Product Suggestions

Product Family suggestions

successfully added to cart
View Cart

Notifications

Mark all as read

Utensili per lamatura

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (88)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (88)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (88)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (88)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (88)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (88)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (88)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (88)
  • M Stainless Steel (88)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (88)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (88)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (88)
  • K Cast Iron (110)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (110)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (110)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (110)
  • N Non-Ferrous Materials (60)
    • N1
      Wrought Aluminum
      (60)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (60)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (60)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (60)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (60)
    • N6
      Carbon, Graphite Composites, CFRP
      (60)
    • N7
      MMC's
      (60)
  • S High-Temp Alloys (87)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (87)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (87)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (87)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (87)
  • H Hardened Materials (51)
    • H1
      Hardened Materials 44-48 HRC
      (51)
    • H2
      Hardened Materials 48-55 HRC
      (51)
    • H3
      Hardened Materials 56-60 HRC
      (51)
    • H4
      Hardened Materials >60 HRC
      (51)
Applications
Applications
  • Counterboring Counterboring (35)
  • Drilling Drilling (35)
  • ID Thread Turning ID Thread Turning (1)
Cutting Diameter
Cutting Diameter
  • 0.595 in (1)
  • 0.635 in (1)
  • 0.674 in (1)
  • 0.714 in (2)
  • 0.794 in (2)
  • 0.812 in (1)
  • 0.834 in (2)
  • 0.873 in (2)
  • 0.912 in (2)
  • 0.953 in (2)
  • 0.991 in (2)
  • 1.0 in (1)
  • 1.031 in (1)
  • 1.07 in (1)
  • 1.109 in (1)
  • 1.187 in (1)
  • 1.188 in (1)
  • 1.268 in (1)
  • 1.307 in (1)
  • 1.346 in (1)
  • 1.387 in (1)
  • 1.425 in (1)
  • 1.504 in (1)
  • 1.583 in (1)
  • 1.625 in (1)
  • 1.661 in (1)
  • 1.819 in (1)
  • 2.0 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 15.125 mm (1)
  • 16.125 mm (1)
  • 17.125 mm (1)
  • 18.125 mm (2)
  • 20.175 mm (2)
  • 20.625 mm (1)
  • 21.175 mm (2)
  • 22.175 mm (2)
  • 23.175 mm (2)
  • 24.175 mm (2)
  • 25.175 mm (2)
  • 25.401 mm (1)
  • 26.175 mm (1)
  • 27.175 mm (1)
  • 28.175 mm (1)
  • 30.151 mm (1)
  • 30.175 mm (1)
  • 32.2 mm (1)
  • 33.2 mm (1)
  • 34.2 mm (1)
  • 35.2 mm (1)
  • 36.2 mm (1)
  • 38.2 mm (1)
  • 40.2 mm (1)
  • 41.276 mm (1)
  • 42.2 mm (1)
  • 46.2 mm (1)
  • 50.801 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Interrupted (10)
  • Stable (59)
  • Unstable (22)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 8.5 mm (2)
  • 11.0 mm (1)
  • 12.701 mm (1)
  • 13.5 mm (3)
  • 15.875 mm (1)
  • 16.0 mm (7)
  • 18.5 mm (1)
  • 19.05 mm (1)
  • 21.0 mm (3)
  • 23.0 mm (2)
  • 23.5 mm (3)
  • 25.401 mm (1)
  • 25.5 mm (3)
  • 27.5 mm (1)
  • 30.0 mm (1)
  • 30.5 mm (1)
  • 31.75 mm (1)
  • 33.5 mm (2)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.335 in (2)
  • 0.433 in (1)
  • 0.5 in (1)
  • 0.531 in (3)
  • 0.625 in (1)
  • 0.63 in (7)
  • 0.728 in (1)
  • 0.75 in (1)
  • 0.828 in (3)
  • 0.906 in (2)
  • 0.925 in (3)
