successfully added to cart
View Cart

Tournage dans le ferroviaire

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (166)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (165)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (165)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (165)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (166)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (166)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (165)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (165)
  • M Stainless Steel (26)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (26)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (26)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (26)
  • K Cast Iron (160)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (155)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (160)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (160)
  • N Non-Ferrous Materials (19)
    • N1
      Wrought Aluminum
      (18)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (18)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (19)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (18)
    • N6
      Carbon, Graphite Composites, CFRP
      (14)
    • N7
      MMC's
      (18)
  • S High-Temp Alloys (25)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (25)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (25)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (25)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (23)
  • H Hardened Materials (20)
    • H1
      Hardened Materials 44-48 HRC
      (20)
    • H2
      Hardened Materials 48-55 HRC
      (20)
    • H3
      Hardened Materials 56-60 HRC
      (20)
Select First Choice
  • IN (3)
Applications
Applications
  • CRT Profiling CRT Profiling (6)
  • Facing Facing (29)
  • ID Facing ID Facing (10)
  • ID Thread Turning ID Thread Turning (1)
  • Multiple Direction Cutting Multiple Direction Cutting (31)
  • Profiling Profiling (14)
  • Turning Turning (29)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (26)
  • Interrupted (10)
  • Lightly Interrupted Cut (42)
  • Smooth Cut (53)
  • Varying Depth of Cut (35)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 75.0 (4)
  • 90.0 (24)
  • 93.0 (4)
  • 95.0 (8)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (2)
  • Toolholder (28)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (59)
  • 2.0 (26)
  • 3.0 (1)
  • 4.0 (54)
  • 6.0 (22)
  • 8.0 (33)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.794 mm (4)
  • 0.8 mm (19)
  • 1.191 mm (5)
  • 1.2 mm (28)
  • 1.588 mm (11)
  • 1.6 mm (26)
  • 2.4 mm (30)
  • 3.18 mm (1)
  • 3.2 mm (5)
  • 3.97 mm (1)
  • 4.0 mm (27)
  • 4.763 mm (5)
  • 5.0 mm (12)
  • 6.0 mm (10)
  • 7.912 mm (2)
  • 7.94 mm (3)
  • 8.0 mm (7)
  • 9.525 mm (2)
  • 10.0 mm (10)
  • 12.5 mm (15)
  • 12.7 mm (2)
  • 16.0 mm (8)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.031 in (8)
  • 0.0313 in (23)
  • 0.0469 in (31)
  • 0.047 in (10)
  • 0.0625 in (27)
  • 0.063 in (10)
  • 0.0938 in (30)
  • 0.094 in (4)
  • 0.125 in (4)
  • 0.126 in (2)
  • 0.1563 in (1)
  • 0.157 in (10)
  • 0.1575 in (23)
  • 0.1875 in (5)
  • 0.196 in (8)
  • 0.1969 in (2)
  • 0.197 in (8)
  • 0.236 in (4)
  • 0.2362 in (6)
  • 0.3115 in (2)
  • 0.3125 in (3)
  • 0.315 in (7)
  • 0.375 in (2)
  • 0.3935 in (9)
  • 0.3937 in (5)
  • 0.492 in (8)
  • 0.4922 in (9)
  • 0.5 in (2)
  • 0.6299 in (7)
  • 0.63 in (1)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (145)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (145)
