Suggestions

Product Suggestions

Product Categories

Resources

Order Products Online
successfully added to cart
View Cart

Turning

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (16222)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (16186)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (16186)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (16186)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (16194)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (16194)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (16214)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (16214)
  • M Stainless Steel (12626)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (12626)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (12626)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (12626)
  • K Cast Iron (12756)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (12695)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (12640)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (12426)
  • N Non-Ferrous Materials (8926)
    • N1
      Wrought Aluminum
      (8363)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (8116)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2913)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (8912)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (8218)
    • N6
      Carbon, Graphite Composites, CFRP
      (7425)
    • N7
      MMC's
      (4407)
  • S High-Temp Alloys (12789)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (12744)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (12759)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (12759)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (11378)
  • H Hardened Materials (6713)
    • H1
      Hardened Materials 44-48 HRC
      (6713)
    • H2
      Hardened Materials 48-55 HRC
      (6265)
    • H3
      Hardened Materials 56-60 HRC
      (4450)
    • H4
      Hardened Materials >60 HRC
      (3480)
Select First Choice
  • CN (1416)
  • DE (1407)
  • GB (296)
  • IN (175)
  • US (1560)
Applications
  • Back Boring Back Boring (4549)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (577)
  • Blind Hole Finishing Blind Hole Finishing (577)
  • Boring Boring (2563)
  • CRT Boring CRT Boring (575)
  • CRT Profiling CRT Profiling (571)
  • Chamfer Milling Chamfer Milling (364)
  • Chamfer Turning Chamfer Turning (2616)
  • Convex Drilling Convex Drilling (1)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (1)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (1)
