Carbide Boring Bars
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (162)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(162)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(162)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(162)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(162)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(162)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(162)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(162)
- M Stainless Steel (162)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(162)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(162)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(162)
- K Cast Iron (162)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(162)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(162)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(162)
- N Non-Ferrous Materials (158)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (158)
- N7MMC's (123)
- N1Wrought Aluminum (158)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(158)
- N3High-Silicon Aluminum Alloys Si >12.2%(118)
- N6Carbon, Graphite Composites, CFRP (153)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (158)
- S High-Temp Alloys (162)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(162)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(162)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(162)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(162)
- H Hardened Materials (118)
- H3Hardened Materials 56-60 HRC(118)
- H4Hardened Materials >60 HRC(118)
- H1Hardened Materials 44-48 HRC(118)
- H2Hardened Materials 48-55 HRC(118)
Select First Choice
- US (7)
Applications
Applications
Facing (1)
ID Facing (1)
Multiple Direction Cutting (162)
Profiling (144)
TRN Boring (151)
Turning (1)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (29)
- 93.0 (27)
- 95.0 (102)
- 97.0 (4)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (9)
- 1.0 (118)
- 2.0 (101)
- 3.0 (61)
- 4.0 (35)
to
Over All Length [L]
Over All Length [L]
- 2.375 in(2)
- 2.5 in(2)
- 2.75 in(1)
- 3.0 in(1)
- 3.375 in(2)
- 3.937 in(1)
- 3.95 in(4)
- 3.96 in(3)
- 4.0 in(15)
- 4.375 in(1)
- 4.85 in(2)
- 4.8524 in(2)
- 4.8917 in(1)
- 4.9114 in(1)
- 5.0 in(5)
- 5.876 in(1)
- 5.906 in(1)
- 5.9547 in(4)
- 6.0 in(41)
- 7.0374 in(1)
- 7.0571 in(2)
- 7.0866 in(2)
- 7.1358 in(2)
- 7.874 in(2)
- 7.9311 in(2)
- 7.9746 in(2)
- 8.0 in(12)
- 9.8996 in(5)
- 10.0 in(32)
- 12.0 in(10)
to
Over All Length [L]
Over All Length [L]
- 60.32 mm(2)
- 63.5 mm(2)
- 69.85 mm(1)
- 76.2 mm(1)
- 85.72 mm(2)
- 100.0 mm(1)
- 100.33 mm(4)
- 100.58 mm(3)
- 101.6 mm(15)
- 111.12 mm(1)
- 123.19 mm(2)
- 123.25 mm(2)
- 124.25 mm(1)
- 124.75 mm(1)
- 127.0 mm(5)
- 149.25 mm(1)
- 150.0 mm(1)
- 151.25 mm(4)
- 152.4 mm(41)
- 178.75 mm(1)
- 179.25 mm(2)
- 180.0 mm(2)
- 181.25 mm(2)
- 200.0 mm(2)
- 201.45 mm(2)
- 202.555 mm(2)
- 203.2 mm(12)
- 251.45 mm(5)
- 253.995 mm(2)
- 254.0 mm(30)
