Solid Carbide Drills

Drilling is one of the most common operations used to make a hole in steel, stainless steel, cast iron, and non-ferrous and high-temp materials. Kennametal offers a full line of versatile and material-specific solid carbide drills that are designed to perform in general-purpose, multi-purpose, and high-volume production environments. Our cutting-edge material-specific innovations can be used at high-cutting parameters to save machining time and free up capacity in mass production environments while the general-purpose solid carbide drill bits offer the broadest diameter selection for end users who need long tool life in various materials. Select from the high-performance HPR and HPX drills with material-specific coatings, the Kenna Universal™ multi-purpose drill for small and medium-sized shops, or our GOdrill™ multi-material drill to cut all materials.

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (5767)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(5307)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(5307)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(5307)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(5307)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(5383)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(4825)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(4825)
    • M Stainless Steel (3865)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(3865)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(3865)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(3865)
    • K Cast Iron (4679)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(4679)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(4584)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(4584)
    • N Non-Ferrous Materials (3744)
      • N1
        Wrought Aluminum (3724)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(3744)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(3744)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (3724)
    • S High-Temp Alloys (3946)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(3763)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(3763)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(3763)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(3946)
    • H Hardened Materials (1966)
      • H1
        Hardened Materials 44-48 HRC(1966)
      • H2
        Hardened Materials 48-55 HRC(1786)
      • H3
        Hardened Materials 56-60 HRC(76)
      • H4
        Hardened Materials >60 HRC(76)
    • C CFRP Materials (31)
      • C1
        CFRP, CFRP / CFRP (10)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (21)
      • C3
        CFRP / Titanium CFRP / High Temp (21)
      • C4
        CFRP / Stainless Steel (21)
    Select First Choice
    • BR (157)
    • CN (881)
    • DE (856)
    • GB (568)
    • IN (182)
    • SG (297)
    • US (1137)
    Applications
    Applications
    • Convex DrillingConvex Drilling (539)
    • Corner Style SquareEnd DrillingCorner Style SquareEnd Drilling (211)
    • CornerStyle Chamfer DrillingCornerStyle Chamfer Drilling (1214)