Corner Chamfer Min to Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (3)
  • Lightly Interrupted Cut (19)
  • Smooth Cut (30)
  • Varying Depth of Cut (12)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (16)
  • AC5 (6)
  • CG4 (4)
  • CL4 (16)
  • CM2 (2)
  • CM3 (23)
  • CM5 (12)
  • CPX (17)
  • GX (14)
  • K090 (10)
  • K1 (10)
  • K10M (10)
  • K10P (8)
  • K20K (10)
  • K21 (10)
  • K25P (10)
  • K313 (18)
  • K35P (2)
  • K40 (11)
  • K420 (16)
  • K68 (19)
  • KC210 (10)
  • KC250 (10)
  • KC5010 (21)
  • KC5025 (17)
  • KC5115RR (2)
  • KC5125RR (2)
  • KC5410 (14)
  • KC5510 (10)
  • KC720 (2)
  • KC730 (18)
  • KC7310 (10)
  • KC732 (4)
  • KC8050 (25)
  • KC810 (11)
  • KC850 (22)
  • KC9010 (12)
  • KC9025 (12)
  • KC910 (14)
  • KC9105 (8)
  • KC9110 (37)
  • KC9110RR (1)
  • KC9115RR (2)
  • KC9120 (10)
  • KC9125 (38)
  • KC9125RR (2)
  • KC9140 (12)
  • KC9145 (10)
  • KC9215 (10)
  • KC9225 (10)
  • KC9240 (22)
  • KC9240NEW (22)
  • KC9245 (10)
  • KC9315 (31)
  • KC9320 (13)
  • KC9325 (10)
  • KC935 (10)
  • KC950 (11)
  • KC990 (10)
  • KCD25 (1)
  • KCK05 (10)
  • KCK05B (10)
  • KCK15 (16)
  • KCK15B (22)
  • KCK20 (23)
  • KCK20B (18)
  • KCM15 (10)
  • KCM15B (8)
  • KCM25 (20)
  • KCM25B (15)
  • KCM35 (10)
  • KCM35B (10)
  • KCP10 (62)
  • KCP10B (48)
  • KCP25 (83)
  • KCP25B (56)
  • KCP30 (27)
  • KCP30B (19)
  • KCP40 (12)
  • KCP40B (12)
  • KCPK05 (25)
  • KCS10 (12)
  • KCS10B (17)
  • KCU10 (21)
  • KCU25 (21)
  • KM1 (6)
  • KU30T (10)
  • KY1320 (8)
  • KY1540 (8)
  • KY1615 (20)
  • KY2000 (8)
  • KY3000 (10)
  • KY3400 (10)
  • KY3500 (10)
  • KY4300 (8)
  • KY4400 (8)
  • KYHK15B (8)
  • KYK25 (8)
  • KYK35 (10)
  • KYS25 (8)
  • KYS30 (8)
  • MC2 (7)
  • NL250 (10)
  • NL300 (13)
  • NL400 (8)
  • NL920 (4)
  • SP0819 (10)
  • SP3019 (10)
  • SP4019 (8)
  • SPADAP (10)
  • TN7035 (3)
Hand Of Tool
Hand Of Tool
  • L (10)
  • N (9)
  • R (11)
Wiper Insert
Wiper Insert
  • N (166)
  • Y (9)
Cutting Direction
Cutting Direction
  • B (8)
  • E (8)
  • S (14)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (13)
  • NEUTRAL (ZERO) (15)
frontEnd
Adapter Front-End
Adapter Front-End
  • KM MODULAR ADAPTER (6)
Clamp Style
Clamp Style
  • M (6)
  • P (9)
  • X (25)
Front End Type
Front End Type
  • KMT - KM Adapter (6)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (26)
  • L-RECTANGLE 90 (16)
  • L-RECTANGLE ON EDGE 90 (17)
  • O-OCTOGON 135 (1)
  • R-ROUND (55)
  • S-SQUARE 90 (37)
  • T-TRIANGLE 60 (23)
Cartridge Size
Cartridge Size
  • 32 (10)
Front End Style
Front End Style
  • KMT00 All KM, except 02,05,09 (6)
Maximum Cutting Depth
Maximum Cutting Depth
  • 16.0 mm (1)
  • 24.0 mm (2)
  • 32.0 mm (1)
  • 33.0 mm (1)
  • 40.15 mm (2)
  • 78.0 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.6299 in (1)
  • 0.9449 in (2)
  • 1.2598 in (1)
  • 1.2992 in (1)
  • 1.5807 in (2)
  • 3.0709 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 20.0000 mm (1)
  • 25.0000 mm (1)
  • 30.0000 mm (1)
  • 40.0000 mm (1)
  • 50.0000 mm (1)
  • 56.0000 mm (1)
Gage Length
Gage Length
  • 0.7874 in (1)
  • 0.9843 in (1)
  • 1.1810 in (1)
  • 1.5750 in (1)
  • 1.9685 in (1)
  • 2.2050 in (1)
Front End Size
Front End Size
  • 32.0 mm (1)
  • 40.0 mm (1)
  • 50.0 mm (1)
  • 63.0 mm (1)
  • 80.0 mm (1)
  • 100.0 mm (1)
Front End Size Min to Front End Size Max
Front End Size
Front End Size
  • 1.2598 in (1)
  • 1.5748 in (1)
  • 1.9685 in (1)
  • 2.4803 in (1)
  • 3.1496 in (1)
  • 3.937 in (1)
Front End Size Min to Front End Size Max
insertGeometry
Shape
Shape
  • C-DIAMOND/RHOMBIC 80 (18)
  • L-RECTANGLE 90 (7)