- 304.8 mm(10)
to
Corner Radius
Corner Radius
- 0.0 in(9)
- 0.001 in(9)
- 0.002 in(64)
- 0.004 in(86)
- 0.007 in(55)
- 0.008 in(98)
- 0.015 in(55)
- 0.016 in(103)
- 0.031 in(100)
- 0.047 in(27)
- 0.063 in(5)
to
Corner Radius
Corner Radius
- 0.0 mm(9)
- 0.025 mm(9)
- 0.05 mm(64)
- 0.1 mm(86)
- 0.175 mm(55)
- 0.2 mm(98)
- 0.375 mm(55)
- 0.4 mm(103)
- 0.775 mm(12)
- 0.8 mm(88)
- 1.2 mm(27)
- 1.6 mm(5)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- K00379 (54)
- K313 (105)
- K68 (48)
- KB1345 (28)
- KB1610 (37)
- KB1630 (32)
- KB5610 (14)
- KB5630 (35)
- KBH10 (9)
- KBH20 (67)
- KC5010 (162)
- KC5025 (154)
- KC5410 (79)
- KC730 (157)
- KC850 (95)
- KCK05 (45)
- KCK05B (4)
- KCK15 (45)
- KCK15B (59)
- KCK20 (73)
- KCK20B (42)
- KCM15 (64)
- KCM15B (46)
- KCM25 (76)
- KCM25B (65)
- KCM25S (9)
- KCM35 (18)
- KCM35B (5)
- KCP05 (35)
- KCP05B (5)
- KCP10 (73)
- KCP10B (84)
- KCP20S (9)
- KCP25 (81)
- KCP25B (87)
- KCP25C (95)
- KCP30 (35)
- KCPK05 (17)
- KCS10 (91)
- KCS10B (72)
- KCS25S (9)
- KCU10 (150)
- KCU10B (156)
- KCU25 (137)
- KCU25B (155)
- KD1400 (118)
- KD1405 (32)
- KD1425 (118)
- KN10S (9)
- KT315 (140)
- KT325 (9)
- KTP10 (41)
- KTP25S (9)
Hand Of Tool
Hand Of Tool
- L (55)
- R (107)
Wiper Insert
Wiper Insert
- N (162)
- Y (49)
F Dimension
F Dimension
- 2.41 mm(4)
- 2.64 mm(5)
- 2.82 mm(3)
- 2.97 mm(4)
- 3.02 mm(6)
- 3.18 mm(1)
- 3.2 mm(2)
- 3.43 mm(2)
- 3.63 mm(1)
- 3.68 mm(7)
- 3.71 mm(2)
- 3.73 mm(5)
- 3.86 mm(2)
- 3.96 mm(5)
- 4.42 mm(2)
- 4.7 mm(5)
- 4.75 mm(3)
- 4.8 mm(2)
- 5.36 mm(1)
- 5.563 mm(6)
- 5.59 mm(1)
- 5.791 mm(1)
- 5.875 mm(4)
- 6.35 mm(10)
- 6.55 mm(1)
- 6.6 mm(1)
- 6.875 mm(5)
- 6.93 mm(1)
- 7.925 mm(9)
- 8.875 mm(5)
- 9.0 mm(2)
- 9.525 mm(2)
- 10.312 mm(10)
- 10.315 mm(2)
- 10.875 mm(4)
- 11.0 mm(2)
- 11.1 mm(2)
- 12.7 mm(14)
- 12.875 mm(5)
- 14.275 mm(3)
- 15.875 mm(2)
- 16.256 mm(6)
- 19.05 mm(2)
to
F Dimension
F Dimension
- 0.095 in(4)
- 0.104 in(5)
- 0.111 in(3)
- 0.117 in(4)
- 0.119 in(6)
- 0.125 in(1)
- 0.126 in(2)
- 0.135 in(2)
- 0.143 in(1)
- 0.145 in(7)
- 0.146 in(2)
- 0.147 in(5)
- 0.152 in(2)
- 0.156 in(5)
- 0.174 in(2)
- 0.185 in(5)
- 0.187 in(3)
- 0.189 in(2)
- 0.211 in(1)
- 0.219 in(6)
- 0.22 in(1)
- 0.228 in(1)
- 0.2313 in(4)
- 0.25 in(10)
- 0.258 in(1)
- 0.26 in(1)
- 0.2707 in(5)
- 0.273 in(1)
- 0.312 in(9)
- 0.3494 in(5)
- 0.3543 in(2)
- 0.375 in(2)
- 0.406 in(12)
- 0.4281 in(3)
- 0.4331 in(2)
- 0.437 in(2)
- 0.4821 in(1)
- 0.5 in(14)
- 0.5069 in(5)
- 0.562 in(3)
- 0.625 in(2)
- 0.64 in(6)
- 0.75 in(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 4.57 mm(4)
- 5.28 mm(5)
- 5.54 mm(3)
- 5.69 mm(4)
- 5.94 mm(7)
- 6.6 mm(1)
- 6.78 mm(2)
- 6.9 mm(1)
- 6.98 mm(2)
- 7.06 mm(1)
- 7.08 mm(1)
- 7.09 mm(3)
- 7.1 mm(1)
- 7.24 mm(8)
- 7.42 mm(2)
- 7.52 mm(3)
- 8.15 mm(2)
- 8.8 mm(1)
- 8.81 mm(1)
- 9.04 mm(3)
- 9.05 mm(1)
- 9.09 mm(4)
- 9.14 mm(1)
- 9.2 mm(1)
- 10.5 mm(1)
- 10.541 mm(6)
- 10.95 mm(1)
- 11.0 mm(4)
- 11.125 mm(1)
- 12.192 mm(10)
- 12.9 mm(1)
