Suggestions

Product Suggestions

Product Categories

Resources

オンラインでご注文
successfully added to cart
View Cart
EXIT SEARCH
Back to Solution
Contact us
TOP NOTCHねじ切りボーリングバー
TOP NOTCHねじ切りボーリングバー
TOP NOTCHねじ切りボーリングバー
TOP NOTCHねじ切りボーリングバー

A-NE

TOP NOTCHねじ切りボーリングバー

Uses and application

  • I.D. Internal ThreadingI.D. Internal Threading
  • I.D. TurningI.D. Turning
  • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
  • I.D. GroovingI.D. Grooving

Workpiece Materials

P
M
K
N
S
H
TOP NOTCHねじ切りボーリングバー
Filters and Columns
Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (31)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (31)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (31)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (31)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (31)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (31)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (31)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (31)
  • M Stainless Steel (31)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (31)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (31)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (31)
  • K Cast Iron (31)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (31)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (31)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (31)
  • N Non-Ferrous Materials (31)
    • N1
      Wrought Aluminum
      (31)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (31)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (30)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (31)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (31)
    • N6
      Carbon, Graphite Composites, CFRP
      (31)
    • N7
      MMC's
      (30)
  • S High-Temp Alloys (31)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (31)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (31)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (31)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (31)
  • H Hardened Materials (30)
    • H1
      Hardened Materials 44-48 HRC
      (30)
    • H2
      Hardened Materials 48-55 HRC
      (27)
    • H3
      Hardened Materials 56-60 HRC
      (19)
    • H4
      Hardened Materials >60 HRC
      (19)
Applications
  • Cut-Off Cut-Off (29)
  • Deep Grooving Deep Grooving (29)
  • Face Grooving Face Grooving (29)
  • Grooving Grooving (29)
  • ID Facing ID Facing (29)
  • ID Grooving ID Grooving (29)
  • ID Thread Turning ID Thread Turning (29)
  • Multiple Direction Cutting Multiple Direction Cutting (29)
  • OD Thread Turning OD Thread Turning (29)
  • Profiling Profiling (29)
  • TRN Boring TRN Boring (29)
  • Threading Threading (29)
  • Turning Turning (29)
Type of Thread
  • 60 (27)
  • ACME (22)
  • API (19)
  • API RD (15)
  • BSW (12)
  • BUTTRESS (27)
  • M (16)
