KM™ Quick Change Tools
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (95)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(95)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(95)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(95)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(95)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(95)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(95)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(95)
- M Stainless Steel (95)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(95)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(95)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(95)
- K Cast Iron (95)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(95)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(95)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(95)
- N Non-Ferrous Materials (95)
- N1Wrought Aluminum (95)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(95)
- N3High-Silicon Aluminum Alloys Si >12.2%(93)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (95)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (95)
- N6Carbon, Graphite Composites, CFRP (95)
- N7MMC's (95)
- S High-Temp Alloys (95)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(95)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(95)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(95)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(95)
- H Hardened Materials (95)
- H1Hardened Materials 44-48 HRC(95)
- H2Hardened Materials 48-55 HRC(95)
- H3Hardened Materials 56-60 HRC(95)
- H4Hardened Materials >60 HRC(95)
Applications
Applications
Facing (95)
Multiple Direction Cutting (95)
Profiling (90)
TRN Boring (90)
Turning (95)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (95)
- Lightly Interrupted Cut (95)
- Smooth Cut (95)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 93.0 (37)
- 95.0 (58)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (93)
- 2.0 (86)
- 3.0 (9)
- 4.0 (86)
- 6.0 (9)
- 8.0 (49)
to
Over All Length [L]
Over All Length [L]
- 60.0 mm(3)
- 70.0 mm(8)
- 80.0 mm(6)
- 90.0 mm(13)
- 100.0 mm(14)
- 110.0 mm(16)
- 125.0 mm(13)
- 140.0 mm(18)
- 170.0 mm(4)
to
Corner Radius
Corner Radius
- 0.1 mm(93)
- 0.2 mm(93)
- 0.4 mm(95)
- 0.6 mm(9)
- 0.8 mm(95)
- 1.2 mm(95)
- 1.6 mm(95)
- 2.375 mm(2)
- 2.4 mm(2)
to
Application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (86)
- CW5025 (58)
- K060 (47)
- K313 (95)
- K68 (86)
- KB1340 (47)
- KB1345 (84)
- KB1610 (93)
- KB1630 (84)
- KB5610 (84)
- KB5630 (84)
- KBH10 (93)
- KBH10B (93)
- KBH20 (93)
- KBH20B (93)
- KC5010 (95)
- KC5025 (95)
- KC5410 (95)
- KC730 (95)
- KC850 (95)
- KCK05 (95)
- KCK05B (56)
- KCK15 (95)
- KCK15B (95)
- KCK20 (95)
- KCK20B (95)
- KCM15 (95)
- KCM15B (95)
- KCM25 (95)
- KCM25B (95)
- KCM35 (95)
- KCM35B (58)
- KCP05 (93)
- KCP05B (93)
- KCP10 (95)
- KCP10B (95)
- KCP25 (95)
- KCP25B (95)
- KCP25C (95)
- KCP30 (95)
- KCP30B (95)
- KCP40 (95)
- KCP40B (95)
- KCPK05 (95)
- KCS10 (47)
- KCS10B (95)
- KCU10 (95)
- KCU10B (95)
- KCU25 (95)
- KCU25B (95)
- KD1400 (84)
- KD1405 (84)
- KD1425 (93)
- KS15 (47)
- KT315 (93)
- KT325 (47)
- KTP10 (93)
- KTP25S (93)
- KY1540 (47)
- KY3500 (95)
- KY4300 (86)
- KY4400 (93)
- KYHK15B (95)
- KYK10 (84)
- KYK25 (95)
- KYS25 (47)
- KYS30 (93)
- PB100 (47)
- SP4019 (47)
- THM (47)
- THM-X (47)
- THMF-X (47)
- TN10P (95)
- TN10U (93)
- TN15M (93)
- TN15U (84)
- TN2000 (56)
- TN20K (95)
- TN20P (95)
- TN30M (93)
- TN30P (58)
- TN4000 (56)
- TN6010 (47)
- TTS (47)
- WBH10P (84)
- WBH10U (47)
- WBH20P (93)
- WBH30P (84)
- WBK45U (37)
- WDN00U (84)
- WDN25U (93)
- WK05CT (95)
- WK15CT (56)
- WK20CT (95)
- WM15CT (95)
- WM25CT (95)
- WM35CT (58)
- WP05CT (56)
- WP15CT (95)
- WP25CT (95)
- WP35CT (95)
- WS10PT (95)
- WS25PT (95)
- WU10HT (95)
- WU10PT (93)
- WU25PT (93)
- X00580 (47)
- X00581 (47)
- X00582 (47)
- X00583 (47)
- X00584 (47)
- X00585 (47)
- X00586 (47)
- X00591 (47)
- X00592 (47)
- X00593 (47)
- X00594 (47)
- X00596 (47)
- X00597 (47)
- X00599 (47)
Hand Of Tool
Hand Of Tool
- L (46)
- R (49)
Wiper Insert
Wiper Insert
- N (95)
- Y (93)
F Dimension
F Dimension
- 17.0 mm(31)
- 22.0 mm(30)
- 27.0 mm(24)
- 35.0 mm(10)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 32.0 mm(31)
- 40.0 mm(30)
- 50.0 mm(24)
- 63.0 mm(10)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 32.0 mm(31)
- 40.0 mm(30)
- 50.0 mm(24)
- 63.0 mm(10)
to
Cutting Direction
Cutting Direction
- B (58)
- E (37)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (92)
- DOUBLE POSITIVE (3)
Maximum Bore Depth
Maximum Bore Depth
- 38.3 mm(3)
- 49.22 mm(2)
- 50.45 mm(2)
- 55.09 mm(4)
- 58.0 mm(1)
- 60.0 mm(1)
- 60.47 mm(4)
- 62.07 mm(3)
- 70.47 mm(4)
- 75.0 mm(2)
- 75.04 mm(6)
- 76.02 mm(4)
- 77.14 mm(4)
- 81.26 mm(4)
- 87.23 mm(6)
- 88.23 mm(4)
- 91.26 mm(2)
- 91.28 mm(2)
- 96.02 mm(6)
- 96.26 mm(5)
- 104.4 mm(4)
- 112.07 mm(4)
- 117.14 mm(4)
- 120.34 mm(8)
- 140.0 mm(2)
- 149.4 mm(4)
to
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (49)
- D-DIAMOND/RHOMBIC 55 (37)
- W-TRIGON 80 (9)
Maximum Cutting Depth
Maximum Cutting Depth
- 4.5 mm(1)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (93)
- B L (93)
- C A (95)
- C N (95)
- D P (93)
- H T (93)
- H W (95)
Back-End
System Size
System Size
- KM32 (3)
- KM32TS (1)
- KM40TS (20)
- KM50TS (42)
- KM63TS (29)
Back-End Diameter
Back-End Diameter
- 32.0 mm(4)
- 40.0 mm(20)
- 50.0 mm(42)
- 63.0 mm(29)
to
No filters matching ""
