successfully added to cart
View Cart

Notifications

Mark all as read

Tournage

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (11215)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (11189)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (11189)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (11189)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (11190)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (11190)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (11214)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (11214)
  • M Stainless Steel (9325)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (9325)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (9325)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (9325)
  • K Cast Iron (9584)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (9548)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (9501)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (9181)
  • N Non-Ferrous Materials (7012)
    • N1
      Wrought Aluminum
      (6682)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (6549)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2434)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (6993)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (6616)
    • N6
      Carbon, Graphite Composites, CFRP
      (6121)
    • N7
      MMC's
      (3484)
  • S High-Temp Alloys (9632)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (9419)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (9614)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (9432)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (8700)
  • H Hardened Materials (5672)
    • H1
      Hardened Materials 44-48 HRC
      (5672)
    • H2
      Hardened Materials 48-55 HRC
      (5363)
    • H3
      Hardened Materials 56-60 HRC
      (3699)
    • H4
      Hardened Materials >60 HRC
      (2831)
Select First Choice
  • BR (219)
  • CN (1356)
  • DE (1427)
  • GB (864)
  • IN (571)
  • SG (628)
  • US (1587)
Applications
Applications
  • Back Boring Back Boring (230)
  • Boring Boring (1467)
  • CRT Profiling CRT Profiling (81)
  • Chamfer Turning Chamfer Turning (175)
  • Cut-Off Cut-Off (1171)
  • Deep Grooving Deep Grooving (90)
  • Drilling Drilling (1)
  • Face Grooving Face Grooving (3193)
  • Facing Facing (1830)
  • Grooving Grooving (3492)
  • ID Facing ID Facing (499)
  • ID Grooving ID Grooving (2399)
  • ID Thread Turning ID Thread Turning (324)
  • Multiple Direction Cutting Multiple Direction Cutting (3076)
  • OD Thread Turning OD Thread Turning (129)
  • Plunge Turning Plunge Turning (2344)
  • Profiling Profiling (2418)
  • TRN Boring TRN Boring (1421)
  • Threading Threading (131)
  • Turning Turning (3602)
Cutting Length
Cutting Length
  • 26.0 mm (1)
  • 32.0 mm (3)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 1.024 in (1)
  • 1.26 in (3)
Cutting Length Min to Cutting Length Max
Type of Thread
Type of Thread
  • 55 (6)
  • 60 (204)
  • ACME (139)
  • API (127)
  • API BUTTRESS (2)
  • API RD (99)
  • BSPT (4)
  • BSW (92)
  • BUTTRESS (192)
  • M (128)
  • NPT (90)
  • NPTF (4)
  • RD DIN 405 (6)
  • STUB ACME (92)
  • TR DIN 103 (6)
  • UN (196)
  • UNJ (90)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (7437)
