Flush Shank Turning Holders • No Offset
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (648)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(648)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(648)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(648)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(648)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(648)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(648)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(648)
- M Stainless Steel (648)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(648)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(648)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(648)
- K Cast Iron (646)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(646)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(646)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(646)
- N Non-Ferrous Materials (590)
- N1Wrought Aluminum (585)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(585)
- N3High-Silicon Aluminum Alloys Si >12.2%(361)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (590)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (585)
- N6Carbon, Graphite Composites, CFRP (579)
- N7MMC's (539)
- S High-Temp Alloys (640)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(640)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(640)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(640)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(640)
- H Hardened Materials (508)
- H1Hardened Materials 44-48 HRC(508)
- H2Hardened Materials 48-55 HRC(508)
- H3Hardened Materials 56-60 HRC(508)
- H4Hardened Materials >60 HRC(416)
Select First Choice
- CN (62)
- DE (60)
- GB (39)
- IN (2)
- SG (10)
- US (77)
Applications
Applications
Chamfer Turning (8)
Facing (369)
ID Facing (2)
Multiple Direction Cutting (491)
Plunge Turning (10)
Profiling (505)
Turning (637)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (643)
- Lightly Interrupted Cut (648)
- Smooth Cut (648)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (64)
- 50.0 (20)
- 60.0 (4)
- 62.5 (15)
- 72.5 (14)
- 75.0 (66)
- 90.0 (124)
- 93.0 (179)
- 95.0 (136)
- 107.5 (28)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (20)
- 1.0 (431)
- 2.0 (433)
- 3.0 (78)
- 4.0 (393)
- 6.0 (58)
- 8.0 (167)
to
Over All Length [L]
Over All Length [L]
- 63.5 mm(22)
- 82.55 mm(1)
- 88.9 mm(32)
- 100.0 mm(39)
- 101.6 mm(28)
- 114.295 mm(1)
- 114.3 mm(77)
- 125.0 mm(52)
- 127.0 mm(28)
- 150.0 mm(76)
- 152.4 mm(216)
- 160.0 mm(21)
- 170.0 mm(25)
- 171.25 mm(4)
- 172.5 mm(2)
- 177.8 mm(19)
- 200.0 mm(3)
- 203.2 mm(3)
- 457.2 mm(1)
to
Corner Radius
Corner Radius
- 0.0 mm(171)
- 0.025 mm(171)
- 0.05 mm(199)
- 0.075 mm(42)
- 0.1 mm(361)
- 0.2 mm(400)
- 0.35 mm(7)
- 0.4 mm(514)
- 0.6 mm(8)
- 0.8 mm(587)
- 1.2 mm(455)
- 1.6 mm(275)
- 2.375 mm(31)
- 2.4 mm(94)
- 3.0 mm(1)
- 3.175 mm(26)
- 3.2 mm(20)
- 4.0 mm(21)
- 4.775 mm(13)
- 5.0 mm(7)
- 6.0 mm(4)
- 6.35 mm(6)
- 8.0 mm(1)
to
Application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K060 (55)
- K090 (52)
- K1 (15)
- K313 (546)
- K68 (358)
- KB1340 (88)
- KB1345 (190)
- KB1610 (239)
- KB1630 (184)
- KB5610 (197)
- KB5630 (266)
- KBH10 (361)
- KBH10B (395)
- KBH20 (398)
- KBH20B (392)
- KC5010 (638)
- KC5020P (39)
- KC5025 (557)
- KC5410 (494)
- KC730 (565)
- KC850 (612)
- KC9125 (18)
- KCK05 (448)
- KCK05B (207)
- KCK15 (463)
- KCK15B (465)
- KCK20 (512)
- KCK20B (500)
- KCM15 (440)
- KCM15B (463)
- KCM25 (561)
- KCM25B (552)
- KCM25S (132)
- KCM35 (465)
- KCM35B (190)
- KCP05 (386)
