Country

Lingua

Unità di misura

Prezzo di listino:

Sconto: %

Prezzo di listino:

$968.55 /each

Your price::

Qty

Configure

KSEM PLUS™ A1 Heads 31.75 - 70.99mm / 1.250 - 2.794″

Name: KSEM PLUS™ A1 Heads 31.75 - 70.99mm / 1.250 - 2.794″
SKU: 3794919
Rating: 0 (0 reviews)

Teste A1 KSEM PLUS™

Metric

Inch

Codice materiale SAP	3794919
Codice catalogo ISO	KSEMP3651FDS36A1M
Codice catalogo ANSI	KSEMP1438FDS36A1
[D1] Diametro punta M	36.525 mm
[D1] Diametro punta M	1.438 in
[PDD] Diametro taglio punta di centraggio	14 mm
[PDD] Diametro taglio punta di centraggio	.5512 in
[LPR] Sporgenza	22.86 mm
[LPR] Sporgenza	.9 in
[L1] Lunghezza spessore inserto	20 mm
[L1] Lunghezza spessore inserto	.787 in
[CSMS] Dimensioni sistema lato macchina	FDS36
[SSC] Dimensione della sede dell’inserto	B

Visualizzare tutte le varianti del prodotto

Uses and application

Foratura — Adduzione interna refrigerante

Materiale da lavorare

P Acciaio

M Acciai inossidabili

K Ghisa

N Materiali non ferrosi

S Leghe resistenti al calore

Features and benefits

• Per assicurare al 100% la stabilità del sistema, gli inserti KSEM™ utilizzati per KSEM PLUS non devono essere riaffilati.
• Le teste KSEM PLUS sono consegnate con tutte le viti inserto.
• Le teste KSEM PLUS vengono spedite con due chiavi, una per l’inserto KSEM e una da utilizzare per gli inserti DFT™/DFR™ e per il montaggio del corpo sulla testa.
• Ordinare i codoli KSEM PLUS utilizzando la dimensione di accoppiamento (CSMS) per determinare l’associazione tra teste e codoli.
• Nel disegno, PDD si riferisce al diametro D1 degli inserti KSEM HPG e HPCCL da utilizzare con KSEM PLUS.
• Ordinare separatamente gli inserti (KSEM, DFT e DFR) per KSEM PLUS.

Lato macchina

Lato pezzo

D1	tolerance h8 + / -
.500–.709	+.000/-.0010
.709–1.181	+.000/-.0013
1.181–1.575	+.000/-.0015

D1	tolerance h8 + / -
12,5–18	+0,000/-0,027
18–30	+0,000/-0,033
30–40	+0,000/-0,039

