Combination Tools
Combination drilling tools integrate centering, drilling, and countersinking all into a single operation, increasing productivity by reducing cycle time and tool changes. The BF and SEFAS™ systems adapt to various hole geometries with full through-coolant capabilities. The HiPACS system achieves precise countersinking for aerospace applications. KenShape MaPACS and MaxPACS countersinks excel in manual CFRP countersinking for aerospace rivet hole drilling, offering minimal operator effort, superior hole quality, and competitive cost per hole. These tools set new benchmarks in cost-effectiveness and flexibility.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (223)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(223)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(223)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(223)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(223)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(223)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(223)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(179)
- M Stainless Steel (115)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(115)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(115)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(112)
- K Cast Iron (224)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(224)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(224)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(224)
- N Non-Ferrous Materials (126)
- N1Wrought Aluminum (126)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(126)
- N3High-Silicon Aluminum Alloys Si >12.2%(126)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (126)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (116)
- N6Carbon, Graphite Composites, CFRP (116)
- N7MMC's (113)
- S High-Temp Alloys (122)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(112)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(112)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(112)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(122)
- H Hardened Materials (45)
- H1Hardened Materials 44-48 HRC(45)
- H2Hardened Materials 48-55 HRC(45)
- H3Hardened Materials 56-60 HRC(45)
- H4Hardened Materials >60 HRC(45)
- C CFRP Materials (28)
- C1CFRP, CFRP / CFRP (18)
- C2CFRP / Aluminium CFRP / Non-Ferrous (18)
- C3CFRP / Titanium CFRP / High Temp (18)
- C4CFRP / Stainless Steel (18)
Select First Choice
- IN (3)
Applications
Applications
Counterboring (1)
Countersinking (73)
Drilling (212)
Inclined Exit Drilling (47)
Stacked Plates Drilling (164)
Cutting Diameter
Cutting Diameter
- 3.175 mm(1)
- 3.4 mm(2)
- 3.5 mm(1)
- 3.6 mm(1)
- 3.8 mm(1)
- 3.9 mm(1)
- 3.9688 mm(1)
- 3.97 mm(1)
- 4.0 mm(4)
- 4.1 mm(3)
- 4.2 mm(1)
- 4.3 mm(1)
- 4.5 mm(1)
- 4.6 mm(3)
- 4.623 mm(2)
- 4.7625 mm(1)
- 4.763 mm(1)
- 4.828 mm(5)
- 5.0 mm(1)
- 5.1 mm(3)
- 5.2 mm(1)
- 5.3 mm(1)
- 5.4 mm(1)
- 5.41 mm(1)
- 5.5 mm(1)
- 5.55 mm(3)
- 5.558 mm(5)
- 5.6 mm(1)
- 5.8 mm(1)
- 6.0 mm(4)
- 6.1 mm(3)
- 6.2 mm(1)
- 6.35 mm(8)
- 6.4 mm(1)
- 6.5 mm(1)
- 6.528 mm(1)
- 6.6 mm(1)
- 6.7 mm(1)
- 6.746 mm(1)
- 6.8 mm(1)
- 6.9 mm(1)
- 7.0 mm(1)
- 7.145 mm(1)
- 7.3 mm(3)
- 7.4 mm(1)
- 7.5 mm(1)
- 7.5406 mm(1)
- 7.8 mm(1)
- 7.9 mm(1)
- 7.9375 mm(1)
- 7.938 mm(5)
- 7.95 mm(1)
- 8.0 mm(5)
- 8.1 mm(5)
- 8.2 mm(1)
- 8.204 mm(1)
- 8.3 mm(1)
- 8.334 mm(1)
- 8.3344 mm(1)
- 8.4 mm(2)
- 8.433 mm(1)
- 8.5 mm(1)
- 8.6 mm(3)
- 8.7 mm(3)
- 8.733 mm(3)
- 8.8 mm(1)
- 9.0 mm(1)
- 9.1 mm(3)
- 9.129 mm(1)
- 9.347 mm(1)
- 9.4 mm(1)
- 9.5 mm(1)
- 9.525 mm(6)
- 9.8 mm(1)
- 9.921 mm(1)
- 10.0 mm(6)
- 10.1 mm(4)
- 10.2 mm(1)
- 10.262 mm(2)
- 10.3 mm(1)
- 10.32 mm(4)
- 10.4 mm(3)
- 10.49 mm(2)
- 10.5 mm(1)
- 10.6 mm(1)
- 10.7156 mm(1)
- 10.8 mm(1)
- 11.0 mm(1)
- 11.1 mm(3)
- 11.112 mm(1)
- 11.113 mm(1)
- 11.125 mm(1)
- 11.2 mm(1)
- 11.5 mm(1)
- 11.508 mm(1)
- 11.7 mm(1)
- 11.8 mm(1)
- 11.9 mm(1)
- 12.0 mm(5)
- 12.1 mm(1)
- 12.2 mm(4)
- 12.304 mm(2)
- 12.5 mm(2)
- 12.7 mm(1)
- 12.8 mm(1)
- 13.0 mm(1)
- 13.096 mm(1)
- 13.1 mm(2)
- 13.2 mm(1)
- 13.5 mm(1)
- 14.0 mm(6)
- 14.1 mm(4)
- 14.2 mm(1)
- 14.288 mm(4)
- 14.3 mm(3)
- 14.4 mm(2)
- 14.5 mm(1)
- 14.8 mm(1)
- 15.0 mm(3)
- 15.1 mm(2)
- 15.2 mm(2)
- 15.38 mm(2)
- 15.479 mm(2)
- 15.5 mm(3)
- 15.6 mm(2)
- 15.8 mm(2)
- 15.875 mm(4)
- 16.0 mm(5)
- 16.027 mm(1)
- 16.1 mm(1)
- 16.3 mm(1)
- 16.4 mm(1)
- 16.5 mm(3)
- 16.6 mm(1)
- 16.67 mm(1)
- 16.7 mm(1)
- 17.0 mm(1)
