Cut-Off, Groove and Turn
Kennametal grooving and cut-off tools are known for high performance and rigidity. Designed to meet your specific needs and provide reliable, efficient cutting performance, Kennametal’s full line of grooving, cut-off, and face-grooving solutions provides the capabilities for machining narrow areas, cutting shallow grooves, deep grooves, and cutting off a variety of workpiece materials. Whether you're facing complex grooving requirements or need to make precise cuts, Kennametal's line of grooving and cut-off tools have you covered.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (4597)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(4597)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(4597)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(4597)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(4597)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(4597)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(4597)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(4597)
- M Stainless Steel (4541)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(4541)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(4541)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(4541)
- K Cast Iron (4010)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(4010)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(4001)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(3989)
- N Non-Ferrous Materials (4135)
- N1Wrought Aluminum (4127)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(3942)
- N3High-Silicon Aluminum Alloys Si >12.2%(291)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (4135)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (3950)
- N6Carbon, Graphite Composites, CFRP (3942)
- N7MMC's (204)
- S High-Temp Alloys (4588)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(4588)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(4588)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(4588)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(4575)
- H Hardened Materials (2334)
- H1Hardened Materials 44-48 HRC(2334)
- H2Hardened Materials 48-55 HRC(1803)
- H3Hardened Materials 56-60 HRC(397)
- H4Hardened Materials >60 HRC(397)
Select First Choice
- BR (67)
- CN (474)
- DE (501)
- GB (290)
- IN (136)
- SG (239)
- US (597)
Applications
Applications
Back Boring (1118)
Boring (2581)
CRT Profiling (2)
Chamfer Turning (69)
Cut-Off (1619)
Deep Grooving (141)
Drilling (1)
Face Grooving (4148)
Facing (1253)
Grooving (4487)
ID Facing (1133)
ID Grooving (3275)
ID Thread Turning (69)
Multiple Direction Cutting (580)
OD Thread Turning (128)
Plunge Turning (2423)
Turning (2495)
Cutting Length
Cutting Length
- 26.0 mm(1)
- 32.0 mm(3)
to
Cutting Length
Cutting Length
- 1.0236 in(1)
to
Type of Thread
Type of Thread
- 60 (188)
- ACME (123)
- API (115)
- API RD (82)
- BSW (79)
- BUTTRESS (183)
- M (41)
- NPT (79)
- STUB ACME (79)
- UN (183)
- UNJ (79)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (4002)
- Lightly Interrupted Cut (4603)
- Smooth Cut (5053)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (21)
- 90.0 (1562)
- 92.25 (2)
to
Connection Style
Connection Style
- Bolt-On Head (6)
- Boring Bar Shank (186)
- Cutoff Support Blade A1-A3 (88)
- Toolholder (862)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (2471)
- 2.0 (3024)
to
Over All Length [L]
Over All Length [L]
- 0.7952 in(1)
- 0.992 in(2)
- 1.625 in(6)
- 1.88 in(46)
- 1.954 in(4)
- 2.037 in(40)
- 2.077 in(31)
- 2.111 in(37)
- 2.155 in(47)
- 2.156 in(4)
- 2.1654 in(1)
- 2.19 in(2)
- 2.1917 in(1)
- 2.1949 in(2)
- 2.195 in(48)
- 2.2687 in(21)
- 2.273 in(4)
- 2.342 in(1)
- 2.347 in(9)
- 2.352 in(15)
- 2.4309 in(8)
- 2.431 in(20)
- 2.4311 in(2)
- 2.5 in(4)
- 2.583 in(2)
- 2.5835 in(1)
- 2.667 in(4)
- 2.6672 in(7)
- 2.6673 in(11)
- 2.756 in(2)
- 2.9528 in(2)
- 3.0709 in(4)
- 3.15 in(2)
- 3.3858 in(11)
- 3.396 in(2)
- 3.5 in(4)
- 3.5433 in(8)
- 3.5512 in(2)
- 3.553 in(4)
- 3.937 in(4)
- 3.9449 in(1)
- 4.0 in(3)
- 4.3307 in(18)
- 4.331 in(2)
- 4.3386 in(2)
- 4.34 in(1)
- 4.3404 in(2)
- 4.3406 in(13)
- 4.341 in(17)
- 4.3425 in(1)
- 4.5 in(150)
- 4.921 in(118)
- 4.9213 in(66)
- 4.9214 in(1)
- 4.9234 in(1)
- 4.931 in(4)
- 4.9311 in(4)
- 4.9331 in(12)
- 4.934 in(2)
- 4.967 in(7)
- 5.0 in(42)
- 5.118 in(2)
- 5.1181 in(4)
- 5.315 in(3)
- 5.3267 in(2)
- 5.3486 in(2)
- 5.372 in(4)
- 5.3939 in(4)
- 5.463 in(4)
- 5.508 in(12)
- 5.905 in(2)
- 5.9055 in(41)
- 5.906 in(158)
- 5.9114 in(1)
- 5.913 in(1)
- 5.9134 in(2)
- 5.915 in(16)
- 5.9152 in(2)
- 5.9153 in(3)
- 5.9154 in(2)
- 5.9173 in(7)
- 5.918 in(2)
- 5.951 in(9)