  • Counterboring Counterboring (1)
  • Countersinking Countersinking (1)
  • Cut-Off Cut-Off (4936)
  • Deep Grooving Deep Grooving (1643)
  • Drilling Drilling (548)
  • Face Grooving Face Grooving (4777)
  • Face Milling Face Milling (547)
  • Facing Facing (6113)
  • Grooving Grooving (5039)
  • ID Facing ID Facing (4790)
  • ID Grooving ID Grooving (4835)
  • ID Thread Turning ID Thread Turning (22475)
  • Inclined Entry Drilling Inclined Entry Drilling (1)
  • Inclined Exit Drilling Inclined Exit Drilling (1)
  • Multiple Direction Cutting Multiple Direction Cutting (5635)
  • OD Thread Turning OD Thread Turning (3785)
  • Plunge Turning Plunge Turning (5660)
  • Pre-Condition Pre-Condition (1)
  • Profiling Profiling (7358)
  • Shoulder Milling Shoulder Milling (364)
  • Stacked Plates Drilling Stacked Plates Drilling (1)
  • TRN Boring TRN Boring (2787)
  • Threading Threading (964)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (577)
  • Through Hole Finishing Through Hole Finishing (577)
  • Turning Turning (6596)
  • X-Offset Drilling X-Offset Drilling (1)
Type of Thread
  • 55 (6)
  • 60 (269)
  • ACME (191)
  • API (171)
  • API RD (136)
  • BSPT (4)
  • BSW (120)
  • BUTTRESS (241)
  • M (159)
  • NPT (120)
  • NPTF (4)
  • RD DIN 405 (6)
  • STUB ACME (120)
  • TR DIN 103 (6)
  • UN (245)
  • UNJ (118)
Cutting Condition
  • Heavily Interrupted Cut (9090)
  • Interrupted (1944)
  • Lightly Interrupted Cut (10296)
  • Smooth Cut (14278)
  • Varying Depth of Cut (10810)
Tool Cutting Edge Angle
  • 45.0 (368)
  • 48.0 (9)
  • 49.783 (2)
  • 50.0 (29)
  • 60.0 (54)
  • 62.5 (61)
  • 63.0 (30)
  • 72.5 (34)
  • 75.0 (622)
  • 85.0 (24)
  • 89.0 (2)
  • 90.0 (2719)
  • 91.0 (3)
  • 92.0 (5)
  • 92.25 (32)
  • 93.0 (934)
  • 95.0 (1432)
  • 97.0 (10)
  • 97.5 (4)
  • 100.0 (1)
  • 105.0 (4)
  • 107.5 (171)
  • 117.5 (23)
  • 140.0 (4)
to
Cutting Edges Per Insert
  • 0.0 (141)
  • 1.0 (5506)
  • 2.0 (10845)
  • 3.0 (2826)
  • 4.0 (7398)
  • 6.0 (3028)
  • 8.0 (4797)
  • 16.0 (2)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.0 (1)
  • 0.026 (59)
  • 0.03 (161)
  • 0.038 (515)
  • 0.05 (142)
  • 0.051 (158)
  • 0.057 (56)
  • 0.066 (114)
  • 0.07 (4)
  • 0.076 (250)
  • 0.08 (206)
  • 0.081 (4)
  • 0.089 (307)
  • 0.09 (212)
  • 0.094 (114)
  • 0.097 (60)
  • 0.1 (2387)
  • 0.102 (1052)
  • 0.116 (58)
  • 0.117 (56)
  • 0.127 (120)
  • 0.13 (140)
  • 0.131 (114)
  • 0.132 (114)
  • 0.133 (114)
  • 0.15 (179)
  • 0.152 (4)
  • 0.155 (90)
  • 0.157 (114)
  • 0.16 (54)
  • 0.165 (168)
  • 0.173 (114)
  • 0.177 (40)