- 17.475 mm(1)
- 17.5 mm(3)
- 18.0 mm(3)
- 19.05 mm(1)
- 20.65 mm(1)
- 23.825 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 10.0 mm(1)
- 10.6 mm(1)
- 11.2 mm(1)
- 12.3 mm(1)
- 12.9 mm(1)
- 13.3 mm(1)
- 13.4 mm(1)
- 13.7 mm(1)
- 14.2 mm(1)
- 14.7 mm(1)
- 15.6 mm(1)
- 15.8 mm(1)
- 15.9 mm(1)
- 16.6 mm(1)
- 17.6 mm(1)
- 17.8 mm(1)
- 18.2 mm(1)
- 18.6 mm(1)
- 19.0 mm(1)
- 19.3 mm(1)
- 19.4 mm(2)
- 19.5 mm(1)
- 20.3 mm(1)
- 21.0 mm(1)
- 21.1 mm(1)
- 21.5 mm(1)
- 22.0 mm(1)
- 22.2 mm(1)
- 22.5 mm(1)
- 22.6 mm(1)
- 22.9 mm(1)
- 23.2 mm(1)
- 23.4 mm(1)
- 23.5 mm(1)
- 23.9 mm(1)
- 24.2 mm(1)
- 24.6 mm(1)
- 24.9 mm(1)
- 25.0 mm(10)
- 25.3 mm(1)
- 25.4 mm(1)
- 25.5 mm(1)
- 26.2 mm(1)
- 26.5 mm(1)
- 26.6 mm(2)
- 26.8 mm(2)
- 27.0 mm(3)
- 27.2 mm(1)
- 27.4 mm(1)
- 27.5 mm(1)
- 27.7 mm(1)
- 28.0 mm(1)
- 28.3 mm(1)
- 28.4 mm(1)
- 28.5 mm(1)
- 28.8 mm(1)
- 29.1 mm(1)
- 29.5 mm(1)
- 29.6 mm(1)
- 29.9 mm(1)
- 30.0 mm(8)
- 30.7 mm(1)
- 31.0 mm(1)
- 31.2 mm(2)
- 31.4 mm(1)
- 31.5 mm(2)
- 31.7 mm(1)
- 31.9 mm(1)
- 32.2 mm(1)
- 32.4 mm(1)
- 32.7 mm(1)
- 32.9 mm(2)
- 33.1 mm(2)
- 33.8 mm(2)
- 34.3 mm(1)
- 34.5 mm(1)
- 34.8 mm(1)
- 34.9 mm(1)
- 35.0 mm(1)
- 35.56 mm(1)
- 35.6 mm(1)
- 36.0 mm(1)
- 36.3 mm(1)
- 36.7 mm(1)
- 36.9 mm(1)
- 37.6 mm(1)
- 38.5 mm(1)
- 38.6 mm(1)
- 38.7 mm(1)
- 40.2 mm(1)
- 40.7 mm(1)
- 41.5 mm(1)
- 41.7 mm(1)
- 42.0 mm(1)
- 42.2 mm(1)
- 43.1 mm(1)
- 43.5 mm(1)
- 43.6 mm(1)
- 44.5 mm(1)
- 45.0 mm(1)
- 48.0 mm(2)
- 50.0 mm(1)
- 51.0 mm(1)
- 58.0 mm(1)
to
Reach
Reach
- 18.2 mm(1)
- 18.9 mm(1)
- 19.6 mm(1)
- 20.9 mm(1)
- 21.6 mm(1)
- 22.1 mm(1)
- 22.3 mm(1)
- 22.7 mm(1)
- 23.3 mm(1)
- 23.9 mm(1)
- 25.0 mm(1)
- 25.5 mm(1)
- 25.6 mm(1)
- 26.5 mm(1)
- 27.7 mm(1)
- 28.0 mm(1)
- 28.5 mm(1)
- 29.0 mm(1)
- 29.5 mm(1)
- 30.0 mm(1)
- 30.2 mm(1)
- 30.3 mm(1)
- 30.5 mm(1)
- 31.5 mm(1)
- 32.4 mm(1)
- 32.6 mm(1)
- 33.0 mm(10)
- 33.1 mm(1)
- 33.7 mm(1)
- 34.0 mm(1)
- 34.4 mm(1)
- 34.5 mm(1)
- 34.9 mm(1)
- 35.3 mm(1)
- 35.5 mm(1)
- 35.7 mm(1)
- 36.2 mm(1)
- 36.5 mm(1)
- 37.5 mm(1)
- 37.9 mm(1)
- 38.0 mm(10)
- 38.4 mm(1)
- 38.5 mm(1)
- 39.6 mm(1)
- 40.0 mm(1)
- 40.1 mm(1)
- 40.4 mm(1)
- 40.6 mm(1)
- 40.8 mm(2)
- 41.4 mm(1)
- 41.6 mm(1)
- 41.8 mm(1)
- 42.0 mm(1)
- 42.4 mm(1)
- 42.8 mm(1)