  • L-RECTANGLE ON EDGE 90 (17)
  • O-OCTOGON 135 (1)
  • R-ROUND (38)
  • S-SQUARE 90 (33)
  • T-TRIANGLE 60 (23)
Insert IC Size
Insert IC Size
  • 0.075 in (1)
  • 0.375 in (11)
  • 0.4724 in (3)
  • 0.5 in (18)
  • 0.623 in (2)
  • 0.625 in (14)
  • 0.63 in (4)
  • 0.75 in (19)
  • 0.787 in (5)
  • 0.7874 in (1)
  • 0.984 in (6)
  • 0.9844 in (5)
  • 1.0 in (16)
  • 1.2598 in (7)
  • 1.26 in (1)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 9.525 mm (11)
  • 12.0 mm (3)
  • 12.7 mm (18)
  • 15.824 mm (2)
  • 15.875 mm (14)
  • 16.0 mm (4)
  • 19.05 mm (20)
  • 20.0 mm (6)
  • 25.0 mm (11)
  • 25.4 mm (16)
  • 32.0 mm (8)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 0.259 in (1)
  • 0.375 in (1)
  • 0.5 in (6)
  • 0.5077 in (4)
  • 0.538 in (2)
  • 0.54 in (2)
  • 0.625 in (5)
  • 0.6346 in (3)
  • 0.6496 in (7)
  • 0.65 in (3)
  • 0.748 in (9)
  • 0.75 in (12)
  • 0.7616 in (7)
  • 0.866 in (2)
  • 0.8661 in (6)
  • 0.902 in (2)
  • 1.0 in (10)
  • 1.0154 in (4)
  • 1.0825 in (3)
  • 1.083 in (2)
  • 1.1811 in (4)
  • 1.25 in (4)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 6.579 mm (1)
  • 9.525 mm (1)
  • 12.7 mm (6)
  • 12.896 mm (4)
  • 13.66 mm (2)
  • 13.72 mm (2)
  • 15.875 mm (5)
  • 16.12 mm (3)
  • 16.5 mm (10)
  • 19.0 mm (9)
  • 19.05 mm (12)
  • 19.344 mm (7)
  • 22.0 mm (8)
  • 22.91 mm (2)
  • 25.4 mm (10)
  • 25.792 mm (4)
  • 27.496 mm (3)
  • 27.5 mm (2)
  • 30.0 mm (4)
  • 31.75 mm (4)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • 52 (2)
  • 75 (1)
  • 76 (2)
  • 80 (1)
  • RH (12)
  • RM (35)
  • RN (16)
  • RP (14)
  • RRF (4)
  • RRH (5)
  • RRP (8)
  • RRSM (3)
  • RU (2)
  • S-WT5 (2)
  • UP (6)
  • UPG (18)
Cutting Tool Material
Cutting Tool Material
  • C A (22)
  • C N (10)
  • H T (12)
  • H W (175)
Tolerance Class
Tolerance Class
  • G (1)
  • M (108)
  • U (20)
backEnd
Connection Type
Connection Type
  • SQUARE SHANK (28)
  • TAPER SHANK (2)
System Size
System Size
  • KM80TS (2)
Back-End Diameter
Back-End Diameter
  • 3.1496 in (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 80.0 mm (2)
Back-End Diameter Min to Back-End Diameter Max
hidden
Category Path
Category Path
other
Grade
Grade
  • K40 (2)
  • K68 (1)
  • KC5115RR (1)
  • KC5125RR (1)
  • KC850 (1)
  • KC9110 (2)
  • KC9115RR (1)
  • KC9125 (3)
  • KC9125RR (1)
  • KCK15B (2)
  • KCK20 (5)
  • KCP10 (28)
  • KCP10B (14)
  • KCP25 (47)
  • KCP25B (19)
  • KCP30 (3)
  • KCPK05 (5)
  • KCS10 (1)
Platform
Platform
  • Beyond RU & UP (26)
  • Fix Perfect (15)
  • KM100 (1)
  • KM32 (1)
  • KM40 (1)
  • KM50 (1)
  • KM63 (1)
  • KM80 (3)
  • Kenlever (6)
  • Kenloc (78)
  • Railroad Turning (39)
  • Screw-On (4)
Tool Unit
Tool Unit
  • I (142)
  • M (178)
Drilling Condition Material
Drilling Condition Material
  • K-All (4)
  • P-All (27)
Cutting Condition Material
Cutting Condition Material
  • H-All (16)
  • K-All (22)
  • M-All (23)
  • N-All (18)
  • P-All (50)
  • S-All (23)
  • S2 (8)
Insert Hand
Insert Hand
  • N (175)
Over All Length [L]
Over All Length [L]
  • 42.7 mm (8)
  • 45.0 mm (2)
  • 70.0 mm (2)
  • 150.0 mm (6)
  • 170.0 mm (6)
  • 177.8 mm (2)
  • 200.0 mm (2)
  • 203.2 mm (2)
  • 250.0 mm (9)
  • 412.75 mm (1)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 1.681 in (2)
  • 1.6811 in (6)
  • 1.772 in (2)
  • 2.7559 in (2)
  • 5.9055 in (6)
  • 6.6929 in (6)
  • 7.0 in (2)
  • 7.874 in (2)
  • 8.0 in (2)
  • 9.8425 in (3)
  • 9.843 in (6)
  • 16.25 in (1)
Over All Length [L] Min to Over All Length [L] Max
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Plaquettes de tournage ISO