  • Interrupted (1589)
  • Lightly Interrupted Cut (8657)
  • Smooth Cut (11152)
  • Stable (4)
  • Unstable (4)
  • Varying Depth of Cut (8925)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (240)
  • 48.0 (8)
  • 49.783 (2)
  • 50.0 (24)
  • 60.0 (34)
  • 62.5 (42)
  • 63.0 (19)
  • 72.5 (27)
  • 75.0 (362)
  • 85.0 (14)
  • 90.0 (2069)
  • 90.25 (10)
  • 91.0 (7)
  • 92.0 (4)
  • 92.25 (26)
  • 93.0 (802)
  • 95.0 (1128)
  • 97.0 (8)
  • 97.5 (1)
  • 100.0 (1)
  • 105.0 (1)
  • 107.5 (149)
  • 117.5 (22)
  • 140.0 (4)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Bolt-On Head (214)
  • Boring Bar Shank (1078)
  • Cutoff Support Blade A1-A3 (80)
  • KM (496)
  • PSC (8)
  • Toolholder (2273)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (5)
  • 1.0 (4379)
  • 2.0 (6115)
  • 3.0 (1256)
  • 4.0 (3651)
  • 6.0 (1095)
  • 8.0 (2165)
  • 16.0 (2)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 in (110)
  • 0.001 in (156)
  • 0.002 in (637)
  • 0.003 in (206)
  • 0.004 in (2297)
  • 0.005 in (163)
  • 0.006 in (184)
  • 0.007 in (347)
  • 0.008 in (4431)
  • 0.01 in (188)
  • 0.011 in (86)
  • 0.012 in (495)
  • 0.014 in (373)
  • 0.015 in (127)
  • 0.016 in (5594)
  • 0.017 in (88)
  • 0.019 in (124)
  • 0.02 in (316)
  • 0.021 in (1)
  • 0.023 in (327)
  • 0.024 in (122)
  • 0.027 in (1)
  • 0.028 in (28)
  • 0.03 in (70)
  • 0.031 in (6492)
  • 0.033 in (14)
  • 0.034 in (52)
  • 0.035 in (124)
  • 0.037 in (2)
  • 0.039 in (432)
  • 0.041 in (172)
  • 0.046 in (30)
  • 0.047 in (4068)
  • 0.048 in (18)
  • 0.049 in (155)
  • 0.06 in (483)
  • 0.061 in (233)
  • 0.062 in (460)
  • 0.063 in (2839)
  • 0.065 in (231)
  • 0.069 in (155)
  • 0.078 in (108)
  • 0.079 in (380)
  • 0.08 in (59)
  • 0.081 in (189)
  • 0.089 in (124)
  • 0.094 in (607)
  • 0.095 in (1048)
  • 0.096 in (188)
  • 0.098 in (264)
  • 0.099 in (49)
  • 0.1 in (178)
  • 0.109 in (1)
  • 0.119 in (201)
  • 0.12 in (183)
  • 0.125 in (434)
  • 0.126 in (339)
  • 0.128 in (134)
  • 0.156 in (53)
  • 0.157 in (177)
  • 0.158 in (56)
  • 0.159 in (37)
  • 0.187 in (25)
  • 0.188 in (144)
  • 0.189 in (3)
  • 0.197 in (121)
  • 0.198 in (16)
  • 0.237 in (117)
  • 0.25 in (220)
  • 0.311 in (2)
  • 0.313 in (24)
  • 0.315 in (22)
  • 0.375 in (43)
  • 0.394 in (22)
  • 0.492 in (18)
  • 0.5 in (27)
  • 0.63 in (10)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (110)
  • 0.025 mm (156)
  • 0.05 mm (637)
  • 0.076 mm (206)
  • 0.1 mm (2297)
  • 0.125 mm (163)
  • 0.151 mm (184)
  • 0.176 mm (347)
  • 0.2 mm (4431)
  • 0.225 mm (86)
  • 0.25 mm (188)
  • 0.275 mm (86)
  • 0.301 mm (495)
  • 0.325 mm (211)
  • 0.351 mm (286)
  • 0.375 mm (127)
  • 0.4 mm (5594)
  • 0.426 mm (88)
  • 0.45 mm (124)
  • 0.476 mm (43)
  • 0.5 mm (316)
  • 0.525 mm (1)
  • 0.576 mm (327)
  • 0.601 mm (122)
  • 0.65 mm (1)
  • 0.701 mm (28)
  • 0.75 mm (70)
  • 0.775 mm (239)
  • 0.8 mm (6253)
  • 0.826 mm (14)
  • 0.851 mm (52)
  • 0.9 mm (124)
  • 0.925 mm (2)
  • 1.0 mm (432)
  • 1.05 mm (172)
  • 1.175 mm (30)
  • 1.201 mm (4068)
  • 1.225 mm (18)
  • 1.25 mm (155)
  • 1.5 mm (475)
  • 1.526 mm (75)
  • 1.55 mm (233)
  • 1.576 mm (460)
  • 1.6 mm (2839)
  • 1.651 mm (231)
  • 1.75 mm (155)
  • 1.975 mm (108)
  • 2.0 mm (380)