- 42.9 mm(1)
- 43.0 mm(1)
- 43.1 mm(1)
- 43.9 mm(1)
- 44.0 mm(1)
- 44.9 mm(1)
- 45.1 mm(1)
- 45.5 mm(1)
- 46.5 mm(1)
- 46.9 mm(1)
- 47.2 mm(1)
- 47.7 mm(1)
- 48.0 mm(1)
- 48.1 mm(1)
- 48.4 mm(1)
- 48.6 mm(1)
- 49.0 mm(1)
- 49.3 mm(1)
- 49.4 mm(1)
- 49.7 mm(1)
- 50.3 mm(1)
- 50.5 mm(2)
- 50.8 mm(1)
- 51.7 mm(2)
- 52.4 mm(1)
- 52.7 mm(1)
- 53.1 mm(1)
- 53.3 mm(1)
- 53.7 mm(1)
- 54.6 mm(1)
- 54.7 mm(1)
- 55.6 mm(1)
- 56.2 mm(1)
- 56.7 mm(1)
- 57.6 mm(1)
- 59.0 mm(1)
- 59.4 mm(1)
- 59.7 mm(1)
- 61.7 mm(1)
- 63.0 mm(1)
- 64.1 mm(1)
- 64.4 mm(1)
- 65.6 mm(1)
- 66.2 mm(1)
- 66.9 mm(1)
- 68.2 mm(2)
- 69.5 mm(1)
- 72.4 mm(2)
- 76.5 mm(1)
to
Connection Style
Connection Style
- BF Drill Shank (111)
- HC Drill Sleeve with Pocket (20)
- Straight-Cylindrical (60)
- Whistle Notch 2 (24)
Number of Flutes
Number of Flutes
- 1 (24)
- 2 (191)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (61)
- 1.0 (71)
to
Over All Length [L]
Over All Length [L]
- 49.5 mm(1)
- 50.0 mm(1)
- 55.0 mm(7)
- 56.5 mm(1)
- 58.0 mm(3)
- 62.0 mm(8)
- 66.0 mm(10)
- 68.0 mm(1)
- 70.5 mm(1)
- 74.0 mm(12)
- 75.0 mm(10)
- 78.0 mm(1)
- 79.0 mm(8)
- 80.0 mm(11)
- 80.5 mm(1)
- 82.0 mm(1)
- 82.5 mm(1)
- 84.0 mm(11)
- 87.5 mm(12)
- 89.0 mm(7)
- 91.0 mm(1)
- 94.0 mm(1)
- 95.0 mm(9)
- 97.3 mm(9)
- 102.0 mm(15)
- 103.12 mm(1)
- 103.124 mm(1)
- 104.5 mm(1)
- 104.902 mm(1)
- 107.0 mm(3)
- 108.0 mm(1)
- 109.474 mm(1)
- 109.5 mm(1)
- 109.538 mm(1)
- 111.0 mm(3)
- 113.0 mm(1)
- 115.0 mm(5)
- 117.0 mm(2)
- 117.4 mm(6)
- 117.6 mm(1)
- 118.0 mm(1)
- 120.5 mm(1)
- 121.0 mm(2)
- 122.0 mm(1)
- 123.0 mm(1)
- 127.1 mm(9)
- 127.4 mm(8)
- 130.6 mm(1)
- 132.5 mm(1)
- 133.0 mm(1)
- 137.0 mm(1)
- 141.0 mm(1)
- 143.0 mm(1)
- 144.0 mm(1)
- 146.05 mm(1)
- 149.352 mm(1)
- 153.924 mm(1)
- 155.7 mm(1)
- 160.27 mm(1)
- 163.576 mm(1)
- 163.58 mm(1)
- 166.37 mm(1)
- 166.624 mm(1)
- 168.275 mm(1)
- 169.99 mm(1)
- 184.15 mm(1)
- 190.5 mm(1)
to
Availability
gsaApproval
gsaApproval
Corner Chamfer
Corner Chamfer
- 0.0 mm(34)
to
Application
Coating
Coating
- TiN (1)
- TiN/TiAlN (78)
- Uncoated (20)
Grade Of Cutting Tool
Grade Of Cutting Tool
- CS5 (91)
- KC7015 (37)
- KC7215 (39)
- KC7315 (92)
- KC7325 (3)
- KC7410 (12)
- KCC05 (10)
- KCC10 (3)
- KCMS15 (3)