  • NPT (12)
  • STUB ACME (12)
  • UN (27)
  • UNJ (12)
Cutting Condition
  • Heavily Interrupted Cut (31)
  • Lightly Interrupted Cut (31)
  • Smooth Cut (31)
  • Varying Depth of Cut (31)
Tool Cutting Edge Angle
  • 90.0 (31)
to
Cutting Edges Per Insert
  • 1.0 (27)
  • 2.0 (31)
to
cornerConfiguration
Corner Radius
  • 0.026 (6)
  • 0.051 (6)
  • 0.057 (6)
  • 0.066 (12)
  • 0.076 (27)
  • 0.08 (20)
  • 0.089 (14)
  • 0.09 (14)
  • 0.094 (12)
  • 0.097 (6)
  • 0.1 (20)
  • 0.102 (20)
  • 0.116 (6)
  • 0.117 (6)
  • 0.127 (12)
  • 0.131 (12)
  • 0.132 (12)
  • 0.133 (12)
  • 0.15 (12)
  • 0.155 (12)
  • 0.157 (12)
  • 0.16 (7)
  • 0.165 (19)
  • 0.173 (12)
  • 0.178 (12)
  • 0.18 (4)
  • 0.185 (4)
  • 0.19 (27)
  • 0.191 (27)
  • 0.198 (12)
  • 0.2 (12)
  • 0.202 (16)
  • 0.224 (12)
  • 0.235 (12)
  • 0.244 (6)
  • 0.25 (12)
  • 0.251 (12)
  • 0.254 (19)
  • 0.255 (6)
  • 0.269 (12)
  • 0.282 (12)
  • 0.284 (12)
  • 0.3 (12)
  • 0.315 (16)
  • 0.318 (20)
  • 0.33 (12)
  • 0.34 (12)
  • 0.343 (17)
  • 0.356 (12)
  • 0.404 (12)
  • 0.406 (15)
  • 0.43 (12)
  • 0.445 (19)
  • 0.472 (6)
  • 0.49 (12)
  • 0.5 (8)
  • 0.508 (12)
  • 0.565 (4)
  • 0.57 (6)
  • 0.572 (20)
  • 0.575 (13)
  • 0.75 (8)
  • 0.787 (20)
  • 0.826 (4)
  • 0.902 (19)
  • 1.0 (20)
  • 1.194 (20)
  • 1.195 (6)
  • 1.25 (20)
  • 1.5 (20)
  • 1.585 (12)
  • 1.588 (27)
  • 1.59 (4)
  • 1.75 (20)
  • 1.98 (6)
  • 1.981 (12)
  • 2.0 (19)
  • 2.25 (19)
  • 2.388 (19)
  • 2.39 (3)
  • 2.5 (7)
  • 3.175 (7)
  • 3.18 (4)
to
Corner Radius
  • 0.002 (6)
  • 0.0023 (6)
  • 0.0026 (12)
  • 0.003 (27)
  • 0.0031 (20)
  • 0.0035 (14)
  • 0.0037 (12)
  • 0.0038 (6)
  • 0.004 (20)
  • 0.0046 (12)
  • 0.005 (12)
  • 0.0052 (12)
  • 0.0053 (12)
  • 0.0059 (12)
  • 0.006 (12)
  • 0.0062 (12)
  • 0.0065 (19)
  • 0.0068 (12)
  • 0.007 (12)
  • 0.0075 (27)
  • 0.0078 (12)
  • 0.0079 (6)
  • 0.008 (16)
  • 0.0088 (12)
  • 0.0093 (12)
  • 0.0096 (6)
  • 0.0099 (12)
  • 0.01 (19)
  • 0.0106 (12)
  • 0.0111 (12)
  • 0.0112 (12)
  • 0.0118 (12)
  • 0.0124 (12)
  • 0.0125 (20)
  • 0.013 (12)
  • 0.0135 (23)
  • 0.014 (12)
  • 0.0159 (12)
  • 0.016 (15)
  • 0.017 (12)
  • 0.0175 (19)
  • 0.0186 (6)
  • 0.0193 (12)
  • 0.0197 (8)
  • 0.02 (12)
  • 0.0225 (20)
  • 0.0295 (8)
  • 0.031 (20)
  • 0.0325 (4)
  • 0.0355 (19)
  • 0.0394 (20)
  • 0.047 (20)
  • 0.0492 (20)
  • 0.0591 (20)
  • 0.0625 (27)
  • 0.0689 (20)
  • 0.078 (12)
  • 0.0787 (19)
  • 0.0886 (19)
  • 0.094 (19)
  • 0.0984 (7)
  • 0.106 (6)
  • 0.125 (7)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (20)
  • K313 (27)
  • K420 (31)
  • K4H (16)
  • K68 (31)
  • KB1345 (19)
  • KB1630 (19)
  • KB5625 (12)
  • KC250 (20)
  • KC5010 (30)
  • KC5025 (31)
  • KC5410 (27)
  • KC710 (27)
  • KC720 (27)
  • KC722 (27)
  • KC730 (30)
  • KC732 (12)
  • KC810 (31)
  • KC850 (31)
  • KC910 (16)