  • 0.178 (212)
  • 0.18 (205)
  • 0.185 (103)
  • 0.19 (589)
  • 0.191 (1287)
  • 0.198 (114)
  • 0.2 (4362)
  • 0.202 (153)
  • 0.203 (1816)
  • 0.21 (4)
  • 0.224 (114)
  • 0.235 (114)
  • 0.244 (58)
  • 0.25 (122)
  • 0.251 (114)
  • 0.254 (168)
  • 0.255 (59)
  • 0.269 (114)
  • 0.282 (114)
  • 0.284 (114)
  • 0.3 (512)
  • 0.305 (2)
  • 0.315 (233)
  • 0.318 (282)
  • 0.33 (114)
  • 0.34 (290)
  • 0.343 (165)
  • 0.356 (114)
  • 0.38 (158)
  • 0.381 (108)
  • 0.394 (48)
  • 0.396 (100)
  • 0.397 (3205)
  • 0.4 (8135)
  • 0.404 (114)
  • 0.406 (698)
  • 0.41 (105)
  • 0.43 (114)
  • 0.432 (2)
  • 0.445 (168)
  • 0.472 (58)
  • 0.49 (114)
  • 0.5 (356)
  • 0.508 (126)
  • 0.52 (1)
  • 0.565 (35)
  • 0.57 (67)
  • 0.572 (546)
  • 0.575 (141)
  • 0.6 (139)
  • 0.65 (1)
  • 0.7 (4)
  • 0.703 (4)
  • 0.75 (82)
  • 0.787 (313)
  • 0.79 (429)
  • 0.791 (61)
  • 0.792 (566)
  • 0.794 (3516)
  • 0.795 (59)
  • 0.8 (10488)
  • 0.81 (105)
  • 0.826 (45)
  • 0.84 (67)
  • 0.902 (168)
  • 0.93 (2)
  • 0.99 (1)
  • 1.0 (544)
  • 1.06 (195)
  • 1.122 (32)
  • 1.18 (34)
  • 1.188 (206)
  • 1.19 (619)
  • 1.191 (2839)
  • 1.194 (261)
  • 1.195 (66)
  • 1.2 (6752)
  • 1.21 (25)
  • 1.25 (201)
  • 1.5 (535)
  • 1.525 (91)
  • 1.56 (231)
  • 1.58 (5)
  • 1.585 (130)
  • 1.587 (398)
  • 1.588 (2123)
  • 1.59 (345)
  • 1.6 (3878)
  • 1.65 (231)
  • 1.75 (201)
  • 1.98 (63)
  • 1.981 (140)
  • 1.984 (11)
  • 2.0 (452)
  • 2.025 (76)
  • 2.06 (178)
  • 2.25 (179)
  • 2.37 (183)
  • 2.375 (16)
  • 2.38 (419)
  • 2.381 (288)
  • 2.388 (237)
  • 2.39 (34)
  • 2.4 (1302)
  • 2.44 (187)
  • 2.5 (269)
  • 2.525 (61)
  • 2.56 (151)
  • 2.781 (4)
  • 3.0 (205)
  • 3.025 (63)
  • 3.06 (119)
  • 3.17 (118)
  • 3.175 (251)
  • 3.18 (223)
  • 3.2 (497)
  • 3.24 (136)
  • 3.96 (38)
  • 3.962 (2)
  • 3.969 (32)
  • 3.97 (35)
  • 4.0 (259)
  • 4.025 (38)
  • 4.03 (39)
  • 4.06 (39)
  • 4.76 (42)
  • 4.7625 (197)
  • 4.763 (56)
  • 5.0 (103)
  • 5.025 (32)
  • 6.0 (74)
  • 6.35 (350)
  • 7.912 (2)
  • 7.9375 (29)
  • 7.94 (3)
  • 8.0 (44)
  • 9.525 (71)
  • 10.0 (60)
  • 12.5 (37)
  • 12.7 (44)
  • 15.875 (2)
  • 16.0 (32)
  • 25.4 (2)
  • -4999.5 (5)
to
Corner Radius
  • 0.0 (1)
  • 0.001 (97)
  • 0.0011 (64)
  • 0.0015 (515)
  • 0.002 (207)
  • 0.0023 (56)
  • 0.0026 (114)
  • 0.0028 (4)
  • 0.003 (250)
  • 0.0031 (206)
  • 0.0032 (4)
  • 0.0035 (388)
  • 0.0037 (114)
  • 0.0038 (60)
  • 0.004 (2586)
  • 0.0046 (114)
  • 0.005 (370)
  • 0.0052 (114)
  • 0.0053 (114)
  • 0.0059 (122)
  • 0.006 (154)
  • 0.0062 (114)
  • 0.0065 (168)
  • 0.0068 (114)