    • CounterboringCounterboring (211)
    • CountersinkingCountersinking (182)
    • Cross Hole DrillingCross Hole Drilling (3097)
    • DrillingDrilling (6712)
    • Flat Bottom DrillingFlat Bottom Drilling (211)
    • Inclined Entry DrillingInclined Entry Drilling (306)
    • Inclined Exit DrillingInclined Exit Drilling (3019)
    • Stacked Plates DrillingStacked Plates Drilling (6110)
    • X-Offset DrillingX-Offset Drilling (1)
    Cutting Diameter
    Cutting Diameter
    • 0.0 in(1)
    • 0.02 in(2)
    • 0.024 in(2)
    • 0.028 in(2)
    • 0.031 in(3)
    • 0.035 in(3)
    • 0.039 in(11)
    • 0.04 in(3)
    • 0.041 in(2)
    • 0.042 in(3)
    • 0.044 in(12)
    • 0.046 in(2)
    • 0.047 in(14)
    • 0.052 in(11)
    • 0.053 in(3)
    • 0.055 in(14)
    • 0.06 in(13)
    • 0.063 in(13)
    • 0.067 in(13)
    • 0.072 in(13)
    • 0.075 in(13)
    • 0.078 in(5)
    • 0.079 in(13)
    • 0.083 in(13)
    • 0.088 in(13)
    • 0.091 in(13)
    • 0.094 in(14)
    • 0.095 in(21)
    • 0.096 in(9)
    • 0.098 in(41)
    • 0.099 in(1)
    • 0.101 in(7)
    • 0.103 in(19)
    • 0.105 in(7)
    • 0.106 in(20)
    • 0.109 in(9)
    • 0.11 in(22)
    • 0.111 in(7)
    • 0.113 in(8)
    • 0.114 in(19)
    • 0.116 in(6)
    • 0.119 in(61)
    • 0.12 in(13)
    • 0.122 in(32)
    • 0.124 in(1)
    • 0.125 in(54)
    • 0.126 in(37)
    • 0.128 in(1)
    • 0.129 in(25)
    • 0.13 in(45)
    • 0.134 in(32)
    • 0.136 in(28)
    • 0.137 in(1)
    • 0.138 in(54)
    • 0.14 in(1)
    • 0.142 in(20)
    • 0.143 in(34)
    • 0.145 in(11)
    • 0.146 in(35)
    • 0.147 in(15)
    • 0.15 in(39)
    • 0.151 in(1)
    • 0.152 in(3)
    • 0.154 in(32)
    • 0.156 in(47)
    • 0.157 in(68)
    • 0.159 in(19)
    • 0.16 in(1)
    • 0.161 in(44)
    • 0.162 in(1)
    • 0.163 in(2)
    • 0.165 in(55)
    • 0.166 in(11)
    • 0.169 in(41)
    • 0.173 in(16)
    • 0.174 in(29)
    • 0.176 in(1)
    • 0.177 in(67)
    • 0.178 in(1)
    • 0.179 in(3)
    • 0.18 in(3)
    • 0.181 in(36)
    • 0.182 in(13)
    • 0.183 in(5)
    • 0.185 in(34)
    • 0.187 in(1)
    • 0.188 in(50)
    • 0.189 in(47)
    • 0.19 in(5)
    • 0.191 in(14)
    • 0.193 in(32)
    • 0.194 in(3)
    • 0.197 in(70)
    • 0.198 in(1)
    • 0.199 in(5)
    • 0.2 in(1)
    • 0.201 in(77)
    • 0.203 in(21)
    • 0.206 in(48)
    • 0.208 in(5)
    • 0.209 in(33)
    • 0.213 in(59)
    • 0.217 in(61)
    • 0.218 in(1)
    • 0.219 in(54)
    • 0.221 in(48)
    • 0.222 in(1)
    • 0.224 in(33)
    • 0.228 in(56)
    • 0.232 in(29)
    • 0.234 in(18)
    • 0.237 in(72)
    • 0.239 in(1)
    • 0.24 in(33)
    • 0.242 in(1)
    • 0.244 in(40)
    • 0.248 in(29)
    • 0.25 in(66)
    • 0.252 in(30)
    • 0.253 in(1)
    • 0.256 in(62)
    • 0.257 in(31)
    • 0.26 in(36)
    • 0.261 in(11)
    • 0.262 in(2)
    • 0.264 in(28)
    • 0.265 in(1)
    • 0.266 in(40)
    • 0.268 in(58)
    • 0.272 in(36)
    • 0.276 in(69)
    • 0.277 in(2)
    • 0.28 in(27)
    • 0.281 in(48)
    • 0.284 in(21)
    • 0.288 in(23)
    • 0.289 in(1)
    • 0.29 in(2)
    • 0.291 in(37)
    • 0.295 in(49)
