KTMDU11 Series • Carbide Insert • 60° Partial Profile
Product Similar To :
Back To |
KTMDU11 Series • Carbide Insert • 60° Partial Profile
Thread milling cutter for multiple material
Material Number100034418
Contact our sales team to discover all of your pricing options
Features and benefits
- Smooth Cutting Action.
- Reduced load on the cutting edges due to single-point insert.
- Low cutting forces enable fast machining.
- Suitable for hard material applications.
- Wide range of applications, with partial profile insert (60°/55°).
- Cost-Effective Solution.
- Up to three cutting edges per insert.
- Very high feed per tooth.
KTMD • 1/4" IC
| Materials | Brinell | surface speeds | indexable inserts | |
| steel | HB | KC610M | KC635M | feed fz (mm/tooth) |
| P1 | 125 | 100–210 | 90–180 | 0,05–0,20 |
| P2 | 180 | 100–170 | 90–160 | 0,05–0,20 |
| P3 | 225 | 60–130 | 70–115 | 0,05–0,20 |
| P4 | 250 | 80–150 | 80–160 | 0,05–0,20 |
| P5 | 275 | 75–130 | 80–160 | 0,05–0,15 |
| P6 | 325 | 70–110 | 60–100 | 0,05–0,10 |
| stainless steel | ||||
| M1 | 180 | 100–170 | 120–180 | 0,05–0,10 |
| M2 | 250 | 70–140 | 100–140 | 0,05–0,10 |
| M3 | 330 | 70–120 | 100–120 | 0,05–0,10 |
| cast iron | ||||
| K1 | 180 | 60–130 | 100–120 | 0,02–0,08 |
| K2 | 220 | 60–125 | 80–100 | 0,05–0,15 |
| K3 | 260 | 50–90 | 60–90 | 0,05–0,10 |
| non-ferrous | ||||
| N1 | 60–100 | 100–250 | – | 0,05–0,25 |
| high-temp alloys | ||||
| S1 | 200 | 20–45 | 20–40 | 0,05–0,10 |
| S2 | 250 | 20–30 | 20–30 | 0,02–0,05 |
| S3 | 280 | 15–20 | 15–20 | 0,02–0,05 |
| S4 | 350 | 10–15 | 10–15 | 0,02–0,05 |
| hardened steel | ||||
| H1 | 55 HRC | 20–45 | 20–45 | 0,01–0,03 |