- 5.961 in(10)
- 6.0 in(280)
- 6.1141 in(2)
- 6.136 in(2)
- 6.25 in(4)
- 6.3721 in(2)
- 6.3939 in(2)
- 6.6929 in(10)
- 6.693 in(48)
- 6.703 in(4)
- 6.738 in(6)
- 7.0 in(15)
- 7.079 in(2)
- 7.087 in(12)
- 7.874 in(42)
- 7.9311 in(7)
- 7.976 in(1)
- 8.0 in(6)
- 8.01 in(2)
- 8.0118 in(4)
- 8.018 in(2)
- 8.019 in(2)
- 8.02 in(3)
- 9.8425 in(8)
- 9.843 in(12)
- 9.879 in(1)
- 10.0 in(8)
- 10.02 in(3)
- 10.024 in(1)
- 10.236 in(2)
- 10.242 in(1)
- 11.811 in(14)
- 12.0 in(9)
- 12.02 in(3)
- 12.024 in(2)
- 13.7795 in(1)
- 14.0 in(10)
- 16.0 in(10)
to
Over All Length [L]
Over All Length [L]
- 20.198 mm(1)
- 25.198 mm(2)
- 41.275 mm(6)
- 47.75 mm(46)
- 49.62 mm(4)
- 51.75 mm(40)
- 52.746 mm(11)
- 52.75 mm(20)
- 53.62 mm(37)
- 54.75 mm(50)
- 54.751 mm(1)
- 55.0 mm(1)
- 55.62 mm(2)
- 55.67 mm(1)
- 55.75 mm(50)
- 57.6129 mm(2)
- 57.6229 mm(19)
- 57.75 mm(4)
- 59.5 mm(1)
- 59.62 mm(9)
- 59.75 mm(15)
- 61.746 mm(8)
- 61.75 mm(22)
- 63.5 mm(4)
- 65.62 mm(3)
- 67.746 mm(7)
- 67.75 mm(15)
- 70.0 mm(2)
- 75.0 mm(2)
- 78.0 mm(4)
- 80.0 mm(2)
- 86.0 mm(11)
- 86.25 mm(2)
- 88.9 mm(4)
- 90.0 mm(8)
- 90.2 mm(2)
- 90.25 mm(4)
- 100.0 mm(4)
- 100.2 mm(1)
- 101.6 mm(3)
- 110.0 mm(20)
- 110.2 mm(2)
- 110.25 mm(32)
- 110.251 mm(1)
- 110.3 mm(1)
- 114.3 mm(150)
- 125.0 mm(195)
- 125.25 mm(8)
- 125.3 mm(12)
- 127.0 mm(42)
- 130.0 mm(6)
- 135.0 mm(3)
- 135.299 mm(2)
- 135.855 mm(2)
- 136.449 mm(4)
- 137.004 mm(4)
- 138.75 mm(4)
- 139.9 mm(11)
- 139.903 mm(1)
- 150.0 mm(212)
- 150.15 mm(1)
- 150.2 mm(3)
- 150.245 mm(2)
- 150.248 mm(1)
- 150.25 mm(18)
- 150.251 mm(2)
- 150.3 mm(7)
- 151.4 mm(10)
- 152.4 mm(280)
- 155.299 mm(2)
- 155.855 mm(2)
- 158.75 mm(4)
- 161.852 mm(2)
- 162.404 mm(2)
- 170.0 mm(64)
- 170.25 mm(4)
- 177.8 mm(15)
- 179.8 mm(2)
- 180.0 mm(12)
- 200.0 mm(42)
- 201.45 mm(7)
- 202.591 mm(1)
- 203.2 mm(5)
- 203.5 mm(4)
- 203.67 mm(6)
- 203.7 mm(4)
- 250.0 mm(20)
- 250.927 mm(1)
- 254.0 mm(8)
- 254.5 mm(3)
- 254.6 mm(1)
- 260.0 mm(2)
- 260.15 mm(1)
- 300.0 mm(14)
- 304.8 mm(9)
- 305.3 mm(3)
- 305.4 mm(2)
- 350.0 mm(1)
- 355.6 mm(10)
- 406.4 mm(10)
to
Corner Radius
Corner Radius
- 0.0 in(256)
- 0.001 in(42)
- 0.002 in(41)
- 0.003 in(198)
- 0.004 in(412)
- 0.005 in(79)
- 0.006 in(205)
- 0.007 in(204)
- 0.008 in(2505)
- 0.009 in(79)
- 0.01 in(155)
- 0.011 in(41)
- 0.012 in(486)
- 0.013 in(233)
- 0.014 in(165)
- 0.015 in(2)
- 0.016 in(1507)
- 0.018 in(96)
- 0.019 in(41)
- 0.02 in(164)
- 0.023 in(380)
- 0.03 in(39)
- 0.031 in(1247)
- 0.032 in(9)
- 0.035 in(115)
- 0.039 in(368)
- 0.041 in(119)
- 0.042 in(78)
- 0.046 in(34)
- 0.047 in(540)
- 0.048 in(24)
- 0.049 in(38)
- 0.059 in(501)
- 0.061 in(323)
- 0.062 in(338)
- 0.063 in(608)
- 0.065 in(239)
- 0.069 in(38)
- 0.078 in(98)
- 0.079 in(349)
- 0.081 in(74)
- 0.082 in(197)
- 0.094 in(440)
- 0.096 in(196)
- 0.098 in(264)
- 0.099 in(54)
- 0.1 in(170)
- 0.101 in(245)
- 0.109 in(1)
- 0.118 in(205)
- 0.119 in(57)
- 0.12 in(132)
- 0.121 in(208)
- 0.125 in(289)
- 0.128 in(139)
- 0.156 in(63)
- 0.157 in(63)
- 0.158 in(60)
- 0.16 in(72)
- 0.188 in(14)
- 0.197 in(16)
- 0.198 in(13)
- 0.2 in(18)
to
Corner Radius
Corner Radius
- 0.0 mm(256)
- 0.025 mm(42)
- 0.05 mm(41)
- 0.075 mm(198)
- 0.1 mm(412)
- 0.125 mm(79)
- 0.15 mm(205)
- 0.175 mm(204)
- 0.2 mm(2505)
- 0.225 mm(79)
- 0.25 mm(155)
- 0.275 mm(41)
- 0.3 mm(486)
- 0.325 mm(233)
- 0.35 mm(165)
- 0.375 mm(2)
- 0.4 mm(1507)
- 0.45 mm(96)
- 0.475 mm(41)
- 0.5 mm(164)
- 0.575 mm(380)
- 0.75 mm(39)
- 0.775 mm(228)
- 0.8 mm(1019)
- 0.825 mm(9)
- 0.9 mm(115)
- 1.0 mm(368)
- 1.05 mm(119)
- 1.075 mm(78)
- 1.175 mm(34)
- 1.2 mm(540)
- 1.225 mm(24)
- 1.25 mm(38)
- 1.5 mm(501)
- 1.55 mm(323)
- 1.575 mm(338)
- 1.6 mm(608)
- 1.65 mm(239)
- 1.75 mm(38)
- 1.975 mm(98)
- 2.0 mm(349)
- 2.05 mm(74)
- 2.075 mm(197)
- 2.375 mm(267)
- 2.4 mm(173)
- 2.45 mm(196)
- 2.5 mm(264)
- 2.525 mm(54)
- 2.55 mm(170)
- 2.575 mm(245)
- 2.775 mm(1)
- 3.0 mm(205)
- 3.025 mm(57)
- 3.05 mm(132)
- 3.075 mm(208)
- 3.175 mm(289)
- 3.25 mm(139)
- 3.95 mm(41)
- 3.975 mm(22)
- 4.0 mm(63)
- 4.025 mm(60)
- 4.075 mm(72)
- 4.775 mm(14)
- 5.0 mm(16)
- 5.025 mm(13)
- 5.075 mm(18)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(4285)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(4285)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (1458)
- K420 (207)
- K68 (304)
- KB1630 (391)
- KBH20 (303)
- KC5010 (789)
- KC5025 (956)
- KC5410 (113)
- KC720 (214)
- KC730 (410)
- KC850 (329)
- KC9110 (19)
- KCK20 (447)
- KCK20B (1140)
- KCM35B (737)
- KCP10 (393)
- KCP10B (1200)
- KCP25 (394)
- KCP25B (1256)
- KCP25C (1082)
- KCS10B (700)
- KCU10 (1885)
- KCU10B (1917)
- KCU25 (2273)
- KCU25B (2312)
- KD1405 (204)
