • 0.572 in (6)
  • 0.575 in (3)
  • 0.787 in (2)
  • 0.792 in (6)
  • 0.794 in (10)
  • 0.8 in (26)
  • 0.826 in (4)
  • 0.902 in (4)
  • 1.0 in (2)
  • 1.188 in (4)
  • 1.19 in (2)
  • 1.191 in (18)
  • 1.194 in (2)
  • 1.195 in (1)
  • 1.2 in (26)
  • 1.25 in (2)
  • 1.5 in (2)
  • 1.585 in (2)
  • 1.587 in (2)
  • 1.588 in (24)
  • 1.59 in (1)
  • 1.6 in (31)
  • 1.75 in (2)
  • 1.98 in (1)
  • 1.981 in (2)
  • 2.0 in (4)
  • 2.25 in (4)
  • 2.38 in (4)
  • 2.381 in (7)
  • 2.388 in (4)
  • 2.39 in (1)
  • 2.4 in (25)
  • 2.5 in (2)
  • 3.175 in (2)
  • 3.18 in (1)
  • 3.2 in (13)
  • 4.0 in (4)
  • 6.35 in (2)
  • 9.525 in (2)
  • 10.0 in (1)
  • 12.5 in (1)
  • 12.7 in (2)
  • 16.0 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.051 mm (1)
  • 0.057 mm (1)
  • 0.066 mm (2)
  • 0.076 mm (4)
  • 0.08 mm (2)
  • 0.094 mm (2)
  • 0.097 mm (1)
  • 0.1 mm (6)
  • 0.102 mm (8)
  • 0.116 mm (1)
  • 0.117 mm (1)
  • 0.127 mm (2)
  • 0.131 mm (2)
  • 0.132 mm (2)
  • 0.133 mm (2)
  • 0.15 mm (2)
  • 0.152 mm (2)
  • 0.157 mm (2)
  • 0.16 mm (2)
  • 0.165 mm (4)
  • 0.173 mm (2)
  • 0.178 mm (2)
  • 0.19 mm (4)
  • 0.191 mm (4)
  • 0.198 mm (2)
  • 0.2 mm (6)
  • 0.202 mm (2)
  • 0.203 mm (4)
  • 0.224 mm (2)
  • 0.235 mm (2)
  • 0.244 mm (1)
  • 0.25 mm (2)
  • 0.251 mm (2)
  • 0.254 mm (4)
  • 0.269 mm (2)
  • 0.282 mm (2)
  • 0.284 mm (2)
  • 0.3 mm (2)
  • 0.315 mm (3)
  • 0.318 mm (6)
  • 0.33 mm (2)
  • 0.34 mm (6)
  • 0.343 mm (2)
  • 0.356 mm (2)
  • 0.397 mm (8)
  • 0.4 mm (12)
  • 0.404 mm (2)
  • 0.406 mm (4)
  • 0.43 mm (2)
  • 0.445 mm (4)
  • 0.472 mm (1)
  • 0.49 mm (2)
  • 0.508 mm (2)
  • 0.565 mm (1)
  • 0.57 mm (1)
  • 0.572 mm (6)
  • 0.575 mm (3)
  • 0.787 mm (2)
  • 0.792 mm (6)
  • 0.794 mm (10)
  • 0.8 mm (26)
  • 0.826 mm (4)
  • 0.902 mm (4)
  • 1.0 mm (2)
  • 1.188 mm (4)
  • 1.19 mm (2)
  • 1.191 mm (18)
  • 1.194 mm (2)
  • 1.195 mm (1)
  • 1.2 mm (26)
  • 1.25 mm (2)
  • 1.5 mm (2)
  • 1.585 mm (2)
  • 1.587 mm (2)
  • 1.588 mm (24)
  • 1.59 mm (1)
  • 1.6 mm (31)
  • 1.75 mm (2)
  • 1.98 mm (1)
  • 1.981 mm (2)
  • 2.0 mm (4)
  • 2.25 mm (4)
  • 2.38 mm (4)
  • 2.381 mm (7)
  • 2.388 mm (4)
  • 2.39 mm (1)
  • 2.4 mm (25)
  • 2.5 mm (2)
  • 3.175 mm (2)
  • 3.18 mm (1)
  • 3.2 mm (13)
  • 4.0 mm (4)
  • 6.35 mm (2)
  • 9.525 mm (2)
  • 10.0 mm (1)
  • 12.5 mm (1)
  • 12.7 mm (2)
  • 16.0 mm (1)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (20)
  • 241 (2)
