PSC

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Applications
  • Back Boring Back Boring (350)
  • Chamfer Turning Chamfer Turning (34)
  • Cut-Off Cut-Off (309)
  • Deep Grooving Deep Grooving (336)
  • Face Grooving Face Grooving (350)
  • Facing Facing (323)
  • Grooving Grooving (333)
  • ID Facing ID Facing (323)
  • ID Grooving ID Grooving (350)
  • ID Thread Turning ID Thread Turning (323)
  • Multiple Direction Cutting Multiple Direction Cutting (356)
  • OD Thread Turning OD Thread Turning (323)
  • Plunge Turning Plunge Turning (257)
  • Profiling Profiling (200)
  • TRN Boring TRN Boring (350)
  • Turning Turning (311)
Tool Cutting Edge Angle
  • 45.0 (21)
  • 62.5 (4)
  • 72.5 (3)
  • 75.0 (31)
  • 90.0 (124)
  • 93.0 (82)
  • 95.0 (88)
  • 107.5 (30)
to
Internal Coolant Capability
Application
Minimum Axial Groove Diameter
  • 0.0 (8)
  • 0.7283 (2)
  • 0.748 (2)
  • 0.7874 (10)
  • 0.9449 (3)
  • 0.9646 (1)
  • 0.9843 (13)
  • 1.2598 (29)
  • 1.2992 (4)
  • 1.3189 (2)
  • 1.3386 (2)
  • 1.5157 (6)
  • 1.5748 (31)
  • 1.8898 (4)
  • 1.9094 (6)
  • 1.9685 (30)
  • 1.969 (2)
  • 2.0669 (1)
  • 2.0866 (2)
  • 2.4409 (4)
  • 2.48 (2)
  • 2.4803 (13)
  • 2.5197 (2)
  • 2.5591 (6)
  • 2.5787 (1)
  • 2.5984 (2)
  • 2.6772 (1)
  • 2.9525 (1)
  • 2.9528 (3)
  • 3.1496 (2)
  • 3.189 (3)
  • 3.5433 (9)
  • 4.3307 (64)
  • 4.331 (8)
  • 4.921 (2)
  • 4.9213 (23)
  • 5.9449 (2)
  • 6.4961 (7)
  • 6.6929 (1)
  • 7.087 (2)
  • 8.2677 (2)
  • 8.465 (2)
  • 8.7795 (2)
to
Minimum Axial Groove Diameter
  • 18.5 (2)
  • 19.0 (2)
  • 20.0 (10)
  • 24.0 (3)
  • 24.5 (1)
  • 25.0 (13)
  • 32.0 (29)
  • 33.0 (4)
  • 33.5 (2)
  • 34.0 (2)
  • 38.5 (6)
  • 40.0 (31)
  • 48.0 (4)
  • 48.5 (6)
  • 50.0 (32)
  • 52.5 (1)
  • 53.0 (2)
  • 62.0 (4)
  • 63.0 (15)
  • 64.0 (2)
  • 65.0 (6)
  • 65.5 (1)
  • 66.0 (2)
  • 68.0 (1)
  • 75.0 (4)
  • 80.0 (2)
  • 81.0 (3)
  • 90.0 (9)
  • 110.0 (72)
  • 125.0 (25)
  • 151.0 (2)
  • 165.0 (7)
  • 170.0 (1)
  • 180.0 (2)
  • 215.0 (2)
  • 223.0 (2)
  • 510.0 (2)
to
Maximum Bore Depth
  • 34.8 (2)
  • 36.0 (4)
  • 36.8 (2)
  • 42.0 (4)
  • 46.0 (4)
  • 47.0 (4)
  • 48.0 (2)
  • 48.84 (1)
  • 48.87 (1)
  • 50.0 (1)
  • 51.0 (2)
  • 52.0 (18)
  • 54.0 (2)
  • 56.0 (9)
  • 60.0 (44)
  • 62.0 (4)
  • 63.8 (2)
  • 64.0 (8)
  • 64.12 (2)
  • 64.4 (2)
  • 65.0 (56)
  • 66.0 (6)
  • 67.0 (13)
  • 68.0 (4)
  • 72.0 (2)
  • 74.0 (4)
  • 80.0 (10)
  • 80.3 (1)
  • 83.29 (2)
  • 84.0 (8)
  • 88.0 (9)
  • 88.4 (2)
  • 89.0 (2)
  • 94.0 (2)
  • 98.18 (2)
  • 99.32 (2)
  • 100.0 (4)
  • 105.6 (2)
  • 110.2 (2)
  • 111.0 (1)
  • 111.02 (1)
  • 113.0 (5)