  • 0.007 (291)
  • 0.0075 (1706)
  • 0.0078 (129)
  • 0.0079 (290)
  • 0.008 (4478)
  • 0.0083 (406)
  • 0.0088 (114)
  • 0.0093 (114)
  • 0.0096 (58)
  • 0.0099 (114)
  • 0.01 (178)
  • 0.0106 (114)
  • 0.0111 (114)
  • 0.0112 (114)
  • 0.0118 (170)
  • 0.012 (344)
  • 0.0124 (114)
  • 0.0125 (376)
  • 0.013 (288)
  • 0.0135 (221)
  • 0.014 (116)
  • 0.015 (317)
  • 0.0155 (48)
  • 0.0156 (7558)
  • 0.0157 (543)
  • 0.0158 (191)
  • 0.0159 (114)
  • 0.016 (3236)
  • 0.017 (116)
  • 0.0175 (168)
  • 0.0186 (58)
  • 0.0193 (114)
  • 0.0197 (352)
  • 0.02 (142)
  • 0.0225 (596)
  • 0.026 (1)
  • 0.0276 (4)
  • 0.0295 (82)
  • 0.031 (3189)
  • 0.0311 (61)
  • 0.0312 (2945)
  • 0.0313 (9901)
  • 0.0315 (542)
  • 0.032 (813)
  • 0.0325 (45)
  • 0.033 (67)
  • 0.0355 (168)
  • 0.0368 (2)
  • 0.039 (194)
  • 0.0394 (351)
  • 0.042 (195)
  • 0.046 (34)
  • 0.0468 (206)
  • 0.0469 (6898)
  • 0.047 (2680)
  • 0.0472 (124)
  • 0.048 (67)
  • 0.0487 (38)
  • 0.0492 (201)
  • 0.0516 (52)
  • 0.059 (308)
  • 0.0591 (297)
  • 0.06 (91)
  • 0.062 (319)
  • 0.0625 (4472)
  • 0.063 (1963)
  • 0.065 (231)
  • 0.0689 (201)
  • 0.078 (147)
  • 0.0781 (14)
  • 0.0785 (83)
  • 0.0787 (194)
  • 0.079 (238)
  • 0.0797 (76)
  • 0.081 (178)
  • 0.0886 (179)
  • 0.0928 (10)
  • 0.093 (183)
  • 0.0935 (16)
  • 0.0937 (1)
  • 0.0938 (1505)
  • 0.094 (844)
  • 0.096 (187)
  • 0.098 (199)
  • 0.0984 (114)
  • 0.0985 (48)
  • 0.0994 (61)
  • 0.101 (151)
  • 0.106 (56)
  • 0.1095 (4)
  • 0.115 (45)
  • 0.118 (169)
  • 0.1181 (88)
  • 0.1191 (63)
  • 0.121 (119)
  • 0.125 (671)
  • 0.126 (231)
  • 0.127 (132)
  • 0.128 (131)
  • 0.155 (24)
  • 0.156 (72)
  • 0.1563 (403)
  • 0.1565 (32)
  • 0.157 (47)
  • 0.1575 (216)
  • 0.158 (59)
  • 0.1585 (38)
  • 0.159 (34)
  • 0.16 (39)
  • 0.1875 (254)
  • 0.188 (25)
  • 0.196 (8)
  • 0.1969 (90)
  • 0.197 (46)
  • 0.1978 (32)
  • 0.236 (8)
  • 0.2362 (70)
  • 0.25 (350)
  • 0.3115 (2)
  • 0.312 (245)
  • 0.3125 (34)
  • 0.315 (44)
  • 0.375 (71)
  • 0.3935 (19)
  • 0.3937 (45)
  • 0.4688 (12)
  • 0.492 (12)
  • 0.4922 (26)
  • 0.5 (44)
  • 0.625 (2)
  • 0.6299 (22)
  • 0.63 (12)
  • 0.787 (111)
  • 1.0 (2)
  • -4999.5 (5)
to
Application
Minimum Feed
Minimum Feed
Drilling Condition
  • Heavily Interrupted Cut (3824)
  • Interrupted (23)
  • Lightly Interrupted Cut (4842)
  • Smooth Cut (8577)
  • Varying Depth of Cut (5237)
Grade Of Cutting Tool
  • 13E (1824)
  • 241 (399)
  • AC5 (160)
  • CG4 (103)
  • CG5 (24)
  • CG6 (3)
  • CL4 (1170)
  • CM1 (24)
  • CM2 (1747)
  • CM3 (1572)
  • CM4 (992)
  • CM5 (163)