- KCP15 (17)
- KCP15A (3)
- KCPM45 (10)
- KCU15 (98)
- KD1425 (5)
- KDC05 (5)
- KDC15 (5)
- KM1 (25)
- KMF (86)
- KN15 (3)
Hand Of Tool
Hand Of Tool
- R (215)
Wiper Insert
Wiper Insert
- N (34)
Drill Type
Drill Type
- 81-01 (117)
- 86-01 (12)
- 86-04 (8)
- 86-09 (78)
Countersunk Angle
Countersunk Angle
- 30.0 (50)
- 41.0 (85)
- 45.0 (99)
- 50.0 (5)
to
Front-End
Adapter Front-End
Adapter Front-End
- HYDRAULIC CHUCK (32)
- HYDRAULIC CHUCK-SLIM LINE (10)
Cutting Width
Cutting Width
- 5.8 mm(1)
- 6.1 mm(1)
- 9.8 mm(2)
to
Front End Type
Front End Type
- ZYL - Cylindrical Adapter (42)
Insert Shape
Insert Shape
- COUNTERBORE/COUNTERSINK MISC (118)
- KENTIP DRILL (17)
- KENTIP FUSION DRILL (3)
Front End Style
Front End Style
- ZYL01 Straight Shank (42)
Gage Length
Gage Length
- 70.0000 mm(2)
- 75.0000 mm(5)
- 77.0000 mm(2)
- 80.0000 mm(2)
- 85.0000 mm(1)
- 90.0000 mm(5)
- 95.0000 mm(2)
- 95.2500 mm(2)
- 100.0000 mm(1)
- 150.0000 mm(7)
- 152.4000 mm(2)
- 170.0000 mm(7)
- 200.0000 mm(4)
Point Angle
Point Angle
- 90.0 (5)
- 120.0 (5)
- 128.0 (10)
- 135.0 (99)
- 140.0 (12)
- 180.0 (6)
to
Front End Size
Front End Size
- 12.0 mm(41)
- 12.7 mm(1)
to
Insert Geometry
Shape
Shape
- COUNTERBORE/COUNTERSINK MISC (34)
Cutting Tool Material
Cutting Tool Material
- D P (2)
- H W (32)
Back-End
Connection Type
Connection Type
- CYLINDRICAL (215)
System Size
System Size
- BT30 (1)
- BT40 (2)
- BT50 (2)
- CV40 (3)
- CV50 (3)
- DV40 (2)
- DV50 (2)
- HSK100A (3)
- HSK32C (1)
- HSK40A (2)
- HSK40C (1)
- HSK50A (1)
- HSK50C (1)
- HSK63A (3)
- HSK63C (1)
- HSK80A (1)
- KM40TS (1)
- KM4X100 (1)
- KM4X63 (3)
- KM50TS (1)
- KM63TS (2)
- KM63XMZ (1)
- PSC50 (1)
- PSC63 (1)
Back-End Diameter
Back-End Diameter
- 4.0 mm(7)
- 5.0 mm(8)
- 6.0 mm(18)
- 7.0 mm(12)
- 8.0 mm(17)
- 9.0 mm(13)
- 10.0 mm(11)
- 11.0 mm(11)
- 12.0 mm(12)
- 13.0 mm(6)
- 14.0 mm(4)
- 15.0 mm(6)
- 16.0 mm(5)
- 17.0 mm(2)
- 18.0 mm(2)
- 19.05 mm(12)
- 20.0 mm(20)
- 25.4 mm(9)
- 25.7 mm(1)
- 27.7 mm(1)
- 29.7 mm(1)
- 31.6 mm(1)
- 31.75 mm(12)
- 32.0 mm(22)
- 33.6 mm(1)
- 37.6 mm(1)
- 38.1 mm(2)
- 39.6 mm(1)
- 40.0 mm(4)
- 41.6 mm(1)
- 44.45 mm(7)
- 50.0 mm(4)
- 63.0 mm(11)
- 69.85 mm(7)
- 80.0 mm(1)
- 100.0 mm(4)
to
No filters matching ""