  • CG4 (1)
  • CL4 (19)
  • CM2 (16)
  • CM3 (19)
  • CM4 (6)
  • CM5 (1)
  • CPX (23)
  • CW2 (6)
  • CW2015 (20)
  • CW5025 (20)
  • GX (15)
  • HK1500 (14)
  • HT2 (6)
  • HTX (2)
  • K060 (2)
  • K090 (30)
  • K1 (17)
  • K10M (24)
  • K10P (22)
  • K10U (8)
  • K15U (8)
  • K20K (26)
  • K21 (14)
  • K25M (12)
  • K25P (22)
  • K2885 (2)
  • K313 (33)
  • K35P (12)
  • K420 (35)
  • K45 (4)
  • K4H (2)
  • K68 (41)
  • KB1340 (2)
  • KB1345 (6)
  • KB1610 (4)
  • KB1625 (4)
  • KB1630 (8)
  • KB5610 (4)
  • KB5625 (6)
  • KB5630 (4)
  • KB9610 (8)
  • KB9640 (4)
  • KBH10 (8)
  • KBH10B (8)
  • KBH20 (8)
  • KBH20B (8)
  • KBK35 (2)
  • KC210 (18)
  • KC250 (22)
  • KC5010 (44)
  • KC5025 (34)
  • KC5410 (30)
  • KC5510 (26)
  • KC5525 (8)
  • KC710 (8)
  • KC720 (16)
  • KC722 (6)
  • KC730 (29)
  • KC7310 (24)
  • KC732 (10)
  • KC8050 (40)
  • KC810 (36)
  • KC850 (48)
  • KC9010 (25)
  • KC9025 (37)
  • KC910 (32)
  • KC9105 (20)
  • KC9110 (45)
  • KC9120 (39)
  • KC9125 (41)
  • KC9125RR (4)
  • KC9140 (39)
  • KC9145 (35)
  • KC9210 (4)
  • KC9215 (24)
  • KC9225 (26)
  • KC9240 (35)
  • KC9240NEW (31)
  • KC9245 (26)
  • KC9315 (33)
  • KC9320 (30)
  • KC9325 (32)
  • KC935 (38)
  • KC950 (37)
  • KC990 (33)
  • KCK05 (26)
  • KCK05B (24)
  • KCK15 (28)
  • KCK15B (29)
  • KCK20 (33)
  • KCK20B (37)
  • KCM15 (26)
  • KCM15B (22)
  • KCM25 (30)
  • KCM25B (29)
  • KCM35 (26)
  • KCM35B (22)
  • KCP05 (12)
  • KCP05B (11)
  • KCP10 (41)
  • KCP10B (36)
  • KCP25 (41)
  • KCP25B (43)
  • KCP30 (40)
  • KCP30B (31)
  • KCP40 (35)
  • KCP40B (35)
  • KCPK05 (25)
  • KCS10 (3)
  • KCS10B (26)
  • KCU10 (44)
  • KCU25 (34)
  • KD050 (5)
  • KD081 (6)
  • KD100 (7)
  • KD120 (8)
  • KD1400 (4)
  • KD1405 (4)
  • KD1425 (6)
  • KM1 (7)
  • KMF (2)
  • KT1120 (4)
  • KT125 (8)
  • KT150 (4)
  • KT175 (10)
  • KT315 (12)
  • KT325 (6)
  • KT5020 (2)
  • KU10T (12)
  • KU25T (4)
  • KU30T (32)
  • KY1310 (6)
  • KY1320 (20)
  • KY1540 (10)
  • KY1615 (25)
  • KY2000 (14)
  • KY2100 (2)
  • KY3000 (30)
  • KY3400 (18)
  • KY3500 (24)
  • KY4000 (8)
  • KY4300 (14)
  • KY4400 (22)
  • KYHK15B (22)
  • KYK10 (2)
  • KYK25 (14)
  • KYK35 (24)
  • KYS25 (10)
  • KYS30 (10)
  • MC2 (1)
  • NL200 (6)
  • NL250 (26)
  • NL300 (32)
  • NL400 (17)
  • NL920 (13)
  • P25 (2)
  • PB100 (2)
  • PB170 (2)
  • PB250 (2)
  • PB300 (2)
  • PS5 (6)
  • SP0819 (22)
  • SP3019 (18)
  • SP4019 (14)
  • SP4036 (2)