Plaquettes Kenloc™
(13 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
3751687 TNMG160408RP TNMG332RP   KCP25 9.5250 .3750 16.5000 .6500 4.7630 .1875 0.7940 .0312 3.8100 .1500
    List price:
    $15.31 /each.
    Your price::
    Qty
    3751688 TNMG160412RP TNMG333RP   KCP25 9.5250 .3750 16.5000 .6496 4.7600 .1875 1.2000 .0468 3.8100 .1500
      List price:
      $15.31 /each.
      Your price::
      Qty
      3753898 TNMG160408RP TNMG332RP   KCK20 9.5250 .3750 16.5000 .6500 4.7630 .1875 0.7940 .0312 3.8100 .1500
        List price:
        $15.31 /each.
        Your price::
        Qty
        3749284 TNMG160408RP TNMG332RP   KCP10 9.5250 .3750 16.5000 .6500 4.7630 .1875 0.7940 .0312 3.8100 .1500
          List price:
          $15.31 /each.
          Your price::
          Qty
          3749285 TNMG160412RP TNMG333RP   KCP10 9.5250 .3750 16.5000 .6496 4.7600 .1875 1.2000 .0468 3.8100 .1500
            List price:
            $15.31 /each.
            Your price::
            Qty
            3749286 TNMG160416RP TNMG334RP   KCP10 9.5250 .3750 16.5000 .6496 4.7630 .1875 1.6000 .0625 3.8100 .1500
              List price:
              $15.31 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              Porte-outils Kenloc™