- KD1425 (87)
- KMF (31)
- KMS (103)
- KT315 (502)
- KY3500 (288)
- KY4300 (7)
- KYS30 (133)
Hand Of Tool
Hand Of Tool
- L (534)
- N (62)
- N - Neutral (3)
- R (595)
Wiper Insert
Wiper Insert
- N (5144)
F Dimension
F Dimension
- 1.25 mm(3)
- 1.275 mm(3)
- 1.45 mm(2)
- 1.825 mm(10)
- 2.7 mm(3)
- 3.7 mm(2)
- 5.475 mm(6)
- 5.975 mm(6)
- 6.553 mm(2)
- 7.0 mm(2)
- 7.95 mm(3)
- 8.17 mm(1)
- 8.23 mm(2)
- 8.52 mm(4)
- 9.0 mm(4)
- 9.52 mm(2)
- 9.53 mm(6)
- 9.627 mm(2)
- 9.76 mm(1)
- 10.0 mm(7)
- 10.125 mm(1)
- 10.23 mm(1)
- 10.24 mm(1)
- 10.312 mm(1)
- 10.785 mm(1)
- 10.973 mm(2)
- 11.0 mm(9)
- 11.06 mm(7)
- 11.1 mm(2)
- 11.99 mm(2)
- 12.0 mm(17)
- 12.02 mm(2)
- 12.09 mm(2)
- 12.1 mm(2)
- 12.125 mm(1)
- 12.14 mm(2)
- 12.17 mm(2)
- 12.2 mm(4)
- 12.22 mm(1)
- 12.36 mm(4)
- 12.573 mm(2)
- 12.7 mm(24)
- 12.72 mm(2)
- 12.73 mm(3)
- 12.74 mm(2)
- 12.75 mm(4)
- 12.79 mm(2)
- 12.8 mm(2)
- 12.802 mm(2)
- 12.81 mm(2)
- 12.85 mm(4)
- 12.91 mm(2)
- 12.929 mm(2)
- 12.95 mm(4)
- 13.0 mm(15)
- 13.03 mm(2)
- 13.94 mm(2)
- 13.97 mm(4)
- 14.0 mm(2)
- 14.148 mm(2)
- 14.27 mm(1)
- 14.275 mm(3)
- 15.875 mm(2)
- 15.88 mm(10)
- 15.92 mm(1)
- 15.97 mm(6)
- 16.0 mm(12)
- 16.02 mm(5)
- 16.09 mm(2)
- 16.1 mm(1)
- 16.125 mm(2)
- 16.14 mm(4)
- 16.2 mm(7)
- 16.22 mm(2)
- 16.25 mm(2)
- 16.256 mm(2)
- 16.36 mm(2)
- 16.871 mm(1)
- 16.873 mm(4)
- 17.0 mm(14)
- 17.3 mm(6)
- 17.348 mm(2)
- 17.475 mm(2)
- 17.48 mm(2)
- 17.5 mm(2)
- 19.03 mm(1)
- 19.05 mm(10)
- 19.08 mm(13)
- 19.084 mm(5)
- 19.101 mm(1)
- 19.13 mm(20)
- 19.134 mm(6)
- 19.152 mm(1)
- 19.2 mm(5)
- 19.203 mm(1)
- 19.205 mm(1)
- 19.207 mm(1)
- 19.21 mm(11)
- 19.2106 mm(1)
- 19.23 mm(4)
- 19.234 mm(3)
- 19.253 mm(2)
- 19.3 mm(2)
- 19.406 mm(4)
- 19.431 mm(1)
- 20.0 mm(10)
- 20.06 mm(16)
- 20.1 mm(3)
- 20.11 mm(34)
- 20.178 mm(2)
- 20.179 mm(1)
- 20.18 mm(5)
- 20.181 mm(7)
- 20.182 mm(3)
- 20.183 mm(2)
- 20.19 mm(7)
- 20.2 mm(15)
- 20.21 mm(6)
- 20.25 mm(3)
- 20.3 mm(2)
- 20.36 mm(4)
- 21.13 mm(4)
- 21.77 mm(1)
- 21.8 mm(1)
- 22.0 mm(10)
- 22.225 mm(3)
- 22.61 mm(2)
- 25.0 mm(6)
- 25.06 mm(16)
- 25.11 mm(32)
- 25.18 mm(26)
- 25.182 mm(2)
- 25.183 mm(3)
- 25.184 mm(5)
- 25.185 mm(12)
- 25.19 mm(18)
- 25.2 mm(8)
- 25.204 mm(2)
- 25.206 mm(1)
- 25.21 mm(26)
- 25.2106 mm(1)
- 25.3 mm(4)
- 25.335 mm(2)
- 25.34 mm(2)
- 25.36 mm(1)
- 25.4 mm(12)
- 25.43 mm(16)
- 25.48 mm(24)
- 25.484 mm(5)
- 25.485 mm(2)
- 25.499 mm(1)
- 25.54 mm(1)
- 25.55 mm(8)
- 25.557 mm(1)
- 25.558 mm(2)
- 25.559 mm(5)
- 25.56 mm(52)
- 25.578 mm(2)
- 25.58 mm(23)
- 25.581 mm(2)
- 25.584 mm(3)
- 25.585 mm(1)
- 25.71 mm(5)
- 25.756 mm(4)
- 25.77 mm(1)
- 25.875 mm(1)
- 26.0 mm(4)
- 27.0 mm(4)
- 27.9 mm(1)
- 28.575 mm(1)
- 29.87 mm(3)
- 30.0 mm(8)
- 30.4 mm(1)
- 30.8 mm(1)
- 31.0 mm(2)
- 31.497 mm(2)
- 31.75 mm(25)
- 31.83 mm(12)
- 31.91 mm(8)
- 31.93 mm(8)
- 31.933 mm(1)
- 31.934 mm(1)
- 31.935 mm(2)
- 32.0 mm(12)
- 32.06 mm(4)
- 32.08 mm(12)
- 32.15 mm(4)
- 32.16 mm(4)
- 32.18 mm(12)
- 32.31 mm(4)
- 32.41 mm(2)
- 32.537 mm(2)
- 32.66 mm(2)
- 33.1 mm(1)
- 34.875 mm(1)
- 34.925 mm(4)
- 35.0 mm(1)
- 35.1 mm(1)
- 35.4 mm(1)
- 38.1 mm(16)
- 38.28 mm(2)
- 38.41 mm(2)
- 38.76 mm(2)
- 38.9 mm(1)
- 39.1 mm(2)
- 40.0 mm(4)
- 40.18 mm(2)
- 40.31 mm(2)
- 40.66 mm(2)
- 41.275 mm(4)
- 50.8 mm(4)
to
F Dimension
F Dimension
- 0.0492 in(3)
- 0.05 in(2)
- 0.057 in(2)
- 0.0715 in(1)
- 0.0719 in(5)
- 0.072 in(4)
- 0.106 in(3)
- 0.146 in(2)
- 0.2155 in(1)
- 0.2156 in(5)
- 0.2353 in(6)
- 0.258 in(2)
- 0.276 in(2)
- 0.2982 in(1)
- 0.313 in(3)
- 0.3217 in(1)
- 0.324 in(2)
- 0.336 in(4)
- 0.354 in(4)
- 0.375 in(8)
- 0.379 in(2)
- 0.3843 in(1)
- 0.394 in(7)
- 0.399 in(1)
- 0.4028 in(1)
- 0.4031 in(1)
- 0.406 in(1)
- 0.4281 in(1)
- 0.432 in(2)
- 0.433 in(9)
- 0.436 in(7)
- 0.437 in(2)
- 0.472 in(19)
- 0.473 in(2)
- 0.476 in(2)
- 0.4764 in(2)
- 0.477 in(1)
- 0.478 in(2)
- 0.4791 in(2)
- 0.48 in(3)
- 0.4803 in(1)
- 0.4811 in(1)
- 0.4866 in(4)
- 0.495 in(2)
- 0.5 in(24)
- 0.501 in(2)
- 0.5012 in(3)
- 0.5016 in(2)
- 0.502 in(4)
- 0.5035 in(2)
- 0.504 in(4)
- 0.505 in(2)
- 0.5059 in(2)
- 0.506 in(2)
- 0.507 in(1)
- 0.508 in(2)
- 0.509 in(2)
- 0.51 in(4)
- 0.5118 in(6)
- 0.512 in(8)
- 0.513 in(2)
- 0.549 in(2)
- 0.55 in(4)
- 0.551 in(2)
- 0.557 in(2)
- 0.562 in(4)
- 0.625 in(12)
- 0.6268 in(1)
- 0.6287 in(4)
- 0.629 in(2)
- 0.63 in(13)
- 0.6307 in(1)
- 0.631 in(4)
- 0.633 in(2)
- 0.635 in(6)
- 0.637 in(1)
- 0.6378 in(6)
- 0.6386 in(2)
- 0.64 in(4)
- 0.6441 in(2)
- 0.664 in(1)
- 0.6643 in(2)
- 0.669 in(8)
- 0.6693 in(6)
- 0.681 in(6)
- 0.683 in(2)
- 0.688 in(4)
- 0.689 in(2)
- 0.7492 in(1)
- 0.75 in(10)
- 0.751 in(10)
- 0.7512 in(3)
- 0.7513 in(5)
- 0.752 in(1)
- 0.753 in(20)
