successfully added to cart
View Cart

Notifications

Mark all as read

Profilatura

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1440)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1440)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1440)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1440)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1440)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1440)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1440)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1440)
  • M Stainless Steel (1349)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1349)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1349)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1349)
  • K Cast Iron (1419)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1419)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1415)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1410)
  • N Non-Ferrous Materials (1442)
    • N1
      Wrought Aluminum
      (1428)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1342)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (449)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1442)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1356)
    • N6
      Carbon, Graphite Composites, CFRP
      (1342)
    • N7
      MMC's
      (348)
  • S High-Temp Alloys (1430)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1430)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1430)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1430)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1424)
  • H Hardened Materials (1132)
    • H1
      Hardened Materials 44-48 HRC
      (1132)
    • H2
      Hardened Materials 48-55 HRC
      (1016)
    • H3
      Hardened Materials 56-60 HRC
      (306)
    • H4
      Hardened Materials >60 HRC
      (306)
Select First Choice
  • BR (23)
  • CN (190)
  • DE (190)
  • GB (108)
  • IN (33)
  • SG (67)
  • US (278)
Applications
Applications
  • Back Boring Back Boring (44)
  • Boring Boring (98)
  • CRT Profiling CRT Profiling (20)
  • Cut-Off Cut-Off (239)
  • Deep Grooving Deep Grooving (54)
  • Face Grooving Face Grooving (895)
  • Facing Facing (67)
  • Grooving Grooving (1071)
  • ID Facing ID Facing (69)
  • ID Grooving ID Grooving (572)
  • ID Thread Turning ID Thread Turning (87)
  • Multiple Direction Cutting Multiple Direction Cutting (499)
  • OD Thread Turning OD Thread Turning (127)
  • Plunge Turning Plunge Turning (460)
  • Profiling Profiling (306)
  • TRN Boring TRN Boring (50)
  • Threading Threading (130)
  • Turning Turning (236)
Type of Thread
Type of Thread
  • 60 (188)
  • ACME (123)
  • API (115)
  • API RD (87)
  • BSW (79)
  • BUTTRESS (183)
  • M (115)
  • NPT (79)
  • STUB ACME (79)
  • UN (183)
  • UNJ (79)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (1002)
  • Lightly Interrupted Cut (1114)
  • Smooth Cut (1232)
  • Varying Depth of Cut (1193)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (12)
  • 60.0 (4)
  • 62.5 (2)
  • 72.5 (2)
  • 90.0 (749)
