Carrières
✉ Gardons le contact
© 2022 Terms & Conditions of Use | Conditions of Sale | Data Privacy Policy
Kennametal Inc. 525 William Penn Place Suite 3300, Pittsburgh, PA 15219
Attachment Guidelines
These are general guidelines on how to apply KenCast to your equipment. However, weld applications may vary substantially, depending on the material to which KenCast is applied. Consult a local welding representative or contact your Kennametal Representative for recommendations on your particular application.
Weld Material
| .052" (13,2mm) wire (flux cored) |
|
| 1/8" (3,1mm) weld rod |
|
These specifications are for welding to low- to medium-carbon steels. When welding to specialty steels, such as stainless and manganese, contact your Kennametal Representative for welding recommendations. |
|
Welding Instructions
KenCast parts must be welded properly to achieve optimum performance:
- Always attach castings with the steel side against the surface to be protected.
- The carbide surface side, painted black to identify the wear side, faces outward.
- Welding the carbide surface can cause cracking and is detrimental to carbide particles.
Cutting Instructions
Option #1
- Score the steel side with an angle grinder or chop saw with corundum wheel, then strike with a hammer.
Option #2
- Plasma or waterjet.
