Utensili con codolo CAT50

Mandrini portapinze ad angolo singolo TG

Caratteristiche e vantaggi

  • Tremendous Grip (vantaggio 3:1).
  • Superficie completamente liscia, dalla ghiera alla pinza.
  • La ghiera utilizza una chiave a forchetta o una chiave per ghiere.
  • È disponibile il tappo di tenuta del disco della ghiera per l'adduzione interna di refrigerante per evitare la contaminazione della pinza.

Specifiche

TG liscia-CV forma B/AD

numero d’ordinecodice catalogoCST serie di pinzeD11L1L9VWFghierachiaveCoppia massima raccomandata (ft.lbs)vite di arrestodimensione chiave vite di regolazionelbs
2993248 »CV50BTGF050400TG501.504.001.4621LNATGF050MHSW34M50SS056041G4 mm & 5/327.38
2993249 »CV50BTGF050600TG501.506.001.4621LNATGF050MHSW34M50SS056041G4 mm & 5/327.75
2993250 »CV50BTGF050800TG501.508.001.4621LNATGF050MHSW34M50SS056041G4 mm & 5/328.48
2993252 »CV50BTGF075400TG751.974.001.8922LNATGF075MHSW45M100SS081041G4 mm & 5/328.15
2993253 »CV50BTGF075600TG751.976.001.8922LNATGF075MHSW45M100SS081041G4 mm & 5/329.52
2993255 »CV50BTGF100275TG1002.362.752.4412LNATGF100MHSW58M150SS112041G4 mm & 5/327.13
2993256 »CV50BTGF100400TG1002.364.002.4412LNATGF100MHSW58M150SS112041G4 mm & 5/328.28
2993257 »CV50BTGF100600TG1002.366.002.4432LNATGF100MHSW58M150SS112041G4 mm & 5/3210.39
2993258 »CV50BTGF100800TG1002.368.002.4432LNATGF100MHSW58M150SS112041G4 mm & 5/3212.53
NOTE: Collet must be loaded into locknut first. Before loading into the chuck body, insert the cutting tool, then tighten to the recommended tightening torque. Collet chuck technical section, see page [REFERENCE]. Supplied with locknut and stop screw. Locknut wrench must be ordered separately. Locknut disk sealing cap is available and must be ordered separately; see pages [REFERENCE]. Coolant disks for sealing cap are available and must be ordered separately; see pages [REFERENCE]. Stop screw coolant caps are available and must be ordered separately; see pages [REFERENCE]. Balanceable/interchangeable locknuts are available and must be ordered separately; see page [REFERENCE]. TG standard straight-bore collets, see page [REFERENCE]. TG tap collets, see page [REFERENCE]. For retention knobs, see page [REFERENCE].

Uso prodotto /