LN Series Slotting Mill Cutters
The LN slotting mill cutter series is a fantastic solution for narrow slotting applications. The LN slotting cutters come in both arbor and shell mill cutter options, accommodating groove widths ranging from .250 to .539 inches and cutter diameters spanning from 3 to 8 inches. One of its standout features is the radial adjustment in .020-inch increments, allowing for precise customization to meet specific machining requirements. With staggered internal keys and positive chip grooves, LN slot cutters ensure efficient chip evacuation and enhanced cutting performance. The ease of width adjustment through insert thickness further simplifies setup and operation, while enabling full side and face cutting capabilities. Additionally, these slot mill cutters can be used with neutral and positive chip-forming inserts. They feature four cutting edges for extended tool life and reduced downtime. Experience the unparalleled precision and efficiency of the LN slotting cutter series.
- P Steel (70)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(70)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(70)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(70)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(70)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(70)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(70)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(70)
- M Stainless Steel (70)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(70)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(70)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(70)
- K Cast Iron (62)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(62)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(62)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(62)
- S High-Temp Alloys (70)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(67)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(67)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(67)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(70)
Slot Milling (38)
Slot Side (38)
- 63.5 mm(2)
- 76.2 mm(1)
- 80.0 mm(3)
- 100.0 mm(4)
- 101.59 mm(1)
- 101.6 mm(7)
- 125.0 mm(2)
- 126.99 mm(1)
- 127.0 mm(3)
- 152.39 mm(1)
- 152.4 mm(3)
- 160.0 mm(6)
- 203.19 mm(1)
- 203.2 mm(3)
- 101.817 mm(2)
- 101.89 mm(2)
- 127.217 mm(1)
- 127.29 mm(1)
- 152.617 mm(1)
- 152.69 mm(1)
- 203.417 mm(1)
- 203.467 mm(1)
- 6.0 mm(7)
- 6.35 mm(1)
- 6.36 mm(6)
- 7.925 mm(1)
- 7.93 mm(5)
- 8.0 mm(4)
- 9.53 mm(5)
- 10.0 mm(3)
- 12.0 mm(1)
- 12.7 mm(5)
- 50.0 mm(8)
- 90.0 (38)
- 2 Key & Cutter Retention Screw (7)
- 2 Key & Socket Head Cap Screw (17)
- A-Socket Head Cap Screw (14)
- 3 (6)
- 4 (7)
- 5 (13)
- 6 (5)
- 8 (5)
- 9 (2)
- 50.0 mm(8)
- 0.3 mm(28)
- 0.4 mm(47)
- 0.8 mm(48)
- 1.6 mm(37)
- 3.175 mm(28)
- KC520M (47)
- KC725M (64)
- KC735M (1)
- KCK15 (36)
- KCK20B (47)
- KCPK30 (28)
- KCPM40 (49)
- N (24)
- R (14)
- N (64)
- 6.0 mm(7)
- 6.35 mm(1)
- 6.36 mm(6)
- 7.925 mm(1)
- 7.93 mm(5)
- 8.0 mm(4)
- 9.53 mm(4)
- 9.535 mm(1)
- 10.0 mm(3)
- 12.0 mm(1)
- 12.7 mm(5)
- 14.22 mm(1)
- 14.224 mm(1)
- 15.08 mm(1)
- 16.0 mm(3)
- 22.0 mm(4)
- 22.96 mm(1)
- 23.75 mm(1)
- 23.92 mm(4)
- 24.55 mm(1)
- 26.0 mm(1)
- 26.92 mm(1)
- 30.0 mm(1)
- 35.66 mm(1)
- 36.45 mm(1)
- 37.25 mm(1)
- 39.625 mm(1)
- 43.0 mm(3)
- 44.37 mm(1)
- 44.45 mm(1)
- 45.96 mm(1)
- 46.0 mm(3)
- 46.84 mm(1)
- 69.06 mm(1)
- 69.85 mm(1)
- 70.65 mm(1)
- 73.03 mm(1)
- L-RECTANGLE ON EDGE 90 (64)
- 9.525 mm(1)
- 3.5 mm(7)
- 4.0 mm(12)
- 4.5 mm(24)
- 5.0 mm(8)
- 5.5 mm(10)
- 6.0 mm(3)
- GP (8)
- H W (64)
- E (64)
- ARBOR (24)
- SHELL MILL (14)
- 19.07 mm(2)
- 22.0 mm(2)
- 25.4 mm(5)
- 27.0 mm(3)
- 31.769 mm(2)
- 31.8 mm(6)
- 32.0 mm(2)
- 38.1 mm(6)
- 38.119 mm(2)
- 40.0 mm(8)