  • 2.025 mm (59)
  • 2.051 mm (189)
  • 2.25 mm (124)
  • 2.375 mm (607)
  • 2.401 mm (1048)
  • 2.45 mm (188)
  • 2.5 mm (264)
  • 2.526 mm (49)
  • 2.551 mm (178)
  • 2.776 mm (1)
  • 3.0 mm (201)
  • 3.026 mm (45)
  • 3.051 mm (138)
  • 3.176 mm (434)
  • 3.2 mm (339)
  • 3.25 mm (134)
  • 3.95 mm (35)
  • 3.975 mm (18)
  • 4.0 mm (177)
  • 4.025 mm (56)
  • 4.05 mm (37)
  • 4.75 mm (25)
  • 4.775 mm (144)
  • 4.801 mm (3)
  • 5.0 mm (121)
  • 5.025 mm (16)
  • 6.0 mm (117)
  • 6.351 mm (220)
  • 7.9 mm (2)
  • 7.95 mm (24)
  • 8.0 mm (22)
  • 9.525 mm (43)
  • 10.0 mm (22)
  • 12.5 mm (18)
  • 12.701 mm (27)
  • 16.0 mm (10)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (9655)
  • 0.65 mm (1)
  • 0.701 mm (1)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (9655)
  • 0.027 in (1)
  • 0.028 in (1)
Corner Chamfer Min to Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (2837)
  • Interrupted (8)
  • Lightly Interrupted Cut (3866)
  • Smooth Cut (6330)
  • Varying Depth of Cut (4151)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (1487)
  • CM2 (1426)
  • K090 (1806)
  • K10M (2041)
  • K10P (1822)
  • K10U (1789)
  • K15U (1755)
  • K20K (2012)
  • K25M (1769)
  • K25P (1739)
  • K313 (4677)
  • K420 (1862)
  • K68 (3180)
  • KB1610 (1662)
  • KB1630 (1497)
  • KB5625 (1761)
  • KB9610 (1857)
  • KBH10 (1684)
  • KBH20 (2062)
  • KC250 (1565)
  • KC5010 (4484)
  • KC5025 (4020)
  • KC5410 (2886)
  • KC5510 (1806)
  • KC720 (2555)
  • KC730 (3685)
  • KC7310 (2167)
  • KC732 (2484)
  • KC8050 (3113)
  • KC810 (3139)
  • KC850 (3660)
  • KC9010 (2434)
  • KC9025 (3017)
  • KC910 (3030)
  • KC9105 (2565)
  • KC9110 (3550)
  • KC9120 (2669)
  • KC9125 (3242)
  • KC9140 (1910)
  • KC9145 (1608)
  • KC9215 (1808)
  • KC9225 (2848)
  • KC9240 (2757)
  • KC9240NEW (2739)
  • KC9245 (1803)
  • KC9315 (3003)
  • KC9320 (2838)
  • KC9325 (2417)
  • KC935 (3333)
  • KC950 (2870)
  • KC990 (2703)
  • KCK05 (2791)
  • KCK05B (2111)
  • KCK15 (2606)
  • KCK15B (2799)
  • KCK20 (3279)
  • KCK20B (3950)
  • KCM15 (2723)
  • KCM15B (2440)
  • KCM25 (2986)
  • KCM25B (2725)
  • KCM35 (2297)
  • KCM35B (2271)
  • KCP05 (2588)
  • KCP05B (1493)
  • KCP10 (3528)
  • KCP10B (4398)
  • KCP25 (3713)
  • KCP25B (4688)
  • KCP30 (2808)
  • KCP30B (1761)
  • KCP40 (1668)
  • KCP40B (1782)
  • KCPK05 (1809)
  • KCS10 (1480)
  • KCS10B (2690)
  • KCU10 (5462)
  • KCU25 (5296)
  • KD050 (1651)
  • KD081 (1517)
  • KD120 (1567)
  • KD1400 (1778)
  • KD1425 (2068)
  • KT125 (1615)
  • KT175 (2236)
  • KT315 (3261)
  • KU10T (2450)
  • KU30T (3017)
  • KY1320 (1667)
  • KY1615 (1852)
  • KY3000 (1812)
  • KY3400 (1487)
  • KY3500 (2160)
  • KY4400 (1786)
  • KYHK15B (1947)
  • KYK25 (1432)
  • KYK35 (1786)
  • NL250 (1752)
  • NL920 (1555)
  • SP3019 (1454)
Hand Of Tool
Hand Of Tool
  • L (1697)
  • N (268)
  • N - Neutral (3)
  • R (2182)
Wiper Insert
Wiper Insert
  • N (13378)
  • Y (2071)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (147)
  • 4.575 mm (8)
  • 5.176 mm (8)
  • 5.275 mm (5)
  • 5.7 mm (4)
  • 5.801 mm (5)
  • 5.95 mm (9)
  • 7.101 mm (8)
  • 7.25 mm (14)
  • 7.426 mm (4)
  • 7.525 mm (5)
  • 8.8 mm (4)
  • 9.05 mm (6)
  • 9.1 mm (5)
  • 10.55 mm (12)
  • 11.0 mm (14)
  • 12.201 mm (30)
  • 13.0 mm (31)