  • CPX (1678)
  • CW2 (725)
  • CW2015 (451)
  • CW3020 (16)
  • CW5025 (510)
  • GH1 (97)
  • GH2 (10)
  • GX (1144)
  • HCK10 (28)
  • HK1500 (369)
  • HK35 (33)
  • HT2 (1230)
  • HTX (1127)
  • HWK10 (1)
  • HWK15 (30)
  • K00379 (93)
  • K060 (1119)
  • K090 (2376)
  • K1 (925)
  • K1010P (97)
  • K1025 (151)
  • K10M (2421)
  • K10P (2077)
  • K10U (1969)
  • K11 (77)
  • K15U (2082)
  • K20K (2438)
  • K21 (1340)
  • K25M (1881)
  • K25P (1916)
  • K2884 (35)
  • K2885 (352)
  • K313 (5695)
  • K35P (964)
  • K40 (18)
  • K420 (2462)
  • K45 (1448)
  • K4H (150)
  • K6 (218)
  • K68 (4102)
  • K8 (7)
  • K8735 (53)
  • KB1340 (757)
  • KB1345 (1298)
  • KB1610 (1984)
  • KB1625 (1399)
  • KB1630 (1803)
  • KB5610 (1639)
  • KB5625 (2179)
  • KB5630 (1270)
  • KB9610 (2300)
  • KB9640 (983)
  • KBH10 (1941)
  • KBH10B (1072)
  • KBH20 (2100)
  • KBH20B (1077)
  • KBK35 (452)
  • KBK45 (65)
  • KC210 (1535)
  • KC250 (2004)
  • KC5010 (5693)
  • KC5020P (295)
  • KC5025 (5124)
  • KC5115RR (3)
  • KC5125RR (9)
  • KC514M (3)
  • KC522M (3)
  • KC525M (2)
  • KC5410 (3538)
  • KC5510 (2205)
  • KC5525 (1220)
  • KC710 (1199)
  • KC715M (7)
  • KC720 (3346)
  • KC722 (644)
  • KC725M (41)
  • KC730 (4655)
  • KC7310 (2744)
  • KC732 (3209)
  • KC735M (47)
  • KC740 (63)
  • KC792M (8)
  • KC8050 (4311)
  • KC810 (4284)
  • KC850 (4778)
  • KC9010 (3086)
  • KC9025 (4154)
  • KC910 (4014)
  • KC9105 (3232)
  • KC9110 (5201)
  • KC9110RR (8)
  • KC9115RR (3)
  • KC9120 (3465)
  • KC9125 (4471)
  • KC9125RR (249)
  • KC9140 (2551)
  • KC9145 (1884)
  • KC915M (3)
  • KC920M (11)
  • KC9210 (168)
  • KC9215 (2259)
  • KC9225 (3825)
  • KC9240 (3594)
  • KC9240NEW (3548)
  • KC9245 (2259)
  • KC925M (16)
  • KC9315 (4036)
  • KC9320 (3583)
  • KC9325 (3076)
  • KC935 (4525)
  • KC935M (1)
  • KC950 (3867)
  • KC990 (3579)
  • KCD25 (1316)
  • KCK05 (3450)
  • KCK05B (2541)
  • KCK15 (3125)
  • KCK15B (3452)
  • KCK20 (4035)
  • KCK20B (4608)
  • KCM15 (3454)
  • KCM15B (2967)
  • KCM25 (3754)
  • KCM25B (3282)
  • KCM35 (2797)
  • KCM35B (2561)
  • KCP05 (3188)
  • KCP05B (1750)
  • KCP10 (4533)
  • KCP10B (5085)
  • KCP15 (58)
  • KCP25 (4698)
  • KCP25B (5391)
  • KCP30 (3482)
  • KCP30B (2160)
  • KCP40 (2169)
  • KCP40B (2156)
  • KCPK05 (2104)
  • KCPK30 (8)
  • KCS10 (1752)
  • KCS10B (3112)
  • KCSM30 (3)
  • KCU10 (6655)
  • KCU25 (6177)
  • KD050 (2077)
  • KD081 (1915)
  • KD100 (1809)
  • KD105 (214)
  • KD120 (2038)
  • KD1400 (2055)
  • KD1405 (1421)
  • KD1425 (2458)
  • KD200 (29)
  • KD230 (37)
  • KD240 (35)