Metric
Material Group		Condition	Cutting Speed vc			Recommended Feed Rate (fz) by Diameter
			Range m/min			Recommended Feed Rate (fz) by Diameter
			Min	Starting Value	Max	Ø	KSEM 14….17 DFR/DFC04... 28.00 31,74	KSEM 15….18 DFT/DFC05… 31,74 35,99	KSEM 13….22 DFT/DFC06... 36,00 44,99	KSEM 18….28 DFT/DFC07... 45,00 55,99	KSEM 20….34 DFT/DFC09... 56,00 70
P	1	S	115	235	290	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		U	90	160	215	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		I	65	100	140	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
	2	S	90	190	230	mm/r	0,160–0,280	0,160–0,280	0,200–0,360	0,200–0,400	0,200–0,450
		U	71	130	170	mm/r	0,160–0,280	0,160–0,280	0,200–0,360	0,200–0,400	0,200–0,450
		I	50	80	110	mm/r	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
	3	S	90	180	230	mm/r	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
		U	70	120	170	mm/r	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
		I	50	70	106	mm/r	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
	4	S	90	140	220	mm/r	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
		U	70	110	160	mm/r	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
		I	50	80	110	mm/r	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
	5	S	90	130	210	mm/r	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
		U	70	100	150	mm/r	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
		I	50	70	100	mm/r	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
	6	S	70	90	180	mm/r	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
		U	50	75	120	mm/r	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
		I	40	60	100	mm/r	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
M	1	S	60	110	135	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		U	40	70	90	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		I	30	50	65	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
	2	S	60	100	135	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		U	40	60	90	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		I	30	50	65	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
	3	S	50	90	135	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		U	40	60	90	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		I	25	40	65	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
K	1	S	90	170	230	mm/r	0,180–0,300	0,180–0,300	0,216–0,360	0,240–0,420	0,300–0,480
		U	60	120	160	mm/r	0,180–0,300	0,180–0,300	0,216–0,360	0,240–0,420	0,300–0,480
		I	40	70	90	mm/r	0,180–0,300	0,180–0,300	0,216–0,360	0,240–0,420	0,300–0,480
	2	S	90	160	220	mm/r	0,180–0,300	0,180–0,300	0,216–0,360	0,240–0,420	0,300–0,480
		U	60	110	160	mm/r	0,180–0,300	0,180–0,300	0,216–0,360	0,240–0,420	0,300–0,480
		I	40	70	100	mm/r	0,180–0,300	0,180–0,300	0,216–0,360	0,240–0,420	0,300–0,480
	3	S	90	150	210	mm/r	0,180–0,300	0,180–0,300	0,216–0,360	0,240–0,420	0,300–0,480
		U	60	100	150	mm/r	0,180–0,300	0,180–0,300	0,216–0,360	0,240–0,420	0,300–0,480
		I	35	60	90	mm/r	0,180–0,300	0,180–0,300	0,216–0,360	0,240–0,420	0,300–0,480
N	1	S	150	240	360	mm/r	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		U	100	160	240	mm/r	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		I	60	100	160	mm/r	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
	2	S	150	220	360	mm/r	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		U	100	150	240	mm/r	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		I	60	100	160	mm/r	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
	3	S	150	200	360	mm/r	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		U	100	140	240	mm/r	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		I	60	90	160	mm/r	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
	4	S	150	200	360	mm/r	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		U	100	140	240	mm/r	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		I	60	90	160	mm/r	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
	5	S	150	200	360	mm/r	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		U	100	140	240	mm/r	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		I	60	90	160	mm/r	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
	6	S	150	200	360	mm/r	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		U	100	140	240	mm/r	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		I	60	90	160	mm/r	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
	7	S	110	220	260	mm/r	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		U	70	140	170	mm/r	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		I	45	90	110	mm/r	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
S	1	S	25	50	75	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		U	20	40	60	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		I	15	30	50	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
	2	S	20	40	60	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		U	15	30	45	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		I	12	25	35	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
	3	S	20	40	60	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		U	15	30	45	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		I	12	25	40	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
	4	S	20	40	60	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		U	15	30	45	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		I	12	25	40	mm/r	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360

