Tech Tip: Understanding Milling Insert Nomenclature

                      (1)    (2)    (3)    (4)    (5)    (6)    (7)    (8)    (9)    (10)    (11)    (12)    (13)
ANSI Inch      S      E      K      R      4       2     AF     T      N       6       G       D        P

  1. First station indicates shape of insert.
  2. Second station shows relief angle or rake angle of the insert.
  3. The third station provides a working gage for repeatability. It sets tolerance to the I.C. (inscribed circle) and creates a gage tolerance for the I.C. to the over-the-nose radius along with the thickness of the insert.
  4. Fourth station indicates geometry and clamping insert type. It designates with or without hole, shape and size of hole, chipbreaker form, and single- or double-sided insert.
  5. Fifth station indicates I.C. size of the insert.
  6. Sixth station designates insert thickness.
    T = 1/16” inch increments
  7. Seventh station designates corner configuration of the insert.
  8. Cutting edge form
    F for sharp
    E For Honed edge
    T for T-Land
    S for Honed T-Land
  9. Designates N for neutral, R for right-handed, or L for left-handed insert.
  10. Designates facet width of insert.
    2 - .0312”
    3 - .0469”
    4 - .0625”
    6 - .0938”
  11. Edge prep size
    L – Light sharp or lightly honed or T-landed
    G – General Medium hone and/or T-land
    H – Heavy – large hone and/or T-land
  12. Rake face angle
    Angle on insert prior to installation.
    N – 0 degree, A – 3 degree, B – 5 degree, C – 7 degree, P – 11 degree,
    D- 15 degree, E – 20 degree, F - 25 degree, G – 30 degree.
  13. Added Info
    J – polished rake face
    P – partial T-land
    W- Wiper Insert
マイソリューションページにを追加しようとしています. 続行しますか?
product-image
Please adjust the following properties from

ISO製品型番

ANSI製品型番

to find similar products.

The following files are available

Please select a file to download

Models

ダッシュボード情報を表示するには、ログインする必要があります
Session expired due to inactivity, please login again
カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
アイテムがカートに正常に追加されました
カートを表示

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO製品型番 材種    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?