  • KC9110 (27)
  • KC9120 (12)
  • KC9320 (27)
  • KC935 (27)
  • KC950 (27)
  • KCK20 (23)
  • KCK20B (27)
  • KCP10B (27)
  • KCP25B (27)
  • KCU10 (30)
  • KCU25 (31)
  • KD050 (6)
  • KD081 (12)
  • KD100 (16)
  • KD120 (19)
  • KD1425 (12)
  • KT175 (20)
  • KT315 (27)
  • KU10T (27)
  • KU25T (27)
  • KU30T (27)
  • KY3000 (19)
Wiper Insert
  • N (31)
Minimum Axial Groove Diameter
  • 0.73 (2)
  • 1.0 (2)
  • 1.125 (2)
  • 1.375 (4)
  • 1.75 (2)
  • 2.0 (2)
  • 2.25 (2)
  • 2.5 (4)
  • 2.75 (4)
  • 2.812 (1)
  • 3.0 (3)
  • 3.25 (3)
to
Minimum Axial Groove Diameter
  • 18.542 (2)
  • 25.4 (2)
  • 28.575 (1)
  • 28.58 (1)
  • 34.92 (2)
  • 34.925 (2)
  • 44.45 (2)
  • 50.8 (2)
  • 57.15 (2)
  • 63.5 (4)
  • 69.85 (4)
  • 71.425 (1)
  • 76.2 (3)
  • 82.55 (3)
to
Maximum Axial Groove Diameter
  • 9999.0 (30)
to
Maximum Axial Groove Diameter
  • 393.661 (30)
to
Maximum Bore Depth
  • 50.8 (2)
  • 63.5 (2)
  • 76.2 (2)
  • 101.6 (4)
  • 127.0 (2)
  • 152.4 (2)
  • 177.8 (4)
  • 203.2 (7)
  • 228.6 (1)
  • 254.0 (5)
to
Maximum Bore Depth
  • 2.0 (2)
  • 2.5 (2)
  • 3.0 (2)
  • 4.0 (4)
  • 5.0 (2)
  • 6.0 (2)
  • 7.0 (4)
  • 8.0 (7)
  • 9.0 (1)
  • 10.0 (5)
to
frontEnd
Clamp Style
  • N (31)
Insert Shape
  • TN-TOP NOTCH (31)
Cutting Width
  • 0.5 (8)
  • 0.787 (8)
  • 0.8 (8)
  • 0.889 (8)
  • 0.991 (8)
  • 1.0 (20)
  • 1.041 (8)
  • 1.19 (14)
  • 1.194 (20)
  • 1.199 (4)
  • 1.2 (20)
  • 1.39 (8)
  • 1.397 (8)
  • 1.4 (8)
  • 1.473 (8)
  • 1.5 (20)
  • 1.56 (4)
  • 1.57 (16)
  • 1.575 (20)
  • 1.69 (8)
  • 1.7 (8)
  • 1.702 (8)
  • 1.75 (20)
  • 1.829 (12)
  • 1.94 (8)
  • 1.95 (8)
  • 1.956 (8)
  • 1.981 (12)
  • 2.0 (20)
  • 2.007 (8)
  • 2.2 (20)
  • 2.235 (20)
  • 2.24 (14)
  • 2.25 (14)
  • 2.388 (20)
  • 2.39 (6)
  • 2.464 (12)
  • 2.5 (20)
  • 2.667 (12)
  • 2.74 (8)
  • 2.743 (20)
  • 2.75 (20)
  • 2.794 (12)
  • 2.997 (20)
  • 3.0 (27)
  • 3.099 (12)
  • 3.17 (12)
  • 3.175 (27)
  • 3.18 (8)
  • 3.2 (27)
  • 3.245 (8)
  • 3.25 (12)
  • 3.251 (20)
  • 3.27 (8)
  • 3.32 (6)
  • 3.329 (6)
  • 3.5 (27)
  • 3.607 (12)
  • 3.73 (4)
  • 3.81 (8)
  • 3.84 (8)
  • 3.96 (12)
  • 3.962 (12)
  • 3.974 (6)
  • 3.988 (12)
  • 4.0 (19)
  • 4.24 (6)
  • 4.242 (19)
  • 4.25 (6)
  • 4.3 (12)
  • 4.5 (19)
  • 4.521 (12)
  • 4.699 (15)
  • 4.775 (19)
  • 4.78 (3)
  • 4.785 (3)
  • 4.788 (4)
  • 4.8 (12)
  • 4.801 (19)
  • 4.81 (12)
  • 4.88 (6)
  • 4.95 (12)
  • 5.0 (7)
  • 5.004 (8)
  • 5.131 (7)
  • 5.41 (7)
  • 5.5 (7)
  • 5.537 (3)
  • 5.563 (7)
  • 6.0 (8)
  • 6.35 (11)
  • 6.36 (4)
  • 6.48 (7)
  • 7.01 (1)
  • 7.137 (4)
  • 7.925 (4)
  • 8.001 (1)
  • 8.738 (1)
  • 8.992 (1)
  • 9.525 (4)
  • 9.65 (1)
  • 9.73 (3)
to
Cutting Width
  • 0.0197 (8)
  • 0.031 (8)
  • 0.0315 (8)
  • 0.035 (8)
  • 0.039 (8)
  • 0.0394 (20)
  • 0.041 (8)
  • 0.047 (20)
  • 0.0472 (20)
  • 0.055 (8)
  • 0.0551 (8)
  • 0.058 (8)