Inch
Material Group		Condition	Cutting Speed vc			Recommended Feed Rate (fz) by Diameter
			Range SFM			Recommended Feed Rate (fz) by Diameter
			Min	Starting Value	Max	Ø	KSEM 14….17 DFR/DFC04... 1.102 1.249	KSEM 15….18 DFT/DFC05… 1.250 1.416	KSEM 13….22 DFT/DFC06... 1.417 1.771	KSEM 18….28 DFT/DFC07... 1.772 2.204	KSEM 20….34 DFT/DFC09... 2.205 4.0295
P	1	S	370	775	944	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014
		U	290	532	698	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014
		I	205	327	451	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014
	2	S	295	623	755	IPR	0.006–0.011	0.006–0.011	0.008–0.014	0.008–0.016	0.008–0.018
		U	233	427	558	IPR	0.006–0.011	0.006–0.011	0.008–0.014	0.008–0.016	0.008–0.018
		I	164	262	361	IPR	0.006–0.011	0.006–0.011	0.008–0.014	0.008–0.016	0.008–0.018
	3	S	295	591	755	IPR	0.006–0.011	0.006–0.011	0.008–0.014	0.008–0.016	0.008–0.018
		U	230	394	558	IPR	0.006–0.011	0.006–0.011	0.008–0.014	0.008–0.016	0.008–0.018
		I	164	230	361	IPR	0.006–0.011	0.006–0.011	0.008–0.014	0.008–0.016	0.008–0.018
	4	S	295	459	722	IPR	0.006–0.011	0.006–0.011	0.008–0.014	0.008–0.016	0.008–0.018
		U	230	361	525	IPR	0.006–0.011	0.006–0.011	0.008–0.014	0.008–0.016	0.008–0.018
		I	264	262	361	IPR	0.006–0.011	0.006–0.011	0.008–0.014	0.008–0.016	0.008–0.018
	5	S	295	427	689	IPR	0.006–0.011	0.006–0.011	0.008–0.014	0.008–0.016	0.008–0.018
		U	230	328	689	IPR	0.006–0.011	0.006–0.011	0.008–0.014	0.008–0.016	0.008–0.018
		I	164	230	492	IPR	0.006–0.011	0.006–0.011	0.008–0.014	0.008–0.016	0.008–0.018
	6	S	230	295	591	IPR	0.006–0.011	0.006–0.011	0.008–0.014	0.008–0.016	0.008–0.018
		U	164	246	394	IPR	0.006–0.011	0.006–0.011	0.008–0.014	0.008–0.016	0.008–0.018
		I	131	197	328	IPR	0.006–0.011	0.006–0.011	0.008–0.014	0.008–0.016	0.008–0.018
M	1	S	197	361	443	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014
		U	131	230	295	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014
		I	98	164	213	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014
	2	S	197	328	443	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014
		U	131	197	295	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014
		I	98	164	213	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014
	3	S	164	295	443	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014
		U	131	197	295	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014
		I	82	131	213	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014
K	1	S	295	558	755	IPR	0.007–0.012	0.007–0.012	0.009–0.014	0.009–0.017	0.012–0.019
		U	197	394	525	IPR	0.007–0.012	0.007–0.012	0.009–0.014	0.009–0.017	0.012–0.019
		I	131	230	295	IPR	0.007–0.012	0.007–0.012	0.009–0.014	0.009–0.017	0.012–0.019
	2	S	295	525	722	IPR	0.007–0.012	0.007–0.012	0.009–0.014	0.009–0.017	0.012–0.019
		U	197	361	525	IPR	0.007–0.012	0.007–0.012	0.009–0.014	0.009–0.017	0.012–0.019