  • 114.0 (4)
  • 114.12 (2)
  • 115.0 (4)
  • 115.1 (2)
  • 118.0 (2)
  • 119.0 (9)
  • 120.0 (1)
  • 150.0 (5)
  • 152.0 (5)
to
Maximum Bore Depth
  • 1.3701 (2)
  • 1.4173 (4)
  • 1.4488 (2)
  • 1.6535 (4)
  • 1.811 (4)
  • 1.8504 (4)
  • 1.8898 (2)
  • 1.9228 (1)
  • 1.924 (1)
  • 1.9685 (1)
  • 2.0079 (2)
  • 2.0472 (18)
  • 2.126 (2)
  • 2.2047 (9)
  • 2.3622 (44)
  • 2.4409 (4)
  • 2.5118 (2)
  • 2.5197 (8)
  • 2.524 (2)
  • 2.5354 (2)
  • 2.559 (14)
  • 2.5591 (42)
  • 2.5984 (6)
  • 2.6378 (13)
  • 2.6772 (4)
  • 2.8346 (2)
  • 2.9134 (4)
  • 3.1496 (10)
  • 3.1614 (1)
  • 3.279 (2)
  • 3.3071 (8)
  • 3.4646 (9)
  • 3.4803 (2)
  • 3.5039 (2)
  • 3.7008 (2)
  • 3.865 (2)
  • 3.91 (2)
  • 3.937 (4)
  • 4.1575 (2)
  • 4.3386 (2)
  • 4.3701 (1)
  • 4.3709 (1)
  • 4.4488 (5)
  • 4.4882 (4)
  • 4.493 (2)
  • 4.5276 (4)
  • 4.531 (2)
  • 4.6457 (2)
  • 4.685 (9)
  • 4.7244 (1)
  • 5.9055 (5)
  • 5.9843 (5)
to
Front-End
Clamp Style
  • D (112)
  • N (73)
  • P (94)
  • S (104)
Adapter Front-End
  • BORING BAR ADAPTER (4)
  • CARTRIDGE MOUNT (16)
  • END MILL ADAPTER (30)
  • ER COLLET CHUCK (14)
  • EXTENSION (5)
  • HYDRAULIC CHUCK (18)
  • HYRAULIC CHUCK-HIGH TORQUE (4)
  • KM MODULAR ADAPTER (12)
  • MODULAR ADAPTER (15)
  • RC TAP CHUCK ADAPTER-T & C (4)
  • REDUCER (2)
  • SHELL MILL ADAPTER (18)
  • SHRINK FIT ADAPTER (18)
  • SQUARE SHANK ADAPTER (21)
  • WHISTLE NOTCH ADAPTER (1)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (93)
  • D-DIAMOND/RHOMBIC 55 (68)
  • LT-TRIANGLE LAY DOWN THREAD 60 (44)
  • N/K-PARALLELOGRAM 55 (2)
  • R-ROUND (26)
  • S-SQUARE 90 (35)
  • T-TRIANGLE 60 (3)
  • TN-TOP NOTCH (53)
  • V-DIAMOND/RHOMBIC 35 (49)
  • W-TRIGON 80 (10)
Front End Type
  • CCS - PSC (22)
  • DLK - DUO-LOCK Modular Connect (12)
  • FDA - Milling Cutter Arbor (18)
  • KMT - KM Adapter (12)
  • MCS - Modular Cartridge System (16)
  • SWB - Tap Chuck Adapter (4)
  • SZK - Collet Taper (14)
  • VKT - Square Shank (21)
  • ZYL - Cylindrical Adapter (75)
Maximum Cutting Depth
  • 3.51 (10)
  • 5.33 (23)
  • 7.47 (16)
  • 12.01 (2)
  • 16.0 (1)
  • 25.0 (2)
  • 28.0 (2)
  • 32.0 (1)
  • 35.0 (1)
to
Maximum Cutting Depth
  • 0.1382 (10)
  • 0.2098 (17)
  • 0.21 (6)
  • 0.291 (1)
  • 0.294 (1)
  • 0.2941 (14)
  • 0.4728 (2)
  • 0.6299 (1)
  • 0.9843 (2)
  • 1.1024 (2)
  • 1.2598 (1)
  • 1.378 (1)
to
Insert Size
  • 2 (12)
  • 3 (25)
  • 4 (16)
Front End Style
  • CCS01 Std Design (22)
  • DLK01 DUO-LOCK (12)
  • FDA22 Transv Drive & SHCS (18)
  • KMT00 All KM, except 02,05,09 (12)
  • MCS01 Modular Deep Grooving (16)
  • SWB-01 WFL#...WES#(Bilz) (4)