- 0.7533 in(6)
- 0.754 in(1)
- 0.756 in(17)
- 0.7561 in(2)
- 0.7562 in(1)
- 0.757 in(4)
- 0.7572 in(3)
- 0.758 in(2)
- 0.76 in(2)
- 0.764 in(4)
- 0.765 in(1)
- 0.787 in(10)
- 0.7898 in(6)
- 0.79 in(10)
- 0.7913 in(3)
- 0.7917 in(14)
- 0.792 in(20)
- 0.794 in(3)
- 0.7944 in(3)
- 0.7945 in(7)
- 0.7946 in(5)
- 0.7949 in(7)
- 0.795 in(2)
- 0.7953 in(15)
- 0.7957 in(2)
- 0.796 in(4)
- 0.797 in(2)
- 0.7972 in(1)
- 0.7992 in(2)
- 0.8016 in(4)
- 0.832 in(4)
- 0.857 in(1)
- 0.86 in(1)
- 0.866 in(4)
- 0.8661 in(6)
- 0.875 in(3)
- 0.89 in(2)
- 0.984 in(6)
- 0.9866 in(4)
- 0.987 in(12)
- 0.9886 in(8)
- 0.989 in(24)
- 0.991 in(20)
- 0.9914 in(3)
- 0.9915 in(17)
- 0.9917 in(1)
- 0.992 in(34)
- 0.9921 in(6)
- 0.9923 in(2)
- 0.9924 in(1)
- 0.9925 in(5)
- 0.993 in(14)
- 0.9943 in(2)
- 0.995 in(1)
- 0.996 in(2)
- 0.9961 in(2)
- 0.997 in(2)
- 0.9974 in(2)
- 0.9984 in(1)
- 1.0 in(12)
- 1.001 in(12)
- 1.0012 in(4)
- 1.003 in(24)
- 1.0033 in(7)
- 1.0039 in(1)
- 1.006 in(61)
- 1.0062 in(2)
- 1.0063 in(4)
- 1.007 in(25)
- 1.0071 in(2)
- 1.0072 in(3)
- 1.0073 in(2)
- 1.012 in(2)
- 1.0122 in(3)
- 1.014 in(4)
- 1.015 in(1)
- 1.019 in(1)
- 1.0236 in(4)
- 1.063 in(4)
- 1.0984 in(1)
- 1.125 in(1)
- 1.176 in(4)
- 1.18 in(1)
- 1.1811 in(6)
- 1.1969 in(1)
- 1.2126 in(1)
- 1.2205 in(2)
- 1.24 in(2)
- 1.25 in(25)
- 1.253 in(12)
- 1.256 in(8)
- 1.257 in(8)
- 1.2572 in(2)
- 1.2573 in(2)
- 1.2598 in(3)
- 1.26 in(9)
- 1.262 in(4)
- 1.263 in(12)
- 1.266 in(8)
- 1.2669 in(2)
- 1.267 in(10)
- 1.272 in(4)
- 1.276 in(2)
- 1.281 in(2)
- 1.286 in(2)
- 1.3031 in(1)
- 1.3363 in(1)
- 1.373 in(1)
- 1.375 in(4)
- 1.378 in(1)
- 1.3819 in(1)
- 1.3937 in(1)
- 1.5 in(16)
- 1.507 in(2)
- 1.512 in(2)
- 1.526 in(2)
- 1.5315 in(1)
- 1.5394 in(2)
- 1.575 in(4)
- 1.582 in(2)
- 1.587 in(2)
- 1.601 in(2)
- 1.625 in(4)
- 2.0 in(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(152)
- 11.176 mm(1)
- 11.18 mm(1)
- 11.5 mm(2)
- 15.88 mm(4)
- 16.0 mm(8)
- 17.0 mm(3)
- 18.5 mm(2)
- 18.542 mm(4)
- 19.99 mm(1)
- 20.0 mm(17)
- 20.32 mm(1)
- 21.0 mm(3)
- 22.0 mm(3)
- 24.994 mm(1)
- 25.0 mm(30)
- 25.4 mm(6)
- 26.0 mm(11)
- 28.0 mm(1)
- 28.575 mm(3)
- 28.58 mm(1)
- 30.0 mm(8)
- 31.75 mm(6)
- 32.0 mm(17)
- 33.0 mm(4)
- 34.0 mm(4)
- 34.92 mm(2)
- 34.925 mm(4)
- 35.0 mm(8)
- 36.0 mm(5)
- 37.998 mm(1)
- 38.1 mm(8)
- 40.0 mm(27)
- 41.0 mm(4)
- 41.3 mm(58)
- 42.0 mm(5)
- 44.0 mm(6)
- 44.45 mm(2)
- 47.6 mm(57)
- 48.0 mm(3)
- 50.0 mm(34)
- 50.8 mm(2)
- 52.0 mm(14)
- 54.0 mm(4)
- 55.88 mm(3)
- 56.625 mm(49)
- 57.15 mm(6)
- 57.2 mm(29)
- 58.0 mm(4)
- 60.0 mm(56)
- 60.325 mm(4)
- 63.5 mm(22)
- 64.0 mm(4)
- 65.0 mm(1)
- 68.0 mm(4)
- 69.85 mm(4)
- 70.0 mm(8)
- 75.0 mm(59)
- 76.2 mm(8)
- 80.0 mm(11)
- 82.55 mm(4)
- 88.9 mm(565)
- 90.0 mm(8)
- 92.0 mm(3)
- 100.0 mm(73)
- 120.0 mm(13)
- 127.0 mm(1)
- 130.0 mm(4)
- 132.0 mm(4)
- 139.7 mm(785)
- 146.05 mm(3)
- 174.6 mm(141)
- 180.0 mm(72)
- 184.0 mm(3)
- 200.0 mm(8)
- 209.6 mm(256)
- 222.3 mm(66)
- 250.0 mm(72)
- 290.0 mm(8)
- 333.0 mm(4)
- 350.0 mm(66)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 in(152)
- 0.44 in(2)
- 0.453 in(2)
- 0.625 in(4)
- 0.6299 in(4)
- 0.63 in(4)
- 0.6693 in(3)
- 0.728 in(2)
- 0.73 in(4)
- 0.787 in(13)
- 0.7874 in(5)
- 0.8 in(1)
- 0.8268 in(3)
- 0.866 in(2)
- 0.8661 in(1)
- 0.984 in(16)
- 0.9843 in(15)
- 1.0 in(6)
- 1.02 in(1)
- 1.0236 in(5)
- 1.024 in(5)
- 1.1024 in(1)
- 1.125 in(4)
- 1.177 in(1)
- 1.181 in(7)
- 1.25 in(6)
- 1.2598 in(6)
- 1.26 in(11)
- 1.299 in(4)
- 1.339 in(4)
- 1.375 in(6)
- 1.378 in(8)
- 1.4173 in(5)
- 1.496 in(1)
- 1.5 in(8)
- 1.5748 in(5)
- 1.575 in(22)
- 1.61 in(1)
- 1.614 in(3)
- 1.626 in(58)
- 1.6535 in(5)
- 1.732 in(2)
- 1.7323 in(4)
- 1.75 in(2)
- 1.874 in(57)
- 1.8898 in(3)
- 1.9685 in(6)
- 1.969 in(28)
- 2.0 in(2)
- 2.047 in(5)
- 2.0472 in(9)
- 2.126 in(4)
- 2.2 in(3)
- 2.229 in(49)
- 2.25 in(6)
- 2.252 in(29)
- 2.2835 in(4)
- 2.362 in(48)
- 2.3622 in(8)
- 2.375 in(4)
- 2.5 in(22)
- 2.5197 in(4)
- 2.559 in(1)
- 2.6772 in(4)
- 2.75 in(4)
- 2.7559 in(8)
- 2.9528 in(7)
- 2.953 in(52)
- 3.0 in(8)
- 3.1496 in(7)
- 3.15 in(4)
- 3.25 in(4)
- 3.5 in(565)
- 3.5433 in(8)
- 3.622 in(3)
- 3.937 in(73)
- 4.7244 in(13)
- 5.0 in(1)
- 5.1181 in(4)
- 5.1969 in(4)
- 5.5 in(785)
- 5.75 in(3)
- 6.874 in(141)
- 7.0866 in(5)
- 7.087 in(67)
- 7.2441 in(3)
- 7.874 in(8)
- 8.252 in(256)
- 8.752 in(66)
- 9.8425 in(10)
- 9.843 in(62)
- 11.4173 in(8)
- 13.11 in(4)
- 13.7795 in(3)
- 13.78 in(63)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 0.787 in(28)
- 0.7874 in(10)
- 0.79 in(6)
- 0.8268 in(3)
- 0.9055 in(1)
- 0.984 in(1)
- 0.9843 in(5)
- 1.0236 in(2)
- 1.024 in(8)
- 1.028 in(1)
- 1.063 in(9)
- 1.102 in(4)
