Notifications

Mark all as read

Slotting Mills

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Applications
  • Face Milling Face Milling (5)
  • ID Thread Turning ID Thread Turning (1)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (40)
  • Shoulder Milling Shoulder Milling (46)
  • Shoulder Square End Shoulder Square End (45)
  • Slot Milling Slot Milling (250)
  • Slot Side Slot Side (250)
  • Slot Square End Slot Square End (74)
  • Slot T Slot T (5)
Workpiece Material
  • P Steel (539)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (515)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (515)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (515)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (515)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (520)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (536)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (536)
  • M Stainless Steel (531)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (531)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (531)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (531)
  • K Cast Iron (424)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (424)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (424)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (424)
  • N Non-Ferrous Materials (281)
    • N1
      Wrought Aluminum
      (281)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (281)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (281)
  • S High-Temp Alloys (505)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (443)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (443)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (443)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (505)
  • H Hardened Materials (213)
    • H1
      Hardened Materials 44-48 HRC
      (213)
Maximum Cutting Diameter
  • 2.5 (2)
  • 3.0 (2)
  • 4.0 (6)
  • 4.009 (2)
  • 4.011 (2)
  • 5.0 (4)
  • 5.009 (1)
  • 5.011 (1)
  • 6.0 (3)
  • 6.009 (1)
  • 6.011 (1)
  • 8.0 (2)
  • 8.009 (1)
  • 8.011 (1)
to
Maximum Cutting Diameter
  • 101.817 (2)
  • 101.89 (2)
  • 127.217 (1)
  • 127.29 (1)
  • 152.617 (1)
  • 152.69 (1)
  • 203.417 (1)
  • 203.467 (1)
to
Cutting Diameter
  • 21.0 (1)
  • 25.0 (1)
  • 32.0 (1)
  • 40.0 (1)
  • 50.0 (1)
  • 63.0 (4)
  • 63.5 (5)
  • 76.2 (10)
  • 80.0 (10)
  • 100.0 (29)
  • 101.59 (1)
  • 101.6 (30)
  • 125.0 (42)
  • 126.99 (1)
  • 127.0 (25)
  • 152.39 (1)
  • 152.4 (19)
  • 160.0 (38)
  • 200.0 (24)
  • 203.19 (1)
  • 203.2 (16)
  • 250.0 (15)