- KCP05B (247)
- KCP10 (579)
- KCP10B (592)
- KCP10C (103)
- KCP15 (28)
- KCP20S (132)
- KCP25 (594)
- KCP25B (580)
- KCP25C (642)
- KCP30 (540)
- KCP30B (253)
- KCP40 (246)
- KCP40B (290)
- KCPK05 (259)
- KCS10 (375)
- KCS10B (562)
- KCS25S (132)
- KCU10 (616)
- KCU10B (635)
- KCU25 (567)
- KCU25B (586)
- KD1400 (366)
- KD1405 (142)
- KD1425 (361)
- KN10S (171)
- KS15 (55)
- KT315 (453)
- KT325 (290)
- KTP10 (427)
- KTP25S (367)
- KY1540 (55)
- KY1615 (8)
- KY3500 (230)
- KY4300 (135)
- KY4400 (192)
- KYHK15B (230)
- KYK10 (116)
- KYK25 (184)
- KYS25 (75)
- KYS30 (104)
- SP4019 (126)
- THM (6)
- X00580 (55)
- X00581 (55)
- X00582 (55)
- X00583 (55)
- X00584 (55)
- X00585 (55)
- X00586 (55)
- X00591 (55)
- X00592 (55)
- X00593 (55)
- X00594 (55)
- X00596 (55)
- X00597 (55)
- X00599 (55)
Hand Of Tool
Hand Of Tool
- L (260)
- N (89)
- R (301)
Wiper Insert
Wiper Insert
- N (648)
- Y (179)
F Dimension
F Dimension
- 4.762 mm(3)
- 5.0 mm(1)
- 6.0 mm(5)
- 6.35 mm(6)
- 7.925 mm(1)
- 7.938 mm(1)
- 7.94 mm(1)
- 8.0 mm(6)
- 9.52 mm(14)
- 9.525 mm(8)
- 10.0 mm(13)
- 11.0 mm(1)
- 11.12 mm(1)
- 11.15 mm(2)
- 12.0 mm(20)
- 12.25 mm(1)
- 12.5 mm(5)
- 12.7 mm(53)
- 13.0 mm(4)
- 13.64 mm(2)
- 13.92 mm(1)
- 13.95 mm(1)
- 14.0 mm(1)
- 14.275 mm(1)
- 15.0 mm(1)
- 15.799 mm(1)
- 15.87 mm(1)
- 15.875 mm(14)
- 15.88 mm(25)
- 16.0 mm(27)
- 16.5 mm(1)
- 16.82 mm(1)
- 17.02 mm(2)
- 17.09 mm(1)
- 17.475 mm(1)
- 17.5 mm(1)
- 18.5 mm(1)
- 18.95 mm(2)
- 19.05 mm(21)
- 19.075 mm(2)
- 20.0 mm(31)
- 20.5 mm(2)
- 20.638 mm(1)
- 21.031 mm(2)
- 21.08 mm(2)
- 22.0 mm(1)
- 22.225 mm(4)
- 22.352 mm(2)
- 23.165 mm(5)
- 24.26 mm(2)
- 25.0 mm(31)
- 25.197 mm(2)
- 25.4 mm(53)
- 25.5 mm(1)
- 25.908 mm(4)
- 25.91 mm(1)
- 27.381 mm(2)
- 28.016 mm(2)
- 28.7 mm(2)
- 31.75 mm(83)
- 31.775 mm(6)
- 32.0 mm(54)
- 32.258 mm(4)
- 32.26 mm(2)
- 33.55 mm(2)
- 34.366 mm(2)
- 35.006 mm(1)
- 38.1 mm(38)
- 38.125 mm(3)
- 38.379 mm(2)
- 38.608 mm(2)
- 40.0 mm(6)
- 40.5 mm(6)
- 44.958 mm(1)
- 46.25 mm(3)
- 50.0 mm(2)
- 50.8 mm(25)
- 50.826 mm(1)
- 57.658 mm(1)
- 63.5 mm(2)
to
Cutting Direction
Cutting Direction
- B (151)
- E (60)
- S (439)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (262)
- DOUBLE POSITIVE (18)
- NEGATIVE-ZERO (47)
- NEUTRAL (ZERO) (312)
- POSITIVE-ZERO (11)
Front-End
Clamp Style
Clamp Style
- M (309)
- S (341)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (221)
- D-DIAMOND/RHOMBIC 55 (127)
- R-ROUND (52)
- S-SQUARE 90 (65)
- T-TRIANGLE 60 (77)
- V-DIAMOND/RHOMBIC 35 (93)
- W-TRIGON 80 (15)
Maximum Cutting Depth
Maximum Cutting Depth
- 7.0 mm(2)
- 7.85 mm(2)
- 10.16 mm(2)
- 10.414 mm(1)
- 10.922 mm(2)
- 11.8 mm(2)
- 12.0 mm(1)
- 12.13 mm(2)
- 12.72 mm(2)
- 15.88 mm(1)
- 16.0 mm(3)
- 19.05 mm(2)
- 20.0 mm(3)
- 20.574 mm(3)
- 25.0 mm(4)
- 25.4 mm(15)
- 25.908 mm(4)
- 31.75 mm(1)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (364)
- B L (398)
- C A (248)
- C N (230)
- D P (381)
- H T (453)
- H W (648)
Back-End
Shank Height
Shank Height
- 7.938 mm(2)
- 8.0 mm(1)
- 9.52 mm(22)
- 9.525 mm(12)
- 10.0 mm(10)
- 12.0 mm(34)
- 12.7 mm(64)
- 15.875 mm(8)
- 15.88 mm(28)
- 16.0 mm(47)
- 19.05 mm(65)
- 20.0 mm(43)
- 25.0 mm(53)
- 25.4 mm(114)
- 31.75 mm(72)
- 32.0 mm(31)
- 38.1 mm(38)
- 40.0 mm(3)
- 50.8 mm(3)
to
Shank Width
Shank Width
- 7.938 mm(2)
- 8.0 mm(1)
- 9.52 mm(21)
- 9.525 mm(13)
- 10.0 mm(10)
- 12.0 mm(34)
- 12.7 mm(63)
- 15.875 mm(10)
- 15.88 mm(27)
- 16.0 mm(47)
- 19.05 mm(65)
- 20.0 mm(43)
- 25.0 mm(69)
- 25.4 mm(121)
- 31.75 mm(65)
- 32.0 mm(15)
- 38.1 mm(38)
- 40.0 mm(3)
- 50.8 mm(3)
to
No filters matching ""