- 1.1024 in(3)
- 1.181 in(3)
- 1.1811 in(4)
- 1.185 in(1)
- 1.26 in(40)
- 1.3386 in(5)
- 1.339 in(3)
- 1.378 in(12)
- 1.417 in(1)
- 1.4173 in(12)
- 1.4961 in(2)
- 1.575 in(8)
- 1.618 in(1)
- 1.65 in(1)
- 1.6535 in(5)
- 1.654 in(37)
- 1.772 in(2)
- 1.811 in(1)
- 1.8898 in(4)
- 1.9685 in(1)
- 1.969 in(19)
- 2.047 in(21)
- 2.0472 in(9)
- 2.05 in(2)
- 2.126 in(2)
- 2.2835 in(4)
- 2.362 in(30)
- 2.3622 in(1)
- 2.44 in(6)
- 2.4409 in(4)
- 2.441 in(29)
- 2.5197 in(3)
- 2.52 in(11)
- 2.56 in(2)
- 2.5984 in(12)
- 2.8346 in(3)
- 2.9134 in(3)
- 2.9528 in(4)
- 2.953 in(46)
- 3.1496 in(4)
- 3.228 in(4)
- 3.3071 in(4)
- 3.7008 in(4)
- 3.937 in(67)
- 4.4094 in(4)
- 4.8819 in(3)
- 5.3543 in(4)
- 5.9055 in(3)
- 6.2992 in(4)
- 7.0866 in(7)
- 7.087 in(66)
- 7.874 in(2)
- 8.3465 in(4)
- 9.8425 in(5)
- 9.843 in(63)
- 10.0 in(4)
- 11.811 in(12)
- 13.7795 in(4)
- 13.78 in(62)
- 39.3307 in(14)
- 39.331 in(67)
- 393.661 in(1957)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 20.0 mm(38)
- 20.066 mm(6)
- 21.0 mm(3)
- 23.0 mm(1)
- 24.994 mm(1)
- 25.0 mm(5)
- 26.0 mm(10)
- 27.0 mm(9)
- 28.0 mm(7)
- 30.0 mm(8)
- 32.0 mm(40)
- 34.0 mm(8)
- 35.0 mm(13)
- 35.992 mm(1)
- 36.0 mm(12)
- 38.0 mm(2)
- 40.0 mm(8)
- 41.91 mm(1)
- 42.0 mm(42)
- 45.0 mm(2)
- 46.0 mm(1)
- 48.0 mm(4)
- 50.0 mm(21)
- 52.0 mm(30)
- 52.07 mm(2)
- 54.0 mm(2)
- 58.0 mm(3)
- 58.001 mm(1)
- 60.0 mm(31)
- 61.976 mm(6)
- 62.0 mm(33)
- 63.0 mm(2)
- 64.0 mm(14)
- 66.0 mm(12)
- 72.0 mm(3)
- 74.0 mm(3)
- 75.0 mm(50)
- 80.0 mm(4)
- 82.0 mm(4)
- 84.0 mm(4)
- 94.0 mm(4)
- 100.0 mm(67)
- 112.0 mm(4)
- 124.0 mm(3)
- 136.0 mm(4)
- 150.0 mm(3)
- 160.0 mm(4)
- 180.0 mm(73)
- 200.0 mm(2)
- 212.0 mm(4)
- 250.0 mm(68)
- 254.0 mm(4)
- 300.0 mm(12)
- 350.0 mm(66)
- 999.0 mm(81)
- 9999.0 mm(1957)
to
Countersunk Angle
Countersunk Angle
- 20.0 (6)
- 45.0 (12)
to
Cutting Direction
Cutting Direction
- B (8)
- E (1029)
- S (157)
Rake Angle Style
Rake Angle Style
- NEGATIVE-ZERO (284)
- NEUTRAL (ZERO) (289)
- POSITIVE-ZERO (206)
Maximum Bore Depth
Maximum Bore Depth
- 0.945 in(4)
- 1.0 in(14)
- 1.231 in(1)
- 1.235 in(1)
- 1.25 in(6)
- 1.259 in(2)
- 1.26 in(2)
- 1.29 in(1)
- 1.5 in(7)
- 1.56 in(1)
- 1.564 in(4)
- 1.575 in(10)
- 1.586 in(2)
- 1.59 in(2)
- 1.88 in(2)
- 1.96 in(1)
- 1.969 in(8)
- 1.98 in(8)
- 2.0 in(32)
- 2.496 in(2)
- 2.5 in(5)
- 2.509 in(3)
- 2.519 in(1)
- 2.5196 in(2)
- 2.52 in(12)
- 3.0 in(5)
- 3.139 in(4)
- 3.1496 in(2)
- 3.15 in(7)
- 3.16 in(2)
- 3.75 in(2)
- 3.7758 in(1)
- 3.92 in(2)
- 3.936 in(5)
- 3.937 in(1)
- 3.9372 in(3)
- 3.94 in(1)
- 4.0 in(12)
- 4.5 in(2)
- 5.0 in(5)
- 5.0392 in(2)
- 5.04 in(2)
- 6.0 in(8)
- 6.2992 in(4)
- 6.3 in(2)
- 7.0 in(3)
- 7.874 in(1)
- 8.0 in(8)
- 9.0 in(1)
- 10.0 in(7)
to
Maximum Bore Depth
Maximum Bore Depth
- 24.0 mm(4)
- 25.4 mm(14)
- 31.26 mm(1)
- 31.3 mm(1)
- 31.75 mm(6)
- 32.0 mm(4)
- 32.8 mm(1)
- 38.1 mm(7)
- 40.0 mm(15)
- 40.28 mm(2)
- 40.3 mm(2)
- 48.0 mm(2)
- 50.0 mm(9)
- 50.3 mm(8)
- 50.8 mm(32)
- 63.4 mm(2)
- 63.48 mm(1)
- 63.5 mm(4)
- 63.74 mm(1)
- 64.0 mm(16)
- 64.01 mm(1)
- 76.2 mm(5)
- 80.0 mm(15)
- 95.25 mm(2)
- 96.0 mm(1)
- 100.0 mm(12)
- 101.6 mm(12)
- 114.3 mm(2)
- 127.0 mm(5)
- 128.0 mm(4)
- 152.4 mm(8)
- 160.0 mm(6)
- 177.8 mm(3)
- 200.0 mm(1)
- 203.2 mm(8)
- 228.6 mm(1)
- 254.0 mm(7)
to
Boring Bar Material
Boring Bar Material
- C (9)
- S (183)
Front-End
Adapter Front-End
Adapter Front-End
- CARTRIDGE MOUNT (87)
- SQUARE SHANK ADAPTER (20)
Clamp Style
Clamp Style
- C (54)
- N (198)
- S (38)
- Y (1106)
Cutting Width
Cutting Width
- 0.0197 in(80)
- 0.031 in(127)
- 0.0315 in(84)
- 0.035 in(37)
- 0.039 in(70)
- 0.0394 in(187)
- 0.041 in(87)
- 0.047 in(235)
- 0.0472 in(179)
- 0.055 in(138)
- 0.0551 in(114)
- 0.058 in(77)
- 0.059 in(20)
- 0.0591 in(181)
- 0.061 in(14)
- 0.062 in(366)
- 0.063 in(89)
- 0.0669 in(86)
- 0.067 in(70)
- 0.0689 in(165)
- 0.072 in(108)
- 0.076 in(34)
- 0.0768 in(83)
- 0.077 in(33)
- 0.078 in(187)
- 0.0787 in(347)
- 0.0788 in(114)
- 0.079 in(365)
- 0.083 in(114)
- 0.0837 in(78)
- 0.084 in(241)
- 0.0866 in(163)
- 0.087 in(63)
- 0.088 in(187)
- 0.0886 in(127)
- 0.094 in(467)
- 0.097 in(92)
- 0.098 in(9)
- 0.0984 in(188)
- 0.099 in(120)
- 0.103 in(6)
- 0.105 in(96)
- 0.108 in(69)
- 0.1083 in(178)
- 0.11 in(88)
- 0.118 in(607)
- 0.1181 in(501)
- 0.119 in(84)
- 0.12 in(84)
- 0.1201 in(35)
- 0.122 in(220)
- 0.1228 in(95)
- 0.123 in(415)
- 0.125 in(884)
- 0.126 in(142)
- 0.1278 in(77)
- 0.128 in(90)
- 0.129 in(32)
- 0.13 in(265)
- 0.131 in(43)
- 0.1378 in(169)
- 0.142 in(92)
- 0.15 in(51)
- 0.151 in(75)
- 0.156 in(143)
- 0.157 in(393)
- 0.1574 in(271)
- 0.1575 in(432)
- 0.158 in(290)
- 0.159 in(9)
- 0.1594 in(15)
