DUO-LOCK Modular End Mills • Corner Rounding and Chamfering Solid Carbide Tips
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (25)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(25)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(25)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(25)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(25)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(25)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(25)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(25)
- M Stainless Steel (25)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(25)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(25)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(25)
- K Cast Iron (25)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(25)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(25)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(25)
- N Non-Ferrous Materials (25)
- N1Wrought Aluminum (25)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(25)
- N3High-Silicon Aluminum Alloys Si >12.2%(25)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (25)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (25)
- N6Carbon, Graphite Composites, CFRP (25)
- N7MMC's (25)
- S High-Temp Alloys (25)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(25)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(25)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(25)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(25)
- H Hardened Materials (25)
- H1Hardened Materials 44-48 HRC(25)
Applications
Applications
Chamfer Milling (12)
Concave Radius Milling (13)
Shoulder Milling (3)
Cutting Diameter
Cutting Diameter
- 0.5 mm(12)
- 3.429 mm(1)
- 4.0 mm(1)
- 6.0 mm(1)
- 6.477 mm(1)
- 6.604 mm(1)
- 7.0 mm(1)
- 8.0 mm(2)
- 9.652 mm(1)
- 10.0 mm(2)
- 11.176 mm(1)
- 12.0 mm(1)
to
Maximum Cutting Diameter
Maximum Cutting Diameter
- 9.525 mm(4)
- 10.0 mm(4)
- 12.0 mm(5)
- 12.7 mm(5)
- 15.875 mm(2)
- 16.0 mm(5)
to
Cutting Length
Cutting Length
- 0.762 mm(1)
- 1.0 mm(1)
- 1.5 mm(1)
- 1.524 mm(2)
- 1.905 mm(1)
- 2.0 mm(4)
- 2.54 mm(2)
- 3.0 mm(5)
- 3.048 mm(2)
- 3.175 mm(2)
- 4.0 mm(3)
- 4.513 mm(1)
to
Reach
Reach
- 21.5 mm(2)
- 21.524 mm(1)
- 21.648 mm(1)
- 22.5 mm(1)
- 22.6 mm(2)
- 22.7 mm(1)
- 27.2 mm(5)
- 28.7 mm(2)
- 28.724 mm(1)
- 28.762 mm(1)
- 28.848 mm(1)
- 35.6 mm(2)
- 35.946 mm(1)
- 36.0 mm(2)
- 36.1 mm(1)
- 36.25 mm(1)
to
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (6)
- 60.0 (6)
- 90.0 (13)
to
Number of Flutes
Number of Flutes
- 4 (8)
- 5 (10)
- 6 (7)
Over All Length [L]
Over All Length [L]
- 33.9 mm(1)
- 34.0 mm(2)
- 34.148 mm(1)
- 35.0 mm(2)
- 35.1 mm(2)
- 42.0 mm(1)
- 42.2 mm(4)
- 43.6 mm(1)
- 43.7 mm(2)
- 43.72 mm(1)
- 43.848 mm(1)
- 55.6 mm(2)
- 56.0 mm(3)
- 56.1 mm(1)
- 56.25 mm(1)
to
Corner Style
Corner Style
- CHAMFER (12)
- RADIUS (13)
Corner Radius
Corner Radius
- 0.0 mm(12)
- 0.75 mm(1)
- 1.0 mm(1)
- 1.5 mm(1)
- 1.525 mm(2)
- 2.0 mm(2)
- 3.0 mm(3)
- 3.05 mm(2)
- 4.0 mm(1)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(13)
- 1.905 mm(1)
- 2.0 mm(2)
- 2.54 mm(2)
- 3.0 mm(2)
- 3.175 mm(2)
- 4.0 mm(2)
- 4.513 mm(1)
to
Back-End
Back-End Diameter
Back-End Diameter
- 9.125 mm(2)
- 9.525 mm(2)
- 10.0 mm(4)
- 12.0 mm(5)
- 12.2 mm(5)
- 15.375 mm(2)
- 16.0 mm(5)
to
No filters matching ""