              Plaquettes Kenloc
              (2 Products)
              • TurningTurning
              • ProfilingProfiling
              • FacingFacing
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length Gage Insert Lock Pin ID Drive Size Clamp Screw ID Drive Size
              1102537 MCLNL4040R19 MCLNL4040R19 40.0000 1.574 40.0000 1.574 50.0000 1.968 200.0000 7.874 38.0000 1.496 CN..190612 4 mm 4 mm
                List price:
                $139.96 /each.
                Your price::
                Qty
                1101707 MCLNR4040R19 MCLNR4040R19 40.0000 1.575 40.0000 1.575 50.0000 1.969 200.0000 7.874 38.0000 1.500 CN..190612 4 mm 4 mm
                  List price:
                  $139.96 /each.
                  Your price::
                  Qty
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty

                  Sold in pkg. of

                  ORIGINAL PRODUCT

                  Porte-outils Kenlever™

                  Plaquettes Kenloc™
                  (2 Products)
                  • TurningTurning
                  • ProfilingProfiling
                  • FacingFacing
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length Gage Insert Clamp Screw ID Drive Size
                  1192377 PCLNL4040S19 PCLNL4040S19 40.0000 1.575 40.0000 1.575 50.0000 1.969 250.0000 9.843 36.0000 1.420 CN..190612 25 IP
                    List price:
                    $276.75 /each.
                    Your price::
                    Qty
                    1192379 PCLNR4040S19 PCLNR4040S19 40.0000 1.575 40.0000 1.575 50.0000 1.969 250.0000 9.843 36.0000 1.420 CN..190612 25 IP
                      List price:
                      $259.59 /each.
                      Your price::
                      Qty
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty

                      Sold in pkg. of

                      ORIGINAL PRODUCT

                      Porte-outils Fix-Perfect™

                      Plaquettes vissées
                      (6 Products)
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CD] Cutting Depth [CD] Cutting Depth Gage Insert Clamp Screw ID Drive Size
                      1192388 PRCCN3225P16H1 PRCCN3225P16H1 32.0000 1.259 25.0000 .9843 20.5000 .8071 170.0000 6.692 33.0000 1.299 RC..1606M0 3 mm
                        List price:
                        $172.56 /each.
                        Your price::
                        Qty
                        1192389 PRCCN3232P20H1 PRCCN3232P20H1 32.0000 1.259 32.0000 1.259 26.0000 1.023 170.0000 6.692 32.0000 1.259 RC..2006M0 4 mm
                          List price:
                          $200.66 /each.
                          Your price::
                          Qty
                          1228888 PRCCN4040S25H1 PRCCN4040S25H1 40.0000 1.574 40.0000 1.574 32.5000 1.279 250.0000 9.842 78.0000 3.070 RC..2507M0 4 mm
                            List price:
                            $266.11 /each.
                            Your price::
                            Qty
                            1244826 PRCCN2525M08H1 PRCCN2525M08H1 25.0000 .9843 25.0000 .9843 16.5000 .6496 150.0000 5.905 16.0000 .6299 RC..0803M0 2 mm
                              List price:
                              $173.00 /each.
                              Your price::
                              Qty
                              1244827 PRCCN2525M10H1 PRCCN2525M10H1 25.0000 .9843 25.0000 .9843 17.5000 .6890 150.0000 5.905 24.0000 .9449 RC..1003M0 2 mm
                                List price:
                                $165.08 /each.
                                Your price::
                                Qty
                                1244828 PRCCN2525M12H1 PRCCN2525M12H1 25.0000 .9843 25.0000 .9843 18.5000 .7283 150.0000 5.905 24.0000 .9449 RC..1204M0 2.5 mm
                                  List price:
                                  $165.30 /each.
                                  Your price::
                                  Qty
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is not available
                                  Replacement Product This item may be available through a distributor
                                  Qty

                                  Sold in pkg. of