    • 0.297 in(31)
    • 0.299 in(18)
    • 0.303 in(21)
    • 0.307 in(36)
    • 0.311 in(17)
    • 0.313 in(60)
    • 0.315 in(73)
    • 0.316 in(2)
    • 0.318 in(1)
    • 0.319 in(32)
    • 0.323 in(32)
    • 0.327 in(17)
    • 0.328 in(37)
    • 0.331 in(26)
    • 0.332 in(22)
    • 0.335 in(68)
    • 0.336 in(1)
    • 0.337 in(1)
    • 0.339 in(30)
    • 0.343 in(33)
    • 0.345 in(46)
    • 0.347 in(40)
    • 0.348 in(1)
    • 0.349 in(2)
    • 0.351 in(15)
    • 0.354 in(65)
    • 0.356 in(1)
    • 0.358 in(32)
    • 0.359 in(35)
    • 0.362 in(16)
    • 0.366 in(26)
    • 0.368 in(13)
    • 0.37 in(19)
    • 0.374 in(47)
    • 0.375 in(59)
    • 0.376 in(1)
    • 0.378 in(17)
    • 0.382 in(23)
    • 0.384 in(7)
    • 0.386 in(35)
    • 0.39 in(19)
    • 0.391 in(32)
    • 0.394 in(71)
    • 0.398 in(20)
    • 0.402 in(58)
    • 0.404 in(3)
    • 0.406 in(31)
    • 0.408 in(42)
    • 0.41 in(22)
    • 0.414 in(64)
    • 0.417 in(17)
    • 0.421 in(20)
    • 0.422 in(45)
    • 0.425 in(35)
    • 0.427 in(1)
    • 0.429 in(9)
    • 0.433 in(61)
    • 0.434 in(1)
    • 0.437 in(19)
    • 0.438 in(40)
    • 0.441 in(27)
    • 0.445 in(17)
    • 0.447 in(1)
    • 0.449 in(14)
    • 0.453 in(84)
    • 0.455 in(1)
    • 0.456 in(1)
    • 0.457 in(13)
    • 0.461 in(24)
    • 0.465 in(39)
    • 0.47 in(38)
    • 0.473 in(70)
    • 0.477 in(20)
    • 0.48 in(21)
    • 0.484 in(49)
    • 0.488 in(12)
    • 0.492 in(59)
    • 0.496 in(13)
    • 0.5 in(59)
    • 0.504 in(23)
    • 0.508 in(15)
    • 0.512 in(54)
    • 0.515 in(1)
    • 0.516 in(35)
    • 0.52 in(8)
    • 0.524 in(14)
    • 0.528 in(7)
    • 0.531 in(60)
    • 0.535 in(8)
    • 0.539 in(15)
    • 0.543 in(19)
    • 0.547 in(16)
    • 0.551 in(63)
    • 0.555 in(19)
    • 0.559 in(16)
    • 0.564 in(56)
    • 0.568 in(7)
    • 0.572 in(46)
    • 0.576 in(11)
    • 0.578 in(11)
    • 0.579 in(11)
    • 0.583 in(12)
    • 0.587 in(5)
    • 0.591 in(51)
    • 0.594 in(5)
    • 0.595 in(17)
    • 0.598 in(13)
    • 0.6 in(3)
    • 0.602 in(16)
    • 0.606 in(11)
    • 0.609 in(5)
    • 0.61 in(36)
    • 0.614 in(10)
    • 0.618 in(12)
    • 0.622 in(16)
    • 0.625 in(38)
    • 0.626 in(8)
    • 0.63 in(53)
    • 0.633 in(3)
    • 0.634 in(10)
    • 0.635 in(1)
    • 0.638 in(11)
    • 0.641 in(4)
    • 0.642 in(7)
    • 0.646 in(8)
    • 0.65 in(36)
    • 0.654 in(5)
    • 0.656 in(14)
    • 0.657 in(7)
    • 0.661 in(9)
    • 0.665 in(3)
    • 0.669 in(41)
    • 0.672 in(1)
    • 0.673 in(7)
    • 0.677 in(5)
    • 0.681 in(4)
    • 0.685 in(3)
    • 0.687 in(5)
    • 0.689 in(21)
    • 0.69 in(39)
    • 0.694 in(7)
    • 0.698 in(9)
    • 0.702 in(6)
    • 0.704 in(5)
    • 0.705 in(6)
    • 0.709 in(41)
    • 0.713 in(5)
    • 0.717 in(5)
    • 0.719 in(5)
    • 0.72 in(4)
    • 0.724 in(4)
    • 0.728 in(26)
    • 0.732 in(6)
    • 0.734 in(5)
    • 0.736 in(7)
    • 0.74 in(7)
    • 0.744 in(4)
    • 0.748 in(31)
    • 0.75 in(24)
    • 0.752 in(4)
    • 0.754 in(1)
    • 0.756 in(6)
    • 0.758 in(2)
    • 0.76 in(5)
    • 0.764 in(5)
    • 0.766 in(2)
    • 0.768 in(21)