  • 92.25 (27)
  • 93.0 (1)
  • 95.0 (77)
  • 100.0 (1)
  • 107.5 (9)
  • 117.5 (8)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Bolt-On Head (9)
  • Boring Bar Shank (212)
  • Toolholder (468)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (741)
  • 2.0 (1123)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (79)
  • 0.003 in (188)
  • 0.004 in (147)
  • 0.005 in (155)
  • 0.006 in (115)
  • 0.007 in (151)
  • 0.008 in (652)
  • 0.01 in (151)
  • 0.011 in (79)
  • 0.012 in (143)
  • 0.014 in (118)
  • 0.016 in (665)
  • 0.017 in (79)
  • 0.019 in (115)
  • 0.02 in (234)
  • 0.023 in (118)
  • 0.03 in (70)
  • 0.031 in (662)
  • 0.033 in (11)
  • 0.034 in (50)
  • 0.035 in (115)
  • 0.039 in (351)
  • 0.041 in (118)
  • 0.046 in (18)
  • 0.047 in (373)
  • 0.048 in (14)
  • 0.049 in (148)
  • 0.06 in (287)
  • 0.061 in (47)
  • 0.062 in (93)
  • 0.063 in (400)
  • 0.065 in (45)
  • 0.069 in (148)
  • 0.078 in (94)
  • 0.079 in (219)
  • 0.08 in (57)
  • 0.081 in (49)
  • 0.089 in (115)
  • 0.094 in (123)
  • 0.095 in (160)
  • 0.096 in (48)
  • 0.098 in (122)
  • 0.099 in (46)
  • 0.1 in (41)
  • 0.119 in (80)
  • 0.12 in (84)
  • 0.125 in (181)
  • 0.128 in (37)
  • 0.156 in (40)
  • 0.157 in (40)
  • 0.158 in (44)
  • 0.159 in (27)
  • 0.187 in (8)
  • 0.188 in (33)
  • 0.197 in (10)
  • 0.198 in (12)
  • 0.25 in (13)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (79)
  • 0.076 mm (188)
  • 0.1 mm (147)
  • 0.125 mm (155)
  • 0.151 mm (115)
  • 0.176 mm (151)
  • 0.2 mm (652)
  • 0.225 mm (79)
  • 0.25 mm (151)
  • 0.275 mm (79)
  • 0.301 mm (143)
  • 0.325 mm (118)
  • 0.351 mm (115)
  • 0.4 mm (665)
  • 0.426 mm (79)
  • 0.45 mm (115)
  • 0.476 mm (40)
  • 0.5 mm (234)
  • 0.576 mm (118)
  • 0.75 mm (70)
  • 0.775 mm (210)
  • 0.8 mm (452)
  • 0.826 mm (11)
  • 0.851 mm (50)
  • 0.9 mm (115)
  • 1.0 mm (351)
  • 1.05 mm (118)
  • 1.175 mm (18)
  • 1.201 mm (373)
  • 1.225 mm (14)
  • 1.25 mm (148)
  • 1.5 mm (279)
  • 1.526 mm (71)
  • 1.55 mm (47)
  • 1.576 mm (93)
  • 1.6 mm (400)
  • 1.651 mm (45)
  • 1.75 mm (148)
  • 1.975 mm (94)
  • 2.0 mm (219)
  • 2.025 mm (57)
  • 2.051 mm (49)
  • 2.25 mm (115)
  • 2.375 mm (123)
  • 2.401 mm (160)
  • 2.45 mm (48)
  • 2.5 mm (122)
  • 2.526 mm (46)
  • 2.551 mm (41)
  • 3.0 mm (80)
  • 3.026 mm (43)
  • 3.051 mm (41)
  • 3.176 mm (181)
  • 3.25 mm (37)
  • 3.95 mm (25)
  • 3.975 mm (15)
  • 4.0 mm (40)
  • 4.025 mm (44)
  • 4.05 mm (27)
  • 4.75 mm (8)
  • 4.775 mm (33)
  • 5.0 mm (10)
  • 5.025 mm (12)
  • 6.351 mm (13)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (1013)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (1013)
Corner Chamfer Min to Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (272)
  • Lightly Interrupted Cut (332)
  • Smooth Cut (450)
  • Varying Depth of Cut (411)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K00326 (29)
  • K1 (5)
  • K1025 (100)
  • K2885 (147)
  • K313 (865)
  • K420 (263)
  • K4H (111)
  • K6 (4)
  • K68 (342)
  • K8735 (29)
  • KB1345 (140)
  • KB1630 (306)
  • KB5625 (266)