  • 0.0591 (20)
  • 0.062 (20)
  • 0.0669 (8)
  • 0.067 (8)
  • 0.0689 (20)
  • 0.072 (12)
  • 0.076 (8)
  • 0.0768 (8)
  • 0.077 (8)
  • 0.078 (12)
  • 0.0787 (20)
  • 0.079 (14)
  • 0.0866 (20)
  • 0.088 (20)
  • 0.0886 (14)
  • 0.094 (20)
  • 0.097 (12)
  • 0.0984 (20)
  • 0.105 (12)
  • 0.108 (20)
  • 0.1083 (20)
  • 0.11 (12)
  • 0.118 (20)
  • 0.1181 (27)
  • 0.122 (12)
  • 0.125 (27)
  • 0.126 (27)
  • 0.1278 (8)
  • 0.128 (20)
  • 0.129 (8)
  • 0.131 (6)
  • 0.1378 (27)
  • 0.142 (12)
  • 0.147 (4)
  • 0.15 (8)
  • 0.151 (8)
  • 0.156 (12)
  • 0.157 (12)
  • 0.1574 (19)
  • 0.1575 (19)
  • 0.167 (19)
  • 0.1673 (6)
  • 0.169 (12)
  • 0.1771 (19)
  • 0.1772 (19)
  • 0.178 (12)
  • 0.185 (15)
  • 0.188 (19)
  • 0.189 (19)
  • 0.192 (6)
  • 0.195 (12)
  • 0.1969 (7)
  • 0.197 (8)
  • 0.202 (7)
  • 0.213 (7)
  • 0.2165 (7)
  • 0.2166 (4)
  • 0.218 (3)
  • 0.219 (7)
  • 0.2362 (8)
  • 0.25 (11)
  • 0.255 (7)
  • 0.276 (1)
  • 0.281 (4)
  • 0.312 (4)
  • 0.315 (1)
  • 0.344 (1)
  • 0.354 (1)
  • 0.375 (4)
  • 0.38 (1)
  • 0.383 (3)
to
Insert Size
  • 2 (8)
  • 3 (12)
  • 4 (7)
  • 5 (1)
  • 6 (3)
insertGeometry
Cutting Tool Material
  • B H (19)
  • B L (12)
  • C N (19)
  • D P (16)
  • H T (27)
  • H W (31)
backEnd
Back-End Diameter
  • 0.5 (2)
  • 0.625 (2)
  • 0.75 (2)
  • 1.0 (4)
  • 1.25 (2)
  • 1.5 (2)
  • 1.75 (4)
  • 2.0 (7)
  • 2.25 (1)
  • 2.5 (5)
to
Back-End Diameter
  • 12.7 (2)
  • 15.875 (2)
  • 19.05 (2)
  • 25.4 (4)
  • 31.75 (2)
  • 38.1 (2)
  • 44.45 (4)
  • 50.8 (7)
  • 57.15 (1)
  • 63.5 (5)
to
other
Platform
  • Top Notch (28)
Tool Unit
  • I (31)
Over All Length [L]
  • 203.2 (2)
  • 254.0 (4)
  • 304.8 (4)
  • 355.6 (8)
  • 406.4 (13)
to
Over All Length [L]
  • 8.0 (2)
  • 10.0 (4)
  • 12.0 (4)
  • 14.0 (8)
  • 16.0 (13)
to
Insert Hand
  • L (15)
  • R (16)
Cutting Condition Material
  • H-All (31)
  • K-All (31)
  • M-All (31)
  • N-All (31)
  • P-All (31)
  • S-All (31)
Maximum Depth of Cut
Maximum Depth of Cut
Category Path
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 31 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [CS] Coolant Supply Size Gage Insert Clamp Screw ID Drive Size
1094825 A08NEL2 A08NEL2 18.5420 .7300 12.7 .5 203.2000 8.000 11.1000 .4370 1/16-27 NPT N.2R 7/64
    1094824 A08NER2 A08NER2 18.5420 .7300 12.7 .5 203.2000 8.000 11.1000 .4370 1/16-27 NPT N.2L 7/64
      1094830 A10SNEL2 A10SNEL2 25.4000 1.000 15.875 .625 254.0000 10.000 12.7000 .5000 1/8-27 NPT N.2R 7/64
        1094829 A10SNER2 A10SNER2 25.4000 1.000 15.875 .625 254.0000 10.000 12.7000 .5000 1/8-27 NPT N.2L 7/64
          1094832 A12SNEL2 A12SNEL2 28.5750 1.125 19.05 .75 254.0000 10.000 14.2750 .5620 1/8-27 NPT N.2R 7/64
            1094831 A12SNER2 A12SNER2 28.5800 1.125 19.05 .75 254.0000 10.000 14.2700 .5620 1/8-27 NPT N.2L 7/64
              1094836 A16NEL3 A16NEL3 34.9250 1.375 25.4 1.0 304.8000 12.000 17.4750 .6880 1/4-18 NPT N.3R 25 IP