  • SZK02 Collets 8 Degree Taper (14)
  • VKT01 Std Design (21)
  • ZYL01 Straight Shank (40)
  • ZYL13 2Deg-Whistle Notch (11)
  • ZYL14 Weldon+Whistle Notch (19)
  • ZYL22 Boring Bar Shank (4)
  • ZYL63 2Deg Surf w/Cyl.w/drive (1)
Gage Length
  • 23.0000 (4)
  • 25.0000 (7)
  • 26.0000 (1)
  • 28.0000 (4)
  • 30.0000 (6)
  • 34.0000 (2)
  • 35.0000 (1)
  • 38.0000 (2)
  • 40.0000 (7)
  • 40.9500 (1)
  • 42.0000 (1)
  • 43.0000 (2)
  • 45.0000 (2)
  • 45.6000 (1)
  • 48.0000 (2)
  • 48.7000 (1)
  • 49.0000 (2)
  • 50.0000 (4)
  • 50.8000 (2)
  • 55.0000 (3)
  • 55.5000 (4)
  • 57.1500 (2)
  • 60.0000 (13)
  • 60.4500 (1)
  • 60.5000 (2)
  • 63.5000 (2)
  • 65.0000 (11)
  • 65.5000 (2)
  • 68.0000 (1)
  • 69.0000 (1)
  • 69.8500 (1)
  • 70.0000 (7)
  • 75.0000 (5)
  • 77.0000 (1)
  • 80.0000 (34)
  • 85.0000 (11)
  • 88.0000 (1)
  • 88.9000 (1)
  • 90.0000 (11)
  • 95.0000 (6)
  • 95.2500 (1)
  • 100.0000 (9)
  • 105.0000 (1)
  • 120.0000 (1)
  • 122.0000 (1)
  • 140.0000 (2)
  • 150.0000 (2)
  • 155.0000 (2)
  • 192.0000 (1)
Gage Length
  • 0.9060 (4)
  • 0.9800 (2)
  • 0.9840 (2)
  • 0.9843 (3)
  • 1.0236 (1)
  • 1.1000 (2)
  • 1.1024 (2)
  • 1.1810 (1)
  • 1.1811 (5)
  • 1.3386 (2)
  • 1.3780 (1)
  • 1.4960 (1)
  • 1.5000 (1)
  • 1.5748 (7)
  • 1.6120 (1)
  • 1.6535 (1)
  • 1.6930 (2)
  • 1.7717 (2)
  • 1.7950 (1)
  • 1.8900 (2)
  • 1.9173 (1)
  • 1.9290 (2)
  • 1.9685 (4)
  • 2.0000 (2)
  • 2.1650 (3)
  • 2.1850 (4)
  • 2.2500 (2)
  • 2.3620 (4)
  • 2.3622 (7)
  • 2.3700 (2)
  • 2.3800 (1)
  • 2.3820 (2)
  • 2.5000 (2)
  • 2.5590 (7)
  • 2.5591 (2)
  • 2.5600 (2)
  • 2.5790 (2)
  • 2.6770 (1)
  • 2.7165 (1)
  • 2.7500 (1)
  • 2.7559 (2)
  • 2.7560 (5)
  • 2.9530 (5)
  • 3.0315 (1)
  • 3.1496 (17)
  • 3.1500 (17)
  • 3.3460 (1)
  • 3.3465 (6)
  • 3.3500 (4)
  • 3.4646 (1)
  • 3.5000 (1)
  • 3.5400 (2)
  • 3.5430 (2)
  • 3.5433 (6)
  • 3.5500 (1)
  • 3.7400 (3)
  • 3.7402 (3)
  • 3.7500 (1)
  • 3.9370 (9)
  • 4.1339 (1)
  • 4.7244 (1)
  • 4.8031 (1)
  • 5.5118 (2)
  • 5.9055 (2)
  • 6.1024 (2)
  • 7.5591 (1)
Front End Size
  • 3.0 (1)
  • 4.0 (1)
  • 5.0 (1)
  • 6.0 (4)
  • 6.35 (1)
  • 8.0 (4)
  • 9.52 (2)
  • 9.525 (1)
  • 10.0 (4)
  • 12.0 (4)
  • 12.7 (3)
  • 14.0 (5)
  • 15.875 (2)
  • 15.88 (1)
  • 16.0 (7)
  • 18.0 (5)
  • 19.0 (2)
  • 19.04 (5)
  • 19.05 (4)
  • 20.0 (7)
  • 22.0 (3)
  • 22.22 (1)
  • 25.0 (5)
  • 25.39 (2)
  • 25.4 (3)
  • 27.0 (2)
  • 31.0 (1)
  • 31.74 (2)
  • 31.75 (2)
  • 31.758 (1)
  • 32.0 (6)
  • 38.0 (1)
  • 38.091 (1)
  • 38.1 (1)
  • 40.0 (3)
  • 48.0 (1)
  • 50.0 (12)
  • 63.0 (11)
  • 80.0 (2)
to
Front End Size
  • 0.1181 (1)