  • 15.25 mm (43)
  • 15.875 mm (4)
  • 16.0 mm (60)
  • 18.55 mm (14)
  • 19.55 mm (43)
  • 20.0 mm (78)
  • 21.6 mm (10)
  • 22.85 mm (4)
  • 23.625 mm (41)
  • 24.901 mm (22)
  • 25.0 mm (103)
  • 25.401 mm (8)
  • 26.0 mm (11)
  • 28.576 mm (4)
  • 30.0 mm (8)
  • 30.475 mm (43)
  • 31.0 mm (10)
  • 31.75 mm (6)
  • 32.0 mm (151)
  • 33.0 mm (6)
  • 33.025 mm (27)
  • 34.0 mm (4)
  • 34.926 mm (6)
  • 35.0 mm (8)
  • 36.0 mm (5)
  • 37.35 mm (22)
  • 38.1 mm (8)
  • 40.0 mm (170)
  • 41.0 mm (4)
  • 41.301 mm (57)
  • 42.0 mm (5)
  • 43.301 mm (26)
  • 44.0 mm (18)
  • 44.7 mm (37)
  • 47.6 mm (56)
  • 48.0 mm (4)
  • 50.0 mm (202)
  • 50.801 mm (36)
  • 51.051 mm (13)
  • 52.0 mm (16)
  • 54.0 mm (34)
  • 55.0 mm (6)
  • 56.625 mm (49)
  • 57.151 mm (12)
  • 57.2 mm (29)
  • 58.0 mm (4)
  • 60.0 mm (72)
  • 60.325 mm (4)
  • 60.95 mm (34)
  • 63.0 mm (81)
  • 63.5 mm (36)
  • 64.0 mm (4)
  • 65.825 mm (4)
  • 68.0 mm (4)
  • 69.851 mm (4)
  • 70.0 mm (61)
  • 74.0 mm (4)
  • 75.0 mm (59)
  • 76.2 mm (8)
  • 76.95 mm (26)
  • 80.0 mm (62)
  • 82.551 mm (14)
  • 86.0 mm (68)
  • 88.9 mm (535)
  • 90.0 mm (14)
  • 100.0 mm (113)
  • 106.0 mm (31)
  • 120.0 mm (13)
  • 130.0 mm (6)
  • 132.0 mm (4)
  • 139.701 mm (728)
  • 174.601 mm (125)
  • 180.0 mm (72)
  • 200.0 mm (8)
  • 209.601 mm (236)
  • 222.3 mm (58)
  • 250.0 mm (72)
  • 290.0 mm (7)
  • 333.0 mm (4)
  • 350.0 mm (66)
  • 850.0 mm (6)
  • 2000.0 mm (6)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (147)
  • 0.18 in (8)
  • 0.205 in (8)
  • 0.209 in (5)
  • 0.224 in (4)
  • 0.228 in (5)
  • 0.234 in (9)
  • 0.28 in (8)
  • 0.286 in (14)
  • 0.292 in (4)
  • 0.296 in (5)
  • 0.347 in (4)
  • 0.356 in (6)
  • 0.358 in (5)
  • 0.416 in (12)
  • 0.433 in (14)
  • 0.48 in (30)
  • 0.512 in (31)
  • 0.6 in (43)
  • 0.625 in (4)
  • 0.63 in (60)
  • 0.73 in (14)
  • 0.77 in (43)
  • 0.787 in (78)
  • 0.85 in (10)
  • 0.9 in (4)
  • 0.93 in (41)
  • 0.98 in (22)
  • 0.984 in (103)
  • 1.0 in (8)
  • 1.024 in (11)
  • 1.125 in (4)
  • 1.181 in (8)
  • 1.2 in (43)
  • 1.22 in (10)
  • 1.25 in (6)
  • 1.26 in (151)
  • 1.299 in (6)
  • 1.3 in (27)
  • 1.339 in (4)
  • 1.375 in (6)
  • 1.379 in (8)
  • 1.417 in (5)
  • 1.47 in (22)
  • 1.5 in (8)
  • 1.575 in (170)
  • 1.614 in (4)
  • 1.627 in (57)
  • 1.655 in (5)
  • 1.705 in (26)
  • 1.732 in (18)
  • 1.76 in (37)
  • 1.874 in (56)
  • 1.891 in (4)
  • 1.969 in (202)
  • 2.0 in (36)
  • 2.011 in (13)
  • 2.047 in (16)
  • 2.126 in (34)
  • 2.165 in (6)
  • 2.229 in (49)
  • 2.25 in (12)
  • 2.253 in (29)
  • 2.283 in (4)
  • 2.362 in (72)
  • 2.375 in (4)
  • 2.4 in (34)
  • 2.48 in (81)
  • 2.5 in (36)
  • 2.52 in (4)
  • 2.592 in (4)
  • 2.677 in (4)
  • 2.75 in (4)
  • 2.757 in (61)
  • 2.914 in (4)
  • 2.953 in (59)
  • 3.0 in (8)
  • 3.031 in (26)
  • 3.15 in (62)
  • 3.25 in (14)
  • 3.386 in (68)
  • 3.5 in (535)
  • 3.543 in (14)
  • 3.938 in (113)
  • 4.173 in (31)
  • 4.724 in (13)
  • 5.118 in (6)
  • 5.197 in (4)
  • 5.5 in (728)
  • 6.875 in (125)
  • 7.087 in (72)
  • 7.875 in (8)
  • 8.252 in (236)
  • 8.752 in (58)
  • 9.843 in (72)
  • 11.417 in (7)
  • 13.11 in (4)
  • 13.781 in (66)
  • 33.465 in (6)
  • 78.74 in (6)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max