- 0.161 in(312)
- 0.162 in(323)
- 0.1622 in(74)
- 0.1624 in(197)
- 0.167 in(37)
- 0.1673 in(92)
- 0.1772 in(128)
- 0.178 in(83)
- 0.185 in(86)
- 0.187 in(286)
- 0.1875 in(271)
- 0.188 in(177)
- 0.189 in(254)
- 0.192 in(268)
- 0.195 in(94)
- 0.196 in(85)
- 0.1968 in(176)
- 0.1969 in(54)
- 0.197 in(322)
- 0.198 in(54)
- 0.201 in(66)
- 0.2018 in(245)
- 0.202 in(293)
- 0.213 in(40)
- 0.2165 in(20)
- 0.2166 in(20)
- 0.2186 in(1)
- 0.219 in(1)
- 0.236 in(246)
- 0.2362 in(185)
- 0.241 in(265)
- 0.2411 in(208)
- 0.25 in(403)
- 0.255 in(157)
- 0.256 in(42)
- 0.276 in(140)
- 0.281 in(139)
- 0.2881 in(131)
- 0.311 in(21)
- 0.312 in(80)
- 0.313 in(22)
- 0.315 in(102)
- 0.316 in(21)
- 0.317 in(50)
- 0.3199 in(76)
- 0.32 in(100)
- 0.375 in(42)
- 0.38 in(8)
- 0.381 in(5)
- 0.384 in(9)
- 0.394 in(37)
- 0.3986 in(18)
- 0.399 in(54)
to
Cutting Width
Cutting Width
- 0.5 mm(80)
- 0.787 mm(127)
- 0.8 mm(84)
- 0.889 mm(37)
- 0.991 mm(70)
- 1.0 mm(187)
- 1.041 mm(87)
- 1.19 mm(125)
- 1.194 mm(216)
- 1.2 mm(179)
- 1.39 mm(72)
- 1.397 mm(37)
- 1.4 mm(153)
- 1.473 mm(77)
- 1.49 mm(11)
- 1.5 mm(199)
- 1.55 mm(14)
- 1.57 mm(156)
- 1.575 mm(321)
- 1.6 mm(89)
- 1.69 mm(36)
- 1.7 mm(86)
- 1.702 mm(70)
- 1.75 mm(165)
- 1.829 mm(108)
- 1.94 mm(34)
- 1.95 mm(83)
- 1.956 mm(33)
- 1.981 mm(111)
- 1.99 mm(76)
- 2.0 mm(499)
- 2.007 mm(70)
- 2.12 mm(119)
- 2.125 mm(199)
- 2.13 mm(115)
- 2.2 mm(226)
- 2.235 mm(142)
- 2.236 mm(50)
- 2.24 mm(72)
- 2.25 mm(127)
- 2.38 mm(3)
- 2.387 mm(167)
- 2.388 mm(436)
- 2.39 mm(49)
- 2.464 mm(92)
- 2.49 mm(3)
- 2.5 mm(195)
- 2.51 mm(114)
- 2.511 mm(114)
- 2.62 mm(6)
- 2.667 mm(96)
- 2.74 mm(32)
- 2.743 mm(37)
- 2.75 mm(178)
- 2.794 mm(88)
- 2.997 mm(119)
- 3.0 mm(762)
- 3.05 mm(120)
- 3.099 mm(84)
- 3.1 mm(131)
- 3.11 mm(94)
- 3.12 mm(132)
- 3.125 mm(266)
- 3.13 mm(117)
- 3.17 mm(97)
- 3.175 mm(850)
- 3.177 mm(229)
- 3.18 mm(149)
- 3.2 mm(142)
- 3.245 mm(77)
- 3.25 mm(89)
- 3.251 mm(42)
- 3.27 mm(32)
- 3.3 mm(233)
- 3.301 mm(240)
- 3.302 mm(248)
- 3.32 mm(43)
- 3.5 mm(169)
- 3.607 mm(92)
- 3.81 mm(44)
- 3.82 mm(43)
- 3.835 mm(37)
- 3.84 mm(74)
- 3.96 mm(96)
- 3.962 mm(125)
- 3.974 mm(42)
- 3.988 mm(81)
- 4.0 mm(546)
- 4.05 mm(17)
- 4.094 mm(228)
- 4.1 mm(84)
- 4.11 mm(68)
- 4.12 mm(119)
- 4.125 mm(223)
- 4.242 mm(37)
- 4.25 mm(92)
- 4.5 mm(128)
- 4.521 mm(83)
- 4.699 mm(86)
- 4.75 mm(203)
- 4.76 mm(263)
- 4.762 mm(267)
- 4.763 mm(192)
- 4.775 mm(160)
- 4.78 mm(21)
- 4.785 mm(23)
- 4.788 mm(26)
- 4.8 mm(95)
- 4.801 mm(238)
- 4.873 mm(185)
- 4.877 mm(213)
- 4.878 mm(191)
- 4.88 mm(47)
- 4.95 mm(90)
- 4.953 mm(45)
- 4.978 mm(85)
- 5.0 mm(365)
- 5.004 mm(19)
- 5.1 mm(66)
- 5.12 mm(79)
- 5.125 mm(272)
- 5.13 mm(73)
- 5.41 mm(40)
- 5.5 mm(40)
- 5.56 mm(1)
- 5.563 mm(1)
- 6.0 mm(300)
- 6.12 mm(75)
- 6.125 mm(233)
- 6.13 mm(90)
- 6.346 mm(132)
- 6.35 mm(397)
- 6.36 mm(24)
- 6.477 mm(146)
- 6.478 mm(142)
- 6.502 mm(42)
- 7.0 mm(140)
- 7.125 mm(137)
- 7.137 mm(2)
- 7.317 mm(131)
- 7.92 mm(37)
- 7.925 mm(47)
- 7.937 mm(24)
- 7.938 mm(22)
- 7.94 mm(22)
- 8.0 mm(104)
- 8.051 mm(35)
- 8.052 mm(45)
- 8.125 mm(96)
- 8.13 mm(50)
- 9.525 mm(40)
- 9.53 mm(14)
- 9.651 mm(8)
- 9.677 mm(5)
- 9.754 mm(9)
- 10.0 mm(37)
- 10.125 mm(38)
- 10.13 mm(34)
to
Front End Type
Front End Type
- MCS - Modular Cartridge System (87)
- VKT - Square Shank (20)
Insert Shape
Insert Shape
- PRISMATIC (3194)
- TN-TOP NOTCH (2250)
Cartridge Size
Cartridge Size
- 50 (293)
- 65 (77)
Front End Style
Front End Style
- MCS01 Modular Deep Grooving (87)
- VKT01 Std Design (20)
Insert Size
Insert Size
- 1 (10)
- 10 (12)
- 1F (12)
- 2 (153)
- 2S (11)
- 3 (230)
- 3S (8)
- 4 (170)
- 4S (1)
- 5 (142)
- 5S (2)
- 6 (136)
- 8 (30)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.0 in(29)
- 0.04 in(1)
- 0.063 in(2)
- 0.067 in(1)
- 0.07 in(2)
- 0.075 in(1)
- 0.13 in(1)
- 0.138 in(39)
- 0.1382 in(1)
- 0.1969 in(3)
- 0.197 in(8)
- 0.21 in(39)
- 0.25 in(2)
- 0.2756 in(8)
- 0.276 in(24)
- 0.289 in(2)
- 0.291 in(1)
- 0.293 in(2)
- 0.294 in(23)
- 0.3 in(1)
- 0.315 in(10)
- 0.334 in(4)
- 0.3543 in(1)
- 0.3748 in(2)
- 0.39 in(6)
- 0.3937 in(15)
- 0.394 in(43)
- 0.409 in(4)
- 0.41 in(1)
- 0.415 in(2)
- 0.4151 in(1)
- 0.4331 in(5)
- 0.472 in(98)
- 0.4724 in(43)
- 0.473 in(10)
- 0.484 in(2)
- 0.4972 in(2)
- 0.512 in(8)
- 0.5315 in(9)
- 0.55 in(1)
- 0.551 in(10)
- 0.5512 in(93)
- 0.5709 in(4)
- 0.5906 in(3)
- 0.591 in(1)
- 0.6299 in(22)
- 0.63 in(267)
- 0.642 in(1)
- 0.646 in(7)
- 0.65 in(1)
- 0.669 in(1)
- 0.6693 in(42)
- 0.689 in(6)
- 0.748 in(26)
- 0.787 in(108)
- 0.7874 in(25)
- 0.7875 in(1)
- 0.788 in(1)
- 0.8268 in(9)
- 0.866 in(30)
- 0.8661 in(4)
- 0.9449 in(29)
- 0.9843 in(3)
- 1.02 in(5)
