KM Micro™ OD Applications • A2™ Grooving and Cut-Off
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (3)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(3)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(3)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(3)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(3)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(3)
- M Stainless Steel (3)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(3)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(3)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(3)
- K Cast Iron (3)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(3)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(3)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(3)
- N Non-Ferrous Materials (3)
- N1Wrought Aluminum (3)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(3)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (3)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (3)
- N6Carbon, Graphite Composites, CFRP (3)
- S High-Temp Alloys (3)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(3)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(3)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(3)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(3)
Applications
Applications
Face Grooving (3)
Grooving (3)
ID Grooving (3)
Multiple Direction Cutting (3)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (3)
- Lightly Interrupted Cut (3)
- Smooth Cut (3)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (3)
to
Connection Style
Connection Style
- Cutoff Support Blade A1-A3 (3)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (3)
to
Over All Length [L]
Over All Length [L]
- 20.252 mm(1)
- 25.198 mm(2)
to
Corner Radius
Corner Radius
- 0.1 mm(1)
- 0.15 mm(1)
- 0.2 mm(2)
- 0.3 mm(2)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC5025 (3)
- KCU25 (3)
- KCU25B (3)
- KMF (3)
- KMS (2)
- KT315 (3)
Hand Of Tool
Hand Of Tool
- N - Neutral (3)
Wiper Insert
Wiper Insert
- N (3)
F Dimension
F Dimension
- 1.7 mm(1)
- 2.0 mm(2)
to
Cutting Direction
Cutting Direction
- E (3)
Front-End
Adapter Front-End
Adapter Front-End
- CUTOFF SUPPORT BLADE (4)
Clamp Style
Clamp Style
- Y (3)
Cutting Width
Cutting Width
- 1.55 mm(1)
- 1.6 mm(1)
- 2.2 mm(2)
to
Front End Type
Front End Type
- PMK - Prismatic Adapter Kenna (4)
Insert Shape
Insert Shape
- PRISMATIC (3)
Front End Style
Front End Style
- PMK03 CutOffBld A1-A3 Hlfw/Pin (4)
Maximum Cutting Depth
Maximum Cutting Depth
- 11.0 mm(1)
- 16.0 mm(2)
to
Gage Length
Gage Length
- 4.8000 mm(4)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- H T (3)
- H W (3)
Back-End
Connection Type
Connection Type
- Cutoff Blade (3)
System Size
System Size
- KM12 (2)
- KM16 (2)
Shank Height
Shank Height
- 19.0 mm(3)
to
Shank Width
Shank Width
- 1.8 mm(3)
to
No filters matching ""