  • 254.0 (8)
  • 304.8 (4)
  • 315.0 (7)
to
Cutting Diameter
  • 0.8268 (1)
  • 0.9843 (1)
  • 1.2598 (1)
  • 1.5748 (1)
  • 1.9685 (1)
  • 2.48 (4)
  • 2.5 (5)
  • 3.0 (10)
  • 3.1496 (4)
  • 3.15 (6)
  • 3.937 (29)
  • 4.0 (31)
  • 4.921 (31)
  • 4.9213 (11)
  • 5.0 (26)
  • 6.0 (20)
  • 6.299 (26)
  • 6.2992 (6)
  • 6.3 (6)
  • 7.874 (24)
  • 8.0 (17)
  • 9.842 (6)
  • 9.8425 (3)
  • 9.843 (6)
  • 10.0 (8)
  • 12.0 (4)
  • 12.401 (7)
to
Cutting Length
  • 0.063 (8)
  • 0.0866 (4)
  • 0.087 (4)
  • 0.118 (7)
  • 0.1181 (7)
  • 0.157 (3)
  • 0.1575 (10)
  • 0.161 (2)
  • 0.187 (4)
  • 0.1969 (3)
  • 0.197 (1)
  • 0.236 (3)
  • 0.2362 (2)
  • 0.25 (7)
  • 0.312 (6)
  • 0.315 (2)
  • 0.3543 (1)
  • 0.359 (23)
  • 0.375 (5)
  • 0.3937 (2)
  • 0.4331 (1)
  • 0.4606 (1)
  • 0.461 (21)
  • 0.4724 (1)
  • 0.5 (5)
  • 0.551 (12)
  • 0.5512 (1)
  • 0.619 (6)
  • 0.623 (5)
  • 0.63 (10)
  • 0.7087 (2)
  • 0.709 (15)
  • 0.739 (2)
  • 0.744 (3)
  • 0.781 (3)
  • 0.813 (12)
  • 0.8661 (1)
to
Cutting Length
  • 1.6 (8)
  • 2.2 (8)
  • 3.0 (14)
  • 4.0 (13)
  • 4.089 (2)
  • 4.75 (4)
  • 5.0 (4)
  • 6.0 (5)
  • 6.35 (1)
  • 6.36 (6)
  • 7.925 (1)
  • 7.93 (5)
  • 8.0 (2)
  • 9.0 (1)
  • 9.11 (9)
  • 9.119 (14)
  • 9.53 (5)
  • 10.0 (2)
  • 11.0 (1)
  • 11.7 (12)
  • 11.709 (10)
  • 12.0 (1)
  • 12.7 (5)
  • 13.995 (4)
  • 14.0 (9)
  • 15.723 (3)
  • 15.725 (3)
  • 15.82 (3)
  • 15.83 (2)
  • 16.0 (9)
  • 16.002 (1)
  • 18.0 (11)
  • 18.009 (6)
  • 18.77 (2)
  • 18.898 (3)
  • 19.83 (1)
  • 19.84 (2)
  • 20.65 (12)
  • 22.0 (1)
to
Reach
  • 29.0 (1)
  • 32.0 (1)
  • 38.0 (1)
  • 38.1 (1)
  • 44.45 (1)
  • 45.25 (1)
  • 45.5 (1)
  • 46.25 (1)
  • 50.0 (18)
  • 50.8 (4)
  • 50.83 (12)
  • 51.04 (11)
  • 51.05 (1)
  • 51.8 (1)
  • 52.15 (1)
  • 52.5 (1)
  • 52.629 (1)
  • 52.9 (1)
  • 53.162 (2)
  • 53.35 (1)
  • 60.0 (1)
  • 61.35 (1)
  • 61.7 (1)
  • 62.1 (1)
  • 62.55 (1)
to
Reach
  • 1.1417 (1)
  • 1.2598 (1)
  • 1.4961 (1)
  • 1.5 (1)
  • 1.75 (1)
  • 1.781 (1)
  • 1.791 (1)
  • 1.821 (1)
  • 1.9685 (9)
  • 1.969 (9)
  • 2.0 (4)
  • 2.001 (12)
  • 2.009 (11)
  • 2.01 (1)
  • 2.039 (1)
  • 2.053 (1)
  • 2.067 (1)
  • 2.072 (1)
  • 2.093 (2)
  • 2.1 (1)
  • 2.3622 (1)
  • 2.415 (1)
  • 2.429 (1)
  • 2.445 (1)
  • 2.463 (1)
  • 83.0 (1)
to
Tool Cutting Edge Angle
  • 90.0 (299)
to
Connection Style
  • 2 Key & Cutter Retention Screw (73)
  • 2 Key & Socket Head Cap Screw (89)
  • A-Socket Head Cap Screw (29)
  • B-Cutter Retention Screw (32)
  • C-Bolt Circle (7)
  • Weldon (5)
Cutting Edges Per Insert