  • 0.1575 (1)
  • 0.1969 (1)
  • 0.236 (2)
  • 0.2362 (2)
  • 0.25 (1)
  • 0.315 (4)
  • 0.375 (3)
  • 0.3937 (2)
  • 0.394 (2)
  • 0.472 (1)
  • 0.4724 (2)
  • 0.473 (1)
  • 0.5 (3)
  • 0.551 (2)
  • 0.5512 (3)
  • 0.625 (3)
  • 0.6299 (4)
  • 0.63 (3)
  • 0.7087 (3)
  • 0.709 (2)
  • 0.748 (2)
  • 0.75 (9)
  • 0.787 (1)
  • 0.7874 (3)
  • 0.788 (2)
  • 0.79 (1)
  • 0.866 (1)
  • 0.8661 (2)
  • 0.875 (1)
  • 0.98 (1)
  • 0.984 (1)
  • 0.9843 (3)
  • 1.0 (5)
  • 1.063 (2)
  • 1.2205 (1)
  • 1.25 (5)
  • 1.2598 (2)
  • 1.26 (4)
  • 1.5 (3)
  • 1.5748 (3)
  • 1.8898 (1)
  • 1.9685 (12)
  • 2.4803 (11)
  • 3.1496 (2)
to
Back-End
System Size
  • PSC50 (56)
  • PSC63 (117)
  • PSC80 (6)
  • VDI40 (3)
  • VDI50 (7)
  • VDI60 (3)
Back-End Diameter
  • 1.9685 (199)
  • 2.48 (14)
  • 2.4803 (170)
to
Back-End Diameter
  • 50.0 (199)
  • 63.0 (184)
to
Hidden
Display Obsolete Products
  • true (582)
  • false (576)
Category Path
other
Platform
  • Beyond Evolution (16)
  • DUO-LOCK Adapter (12)
  • HydroForce (4)
  • PSC50 (257)
  • PSC63 (283)
  • PSC80 (6)
Tool Unit
  • I (62)
  • M (534)
Over All Length [L]
  • 50.0 (1)
  • 52.0 (22)
  • 54.0 (2)
  • 56.0 (2)
  • 60.0 (89)
  • 62.0 (4)
  • 65.0 (103)
  • 70.0 (15)
  • 75.0 (2)
  • 80.0 (10)
  • 80.03 (1)
  • 90.0 (33)
  • 100.0 (15)
  • 105.0 (8)
  • 109.7 (1)
  • 110.0 (22)
  • 120.0 (2)
  • 125.0 (6)
  • 140.0 (34)
  • 145.0 (1)
  • 150.0 (5)
  • 175.0 (5)
to
Over All Length [L]
  • 1.9685 (1)
  • 2.0472 (22)
  • 2.126 (2)
  • 2.2047 (2)
  • 2.3622 (89)
  • 2.4409 (4)
  • 2.559 (14)
  • 2.5591 (89)
  • 2.7559 (15)
  • 2.9528 (2)
  • 3.1496 (10)
  • 3.1508 (1)
  • 3.5433 (33)
  • 3.937 (15)
  • 4.1339 (8)
  • 4.3189 (1)
  • 4.3307 (22)
  • 4.7244 (2)
  • 4.9213 (6)
  • 5.5118 (34)
  • 5.7087 (1)
  • 5.9055 (5)
  • 6.8898 (5)
to
No filters matching ""
If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
You are about to create a duplicate . Do you want to proceed?
You are about to delete Do you want to proceed?
What would you like to rename your to?
Please enter a valid name
Please enter a name for the duplicate
Please enter a valid name
You are about to add to your My Solutions page. Do you want to proceed?
Please enter a valid name
Send a copy of

Please enter a valid Email
Please enter a valid name

We have found the following CAD Drawings

Select the files you are looking for and download them all at once

You should be logged to see your dashboard information
The product/s () you were trying to add to the cart is/are not available, please contact customer service.
item(s) successfully added to the cart
View Cart