successfully added to cart
View Cart
High-Feed Milling Cutters
High-Feed Milling Cutters
High-Feed Milling Cutters
High-Feed Milling Cutters

7792VXD09 Cylindrical Shank • Inch

High-Feed Milling Cutters

Features and benefits

  • Superior surface generation with integrated wiper facet.

  • Maximum material removal rates.

  • Suitable to machine HTA and titanium.

  • Ultra-fine pitch cutters available to increase material removal rates, especially on high-temp alloys.

  • Positive design to support lower cutting forces and long overhang usage.

  • Ramping and plunge milling capabilities.

Uses and application

  • フェイスミーリングフェイスミーリング
  • ランピング加工:ブランクランピング加工:ブランク
  • ヘリカルミーリングヘリカルミーリング
  • ポケット溝加工ポケット溝加工
  • プランジミーリング:ボールノーズプランジミーリング:ボールノーズ
  • カウンタボーリングカウンタボーリング
  • Slotting: ShoulderSlotting: Shoulder
  • Spiral CircularSpiral Circular
  • Inclined Square End MillInclined Square End Mill
  • ミーリング — スルークーラントミーリング — スルークーラント
  • シャンク — ストレート プレーンシャンク — ストレート プレーン

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (4)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (4)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (4)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (4)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (4)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (4)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (4)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (4)
  • M Stainless Steel (4)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (4)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (4)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (4)
  • K Cast Iron (4)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (4)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (4)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (4)
  • N Non-Ferrous Materials (4)
    • N1
      Wrought Aluminum
      (4)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (4)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (4)
  • S High-Temp Alloys (4)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (4)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (4)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (4)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (4)
  • H Hardened Materials (4)
    • H1
      Hardened Materials 44-48 HRC
      (4)
    • H2
      Hardened Materials 48-55 HRC
      (4)
Select First Choice
  • US (4)
Applications
  • Face Milling Face Milling (4)
  • Pocket Pocket (4)
  • Pocket Helical Pocket Helical (4)
  • Pocket Milling Pocket Milling (4)
  • Pocket Plunge Milling Pocket Plunge Milling (2)
  • Profile Milling Profile Milling (4)
  • Ramping Ramping (4)
Cutting Diameter
  • 12.379 (1)
  • 17.206 (1)
  • 18.714 (1)
  • 18.728 (1)
to
Cutting Diameter
  • 0.4874 (1)
  • 0.6774 (1)
  • 0.7368 (1)
  • 0.7373 (1)
to
Maximum Cutting Diameter
  • 1.0 (2)
  • 1.2421 (1)
  • 1.2506 (1)
to
Maximum Cutting Diameter
  • 25.4 (2)
  • 31.55 (1)
  • 31.764 (1)
to
Reach
  • 50.0 (1)
  • 50.8 (1)
  • 70.0 (1)
  • 76.2 (1)
to
Reach
  • 1.9685 (1)
  • 2.0 (1)
  • 2.7559 (1)
  • 3.0 (1)
to
cornerConfiguration
Corner Radius
  • 0.798 (4)
  • 0.8 (4)
  • 1.194 (4)
  • 1.2 (4)
to
Corner Radius
  • 0.031 (4)
  • 0.0314 (4)
  • 0.0315 (4)
  • 0.047 (4)
to
application
Grade Of Cutting Tool
  • GH2 (4)
  • KC510M (4)
  • KC522M (4)
  • KC725M (4)
  • KCK15 (4)
  • KCPK30 (4)
  • KCPM40 (4)
  • KCSM40 (4)
  • SC3025 (4)
  • SC6525 (4)
  • SP2019 (4)
  • SP4019 (4)
  • SP4659 (4)
  • SP6519 (4)
  • X400 (4)
  • X500 (4)
  • X700 (4)
Maximum Ramp Angle
  • 1.5 (2)
  • 2.7 (2)
to
frontEnd
Neck Diameter
  • 22.5 (1)
  • 23.38 (1)
  • 29.0 (1)
  • 29.74 (1)
to
Neck Diameter
  • 0.886 (1)
  • 0.921 (1)
  • 1.142 (1)
  • 1.171 (1)
to
backEnd
Back-End Diameter
  • 1.0 (2)
  • 1.25 (2)
to
Back-End Diameter
  • 25.4 (2)
  • 31.75 (2)
to
other
Number of Inserts
  • 2.0 (1)
  • 3.0 (2)
  • 4.0 (1)
to
Over All Length [L]
  • 200.0 (1)
  • 203.2 (1)
  • 250.0 (1)
  • 254.0 (1)
to
Over All Length [L]
  • 7.874 (1)
  • 8.0 (1)
  • 9.8425 (1)
  • 10.0 (1)
to
Head Length [L2]
  • 50.0 (1)
  • 50.8 (1)
  • 70.0 (1)
  • 76.2 (1)
to
Head Length [L2]
  • 1.9685 (1)
  • 2.0 (1)
  • 2.7559 (1)
  • 3.0 (1)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
  • High-Feed Series
Displaying 1- 4 of 4 results
Select Columns
Select Filters
Metric
Inch
Show
    • Applied Filters:
    • Clear all filters
  • X First Choice:
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [Z] Number of Flutes
5659948 C7792VXD09CA1.25Z3R3 C7792VXD09CA1.25Z3R3   31.5500 1.242 31.75 1.25 250.0000 9.842 70.0000 2.755 1.5000 .0591 3
    List price:
    $546.04 /each.
    Your price::
    Qty
    5667564 C7792VXD09CA1.00Z2R2 C7792VXD09CA1.00Z2R2   25.4000 1.000 25.4 1.0 200.0000 7.874 50.0000 1.968 1.5000 .0591 2
      List price:
      $502.36 /each.
      Your price::
      Qty
      6025590 C7792VXD09CA1.00Z3R2 C7792VXD09CA1.00Z3R2   25.4000 1.000 25.4 1.0 203.2000 8.000 50.8000 2.000 1.5000 .0591 3
        List price:
        $526.68 /each.
        Your price::
        Qty
        6025611 C7792VXD09CA1.25Z4R3 C7792VXD09CA1.25Z4R3   31.7640 1.250 31.75 1.25 254.0000 10.000 76.2000 3.000 1.5000 .0591 4
          List price:
          $570.05 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty

          Sold in pkg. of

          product-image
          Please adjust the following properties from

          ISO カタログ

          ANSI カタログ

          to find similar products.
          If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
          You are about to create a duplicate . Do you want to proceed?
          You are about to delete Do you want to proceed?
          What would you like to rename your to?
          Please enter a valid name
          Please enter a name for the duplicate
          Please enter a valid name
          You are about to add to your My Solutions page. Do you want to proceed?
          Please enter a valid name
          Send a copy of

          Please enter a valid Email
          Please enter a valid name

          We have found the following CAD Drawings

          Select the files you are looking for and download them all at once

          You should be logged to see your dashboard information
          The product/s () you were trying to add to the cart is/are not available, please contact customer service.
          item(s) successfully added to the cart
          View Cart