Bolt-On Heads Through Coolant
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (104)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(104)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(104)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(104)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(104)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(104)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(104)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(104)
- M Stainless Steel (104)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(104)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(104)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(104)
- K Cast Iron (104)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(104)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(104)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(104)
- N Non-Ferrous Materials (97)
- N1Wrought Aluminum (97)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(97)
- N3High-Silicon Aluminum Alloys Si >12.2%(60)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (97)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (97)
- N6Carbon, Graphite Composites, CFRP (97)
- N7MMC's (76)
- S High-Temp Alloys (104)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(104)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(104)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(104)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(104)
- H Hardened Materials (93)
- H1Hardened Materials 44-48 HRC(93)
- H2Hardened Materials 48-55 HRC(93)
- H3Hardened Materials 56-60 HRC(86)
- H4Hardened Materials >60 HRC(76)
- C CFRP Materials (86)
- C1CFRP, CFRP / CFRP (86)
- C2CFRP / Aluminium CFRP / Non-Ferrous (76)
Applications
Applications
ID Grooving (11)
ID Thread Turning (11)
TRN Boring (11)
Type of Thread
Type of Thread
- 55 (6)
- 60 (16)
- ACME (17)
- API (13)
- API BUTTRESS (2)
- API RD (12)
- BSPT (4)
- BSW (14)
- BUTTRESS (10)
- M (9)
- NPT (12)
- NPTF (4)
- RD DIN 405 (6)
- STUB ACME (14)
- TR DIN 103 (6)
- UN (14)
- UNJ (12)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (96)
- Lightly Interrupted Cut (96)
- Smooth Cut (96)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (2)
- 62.5 (2)
- 90.0 (34)
- 93.0 (34)
- 95.0 (32)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (66)
- 2.0 (73)
- 3.0 (27)
- 4.0 (46)
- 6.0 (14)
- 8.0 (20)
to
Over All Length [L]
Over All Length [L]
- 0.696 in(12)
- 0.734 in(2)
- 0.892 in(6)
- 0.971 in(4)
- 0.994 in(1)
- 1.01 in(2)
- 1.049 in(2)
- 1.246 in(6)
- 1.27 in(3)
- 1.285 in(12)
- 1.348 in(4)
- 1.364 in(14)
- 1.389 in(7)
- 1.405 in(24)
- 1.463 in(1)
- 1.522 in(3)
- 1.561 in(1)
to
Over All Length [L]
Over All Length [L]
- 17.651 mm(12)
- 18.651 mm(2)
- 22.651 mm(6)
- 24.651 mm(4)
- 25.25 mm(1)
- 25.651 mm(2)
- 26.651 mm(2)
- 31.651 mm(6)
- 32.25 mm(3)
- 32.65 mm(12)
- 34.25 mm(4)
- 34.65 mm(14)
- 35.25 mm(7)
- 35.65 mm(24)
- 37.15 mm(1)
- 38.651 mm(3)