- 13.0 mm(5)
- 13.67 mm(1)
- 15.24 mm(11)
- 16.0 mm(7)
- 18.542 mm(2)
- 19.55 mm(1)
- 19.558 mm(10)
- 19.56 mm(1)
- 20.0 mm(6)
- 21.59 mm(2)
- 23.622 mm(10)
- 24.892 mm(3)
- 25.0 mm(5)
- 25.4 mm(2)
- 30.226 mm(2)
- 30.48 mm(4)
- 30.988 mm(2)
- 33.02 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.18 in(4)
- 0.208 in(5)
- 0.218 in(3)
- 0.224 in(4)
- 0.234 in(7)
- 0.26 in(1)
- 0.267 in(2)
- 0.272 in(1)
- 0.275 in(2)
- 0.278 in(1)
- 0.279 in(4)
- 0.28 in(1)
- 0.285 in(8)
- 0.292 in(2)
- 0.296 in(3)
- 0.321 in(2)
- 0.346 in(1)
- 0.347 in(1)
- 0.356 in(4)
- 0.358 in(4)
- 0.36 in(1)
- 0.362 in(1)
- 0.413 in(1)
- 0.415 in(6)
- 0.431 in(1)
- 0.4331 in(4)
- 0.438 in(1)
- 0.48 in(10)
- 0.508 in(1)
- 0.5118 in(5)
- 0.538 in(1)
- 0.6 in(11)
- 0.6299 in(7)
- 0.73 in(2)
- 0.77 in(12)
- 0.7874 in(6)
- 0.85 in(2)
- 0.93 in(10)
- 0.98 in(3)
- 0.9843 in(5)
- 1.0 in(2)
- 1.19 in(2)
- 1.2 in(4)
- 1.22 in(2)
- 1.3 in(2)
to
Cutting Direction
Cutting Direction
- B (102)
- E (60)
Rake Angle Style
Rake Angle Style
- NEGATIVE-ZERO (81)
- NEUTRAL (ZERO) (26)
- POSITIVE-NEGATIVE (4)
- POSITIVE-ZERO (51)
Maximum Bore Depth
Maximum Bore Depth
- 0.875 in(3)
- 0.936 in(3)
- 0.942 in(1)
- 1.0 in(2)
- 1.122 in(4)
- 1.125 in(6)
- 1.182 in(5)
- 1.25 in(1)
- 1.416 in(8)
- 1.4172 in(1)
- 1.5 in(12)
- 1.872 in(5)
- 1.875 in(10)
- 1.89 in(9)
- 2.25 in(14)
- 2.3592 in(4)
- 2.3622 in(1)
- 2.364 in(1)
- 2.5 in(2)
- 2.8314 in(3)
- 2.832 in(2)
- 2.8344 in(3)
- 3.0 in(12)
- 3.75 in(14)
- 3.7758 in(1)
- 3.7794 in(5)
- 4.5 in(15)
- 4.7244 in(5)
- 6.0 in(10)
to
Maximum Bore Depth
Maximum Bore Depth
- 22.22 mm(3)
- 23.76 mm(3)
- 24.0 mm(1)
- 25.4 mm(2)
- 28.5 mm(1)
- 28.56 mm(3)
- 28.572 mm(6)
- 30.0 mm(5)
- 31.75 mm(1)
- 36.0 mm(9)
- 38.04 mm(3)
- 38.1 mm(9)
- 47.58 mm(5)
- 47.62 mm(2)
- 47.622 mm(2)
- 47.628 mm(6)
- 48.0 mm(9)
- 57.12 mm(2)
- 57.15 mm(12)
- 60.0 mm(6)
- 63.5 mm(2)
- 72.0 mm(8)
- 76.2 mm(12)
- 95.22 mm(2)
- 95.25 mm(12)
- 96.0 mm(6)
- 114.3 mm(15)
- 120.0 mm(5)
- 152.4 mm(10)
to
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (85)
- D-DIAMOND/RHOMBIC 55 (16)
- T-TRIANGLE 60 (40)
- W-TRIGON 80 (21)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.1135 in(1)
- 0.1832 in(2)
- 0.1838 in(2)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 2.884 mm(1)
- 4.655 mm(2)
- 4.667 mm(2)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (83)
- B L (121)
- D P (118)
- H T (140)
- H W (162)
Back-End
Back-End Diameter
Back-End Diameter
- 3.96 mm(3)
- 4.0 mm(1)
- 4.75 mm(1)
- 4.76 mm(3)
- 4.762 mm(6)
- 5.0 mm(5)
- 6.0 mm(9)
- 6.34 mm(3)
- 6.35 mm(9)
- 7.93 mm(5)
- 7.937 mm(2)
- 7.938 mm(6)
- 8.0 mm(9)
- 9.52 mm(2)
- 9.525 mm(12)
- 10.0 mm(6)
- 12.0 mm(12)
- 12.7 mm(15)
- 15.87 mm(3)
- 15.875 mm(12)
- 16.0 mm(8)
- 19.05 mm(15)
- 20.0 mm(5)
- 25.4 mm(10)
to
Shank Height
Shank Height
- 0.4492 in(7)
- 0.6067 in(6)
- 0.7642 in(5)
to
Shank Height
Shank Height
- 11.41 mm(7)
- 15.41 mm(6)
- 19.41 mm(5)
to
No filters matching ""