- 1.023 in(1)
- 1.0236 in(31)
- 1.024 in(172)
- 1.032 in(1)
- 1.1812 in(1)
- 1.2597 in(2)
- 1.2598 in(17)
- 1.26 in(70)
- 1.2992 in(12)
- 1.2994 in(2)
- 1.5 in(2)
- 1.5748 in(14)
- 1.575 in(16)
- 1.9685 in(5)
- 1.9686 in(3)
- 2.3622 in(8)
- 4.7244 in(2)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 0.0 mm(29)
- 1.016 mm(1)
- 1.6 mm(2)
- 1.69 mm(1)
- 1.78 mm(2)
- 1.9 mm(1)
- 3.3 mm(1)
- 3.505 mm(21)
- 3.51 mm(19)
- 5.0 mm(11)
- 5.33 mm(16)
- 5.334 mm(23)
- 6.35 mm(2)
- 7.0 mm(37)
- 7.46 mm(8)
- 7.468 mm(9)
- 7.47 mm(6)
- 7.62 mm(1)
- 8.0 mm(9)
- 8.001 mm(1)
- 8.484 mm(4)
- 9.0 mm(1)
- 9.519 mm(1)
- 9.52 mm(1)
- 9.906 mm(6)
- 10.0 mm(63)
- 10.54 mm(1)
- 10.541 mm(1)
- 10.543 mm(1)
- 11.0 mm(5)
- 12.0 mm(153)
- 12.63 mm(2)
- 13.0 mm(8)
- 13.5 mm(9)
- 13.995 mm(2)
- 14.0 mm(102)
- 14.5 mm(4)
- 15.0 mm(4)
- 16.0 mm(294)
- 16.002 mm(4)
- 17.0 mm(43)
- 17.5 mm(6)
- 18.999 mm(1)
- 19.0 mm(25)
- 20.0 mm(135)
- 21.0 mm(9)
- 22.0 mm(34)
- 24.0 mm(29)
- 25.0 mm(3)
- 25.908 mm(5)
- 25.999 mm(6)
- 26.0 mm(199)
- 30.0 mm(1)
- 31.996 mm(2)
- 32.0 mm(87)
- 33.0 mm(14)
- 40.0 mm(32)
- 50.0 mm(8)
- 60.0 mm(8)
- 120.0 mm(2)
to
Gage Length
Gage Length
- 0.8500 in(1)
- 0.8660 in(11)
- 1.1020 in(2)
- 1.2990 in(2)
- 1.4960 in(2)
- 1.6930 in(2)
- 1.8500 in(6)
- 1.8900 in(6)
- 1.9290 in(4)
- 2.1060 in(4)
- 2.1850 in(2)
- 2.2440 in(8)
- 2.2830 in(8)
- 2.3030 in(6)
- 2.3031 in(1)
- 2.3820 in(2)
- 2.5000 in(14)
- 2.5790 in(2)
- 2.6180 in(4)
- 2.6970 in(4)
- 2.8940 in(4)
- 3.4250 in(2)
- 3.4840 in(2)
- 5.4390 in(3)
- 5.4630 in(4)
- 5.4820 in(4)
- 5.5080 in(12)
- 5.5280 in(10)
- 5.5330 in(4)
- 5.5335 in(3)
- 5.9060 in(4)
- 6.0000 in(8)
- 6.2260 in(2)
- 6.2500 in(4)
- 6.2700 in(4)
- 6.5330 in(2)
- 6.6930 in(3)
- 7.0000 in(4)
Gage Length
Gage Length
- 22.0000 mm(12)
- 28.0000 mm(2)
- 33.0000 mm(2)
- 38.0000 mm(2)
- 43.0000 mm(2)
- 47.0000 mm(6)
- 48.0000 mm(6)
- 49.0000 mm(4)
- 53.5000 mm(4)
- 55.5000 mm(2)
- 57.0000 mm(8)
- 58.0000 mm(8)
- 58.5000 mm(7)
- 60.5000 mm(2)
- 63.5000 mm(14)
- 65.5000 mm(2)
- 66.5000 mm(4)
- 68.5000 mm(4)
- 73.5000 mm(4)
- 87.0000 mm(2)
- 88.5000 mm(2)
- 138.1500 mm(3)
- 138.7500 mm(4)
- 139.2500 mm(4)
- 139.9000 mm(11)
- 139.9030 mm(1)
- 140.4000 mm(10)
- 140.5500 mm(7)
- 150.0000 mm(4)
- 152.4000 mm(8)
- 158.1500 mm(2)
- 158.7500 mm(4)
- 159.2500 mm(4)
- 165.9500 mm(2)
- 170.0000 mm(3)
- 177.8000 mm(4)
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
- 0.64 mm(12)
- 0.76 mm(19)
- 0.762 mm(138)
- 1.0 mm(8)
- 1.015 mm(8)
- 1.016 mm(266)
- 1.02 mm(8)
- 1.063 mm(6)
- 1.09 mm(47)
- 1.092 mm(163)
- 1.335 mm(15)
- 1.5 mm(13)
- 1.56 mm(12)
- 1.588 mm(6)
- 1.59 mm(4)
- 1.9 mm(13)
- 1.905 mm(1)
- 1.97 mm(6)
- 1.981 mm(6)
- 2.0 mm(49)
- 2.06 mm(10)
- 2.38 mm(8)
- 2.5 mm(13)
- 2.54 mm(11)
- 2.563 mm(11)
- 2.75 mm(7)
- 2.777 mm(3)
- 2.9 mm(18)
- 2.92 mm(53)
- 2.921 mm(121)
- 3.0 mm(32)
- 3.063 mm(9)
- 3.175 mm(11)
- 3.3 mm(12)
- 3.4 mm(56)
- 3.41 mm(12)
- 3.5 mm(40)
- 3.51 mm(5)
- 3.52 mm(6)
- 3.6 mm(6)
- 3.81 mm(70)
- 3.84 mm(6)
- 3.86 mm(4)
- 3.969 mm(2)
- 4.0 mm(8)
- 4.063 mm(9)
- 4.1 mm(12)
- 4.15 mm(1)
- 4.2 mm(54)
- 4.4 mm(10)
- 4.5 mm(18)
- 4.6 mm(1)
- 4.74 mm(10)
- 4.763 mm(2)
- 4.9 mm(47)
- 5.0 mm(4)
- 5.063 mm(6)
- 5.9 mm(12)
- 6.0 mm(22)
- 6.1 mm(6)
- 6.24 mm(4)
- 6.35 mm(1)
- 6.4 mm(20)
- 7.94 mm(5)
- 8.1 mm(13)
- 8.2 mm(1)
to
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
- 0.025 in(12)
- 0.03 in(157)
- 0.039 in(8)
- 0.04 in(282)
- 0.0418 in(6)
- 0.043 in(210)
- 0.0526 in(15)
- 0.059 in(4)
- 0.0591 in(9)
- 0.0614 in(12)
- 0.0625 in(6)
- 0.063 in(4)
- 0.075 in(14)
- 0.078 in(12)
- 0.0785 in(6)
- 0.079 in(43)
- 0.0811 in(10)
- 0.094 in(8)
- 0.098 in(4)
- 0.0984 in(9)
- 0.1 in(11)
- 0.1009 in(11)
- 0.108 in(7)
- 0.1093 in(3)
- 0.115 in(193)
- 0.118 in(25)
- 0.1181 in(6)
- 0.1206 in(9)
- 0.125 in(11)
- 0.13 in(12)
- 0.132 in(4)
- 0.133 in(1)
- 0.134 in(63)
- 0.138 in(51)
- 0.143 in(6)
- 0.15 in(70)
- 0.151 in(6)
- 0.152 in(4)
- 0.155 in(1)
- 0.1565 in(2)
- 0.1575 in(5)
- 0.158 in(2)
- 0.1599 in(9)
- 0.162 in(6)
- 0.163 in(7)
- 0.165 in(54)
- 0.175 in(10)
- 0.177 in(18)
- 0.182 in(1)
- 0.187 in(10)
- 0.1875 in(2)
- 0.192 in(11)
- 0.193 in(35)
- 0.194 in(1)
- 0.197 in(4)
- 0.1993 in(6)
- 0.234 in(12)
- 0.235 in(4)
- 0.236 in(18)
- 0.238 in(3)
- 0.241 in(3)
- 0.246 in(4)
- 0.25 in(1)
- 0.251 in(6)
- 0.252 in(14)
- 0.312 in(5)
- 0.319 in(13)
- 0.322 in(1)
to
Minimum Groove Diameter
Minimum Groove Diameter
- 1.02 in(1)
- 1.024 in(3)
- 1.1024 in(1)
- 1.177 in(1)
- 1.181 in(7)
- 1.299 in(4)
- 1.378 in(4)
- 1.575 in(8)
- 1.61 in(1)
- 1.614 in(3)
- 1.969 in(16)
- 2.362 in(32)
- 2.7559 in(3)
- 2.953 in(32)
- 3.5433 in(2)