  • KBH20 (227)
  • KC250 (234)
  • KC5010 (716)
  • KC5025 (668)
  • KC5410 (329)
  • KC5510 (20)
  • KC710 (183)
  • KC720 (217)
  • KC722 (183)
  • KC730 (415)
  • KC7310 (139)
  • KC732 (225)
  • KC8050 (152)
  • KC810 (299)
  • KC850 (354)
  • KC9025 (94)
  • KC910 (252)
  • KC9105 (62)
  • KC9110 (561)
  • KC9120 (113)
  • KC9125 (366)
  • KC9225 (152)
  • KC9315 (89)
  • KC9320 (183)
  • KC935 (329)
  • KC950 (277)
  • KCD25 (29)
  • KCK05 (37)
  • KCK15B (31)
  • KCK20 (358)
  • KCK20B (426)
  • KCM15B (59)
  • KCM25 (100)
  • KCM25B (5)
  • KCM35B (162)
  • KCP05 (93)
  • KCP10 (376)
  • KCP10B (498)
  • KCP25 (377)
  • KCP25B (548)
  • KCS10 (56)
  • KCS10B (89)
  • KCU10 (1025)
  • KCU25 (980)
  • KD050 (122)
  • KD081 (108)
  • KD100 (192)
  • KD120 (201)
  • KD1405 (152)
  • KD1425 (180)
  • KMS (101)
  • KS15 (29)
  • KT125 (82)
  • KT150 (87)
  • KT175 (200)
  • KT315 (576)
  • KU10 (264)
  • KU10T (183)
  • KU25T (183)
  • KU30T (370)
  • KY3000 (115)
  • KY3500 (214)
  • KYS30 (90)
  • SP88F8 (36)
Hand Of Tool
Hand Of Tool
  • L (300)
  • N (13)
  • R (376)
Wiper Insert
Wiper Insert
  • N (1565)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (88)
  • 11.175 mm (2)
  • 11.5 mm (2)
  • 15.875 mm (4)
  • 16.0 mm (12)
  • 16.776 mm (2)
  • 17.0 mm (3)
  • 17.026 mm (2)
  • 18.5 mm (2)
  • 18.55 mm (4)
  • 19.05 mm (1)
  • 20.0 mm (21)
  • 20.326 mm (1)
  • 21.0 mm (3)
  • 22.0 mm (3)
  • 22.85 mm (4)
  • 24.901 mm (6)
  • 25.0 mm (33)
  • 25.401 mm (6)
  • 26.0 mm (7)
  • 26.925 mm (1)
  • 28.576 mm (4)
  • 31.75 mm (6)
  • 32.0 mm (20)
  • 33.025 mm (5)
  • 34.0 mm (4)
  • 34.926 mm (6)
  • 36.0 mm (5)
  • 38.0 mm (1)
  • 38.1 mm (8)
  • 40.0 mm (14)
  • 41.301 mm (39)
  • 42.0 mm (5)
  • 44.0 mm (6)
  • 44.45 mm (2)
  • 45.051 mm (1)
  • 46.475 mm (1)
  • 47.6 mm (39)
  • 48.0 mm (3)
  • 50.0 mm (6)
  • 50.801 mm (4)
  • 52.0 mm (14)
  • 53.85 mm (1)
  • 54.0 mm (4)
  • 55.875 mm (3)
  • 56.625 mm (29)
  • 57.151 mm (6)
  • 57.2 mm (15)
  • 58.0 mm (4)
  • 60.0 mm (4)
  • 60.325 mm (4)
  • 63.0 mm (1)
  • 63.5 mm (23)
  • 64.0 mm (4)
  • 65.0 mm (1)
  • 68.0 mm (4)
  • 69.851 mm (4)
  • 70.0 mm (8)
  • 76.2 mm (8)
  • 80.0 mm (7)
  • 82.551 mm (4)
  • 88.9 mm (117)
  • 90.0 mm (8)
  • 92.0 mm (3)
  • 100.0 mm (3)
  • 120.0 mm (12)
  • 127.0 mm (1)
  • 130.0 mm (4)
  • 132.0 mm (4)
  • 139.701 mm (220)
  • 146.05 mm (3)
  • 174.601 mm (39)
  • 184.0 mm (3)
  • 200.0 mm (8)
  • 209.601 mm (97)
  • 222.3 mm (15)
  • 250.0 mm (6)
  • 290.0 mm (7)
  • 333.0 mm (3)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (88)
  • 0.44 in (2)
  • 0.453 in (2)
  • 0.625 in (4)
  • 0.63 in (12)
  • 0.66 in (2)
  • 0.669 in (3)
  • 0.67 in (2)
  • 0.728 in (2)
  • 0.73 in (4)
  • 0.75 in (1)
  • 0.787 in (21)
  • 0.8 in (1)
  • 0.828 in (3)
  • 0.866 in (3)
  • 0.9 in (4)
  • 0.98 in (6)
  • 0.984 in (33)
  • 1.0 in (6)
  • 1.024 in (7)
  • 1.06 in (1)
  • 1.125 in (4)
  • 1.25 in (6)
  • 1.26 in (20)
  • 1.3 in (5)
  • 1.339 in (4)
  • 1.375 in (6)
  • 1.417 in (5)
  • 1.496 in (1)
  • 1.5 in (8)
  • 1.575 in (14)