- 39.651 mm(1)
to
Corner Radius
Corner Radius
- 0.0 in(18)
- 0.001 in(22)
- 0.002 in(29)
- 0.003 in(14)
- 0.004 in(62)
- 0.005 in(8)
- 0.006 in(14)
- 0.007 in(10)
- 0.008 in(78)
- 0.01 in(10)
- 0.011 in(3)
- 0.012 in(10)
- 0.014 in(18)
- 0.016 in(92)
- 0.017 in(2)
- 0.019 in(10)
- 0.02 in(8)
- 0.023 in(10)
- 0.027 in(1)
- 0.028 in(4)
- 0.031 in(92)
- 0.035 in(10)
- 0.037 in(2)
- 0.039 in(9)
- 0.047 in(82)
- 0.06 in(8)
- 0.062 in(8)
- 0.063 in(56)
- 0.078 in(8)
- 0.079 in(8)
- 0.094 in(6)
- 0.095 in(20)
- 0.098 in(1)
- 0.125 in(4)
- 0.126 in(2)
to
Corner Radius
Corner Radius
- 0.0 mm(18)
- 0.025 mm(22)
- 0.05 mm(29)
- 0.076 mm(14)
- 0.1 mm(62)
- 0.125 mm(8)
- 0.151 mm(14)
- 0.176 mm(10)
- 0.2 mm(78)
- 0.225 mm(8)
- 0.25 mm(10)
- 0.275 mm(3)
- 0.301 mm(10)
- 0.325 mm(10)
- 0.351 mm(18)
- 0.4 mm(92)
- 0.426 mm(2)
- 0.45 mm(10)
- 0.476 mm(3)
- 0.5 mm(8)
- 0.576 mm(10)
- 0.65 mm(1)
- 0.701 mm(4)
- 0.775 mm(8)
- 0.8 mm(84)
- 0.9 mm(10)
- 0.925 mm(2)
- 1.0 mm(9)
- 1.201 mm(82)
- 1.5 mm(8)
- 1.576 mm(8)
- 1.6 mm(56)
- 1.975 mm(8)
- 2.0 mm(8)
- 2.375 mm(6)
- 2.401 mm(20)
- 2.5 mm(1)
- 3.176 mm(4)
- 3.2 mm(2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K060 (12)
- K090 (2)
- K313 (86)
- K420 (10)
- K68 (63)
- KB1340 (16)
- KB1345 (38)
- KB1610 (38)
- KB1630 (44)
- KB5610 (34)
- KB5630 (38)
- KBH10 (60)
- KBH10B (36)
- KBH20 (69)
- KBH20B (36)
- KBK35 (12)
- KC5010 (101)
- KC5020P (2)
- KC5025 (102)
- KC5410 (79)
- KC720 (10)
- KC730 (82)
- KC850 (86)
- KC9110 (1)
- KC9125 (2)
- KCK05 (76)
- KCK05B (38)
- KCK15 (76)
- KCK15B (76)
- KCK20 (90)
- KCK20B (88)
- KCM15 (76)
- KCM15B (78)
- KCM25 (82)
- KCM25B (82)
- KCM25S (16)
- KCM35 (74)
- KCM35B (42)
- KCP05 (62)
- KCP05B (52)
- KCP10 (86)
- KCP10B (94)
- KCP15 (4)
- KCP20S (16)
- KCP25 (84)
- KCP25B (94)
- KCP25C (84)
- KCP30 (82)
- KCP30B (38)
- KCP40 (42)
- KCP40B (52)
- KCPK05 (48)
- KCS10 (44)
- KCS10B (78)
- KCS25S (16)
- KCU10 (96)
- KCU10B (97)
- KCU25 (93)
- KCU25B (94)
- KD1400 (56)
- KD1405 (22)
- KD1425 (60)
- KN10S (18)
- KS15 (12)
- KT315 (81)
- KT325 (40)
- KTP10 (70)
- KTP25S (64)
- KY1540 (12)
- KY1615 (2)
- KY3500 (44)
- KY4300 (22)
- KY4400 (46)
- KYHK15B (46)
- KYK10 (24)
- KYK25 (22)
- KYS25 (12)
- KYS30 (14)
- X00580 (12)
- X00581 (12)
- X00582 (12)
- X00583 (12)
- X00584 (12)
- X00585 (12)
- X00586 (12)
- X00591 (12)
- X00592 (12)
- X00593 (12)
- X00594 (12)
- X00596 (12)
- X00597 (12)
- X00599 (12)
Hand Of Tool
Hand Of Tool
- L (47)
- R (57)
Wiper Insert
Wiper Insert
- N (104)
- Y (44)
F Dimension
F Dimension
- 17.0 mm(20)
- 18.276 mm(1)
- 22.0 mm(21)
- 23.0 mm(2)
- 23.276 mm(1)
- 27.0 mm(27)
- 28.276 mm(1)
- 28.675 mm(1)
- 35.0 mm(27)
- 36.275 mm(1)
- 36.676 mm(1)
- 36.975 mm(1)
to
F Dimension
F Dimension
- 0.669 in(20)
- 0.72 in(1)
- 0.866 in(21)
- 0.906 in(2)
- 0.916 in(1)
- 1.063 in(27)
- 1.113 in(1)
- 1.129 in(1)
- 1.379 in(27)
- 1.428 in(1)
- 1.444 in(1)
- 1.456 in(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 32.0 mm(19)
- 33.0 mm(2)