		I	131	230	328	IPR	0.007–0.012	0.007–0.012	0.009–0.014	0.009–0.017	0.012–0.019
	3	S	295	492	689	IPR	0.007–0.012	0.007–0.012	0.009–0.014	0.009–0.017	0.012–0.019
		U	197	328	492	IPR	0.007–0.012	0.007–0.012	0.009–0.014	0.009–0.017	0.012–0.019
		I	115	197	295	IPR	0.007–0.012	0.007–0.012	0.009–0.014	0.009–0.017	0.012–0.019
N	1	S	492	787	1181	IPR	0.005–0.008	0.005–0.008	0.006–0.011	0.006–0.013	0.008–0.016
		U	328	525	787	IPR	0.005–0.008	0.005–0.008	0.006–0.011	0.006–0.013	0.008–0.016
		I	197	328	525	IPR	0.005–0.008	0.005–0.008	0.006–0.011	0.006–0.013	0.008–0.016
	2	S	492	722	1181	IPR	0.005–0.008	0.005–0.008	0.006–0.011	0.006–0.013	0.008–0.016
		U	328	492	787	IPR	0.005–0.008	0.005–0.008	0.006–0.011	0.006–0.013	0.008–0.016
		I	197	328	525	IPR	0.005–0.008	0.005–0.008	0.006–0.011	0.006–0.013	0.008–0.016
	3	S	492	722	1181	IPR	0.005–0.008	0.005–0.008	0.006–0.011	0.006–0.013	0.008–0.016
		U	328	492	787	IPR	0.005–0.008	0.005–0.008	0.006–0.011	0.006–0.013	0.008–0.016
		I	197	328	525	IPR	0.005–0.008	0.005–0.008	0.006–0.011	0.006–0.013	0.008–0.016
	4	S	492	722	1181	IPR	0.005–0.008	0.005–0.008	0.006–0.011	0.006–0.013	0.008–0.016
		U	328	492	787	IPR	0.005–0.008	0.005–0.008	0.006–0.011	0.006–0.013	0.008–0.016
		I	197	328	525	IPR	0.005–0.008	0.005–0.008	0.006–0.011	0.006–0.013	0.008–0.016
	5	S	492	722	1181	IPR	0.005–0.008	0.005–0.008	0.006–0.011	0.006–0.013	0.008–0.016
		U	328	492	787	IPR	0.005–0.008	0.005–0.008	0.006–0.011	0.006–0.013	0.008–0.016
		I	197	328	525	IPR	0.005–0.008	0.005–0.008	0.006–0.011	0.006–0.013	0.008–0.016
	6	S	492	656	1181	IPR	0.005–0.008	0.005–0.008	0.006–0.011	0.006–0.013	0.008–0.016
		U	328	459	787	IPR	0.005–0.008	0.005–0.008	0.006–0.011	0.006–0.013	0.008–0.016
		I	197	295	525	IPR	0.005–0.008	0.005–0.008	0.006–0.011	0.006–0.013	0.008–0.016
	7	S	361	722	853	IPR	0.005–0.008	0.005–0.008	0.006–0.011	0.006–0.013	0.008–0.016
		U	230	459	558	IPR	0.005–0.008	0.005–0.008	0.006–0.011	0.006–0.013	0.008–0.016
		I	148	295	361	IPR	0.005–0.008	0.005–0.008	0.006–0.011	0.006–0.013	0.008–0.016
S	1	S	82	164	246	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014
		U	66	131	197	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014
		I	49	98	164	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014
	2	S	66	131	197	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014
		U	49	98	148	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014
		I	39	82	115	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014
	3	S	66	131	197	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014
		U	49	98	148	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014
		I	39	82	131	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014
	4	S	66	131	197	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014
		U	49	98	148	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014
		I	39	82	131	IPR	0.005–0.010	0.005–0.010	0.006–0.011	0.006–0.013	0.008–0.014