  • 1.627 in (39)
  • 1.655 in (5)
  • 1.732 in (6)
  • 1.75 in (2)
  • 1.774 in (1)
  • 1.83 in (1)
  • 1.874 in (39)
  • 1.891 in (3)
  • 1.969 in (6)
  • 2.0 in (4)
  • 2.047 in (14)
  • 2.12 in (1)
  • 2.126 in (4)
  • 2.2 in (3)
  • 2.229 in (29)
  • 2.25 in (6)
  • 2.253 in (15)
  • 2.283 in (4)
  • 2.362 in (4)
  • 2.375 in (4)
  • 2.48 in (1)
  • 2.5 in (23)
  • 2.52 in (4)
  • 2.559 in (1)
  • 2.677 in (4)
  • 2.75 in (4)
  • 2.757 in (8)
  • 3.0 in (8)
  • 3.15 in (7)
  • 3.25 in (4)
  • 3.5 in (117)
  • 3.543 in (8)
  • 3.622 in (3)
  • 3.938 in (3)
  • 4.724 in (12)
  • 5.0 in (1)
  • 5.118 in (4)
  • 5.197 in (4)
  • 5.5 in (220)
  • 5.75 in (3)
  • 6.875 in (39)
  • 7.244 in (3)
  • 7.875 in (8)
  • 8.252 in (97)
  • 8.752 in (15)
  • 9.843 in (6)
  • 11.417 in (7)
  • 13.11 in (3)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 0.787 in (4)
  • 0.828 in (3)
  • 0.906 in (1)
  • 0.984 in (6)
  • 1.024 in (2)
  • 1.063 in (9)
  • 1.102 in (7)
  • 1.339 in (7)
  • 1.379 in (2)
  • 1.417 in (13)
  • 1.811 in (1)
  • 1.891 in (4)
  • 2.126 in (2)
  • 2.283 in (4)
  • 2.52 in (3)
  • 2.835 in (3)
  • 2.914 in (3)
  • 3.307 in (4)
  • 3.701 in (4)
  • 3.938 in (8)
  • 4.409 in (4)
  • 4.882 in (3)
  • 5.354 in (4)
  • 5.906 in (3)
  • 6.299 in (4)
  • 7.875 in (2)
  • 8.346 in (3)
  • 10.0 in (4)
  • 11.811 in (12)
  • 39.331 in (11)
  • 393.661 in (502)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 20.0 mm (4)
  • 21.0 mm (3)
  • 23.0 mm (1)
  • 25.0 mm (6)
  • 26.0 mm (2)
  • 27.0 mm (9)
  • 28.0 mm (7)
  • 34.0 mm (7)
  • 35.0 mm (2)
  • 36.0 mm (13)
  • 46.0 mm (1)
  • 48.0 mm (4)
  • 54.0 mm (2)
  • 58.0 mm (4)
  • 64.0 mm (3)
  • 72.0 mm (3)
  • 74.0 mm (3)
  • 84.0 mm (4)
  • 94.0 mm (4)
  • 100.0 mm (8)
  • 112.0 mm (4)
  • 124.0 mm (3)
  • 136.0 mm (4)
  • 150.0 mm (3)
  • 160.0 mm (4)
  • 200.0 mm (2)
  • 212.0 mm (3)
  • 254.0 mm (4)
  • 300.0 mm (12)
  • 999.0 mm (11)
  • 9999.0 mm (502)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Countersunk Angle
Countersunk Angle
  • 17.5 (1)
Countersunk Angle Min to Countersunk Angle Max
Cutting Direction
Cutting Direction
  • B (73)
  • E (442)
  • P (4)
  • S (170)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (7)
  • DOUBLE POSITIVE (5)
  • NEGATIVE-ZERO (90)
  • NEUTRAL (ZERO) (315)
  • POSITIVE-ZERO (117)
Maximum Bore Depth
Maximum Bore Depth
  • 0.946 in (4)
  • 1.0 in (14)
  • 1.23 in (1)
  • 1.232 in (1)
  • 1.25 in (6)
  • 1.26 in (4)
  • 1.291 in (1)
  • 1.5 in (7)
  • 1.575 in (15)
  • 1.586 in (2)
  • 1.587 in (2)
  • 1.891 in (4)
  • 1.969 in (9)
  • 1.98 in (8)
  • 2.0 in (34)
  • 2.496 in (2)
  • 2.499 in (1)
  • 2.5 in (6)
  • 2.511 in (1)
  • 2.52 in (19)
  • 2.835 in (2)
  • 3.0 in (13)
  • 3.15 in (17)
  • 3.75 in (4)
  • 3.781 in (2)
  • 3.938 in (11)
  • 4.0 in (13)
  • 4.5 in (4)
  • 4.992 in (1)
  • 5.0 in (4)
  • 5.039 in (6)
  • 6.0 in (9)
  • 6.299 in (5)
  • 7.0 in (3)
  • 7.875 in (2)
  • 8.0 in (9)
  • 9.0 in (1)
  • 10.0 in (7)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 24.0 mm (4)
  • 25.401 mm