- 3.937 in(40)
- 4.7244 in(5)
- 7.0866 in(1)
- 7.087 in(39)
- 9.843 in(38)
- 13.78 in(39)
to
Minimum Groove Diameter
Minimum Groove Diameter
- 26.0 mm(4)
- 28.0 mm(1)
- 30.0 mm(8)
- 33.0 mm(4)
- 35.0 mm(4)
- 40.0 mm(8)
- 41.0 mm(4)
- 50.0 mm(16)
- 60.0 mm(32)
- 70.0 mm(3)
- 75.0 mm(32)
- 90.0 mm(2)
- 100.0 mm(40)
- 120.0 mm(5)
- 180.0 mm(40)
- 250.0 mm(38)
- 350.0 mm(39)
to
Maximum Groove Diameter
Maximum Groove Diameter
- 30.0 mm(4)
- 35.0 mm(8)
- 38.0 mm(1)
- 40.0 mm(4)
- 42.0 mm(4)
- 50.0 mm(12)
- 60.0 mm(18)
- 75.0 mm(30)
- 100.0 mm(32)
- 180.0 mm(40)
- 250.0 mm(40)
- 350.0 mm(38)
- 999.0 mm(39)
to
Maximum Groove Diameter
Maximum Groove Diameter
- 1.028 in(1)
- 1.181 in(3)
- 1.185 in(1)
- 1.378 in(7)
- 1.4961 in(1)
- 1.575 in(4)
- 1.618 in(1)
- 1.654 in(4)
- 1.969 in(11)
- 2.362 in(18)
- 2.953 in(30)
- 3.937 in(32)
- 7.0866 in(2)
- 7.087 in(38)
- 9.8425 in(1)
- 9.843 in(39)
- 13.78 in(38)
- 39.331 in(39)
to
Insert Geometry
Shape
Shape
- PRISMATIC (1790)
- TN-TOP NOTCH (2051)
Insert Seat Size
Insert Seat Size
- 1 (55)
- 10 (74)
- 1B (38)
- 1F (12)
- 2 (842)
- 2B (18)
- 2S (14)
- 3 (1464)
- 3S (24)
- 4 (709)
- 4S (14)
- 5 (178)
- 5S (16)
- 6 (271)
- 8 (177)
Cutting Tool Material
Cutting Tool Material
- B H (391)
- B L (1233)
- C A (7)
- C N (292)
- D P (291)
- H T (502)
- H W (5304)
Back-End
Connection Type
Connection Type
- BORING BAR (186)
- BORING BAR HEAD (6)
- CUTOFF BLADE (85)
- Cutoff Blade (3)
- SQUARE SHANK (914)
System Size
System Size
- KM40TS (4)
- KM4X100 (4)
- KM4X63 (8)
- KM50TS (8)
- KM63TS (8)
- KM63XMZ (11)
- KM80ATC (8)
- KM80TS (8)
- PSC40 (4)
- PSC50 (8)
- PSC63 (8)
- PSC80 (8)
- VDI30 (10)
- VDI40 (10)
Back-End Diameter
Back-End Diameter
- 9.525 mm(1)
- 10.0 mm(1)
- 12.0 mm(7)
- 12.7 mm(9)
- 15.87 mm(5)
- 15.875 mm(7)
- 16.0 mm(11)
- 19.0 mm(1)
- 19.05 mm(15)
- 20.0 mm(16)
- 25.0 mm(23)
- 25.4 mm(25)
- 30.0 mm(10)
- 31.7 mm(1)
- 31.75 mm(12)
- 32.0 mm(14)
- 38.1 mm(11)
- 40.0 mm(30)
- 44.45 mm(3)
- 50.0 mm(17)
- 50.8 mm(9)
- 57.15 mm(1)
- 63.0 mm(35)
- 63.5 mm(7)
- 80.0 mm(24)
- 100.0 mm(4)
to
Back-End Diameter
Back-End Diameter
- 1.181 in(8)
- 1.2 in(2)
- 1.5748 in(4)
- 1.575 in(14)
- 1.9685 in(4)
- 1.969 in(8)
- 1.97 in(4)
- 2.48 in(28)
- 2.4803 in(7)
- 3.15 in(24)
- 3.937 in(4)
to
Shank Height
Shank Height
- 0.375 in(12)
- 0.394 in(10)
- 0.472 in(30)
- 0.4724 in(11)
- 0.5 in(40)
- 0.6067 in(1)
- 0.625 in(28)
- 0.628 in(1)
- 0.6299 in(11)
- 0.63 in(19)
- 0.747 in(5)
- 0.7471 in(1)
- 0.748 in(2)
- 0.75 in(106)
- 0.785 in(5)
- 0.787 in(63)
- 0.7874 in(65)
- 0.9378 in(1)
- 0.982 in(8)
- 0.984 in(127)
- 0.9843 in(50)
- 1.0 in(196)
- 1.02 in(4)
- 1.022 in(5)
- 1.0224 in(3)
- 1.0225 in(4)
- 1.023 in(4)
- 1.0236 in(19)
- 1.2134 in(2)
- 1.25 in(59)
- 1.2587 in(1)
- 1.2589 in(6)
- 1.259 in(2)
- 1.2598 in(46)
- 1.26 in(39)
- 1.5 in(11)
- 1.5283 in(4)
- 1.5748 in(6)
- 1.8488 in(1)
- 2.0659 in(1)
- 2.07 in(2)
to
Shank Height
Shank Height
- 9.52 mm(2)
- 9.525 mm(4)
- 9.53 mm(6)
- 10.0 mm(10)
- 12.0 mm(41)
- 12.7 mm(16)
- 12.71 mm(24)
- 15.41 mm(1)
- 15.875 mm(12)
- 15.88 mm(16)
- 16.0 mm(31)
- 19.0 mm(8)
- 19.05 mm(106)
- 20.0 mm(133)
- 23.82 mm(1)
- 25.0 mm(185)
- 25.4 mm(196)
- 26.0 mm(39)
- 30.82 mm(2)
- 31.75 mm(59)
- 32.0 mm(94)
- 38.1 mm(11)
- 38.82 mm(4)
- 40.0 mm(6)
- 46.96 mm(1)
- 52.475 mm(1)
- 52.5 mm(2)
to
Shank Width
Shank Width
- 0.065 in(6)
- 0.07 in(1)
- 0.0701 in(1)
- 0.0709 in(6)
- 0.071 in(5)
- 0.078 in(1)
- 0.094 in(5)
- 0.0945 in(10)
- 0.1339 in(3)
- 0.134 in(4)
- 0.173 in(2)
- 0.1732 in(3)
- 0.2126 in(3)
- 0.213 in(3)
- 0.2756 in(1)
- 0.276 in(2)
- 0.313 in(32)
- 0.375 in(12)
- 0.394 in(10)
- 0.472 in(28)
- 0.4724 in(13)
- 0.5 in(40)
- 0.624 in(1)
- 0.625 in(28)
- 0.628 in(1)
- 0.6299 in(12)
- 0.63 in(18)
- 0.743 in(1)
- 0.75 in(105)
- 0.785 in(5)
- 0.787 in(62)
- 0.7874 in(64)
- 0.79 in(1)
- 0.8646 in(1)
- 0.98 in(1)
- 0.982 in(6)
- 0.984 in(132)
- 0.9843 in(59)
- 0.985 in(1)
- 1.0 in(196)
- 1.1402 in(2)
- 1.25 in(59)
- 1.2598 in(18)
- 1.26 in(24)
- 1.4551 in(4)
- 1.5 in(11)
- 1.5748 in(6)
- 1.8488 in(1)
to
Shank Width
Shank Width
- 1.65 mm(6)
- 1.78 mm(3)
- 1.8 mm(11)
- 2.4 mm(15)
- 3.4 mm(7)
- 4.4 mm(5)
- 5.4 mm(6)
- 7.0 mm(3)
- 7.95 mm(32)
- 9.52 mm(2)
- 9.525 mm(7)
- 9.53 mm(3)
- 10.0 mm(10)
- 12.0 mm(41)
- 12.7 mm(16)
- 12.71 mm(24)
- 15.875 mm(15)
- 15.88 mm(13)
- 16.0 mm(32)
- 18.86 mm(1)
- 19.05 mm(105)
- 20.0 mm(132)
- 21.96 mm(1)
- 25.0 mm(198)
- 25.01 mm(1)
- 25.4 mm(196)
- 28.96 mm(2)
- 31.75 mm(59)
- 32.0 mm(42)
- 36.96 mm(4)
- 38.1 mm(11)
- 40.0 mm(6)
- 46.96 mm(1)
to
No filters matching ""
For any technical inquiries, please reach out to us via our Customer Support center