  • SP4093 (2)
  • SPADAP (19)
  • SPN4W2 (4)
  • THM (16)
  • THM-X (6)
  • THMF-X (2)
  • TN10P (27)
  • TN10U (8)
  • TN15M (24)
  • TN15U (8)
  • TN2000 (18)
  • TN20K (28)
  • TN20P (30)
  • TN30M (24)
  • TN30P (28)
  • TN4000 (18)
  • TN5015 (22)
  • TN5020 (22)
  • TN5105 (6)
  • TN5120 (22)
  • TN6010 (12)
  • TN6025 (13)
  • TN7005 (6)
  • TN7010 (22)
  • TN7015 (31)
  • TN7025 (31)
  • TN7035 (24)
  • TN7105 (6)
  • TN7110 (22)
  • TN7115 (29)
  • TN7125 (31)
  • TN7135 (24)
  • TN8025 (29)
  • TTI15 (6)
  • TTM09 (4)
  • TTR (2)
  • TTR-X (4)
  • TTS (18)
  • TTX (6)
  • W00342 (6)
  • WBH10C (8)
  • WBH10P (4)
  • WBH10U (4)
  • WBH20P (8)
  • WBH25P (4)
  • WBH25U (6)
  • WBH30P (4)
  • WBK40U (2)
  • WBK45U (6)
  • WDN00U (2)
  • WDN25U (4)
  • WK05CT (26)
  • WK15CT (6)
  • WK20CT (30)
  • WM15CT (26)
  • WM25CT (29)
  • WM35CT (26)
  • WP05CT (2)
  • WP15CT (37)
  • WP25CT (37)
  • WP35CT (37)
  • WS10PT (24)
  • WS25PT (26)
  • WU10HT (23)
  • WU10PT (10)
  • WU25PT (9)
  • X00511 (2)
Hand Of Tool
Hand Of Tool
  • L (7)
  • N (5)
  • R (7)
Wiper Insert
Wiper Insert
  • N (50)
  • Y (12)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 120.0 mm (33)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 4.724 in (33)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 in (7)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (7)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (3)
  • S (16)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (14)
  • NEGATIVE-ZERO (2)
Maximum Bore Depth
Maximum Bore Depth
  • 3.938 in (33)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 100.0 mm (33)
Maximum Bore Depth Min to Maximum Bore Depth Max
frontEnd
Adapter Front-End
Adapter Front-End
  • BOEING TAPER FLANGE (1)
  • CARTRIDGE MOUNT (4)
  • END MILL ADAPTER (22)
  • ER COLLET CHUCK (7)
  • FM ADAPTER (1)
  • HTS MODULAR ADAPTER (2)
  • HYDRAULIC CHUCK (27)
  • HYDRAULIC CHUCK-HIGH TORQUE (5)
  • HYDRAULIC CHUCK-SLIM LINE (8)
  • KM MODULAR ADAPTER (15)
  • SHELL MILL ADAPTER (76)
  • SHRINK FIT ADAPTER (38)
  • SQUARE SHANK ADAPTER (9)
  • TUNABLE SHELL MILL ADAPTER (6)
  • WHISTLE NOTCH ADAPTER (15)
Clamp Style
Clamp Style
  • D (8)
  • M (29)
  • N (8)
  • P (4)
  • X (3)
Cutting Width
Cutting Width
  • 1.0 in (2)
  • 1.19 in (1)
  • 1.194 in (2)
  • 1.2 in (2)
  • 1.5 in (2)
  • 1.57 in (2)
  • 1.575 in (2)
  • 1.75 in (2)
  • 1.829 in (2)
  • 1.981 in (2)
  • 2.0 in (2)