  • KM1 (1197)
  • KMF (499)
  • KMS (129)
  • KT1120 (376)
  • KT125 (2028)
  • KT150 (1670)
  • KT175 (2679)
  • KT195M (7)
  • KT315 (4054)
  • KT325 (1405)
  • KT5020 (152)
  • KTP10 (1194)
  • KU10 (1168)
  • KU10T (3106)
  • KU25T (263)
  • KU30T (3920)
  • KY1310 (1634)
  • KY1320 (2064)
  • KY1335 (5)
  • KY1525 (129)
  • KY1540 (1348)
  • KY1615 (2352)
  • KY2000 (1543)
  • KY2100 (938)
  • KY2200 (14)
  • KY3000 (2302)
  • KY3400 (1909)
  • KY3500 (2593)
  • KY4000 (1010)
  • KY4300 (1196)
  • KY4400 (2162)
  • KYHK15B (41)
  • KYHS10 (3)
  • KYK10 (1359)
  • KYK25 (1778)
  • KYK35 (2228)
  • KYS25 (1135)
  • KYS30 (1402)
  • KYSM10 (3)
  • KYSP30 (5)
  • MC2 (219)
  • MC3 (23)
  • NL200 (566)
  • NL250 (2074)
  • NL300 (1589)
  • NL400 (837)
  • NL920 (1454)
  • P10 (104)
  • P20 (63)
  • P25 (893)
  • P2F (154)
  • PB100 (131)
  • PB170 (126)
  • PB250 (141)
  • PB300 (107)
  • PD100 (27)
  • PD50 (25)
  • PS5 (667)
  • SF30 (47)
  • SP0819 (1397)
  • SP0A00 (118)
  • SP0G00 (3)
  • SP0NTA (1)
  • SP0PW3 (10)
  • SP3019 (1380)
  • SP4019 (1122)
  • SP4036 (129)
  • SP4093 (129)
  • SP4200 (62)
  • SP61EJ (227)
  • SP7779 (10)
  • SP88F8 (54)
  • SPADAP (232)
  • SPB400 (35)
  • SPM5F2 (122)
  • SPMQMA (64)
  • SPN3W1 (2)
  • SPN4W2 (24)
  • SPSREJ (75)
  • THM (355)
  • THM-X (190)
  • THMF-X (182)
  • TN10P (572)
  • TN10U (477)
  • TN15M (561)
  • TN15U (458)
  • TN2000 (407)
  • TN20K (593)
  • TN20P (624)
  • TN30M (587)
  • TN30P (500)
  • TN4000 (384)
  • TN5015 (490)
  • TN5020 (472)
  • TN5105 (463)
  • TN5120 (554)
  • TN6010 (328)
  • TN6025 (274)
  • TN7005 (361)
  • TN7010 (587)
  • TN7015 (603)
  • TN7025 (599)
  • TN7035 (611)
  • TN7105 (332)
  • TN7110 (455)
  • TN7115 (571)
  • TN7125 (516)
  • TN7135 (475)
  • TN8025 (562)
  • TTI15 (232)
  • TTM (2)
  • TTM09 (144)
  • TTR (229)
  • TTR-X (24)
  • TTS (298)
  • TTX (340)
  • W00160 (1)
  • W00162 (15)
  • W00342 (57)
  • WBH10C (330)
  • WBH10P (280)
  • WBH10U (355)
  • WBH25P (319)
  • WBH25U (359)
  • WBH30P (280)
  • WBK40U (197)
  • WBK45U (313)
  • WDN00U (249)
  • WDN25U (384)
  • WK05CT (610)
  • WK15CT (371)
  • WK20CT (681)
  • WM15CT (661)
  • WM25CT (662)
  • WM35CT (562)
  • WP05CT (152)
  • WP15CT (684)
  • WP20TT (47)
  • WP25CT (710)
  • WP35CT (633)
  • WS10PT (580)
  • WS25PT (593)
  • WU10HT (538)
  • X00511 (398)
  • YY3A00 (41)
  • YY87EL (62)
  • YYMITA (14)
Wiper Insert
  • N (27820)
  • Y (2135)
Minimum Axial Groove Diameter
  • 0.0 (168)
  • 0.18 (10)
  • 0.2039 (1)
  • 0.204 (13)
  • 0.2079 (1)
  • 0.208