KM Micro™ OD Applications • A2™ Grooving and Cut-Off
-
P Steel (3)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (3)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (3)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (3)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (3)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (3)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (3)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (3)
-
-
M Stainless Steel (3)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (3)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (3)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (3)
-
-
K Cast Iron (3)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (3)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (3)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (3)
-
-
N Non-Ferrous Materials (3)
-
N1Wrought Aluminum (3)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (3)
-
N4Copper, Brass, Zinc-based on machinability index range of 70-100 (3)
-
N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (3)
-
N6Carbon, Graphite Composites, CFRP (3)
-
-
S High-Temp Alloys (3)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (3)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (3)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (3)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (3)
-
-
Face Grooving (3)
-
Grooving (3)
-
ID Grooving (3)
-
Multiple Direction Cutting (3)
-
Heavily Interrupted Cut (3)
-
Lightly Interrupted Cut (3)
-
Smooth Cut (3)
-
90.0 (3)
-
Cutoff Support Blade A1-A3 (3)
-
1.0 (3)
-
0.797 in (1)
-
0.992 in (2)
-
20.25 mm (1)
-
25.201 mm (2)
-
0.004 in (1)
-
0.006 in (1)
-
0.008 in (2)
-
0.012 in (2)
-
0.1 mm (1)
-
0.151 mm (1)
-
0.2 mm (2)
-
0.301 mm (2)
-
KC5025 (3)
-
KCU25 (3)
-
KMF (3)
-
KT315 (3)
-
N - Neutral (3)
-
N (3)
-
1.701 mm (1)
-
2.0 mm (2)
-
0.067 in (1)
-
0.079 in (2)
-
E (3)
-
CUTOFF SUPPORT BLADE (4)
-
Y (3)
-
0.061 in (1)
-
0.063 in (1)
-
0.088 in (2)
-
1.55 mm (1)
-
1.6 mm (1)
-
2.2 mm (2)
-
PMK - Prismatic Adapter Kenna (4)
-
PRISMATIC (3)
-
PMK03 CutOffBld A1-A3 Hlfw/Pin (4)
-
0.433 in (1)
-
0.63 in (2)
-
11.0 mm (1)
-
16.0 mm (2)
-
0.189 in (4)
-
4.801 mm (4)
-
H T (3)
-
H W (3)
-
Cutoff Blade (3)
-
KM12 (2)
-
KM16 (2)
-
0.748 in (3)
-
19.0 mm (3)
-
0.072 in (3)
-
1.8 mm (3)