- 40.0 mm(24)
- 50.0 mm(29)
- 63.0 mm(30)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.26 in(19)
- 1.299 in(2)
- 1.575 in(24)
- 1.969 in(29)
- 2.48 in(30)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 393.661 in(10)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 9999.0 mm(10)
to
Cutting Direction
Cutting Direction
- B (32)
- E (52)
- P (2)
- S (18)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (61)
- NEGATIVE-ZERO (30)
- NEUTRAL (ZERO) (13)
Maximum Bore Depth
Maximum Bore Depth
- 3.938 in(21)
- 5.039 in(24)
- 6.299 in(29)
- 7.875 in(30)
to
Maximum Bore Depth
Maximum Bore Depth
- 100.0 mm(21)
- 128.0 mm(24)
- 160.0 mm(29)
- 200.0 mm(30)
to
Front-End
Clamp Style
Clamp Style
- D (28)
- N (11)
- P (26)
- S (39)
Cutting Width
Cutting Width
- 0.039 in(8)
- 0.047 in(8)
- 0.06 in(8)
- 0.062 in(8)
- 0.069 in(8)
- 0.073 in(8)
- 0.078 in(8)
- 0.079 in(8)
- 0.088 in(8)
- 0.089 in(5)
- 0.094 in(3)
- 0.095 in(8)
- 0.097 in(8)
- 0.098 in(8)
- 0.105 in(8)
- 0.108 in(8)
- 0.11 in(8)
- 0.119 in(10)
- 0.122 in(8)
- 0.125 in(10)
- 0.126 in(8)
- 0.128 in(8)
- 0.131 in(3)
- 0.138 in(10)
- 0.143 in(8)
- 0.156 in(8)
- 0.157 in(10)
- 0.167 in(10)
- 0.177 in(10)
- 0.178 in(8)
- 0.185 in(8)
- 0.188 in(10)
- 0.189 in(10)
- 0.192 in(3)
- 0.193 in(3)
- 0.195 in(8)
- 0.196 in(8)
- 0.197 in(2)
- 0.213 in(2)
- 0.217 in(2)
- 0.237 in(2)
- 0.25 in(2)
- 0.256 in(2)
- 0.384 in(1)
to
Cutting Width
Cutting Width
- 1.0 mm(8)
- 1.201 mm(8)
- 1.5 mm(8)
- 1.576 mm(8)
- 1.75 mm(8)
- 1.826 mm(8)
- 1.975 mm(8)
- 2.0 mm(8)
- 2.2 mm(8)
- 2.225 mm(8)
- 2.25 mm(5)
- 2.375 mm(3)
- 2.401 mm(8)
- 2.475 mm(8)
- 2.5 mm(8)
- 2.676 mm(8)
- 2.75 mm(8)
- 2.801 mm(8)
- 3.0 mm(10)
- 3.1 mm(8)
- 3.176 mm(10)
- 3.2 mm(8)
- 3.25 mm(8)
- 3.325 mm(3)
- 3.5 mm(10)
- 3.6 mm(8)
- 3.95 mm(8)
- 3.975 mm(3)
- 4.0 mm(10)
- 4.25 mm(10)
- 4.5 mm(10)
- 4.525 mm(8)
- 4.7 mm(8)
- 4.775 mm(10)
- 4.801 mm(10)
- 4.875 mm(3)
- 4.9 mm(3)
- 4.95 mm(8)
- 4.976 mm(8)
- 5.0 mm(2)
- 5.4 mm(2)
- 5.5 mm(2)
- 6.0 mm(2)
- 6.351 mm(2)
- 6.5 mm(2)
- 9.75 mm(1)
to
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (26)
- D-DIAMOND/RHOMBIC 55 (28)
- LT-TRIANGLE LAY DOWN THREAD 60 (7)
- T-TRIANGLE 60 (18)
- TN-TOP NOTCH (11)
- V-DIAMOND/RHOMBIC 35 (10)
- W-TRIGON 80 (4)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.098 in(2)
- 0.11 in(2)
- 0.13 in(2)
- 0.146 in(2)
- 0.178 in(4)
- 0.193 in(2)
- 0.197 in(1)
- 0.238 in(4)
- 0.277 in(8)
- 0.395 in(12)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 2.5 mm(2)
- 2.801 mm(2)
- 3.301 mm(2)
- 3.7 mm(2)
- 4.525 mm(4)
- 4.9 mm(2)
- 5.0 mm(1)
- 6.025 mm(4)
- 7.025 mm(8)
- 10.025 mm(12)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (70)
- B L (69)
- C A (46)
- C N (44)
- D P (72)
- H T (81)
- H W (104)
Back-End
Back-End Diameter
Back-End Diameter
- 25.0 mm(21)
- 32.0 mm(24)
- 40.0 mm(29)
- 50.0 mm(30)
to
Back-End Diameter
Back-End Diameter
- 0.984 in(21)
- 1.26 in(24)
- 1.575 in(29)
- 1.969 in(30)
to
No filters matching ""