    • 0.772 in(2)
    • 0.776 in(7)
    • 0.78 in(7)
    • 0.781 in(3)
    • 0.784 in(4)
    • 0.787 in(35)
    • 0.807 in(3)
    • 0.81 in(1)
    • 0.828 in(8)
    • 0.866 in(1)
    • 0.906 in(2)
    • 0.946 in(2)
    • 0.965 in(1)
    • 0.984 in(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 0.0 mm(1)
    • 0.5 mm(2)
    • 0.601 mm(2)
    • 0.701 mm(2)
    • 0.8 mm(3)
    • 0.9 mm(3)
    • 1.0 mm(11)
    • 1.026 mm(3)
    • 1.05 mm(2)
    • 1.075 mm(3)
    • 1.1 mm(12)
    • 1.175 mm(2)
    • 1.201 mm(14)
    • 1.3 mm(11)
    • 1.326 mm(3)
    • 1.401 mm(14)
    • 1.5 mm(13)
    • 1.6 mm(13)
    • 1.701 mm(13)
    • 1.8 mm(13)
    • 1.901 mm(13)
    • 1.975 mm(5)
    • 2.0 mm(13)
    • 2.1 mm(13)
    • 2.2 mm(13)
    • 2.301 mm(13)
    • 2.375 mm(14)
    • 2.401 mm(21)
    • 2.45 mm(9)
    • 2.5 mm(41)
    • 2.526 mm(1)
    • 2.575 mm(7)
    • 2.6 mm(19)
    • 2.651 mm(7)
    • 2.7 mm(20)
    • 2.776 mm(9)
    • 2.801 mm(22)
    • 2.825 mm(7)
    • 2.875 mm(8)
    • 2.901 mm(19)
    • 2.95 mm(6)
    • 3.0 mm(61)
    • 3.051 mm(13)
    • 3.1 mm(32)
    • 3.151 mm(1)
    • 3.176 mm(54)
    • 3.2 mm(37)
    • 3.25 mm(1)
    • 3.276 mm(25)
    • 3.301 mm(45)
    • 3.401 mm(32)
    • 3.45 mm(28)
    • 3.475 mm(1)
    • 3.5 mm(54)
    • 3.551 mm(1)
    • 3.575 mm(20)
    • 3.6 mm(34)
    • 3.651 mm(11)
    • 3.7 mm(35)
    • 3.725 mm(15)
    • 3.801 mm(39)
    • 3.825 mm(1)
    • 3.85 mm(3)
    • 3.901 mm(32)
    • 3.95 mm(1)
    • 3.975 mm(46)
    • 4.0 mm(68)
    • 4.05 mm(19)
    • 4.075 mm(1)
    • 4.101 mm(44)
    • 4.125 mm(1)
    • 4.15 mm(2)
    • 4.2 mm(55)
    • 4.226 mm(11)
    • 4.3 mm(41)
    • 4.375 mm(16)
    • 4.4 mm(29)
    • 4.476 mm(1)
    • 4.5 mm(67)
    • 4.525 mm(1)
    • 4.55 mm(3)
    • 4.575 mm(3)
    • 4.601 mm(36)
    • 4.625 mm(13)
    • 4.65 mm(5)
    • 4.7 mm(34)
    • 4.75 mm(1)
    • 4.775 mm(50)
    • 4.801 mm(47)
    • 4.825 mm(5)
    • 4.851 mm(14)
    • 4.9 mm(32)
    • 4.926 mm(3)
    • 5.0 mm(70)
    • 5.025 mm(1)
    • 5.051 mm(5)
    • 5.075 mm(1)
    • 5.101 mm(77)
    • 5.15 mm(21)
    • 5.2 mm(48)
    • 5.25 mm(5)
    • 5.301 mm(33)
    • 5.4 mm(59)
    • 5.5 mm(61)
    • 5.525 mm(1)
    • 5.551 mm(53)
    • 5.575 mm(1)
    • 5.601 mm(41)
    • 5.625 mm(7)
    • 5.65 mm(1)
    • 5.7 mm(33)
    • 5.801 mm(56)
    • 5.9 mm(29)
    • 5.95 mm(18)
    • 6.0 mm(72)
    • 6.051 mm(1)
    • 6.101 mm(33)
    • 6.15 mm(1)
    • 6.2 mm(40)
    • 6.301 mm(29)
    • 6.351 mm(66)
    • 6.4 mm(30)
    • 6.426 mm(1)
    • 6.5 mm(62)
    • 6.525 mm(31)
    • 6.601 mm(36)
    • 6.625 mm(11)
    • 6.65 mm(2)
    • 6.7 mm(28)
    • 6.726 mm(1)
    • 6.75 mm(40)
    • 6.801 mm(58)
    • 6.9 mm(36)
    • 7.0 mm(69)
    • 7.025 mm(2)
    • 7.101 mm(27)
    • 7.15 mm(48)
    • 7.2 mm(21)
    • 7.301 mm(23)
    • 7.325 mm(1)
    • 7.375 mm(2)
    • 7.4 mm(37)
    • 7.5 mm(49)
    • 7.551 mm(31)
    • 7.601 mm(18)
    • 7.7 mm(21)
    • 7.801 mm(36)
    • 7.9 mm(17)
    • 7.95 mm(60)
    • 8.0 mm(73)
    • 8.025 mm(2)
    • 8.076 mm(1)
    • 8.1 mm(32)
    • 8.201 mm(32)
    • 8.3 mm(17)
    • 8.326 mm(37)
    • 8.4 mm(26)