  • 1.0 in (1)
  • 1.004 in (3)
  • 1.083 in (1)
  • 1.181 in (1)
  • 1.201 in (1)
  • 1.25 in (1)
  • 1.319 in (2)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Connection Style
Connection Style
  • Weldon (5)
  • Whistle Notch 2 (30)
Number of Flutes
Number of Flutes
  • 2 (12)
  • 3 (23)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 2.0 (111)
  • 4.0 (21)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.008 in (3)
  • 0.016 in (34)
  • 0.024 in (4)
  • 0.031 in (15)
  • 0.039 in (6)
  • 0.047 in (6)
  • 0.063 in (5)
  • 0.079 in (3)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (3)
  • 0.4 mm (34)
  • 0.601 mm (4)
  • 0.8 mm (15)
  • 1.0 mm (6)
  • 1.201 mm (6)
  • 1.6 mm (5)
  • 2.0 mm (3)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (76)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (76)
Corner Chamfer Min to Corner Chamfer Max
application
Drilling Condition
Drilling Condition
  • Interrupted (45)
  • Smooth Cut (6)
  • Stable (94)
  • Unstable (57)
  • Varying Depth of Cut (6)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CD4 (35)
  • CM4 (35)
  • CS5 (36)
  • KC7140 (39)
  • KC720 (7)
  • KC7210 (35)
  • KC7215 (67)
  • KC7815 (7)
  • KCPK10 (41)
  • KCS10B (6)
  • KCU25 (48)
  • KCU40 (49)
  • KM1 (41)
Hand Of Tool
Hand Of Tool
  • R (35)
Wiper Insert
Wiper Insert
  • N (76)
Drill Type
Drill Type
  • 86-04 (35)
insertGeometry
Shape
Shape
  • S-SQUARE 90 (76)
Insert IC Size
Insert IC Size
  • 6.351 mm (13)
  • 7.926 mm (16)
  • 9.525 mm (20)
  • 12.701 mm (18)
  • 15.875 mm (9)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.25 in (13)
  • 0.312 in (16)
  • 0.375 in (20)
  • 0.5 in (18)
  • 0.625 in (9)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 6.351 mm (13)
  • 7.926 mm (16)
  • 9.525 mm (20)
  • 12.701 mm (27)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.25 in (13)
  • 0.312 in (16)
  • 0.375 in (20)
  • 0.5 in (27)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • 20 (33)
  • 21 (30)
  • 22 (4)
Cutting Tool Material
Cutting Tool Material
  • H W (76)
Tolerance Class
Tolerance Class
  • H (12)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (35)
Back-End Diameter
Back-End Diameter
  • 19.05 mm (2)
  • 20.0 mm (23)
  • 25.401 mm (2)
  • 31.75 mm (1)
  • 32.0 mm (7)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.75 in (2)
  • 0.787 in (23)
  • 1.0 in (2)
  • 1.25 in (1)
  • 1.26 in (7)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""

Supporto

Chatta con un esperto 
Ora disponibile
Dal lunedì al venerdì dalle 8:00 alle 18:00 ET

Assistenza globale

Acquista

Acquista prodotti Kennametal

Trovaci su Ariba

Carriere

Lavora per Kennametal

✉ Rimani in contatto

Iscriviti alla nostra mailing list

⤓ App NOVO

Trova alternative per utensili obsoleti

Scarica ora

© 2022 Terms & Conditions of Use | Conditions of Sale | Data Privacy Policy

Kennametal Inc. 525 William Penn Place Suite 3300, Pittsburgh, PA 15219

product-image
Please adjust the following properties from

ISO Catalogo

ANSI Catalogo

to find similar products.
You are about to create a duplicate . Do you want to proceed?
You are about to delete Do you want to proceed?
What would you like to rename your to?
Please enter a valid name
Please enter a name for the duplicate
Please enter a valid name
You are about to add to your My Solutions page. Do you want to proceed?
Please enter a valid name
Send a copy of

Please enter a valid Email
Please enter a valid name

The following CAD files are available

Please select a file to download

Can’t find the file type you’re looking for?
Request Drawings »

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service.
item(s) successfully added to the cart
View Cart