  • 1.0 (161)
  • 2.0 (150)
  • 4.0 (406)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.0 (81)
  • 0.15 (40)
  • 0.2 (107)
  • 0.3 (62)
  • 0.4 (201)
  • 0.79 (45)
  • 0.794 (175)
  • 0.8 (118)
  • 1.19 (103)
  • 1.191 (69)
  • 1.2 (60)
  • 1.5 (12)
  • 1.588 (45)
  • 1.59 (162)
  • 1.6 (88)
  • 1.98 (121)
  • 1.984 (45)
  • 2.0 (14)
  • 2.38 (62)
  • 2.4 (59)
  • 3.18 (94)
  • 3.2 (59)
  • 4.76 (59)
  • 6.32 (59)
  • 6.35 (62)
to
Corner Radius
  • 0.0 (81)
  • 0.0059 (13)
  • 0.006 (27)
  • 0.0079 (46)
  • 0.008 (61)
  • 0.0118 (7)
  • 0.012 (55)
  • 0.0156 (60)
  • 0.0157 (4)
  • 0.016 (193)
  • 0.031 (91)
  • 0.0312 (48)
  • 0.0313 (177)
  • 0.0468 (58)
  • 0.0469 (69)
  • 0.047 (48)
  • 0.059 (12)
  • 0.062 (109)
  • 0.0625 (128)
  • 0.063 (20)
  • 0.078 (63)
  • 0.0781 (103)
  • 0.079 (14)
  • 0.094 (64)
  • 0.125 (96)
  • 0.188 (59)
  • 0.25 (64)
  • 0.312 (48)
  • 0.313 (51)
to
Corner Chamfer
  • 0.0 (608)
  • 0.0059 (4)
to
Corner Chamfer
  • 0.0 (608)
  • 0.15 (4)
to
Application
Grade Of Cutting Tool
  • K110M (17)
  • K125M (13)
  • K2885 (25)
  • K8735 (19)
  • KC410M (126)
  • KC505M (3)
  • KC510M (16)
  • KC520M (189)
  • KC522M (132)
  • KC710 (25)
  • KC715M (52)
  • KC725M (246)
  • KC730 (25)
  • KC730M (8)
  • KC735M (181)
  • KC792M (84)
  • KC915M (57)
  • KC920M (99)
  • KC925M (137)
  • KC930M (56)
  • KC935M (73)
  • KCK15 (179)
  • KCK20B (152)
  • KCPK30 (326)
  • KCPM20 (107)
  • KCPM40 (275)
  • KCSM30 (113)
  • KCSM40 (76)
  • KCU25 (92)
  • KMF (43)
  • KTPK20 (90)
  • KUC20M (45)
  • KUC30M (45)
  • KY1335 (45)
  • KY3500 (57)
  • TN5515 (4)
Hand Of Tool
  • L (24)
  • N (217)
  • R (54)
Wiper Insert
  • N (317)
Front-End
Clamp Style
  • S (4)
Insert Shape
  • L-RECTANGLE ON EDGE 90 (99)
  • PRISMATIC (192)
  • S-SQUARE 90 (278)
  • S-SQUARE ON EDGE 90 (47)
Cutting Width
  • 1.59 (13)
  • 1.6 (5)
  • 2.01 (8)
  • 2.2 (3)
  • 2.21 (14)
  • 2.25 (2)
  • 2.39 (8)
  • 2.5 (13)
  • 3.01 (18)
  • 3.05 (5)
  • 3.18 (19)
  • 4.0 (18)
  • 4.01 (18)
  • 4.05 (6)
  • 4.089 (2)
  • 4.75 (4)
  • 4.78 (12)
  • 5.0 (3)
  • 5.01 (15)
  • 5.05 (1)
  • 6.0 (9)
  • 6.01 (18)
  • 6.05 (2)
  • 6.35 (1)
  • 6.36 (24)
  • 7.925 (1)
  • 7.93 (5)
  • 8.0 (7)
  • 9.0 (1)
  • 9.53 (4)
  • 9.535 (1)
  • 10.0 (5)
  • 11.0 (1)
  • 12.0 (2)
  • 12.7 (5)
  • 13.995 (4)
  • 14.0 (9)
  • 15.596 (6)
  • 15.83 (5)
  • 16.0 (9)
  • 16.002 (1)
  • 18.0 (11)
  • 18.009 (6)
  • 18.77 (4)
  • 18.898 (1)
  • 19.83 (3)
  • 20.65 (12)
  • 22.0 (1)
to
Cutting Width
  • 0.063 (18)
  • 0.079 (8)
  • 0.0866 (4)