                1094835 A16NER3 A16NER3 34.9250 1.375 25.4 1.0 304.8000 12.000 17.4750 .6880 1/4-18 NPT N.3L 25 IP
                  1094834 A16TNEL2 A16TNEL2 34.9200 1.375 25.4 1.0 304.8000 12.000 17.4800 .6880 1/4-18 NPT N.2R 7/64
                    1094833 A16TNER2 A16TNER2 34.9200 1.375 25.4 1.0 304.8000 12.000 17.4800 .6880 1/4-18 NPT N.2L 7/64
                      1094838 A20NEL3 A20NEL3 44.4500 1.750 31.75 1.25 355.6000 14.000 22.2250 .8750 1/4-18 NPT N.3R 25 IP
                        1094837 A20NER3 A20NER3 44.4500 1.750 31.75 1.25 355.6000 14.000 22.2250 .8750 1/4-18 NPT N.3L 25 IP
                          1094840 A24NEL3 A24NEL3 50.8000 2.000 38.1 1.5 355.6000 14.000 25.4000 1.000 1/4-18 NPT N.3R 25 IP
                            1094839 A24NER3 A24NER3 50.8000 2.000 38.1 1.5 355.6000 14.000 25.4000 1.000 1/4-18 NPT N.3L 25 IP
                              1094842 A28NEL3 A28NEL3 57.1500 2.250 44.45 1.75 355.6000 14.000 28.5750 1.125 1/4-18 NPT N.3R 25 IP
                                1094848 A28NEL4 A28NEL4 63.5000 2.500 44.45 1.75 355.6000 14.000 31.7500 1.250 1/4-18 NPT N.4R 25 IP
                                  1094841 A28NER3 A28NER3 57.1500 2.250 44.45 1.75 355.6000 14.000 28.5750 1.125 1/4-18 NPT N.3L 25 IP
                                    1094847 A28NER4 A28NER4 63.5000 2.500 44.45 1.75 355.6000 14.000 31.7500 1.250 1/4-18 NPT N.4L 25 IP
                                      1094844 A32NEL3 A32NEL3 63.5000 2.500 50.8 2.0 406.4000 16.000 31.7500 1.250 1/4-18 NPT N.3R 25 IP
                                        1094850 A32NEL4 A32NEL4 69.8500 2.750 50.8 2.0 406.4000 16.000 34.9250 1.375 1/4-18 NPT N.4R 25 IP
                                          1094860 A32NEL6 A32NEL6 69.8500 2.750 50.8 2.0 406.4000 16.000 34.9250 1.375 1/4-18 NPT N.6R 5/32
                                            1094843 A32NER3 A32NER3 63.5000 2.500 50.8 2.0 406.4000 16.000 31.7500 1.250 1/4-18 NPT N.3L 25 IP
                                              1094849 A32NER4 A32NER4 69.8500 2.750 50.8 2.0 406.4000 16.000 34.9250 1.375 1/4-18 NPT N.4L 25 IP
                                                1094859 A32NER6 A32NER6 69.8500 2.750 50.8 2.0 406.4000 16.000 34.9250 1.375 1/4-18 NPT N.6L 5/32
                                                  1094856 A32VNEL5 A32VNEL5 71.4250 2.812 50.8 2.0 406.4000 16.000 35.7120 1.406 1/4-18 NPT N.5R 1/4
                                                    1094851 A36NER4 A36NER4 76.2000 3.000 57.15 2.25 406.4000 16.000 38.1000 1.500 1/4-18 NPT N.4L 25 IP
                                                      1094846 A40NEL3 A40NEL3 76.2000 3.000 63.5 2.5 406.4000 16.000 38.1000 1.500 1/4-18 NPT N.3R 25 IP
                                                        1094854 A40NEL4 A40NEL4 82.5500 3.250 63.5 2.5