  • 2.2 in (2)
  • 2.235 in (2)
  • 2.24 in (1)
  • 2.25 in (1)
  • 2.388 in (2)
  • 2.39 in (1)
  • 2.464 in (2)
  • 2.5 in (2)
  • 2.667 in (2)
  • 2.743 in (2)
  • 2.75 in (2)
  • 2.794 in (2)
  • 2.997 in (2)
  • 3.0 in (4)
  • 3.099 in (2)
  • 3.17 in (2)
  • 3.175 in (4)
  • 3.18 in (1)
  • 3.2 in (4)
  • 3.25 in (2)
  • 3.251 in (2)
  • 3.32 in (1)
  • 3.329 in (1)
  • 3.5 in (4)
  • 3.607 in (2)
  • 3.96 in (2)
  • 3.962 in (2)
  • 3.974 in (1)
  • 3.988 in (2)
  • 4.0 in (4)
  • 4.242 in (4)
  • 4.25 in (2)
  • 4.3 in (2)
  • 4.5 in (4)
  • 4.521 in (2)
  • 4.6 in (1)
  • 4.699 in (3)
  • 4.775 in (4)
  • 4.78 in (1)
  • 4.785 in (1)
  • 4.788 in (1)
  • 4.8 in (2)
  • 4.801 in (4)
  • 4.81 in (2)
  • 4.88 in (1)
  • 4.9 in (1)
  • 4.95 in (2)
  • 5.0 in (2)
  • 5.004 in (4)
  • 5.131 in (2)
  • 5.41 in (2)
  • 5.5 in (2)
  • 5.537 in (2)
  • 5.563 in (2)
  • 6.0 in (4)
  • 6.35 in (6)
  • 6.36 in (1)
  • 6.48 in (2)
  • 7.01 in (2)
  • 7.137 in (4)
  • 7.925 in (4)
  • 8.001 in (1)
  • 8.738 in (2)
  • 8.992 in (2)
  • 9.525 in (4)
  • 9.65 in (2)
  • 9.73 in (2)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.0 mm (2)
  • 1.19 mm (1)
  • 1.194 mm (2)
  • 1.2 mm (2)
  • 1.5 mm (2)
  • 1.57 mm (2)
  • 1.575 mm (2)
  • 1.75 mm (2)
  • 1.829 mm (2)
  • 1.981 mm (2)
  • 2.0 mm (2)
  • 2.2 mm (2)
  • 2.235 mm (2)
  • 2.24 mm (1)
  • 2.25 mm (1)
  • 2.388 mm (2)
  • 2.39 mm (1)
  • 2.464 mm (2)
  • 2.5 mm (2)
  • 2.667 mm (2)
  • 2.743 mm (2)
  • 2.75 mm (2)
  • 2.794 mm (2)
  • 2.997 mm (2)
  • 3.0 mm (4)
  • 3.099 mm (2)
  • 3.17 mm (2)
  • 3.175 mm (4)
  • 3.18 mm (1)
  • 3.2 mm (4)
  • 3.25 mm (2)
  • 3.251 mm (2)
  • 3.32 mm (1)
  • 3.329 mm (1)
  • 3.5 mm (4)
  • 3.607 mm (2)
  • 3.96 mm (2)
  • 3.962 mm (2)
  • 3.974 mm (1)
  • 3.988 mm (2)
  • 4.0 mm (4)
  • 4.242 mm (4)
  • 4.25 mm (2)
  • 4.3 mm (2)
  • 4.5 mm (4)
  • 4.521 mm (2)
  • 4.6 mm (1)
  • 4.699 mm (3)
  • 4.775 mm (4)
  • 4.78 mm (1)
  • 4.785 mm (1)
  • 4.788 mm (1)
  • 4.8 mm (2)
  • 4.801 mm (4)
  • 4.81 mm (2)
  • 4.88 mm (1)
  • 4.9 mm (1)
  • 4.95 mm (2)
  • 5.0 mm (2)
  • 5.004 mm (4)
  • 5.131 mm (2)
  • 5.41 mm (2)
  • 5.5 mm (2)
  • 5.537 mm (2)
  • 5.563 mm (2)
  • 6.0 mm (4)
  • 6.35 mm (6)
  • 6.36 mm (1)
  • 6.48 mm (2)
  • 7.01 mm (2)
  • 7.137 mm (4)
  • 7.925 mm (4)
  • 8.001 mm (1)
  • 8.738 mm (2)
  • 8.992 mm (2)
  • 9.525 mm (4)
  • 9.65 mm (2)
  • 9.73 mm (2)
Cutting Width Min to Cutting Width Max