Metric
		Condition	Cutting Speed vc
			Range m/min			Recommended Feed Rate (fz) by Diameter
Material Group			Min	Starting Value	Max	Ø	KSEM 14….17 DFR/DFC04... 28,00 31,74	KSEM 15….18 DFT/DFC05… 31,75 35,99	KSEM 13….22 DFT/DFC06... 36,00 44,99	KSEM 18….28 DFT/DFC07... 45,00 55,99	KSEM 20….34 DFT/DFC09... 56,00 70,00
P	1	S	115	235	290	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		U	90	160	215	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		I	65	100	140	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
	2	S	90	190	230	mm/dev	0,160–0,280	0,160–0,280	0,200–0,360	0,200–0,400	0,200–0,450
		U	71	130	170	mm/dev	0,160–0,280	0,160–0,280	0,200–0,360	0,200–0,400	0,200–0,450
		I	50	80	110	mm/dev	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
	3	S	90	180	230	mm/dev	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
		U	70	120	170	mm/dev	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
		I	50	70	106	mm/dev	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
	4	S	90	140	220	mm/dev	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
		U	70	110	160	mm/dev	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
		I	50	80	110	mm/dev	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
	5	S	90	130	210	mm/dev	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
		U	70	100	150	mm/dev	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
		I	50	70	100	mm/dev	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
	6	S	70	90	180	mm/dev	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
		U	50	75	120	mm/dev	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
		I	40	60	100	mm/dev	0,160–0,280	0,160–0,280	0,200–0,320	0,200–0,400	0,200–0,450
M	1	S	60	110	135	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		U	40	70	90	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		I	30	50	65	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
	2	S	60	100	135	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		U	40	60	90	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		I	30	50	65	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
	3	S	50	90	135	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		U	40	60	90	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		I	25	40	65	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
K	1	S	90	170	230	mm/dev	0,180 - 0,300	0,180 - 0,300	0,216 - 0,360	0,240 - 0,420	0,300 - 0,480
		U	60	120	160	mm/dev	0,180–0,300	0,180–0,300	0,216–0,360	0,240–0,420	0,300–0,480
		I	40	70	90	mm/dev	0,180 - 0,300	0,180 - 0,300	0,216 - 0,360	0,240 - 0,420	0,300 - 0,480
	2	S	90	160	220	mm/dev	0,180–0,300	0,180–0,300	0,216–0,360	0,240–0,420	0,300–0,480
		U	60	110	160	mm/dev	0,180 - 0,300	0,180 - 0,300	0,216 - 0,360	0,240 - 0,420	0,300 - 0,480
		I	40	70	100	mm/dev	0,180–0,300	0,180–0,300	0,216–0,360	0,240–0,420	0,300–0,480
	3	S	90	150	210	mm/dev	0,180 - 0,300	0,180 - 0,300	0,216 - 0,360	0,240 - 0,420	0,300 - 0,480
		U	60	100	150	mm/dev	0,180–0,300	0,180–0,300	0,216–0,360	0,240–0,420	0,300–0,480
		I	35	60	90	mm/dev	0,180 - 0,300	0,180 - 0,300	0,216 - 0,360	0,240 - 0,420	0,300 - 0,480
N	1	S	150	240	360	mm/dev	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		U	100	160	240	mm/dev	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		I	60	100	160	mm/dev	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
	2	S	150	220	360	mm/dev	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		U	100	150	240	mm/dev	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		I	60	100	160	mm/dev	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
	3	S	150	200	360	mm/dev	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		U	100	140	240	mm/dev	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		I	60	90	160	mm/dev	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
	4	S	150	200	360	mm/dev	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		U	100	140	240	mm/dev	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		I	60	90	160	mm/dev	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
	5	S	150	200	360	mm/dev	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		U	100	140	240	mm/dev	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		I	60	90	160	mm/dev	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
	6	S	150	200	360	mm/dev	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		U	100	140	240	mm/dev	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		I	60	90	160	mm/dev	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
	7	S	110	220	260	mm/dev	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		U	70	140	170	mm/dev	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
		I	45	90	110	mm/dev	0,120–0,200	0,120–0,200	0,144–0,280	0,160–0,320	0,200–0,400
S	1	S	25	50	75	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		U	20	40	60	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		I	15	30	50	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
	2	S	20	40	60	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		U	15	30	45	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		I	12	25	35	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
	3	S	20	40	60	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		U	15	30	45	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		I	12	25	40	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
	4	S	20	40	60	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		U	15	30	45	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360
		I	12	25	40	mm/dev	0,130–0,250	0,130–0,250	0,160–0,280	0,160–0,320	0,200–0,360

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO Catalogo	Grade

Benvenuto

Conferma le tue preferenze

Aggiorna preferenze

Suggerimenti sui prodotti

Product Family suggestions

Contatta il Team di vendita

Contatta il Team di vendita

Modifica della soluzione

Soluzione aggiunta

KSEM PLUS™ A1 Heads 31.75 - 70.99mm / 1.250 - 2.794″

Teste A1 KSEM PLUS™

Uses and application

Materiale da lavorare

Features and benefits

Lato macchina

Lato pezzo

Suggerimenti sui prodotti

Product Family suggestions

Contatta il Team di vendita

Notifications

Contatta il Team di vendita

Sending to SolidCAM in progress...

KSEM PLUS™ A1 Heads 31.75 - 70.99mm / 1.250 - 2.794″

Teste A1 KSEM PLUS™

Uses and application

Materiale da lavorare

Features and benefits

Lato macchina

Lato pezzo