    • 8.425 mm(22)
    • 8.5 mm(68)
    • 8.525 mm(1)
    • 8.55 mm(1)
    • 8.6 mm(30)
    • 8.701 mm(33)
    • 8.725 mm(46)
    • 8.8 mm(40)
    • 8.826 mm(1)
    • 8.85 mm(2)
    • 8.9 mm(15)
    • 9.0 mm(65)
    • 9.05 mm(1)
    • 9.1 mm(32)
    • 9.125 mm(35)
    • 9.201 mm(16)
    • 9.3 mm(26)
    • 9.35 mm(13)
    • 9.4 mm(19)
    • 9.5 mm(47)
    • 9.525 mm(59)
    • 9.55 mm(1)
    • 9.601 mm(17)
    • 9.701 mm(23)
    • 9.75 mm(7)
    • 9.8 mm(35)
    • 9.9 mm(19)
    • 9.925 mm(32)
    • 10.0 mm(71)
    • 10.101 mm(20)
    • 10.201 mm(58)
    • 10.25 mm(3)
    • 10.3 mm(31)
    • 10.326 mm(42)
    • 10.4 mm(22)
    • 10.5 mm(64)
    • 10.601 mm(17)
    • 10.701 mm(20)
    • 10.726 mm(45)
    • 10.8 mm(35)
    • 10.851 mm(1)
    • 10.9 mm(9)
    • 11.0 mm(61)
    • 11.025 mm(1)
    • 11.101 mm(19)
    • 11.125 mm(40)
    • 11.201 mm(27)
    • 11.3 mm(17)
    • 11.351 mm(1)
    • 11.4 mm(14)
    • 11.5 mm(84)
    • 11.55 mm(1)
    • 11.576 mm(1)
    • 11.601 mm(13)
    • 11.701 mm(24)
    • 11.8 mm(39)
    • 11.9 mm(38)
    • 12.0 mm(70)
    • 12.101 mm(20)
    • 12.201 mm(21)
    • 12.3 mm(49)
    • 12.4 mm(12)
    • 12.5 mm(59)
    • 12.601 mm(13)
    • 12.701 mm(59)
    • 12.8 mm(23)
    • 12.9 mm(15)
    • 13.0 mm(54)
    • 13.076 mm(1)
    • 13.101 mm(35)
    • 13.201 mm(8)
    • 13.3 mm(14)
    • 13.4 mm(7)
    • 13.5 mm(60)
    • 13.601 mm(8)
    • 13.701 mm(15)
    • 13.8 mm(19)
    • 13.9 mm(16)
    • 14.0 mm(63)
    • 14.101 mm(19)
    • 14.201 mm(16)
    • 14.3 mm(56)
    • 14.4 mm(7)
    • 14.5 mm(46)
    • 14.601 mm(11)
    • 14.675 mm(11)
    • 14.701 mm(11)
    • 14.8 mm(12)
    • 14.9 mm(5)
    • 15.0 mm(51)
    • 15.076 mm(5)
    • 15.101 mm(17)
    • 15.201 mm(13)
    • 15.25 mm(3)
    • 15.3 mm(16)
    • 15.4 mm(11)
    • 15.476 mm(5)
    • 15.5 mm(36)
    • 15.601 mm(10)
    • 15.701 mm(12)
    • 15.8 mm(16)
    • 15.875 mm(38)
    • 15.9 mm(8)
    • 16.0 mm(53)
    • 16.075 mm(3)
    • 16.1 mm(10)
    • 16.125 mm(1)
    • 16.2 mm(11)
    • 16.276 mm(4)
    • 16.3 mm(7)
    • 16.401 mm(8)
    • 16.5 mm(36)
    • 16.6 mm(5)
    • 16.675 mm(14)
    • 16.7 mm(7)
    • 16.8 mm(9)
    • 16.901 mm(3)
    • 17.0 mm(41)
    • 17.075 mm(1)
    • 17.1 mm(7)
    • 17.2 mm(5)
    • 17.3 mm(4)
    • 17.401 mm(3)
    • 17.45 mm(5)
    • 17.475 mm(21)
    • 17.5 mm(39)
    • 17.6 mm(7)
    • 17.7 mm(9)
    • 17.8 mm(6)
    • 17.85 mm(5)
    • 17.901 mm(6)
    • 18.0 mm(41)
    • 18.1 mm(5)
    • 18.2 mm(5)
    • 18.25 mm(5)
    • 18.3 mm(4)
    • 18.401 mm(4)
    • 18.5 mm(26)
    • 18.6 mm(6)
    • 18.651 mm(5)
    • 18.7 mm(7)
    • 18.8 mm(7)
    • 18.901 mm(4)
    • 19.0 mm(31)
    • 19.05 mm(24)
    • 19.1 mm(4)
    • 19.151 mm(1)
    • 19.201 mm(6)
    • 19.25 mm(2)
    • 19.3 mm(5)
    • 19.401 mm(5)
    • 19.451 mm(2)
    • 19.5 mm(21)
    • 19.6 mm(2)
    • 19.701 mm(7)
    • 19.8 mm(7)
    • 19.85 mm(3)
    • 19.901 mm(4)
    • 20.0 mm(35)
    • 20.5 mm(3)
    • 20.576 mm(1)
    • 21.0 mm(8)
    • 22.0 mm(1)
    • 23.0 mm(2)
    • 24.0 mm(2)
    • 24.5 mm(1)
    • 25.0 mm(1)
    Cutting Diameter MintoCutting Diameter Max