  • 0.087 (15)
  • 0.094 (8)
  • 0.099 (13)
  • 0.118 (12)
  • 0.119 (17)
  • 0.1201 (4)
  • 0.125 (19)
  • 0.157 (14)
  • 0.1575 (4)
  • 0.158 (18)
  • 0.159 (2)
  • 0.1595 (5)
  • 0.161 (2)
  • 0.187 (4)
  • 0.188 (12)
  • 0.1969 (3)
  • 0.197 (15)
  • 0.1988 (1)
  • 0.236 (18)
  • 0.2362 (9)
  • 0.2382 (2)
  • 0.25 (25)
  • 0.312 (6)
  • 0.315 (7)
  • 0.3543 (1)
  • 0.375 (5)
  • 0.3937 (5)
  • 0.4331 (1)
  • 0.4724 (2)
  • 0.5 (5)
  • 0.551 (12)
  • 0.5512 (1)
  • 0.614 (6)
  • 0.623 (5)
  • 0.63 (10)
  • 0.7087 (2)
  • 0.709 (15)
  • 0.739 (4)
  • 0.744 (1)
  • 0.781 (3)
  • 0.813 (12)
  • 0.8661 (1)
to
Maximum Cutting Depth
  • 5.25 (1)
  • 6.25 (1)
  • 8.25 (1)
  • 9.54 (10)
  • 9.75 (1)
  • 11.75 (1)
  • 14.22 (1)
  • 14.224 (1)
  • 15.0 (4)
  • 15.08 (1)
  • 15.748 (1)
  • 15.875 (2)
  • 16.0 (3)
  • 21.0 (4)
  • 22.0 (4)
  • 22.149 (1)
  • 22.22 (2)
  • 22.225 (6)
  • 22.53 (1)
  • 22.96 (1)
  • 23.01 (1)
  • 23.75 (1)
  • 23.92 (4)
  • 24.41 (3)
  • 24.55 (1)
  • 24.7 (3)
  • 25.0 (3)
  • 25.273 (1)
  • 25.324 (1)
  • 25.7 (3)
  • 25.87 (3)
  • 26.0 (1)
  • 26.137 (1)
  • 26.162 (1)
  • 26.3 (1)
  • 26.36 (1)
  • 26.365 (2)
  • 26.467 (1)
  • 26.7 (1)
  • 26.92 (1)
  • 27.0 (9)
  • 27.77 (2)
  • 27.78 (2)
  • 28.448 (2)
  • 28.7 (1)
  • 29.36 (6)
  • 30.0 (5)
  • 31.84 (1)
  • 31.91 (7)
  • 31.912 (3)
  • 32.0 (1)
  • 32.2 (5)
  • 33.807 (1)
  • 34.0 (4)
  • 34.366 (1)
  • 34.37 (3)
  • 34.468 (1)
  • 34.8 (1)
  • 34.86 (1)
  • 34.92 (2)
  • 34.925 (2)
  • 35.0 (4)
  • 35.66 (1)
  • 36.45 (1)
  • 36.525 (2)
  • 37.25 (1)
  • 38.1 (2)
  • 38.2 (6)
  • 38.89 (6)
  • 39.625 (1)
  • 40.0 (3)
  • 43.0 (3)
  • 43.41 (7)
  • 44.0 (3)
  • 44.37 (1)
  • 44.45 (1)
  • 45.96 (1)
  • 46.0 (3)
  • 46.507 (2)
  • 46.84 (1)
  • 46.863 (1)
  • 47.015 (2)
  • 47.168 (2)
  • 47.71 (4)
  • 48.71 (1)
  • 50.8 (1)
  • 51.0 (5)
  • 51.5 (4)
  • 51.537 (1)
  • 51.562 (1)
  • 51.87 (4)
  • 52.17 (1)
  • 52.2 (1)
  • 52.55 (4)
  • 53.41 (5)
  • 57.15 (1)
  • 58.4 (1)
  • 58.41 (2)
  • 60.0 (3)
  • 62.0 (1)
  • 63.906 (1)
  • 64.262 (1)
  • 64.414 (2)
  • 64.5 (2)
  • 64.567 (1)
  • 64.87 (2)
  • 65.17 (3)
  • 65.18 (2)
  • 65.2 (1)
  • 65.3 (2)
  • 65.55 (2)
  • 69.06 (1)
  • 69.85 (2)
  • 70.65 (1)
  • 71.0 (5)
  • 73.03 (1)
  • 82.55 (2)
  • 84.125 (1)
  • 85.0 (1)
  • 86.0 (2)
  • 89.306 (1)
  • 89.5 (1)
  • 89.814 (1)
  • 89.87 (2)
  • 89.967 (1)
  • 90.4 (1)
  • 90.55 (2)
  • 90.58 (1)
  • 90.9 (1)
  • 90.91 (2)
  • 91.27 (1)
  • 91.57 (1)
  • 96.0 (3)
  • 114.5 (3)
  • 114.706 (2)
  • 114.87 (1)
  • 115.062 (1)