R Style Inserts
-
P Steel (4)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (4)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (4)
-
-
K Cast Iron (21)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (21)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (15)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (1)
-
-
N Non-Ferrous Materials (3)
-
N1Wrought Aluminum (1)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (1)
-
N4Copper, Brass, Zinc-based on machinability index range of 70-100 (3)
-
N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1)
-
N7MMC's (1)
-
-
S High-Temp Alloys (47)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (35)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (47)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (35)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (3)
-
-
H Hardened Materials (18)
-
H1Hardened Materials 44-48 HRC (18)
-
H2Hardened Materials 48-55 HRC (12)
-
H3Hardened Materials 56-60 HRC (12)
-
-
C CFRP Materials (1)
-
C2CFRP / Aluminium CFRP / Non-Ferrous (1)
-
-
Heavily Interrupted Cut (14)
-
Lightly Interrupted Cut (18)
-
Smooth Cut (18)
-
0.125 in (1)
-
0.188 in (10)
-
0.25 in (47)
-
0.375 in (8)
-
0.5 in (6)
-
3.176 mm (1)
-
4.775 mm (10)
-
6.351 mm (47)
-
9.525 mm (8)
-
12.701 mm (6)
-
K313 (1)
-
K68 (2)
-
KB1340 (3)
-
KB9640 (6)
-
KBK45 (3)
-
KY1540 (6)
-
KY1615 (8)
-
KY3500 (2)
-
KY4300 (9)
-
KY4400 (2)
-
KYHK15B (12)
-
KYK10 (1)
-
KYS25 (3)
-
KYS30 (12)
-
KYSP30 (2)
-
6.351 mm (1)
-
9.525 mm (10)
-
12.701 mm (47)
-
19.05 mm (8)
-
25.401 mm (6)
-
0.25 in (1)
-
0.375 in (10)
-
0.5 in (47)
-
0.75 in (8)
-
1.0 in (6)
-
E (1)
-
GN (4)
-
B H (9)
-
C A (18)
-
C N (39)
-
H W (6)
-
G (63)
-
M (9)