KM™ Quick Change Tools
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (43)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(43)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(43)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(43)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(43)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(43)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(43)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(43)
- M Stainless Steel (43)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(43)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(43)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(43)
- K Cast Iron (43)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(43)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(43)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(43)
- N Non-Ferrous Materials (41)
- N1Wrought Aluminum (41)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(41)
- N3High-Silicon Aluminum Alloys Si >12.2%(28)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (41)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (34)
- N6Carbon, Graphite Composites, CFRP (34)
- N7MMC's (34)
- S High-Temp Alloys (43)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(43)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(43)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(43)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(43)
- H Hardened Materials (34)
- H1Hardened Materials 44-48 HRC(34)
- H2Hardened Materials 48-55 HRC(34)
- H3Hardened Materials 56-60 HRC(34)
- H4Hardened Materials >60 HRC(34)
Applications
Applications
Facing (43)
Multiple Direction Cutting (43)
Profiling (30)
TRN Boring (30)
Turning (43)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (43)
- Lightly Interrupted Cut (43)
- Smooth Cut (43)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 93.0 (10)
- 95.0 (33)
to
Connection Style
Connection Style
- KM (42)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (34)
- 2.0 (26)
- 3.0 (12)
- 4.0 (28)
- 6.0 (15)
- 8.0 (16)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 70.0 mm(2)
- 90.0 mm(14)
- 100.0 mm(1)
- 110.0 mm(2)
- 125.0 mm(6)
- 140.0 mm(13)
- 170.0 mm(5)
to
Corner Radius
Corner Radius
- 0.1 mm(34)
- 0.2 mm(32)
- 0.35 mm(6)
- 0.4 mm(43)
- 0.6 mm(12)
- 0.8 mm(43)
- 1.2 mm(41)
- 1.6 mm(34)
to
Application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (22)
- CW5025 (34)
- K060 (16)
- K313 (34)
- K68 (22)
- KB1340 (20)
- KB1345 (16)
- KB1610 (28)
- KB1630 (16)
- KB5610 (16)
- KB5630 (16)
- KBH10 (34)
- KBH10B (34)
- KBH20 (34)
- KBH20B (34)
- KC5010 (43)
- KC5025 (41)
- KC5410 (34)
- KC730 (30)
- KC850 (34)
- KCK05 (43)
- KCK05B (28)
- KCK15 (41)
- KCK15B (41)
- KCK20 (38)
- KCK20B (41)
- KCM15 (41)
- KCM15B (43)
- KCM25 (43)
- KCM25B (41)
- KCM35 (34)
- KCM35B (37)
- KCP05 (38)
- KCP05B (41)
- KCP10 (43)
- KCP10B (43)
- KCP25 (37)
- KCP25B (41)
- KCP25C (43)
- KCP30 (43)
- KCP30B (31)
- KCP40 (34)
- KCP40B (36)
- KCPK05 (38)
- KCS10 (16)
- KCS10B (38)
- KCU10 (43)
- KCU10B (43)
- KCU25 (41)
- KCU25B (41)
- KD1400 (16)
- KD1405 (16)
- KD1425 (28)
- KS15 (16)
- KT315 (41)
- KT325 (16)
- KTP10 (41)
- KTP25S (34)
- KY1540 (16)
- KY3500 (34)
- KY4300 (16)
- KY4400 (34)
- KYHK15B (34)
- KYK10 (16)
- KYK25 (28)
- KYS25 (16)
- KYS30 (28)
- PB100 (16)
- SP4019 (16)
- THM (16)
- THM-X (22)
- THMF-X (16)
- TN10P (36)
- TN10U (34)
- TN15M (34)
- TN15U (16)
- TN2000 (37)
- TN20K (34)
- TN20P (43)
- TN30M (37)
- TN30P (34)
- TN4000 (37)
- TN6010 (22)
- TTS (16)
- WBH10P (16)
- WBH10U (16)
- WBH20P (34)
- WBH30P (16)
- WDN00U (16)
- WDN25U (28)
- WK05CT (41)
- WK15CT (37)
- WK20CT (41)
- WM15CT (41)
- WM25CT (41)
- WM35CT (41)
- WP05CT (28)
- WP15CT (41)
- WP25CT (41)
- WP35CT (34)
- WS10PT (41)
- WS25PT (41)
- WU10HT (41)
- WU10PT (41)
- WU25PT (41)
- X00580 (16)
- X00581 (16)
- X00582 (16)
- X00583 (16)
- X00584 (16)
- X00585 (16)
- X00586 (16)
- X00591 (16)
- X00592 (16)
- X00593 (16)
- X00594 (16)
- X00596 (16)
- X00597 (16)
- X00599 (16)
Hand Of Tool
Hand Of Tool
- L (21)
- R (21)
Wiper Insert
Wiper Insert
- N (43)
- Y (41)
F Dimension
F Dimension
- 17.0 mm(21)
- 22.0 mm(9)
- 27.0 mm(8)
- 35.0 mm(4)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 32.0 mm(21)
- 40.0 mm(9)
- 50.0 mm(8)
- 63.0 mm(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 32.0 mm(22)
- 40.0 mm(9)
- 50.0 mm(8)
- 63.0 mm(4)
to
Cutting Direction
Cutting Direction
- B (32)
- E (10)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (42)
Maximum Bore Depth
Maximum Bore Depth
- 55.09 mm(2)
- 70.36 mm(1)
- 75.04 mm(1)
- 76.02 mm(2)
- 77.33 mm(8)
- 79.55 mm(1)
- 80.0 mm(2)
- 88.23 mm(3)
- 88.3 mm(2)
- 88.52 mm(2)
- 96.26 mm(1)
- 112.07 mm(6)
- 113.37 mm(1)
- 117.14 mm(4)
- 117.38 mm(1)
- 120.34 mm(2)
- 149.4 mm(4)
to
Boring Bar Material
Boring Bar Material
- S (42)
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (18)
- D-DIAMOND/RHOMBIC 55 (10)
- W-TRIGON 80 (15)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (32)
- B L (34)
- C A (34)
- C N (34)
- D P (34)
- H T (41)
- H W (43)
Back-End
Connection Type
Connection Type
- TAPER SHANK (42)
System Size
System Size
- KM32 (2)
- KM40TS (13)
- KM50TS (6)
- KM63TS (21)
Back-End Diameter
Back-End Diameter
- 32.0 mm(3)
- 40.0 mm(13)
- 50.0 mm(6)
- 63.0 mm(21)
to
No filters matching ""
