successfully added to cart
View Cart
Beyond™ Evolution™ Integral Toolholders
Beyond™ Evolution™ Integral Toolholders
Beyond™ Evolution™ Integral Toolholders
Beyond™ Evolution™ Integral Toolholders
Beyond™ Evolution™ Integral Toolholders
Beyond™ Evolution™ Integral Toolholders

Beyond Evolution Integral Toolholders • Integral Straight Top Clamp • Inch

Beyond™ Evolution™ Integral Toolholders

Features and benefits

  • Through the pocket coolant capable.

  • Reinforced for added support in specific workpiece diameters.

Uses and application

  • TurningTurning
  • ProfilingProfiling
  • FacingFacing
  • ChamferingChamfering
  • GroovingGrooving
  • Cut-OffCut-Off
  • Through Coolant: GroovingThrough Coolant: Grooving

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (44)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (44)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (44)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (44)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (44)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (44)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (44)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (44)
  • M Stainless Steel (44)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (44)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (44)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (44)
  • K Cast Iron (44)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (44)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (44)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (44)
  • N Non-Ferrous Materials (44)
    • N1
      Wrought Aluminum
      (44)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (44)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (44)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (44)
    • N6
      Carbon, Graphite Composites, CFRP
      (44)
  • S High-Temp Alloys (44)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (44)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (44)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (44)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (44)
  • H Hardened Materials (42)
    • H1
      Hardened Materials 44-48 HRC
      (42)
    • H2
      Hardened Materials 48-55 HRC
      (42)
Select First Choice
  • US (27)
Applications
  • Back Boring Back Boring (36)
  • Chamfer Turning Chamfer Turning (36)
  • Cut-Off Cut-Off (44)
  • Deep Grooving Deep Grooving (36)
  • Face Grooving Face Grooving (36)
  • Facing Facing (36)
  • Grooving Grooving (36)
  • ID Facing ID Facing (36)
  • ID Grooving ID Grooving (36)
  • ID Thread Turning ID Thread Turning (36)
  • Multiple Direction Cutting Multiple Direction Cutting (36)
  • OD Thread Turning OD Thread Turning (36)
  • Plunge Turning Plunge Turning (36)
  • Profiling Profiling (36)
  • TRN Boring TRN Boring (36)
  • Turning Turning (36)
Cutting Condition
  • Heavily Interrupted Cut (44)
  • Lightly Interrupted Cut (44)
  • Smooth Cut (44)
  • Varying Depth of Cut (44)
Tool Cutting Edge Angle
  • 90.0 (44)
to
Connection Style
  • Toolholder (44)
Cutting Edges Per Insert
  • 1.0 (44)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.15 (2)
  • 0.2 (38)
  • 0.203 (12)
  • 0.3 (6)
  • 0.4 (30)
  • 0.79 (12)
  • 0.794 (12)
  • 0.8 (18)
  • 1.0 (10)
  • 1.06 (10)
  • 1.19 (10)
  • 1.5 (12)
  • 1.56 (12)
  • 1.59 (12)
  • 1.65 (12)
  • 2.0 (12)
  • 2.06 (12)
  • 2.37 (12)
  • 2.38 (12)
  • 2.44 (12)
  • 2.5 (6)
  • 2.56 (6)
to
Corner Radius
  • 0.005 (10)
  • 0.006 (2)
  • 0.0079 (12)
  • 0.008 (38)
  • 0.012 (6)
  • 0.0156 (24)
  • 0.0157 (18)
  • 0.0158 (12)
  • 0.016 (30)
  • 0.031 (18)
  • 0.0313 (12)
  • 0.0315 (12)
  • 0.032 (18)
  • 0.039 (10)
  • 0.042 (10)
  • 0.047 (10)
  • 0.059 (12)
  • 0.062 (12)
  • 0.063 (12)
  • 0.065 (12)
  • 0.079 (12)
  • 0.081 (12)
  • 0.093 (12)
  • 0.094 (12)
  • 0.096 (12)
  • 0.098 (6)
  • 0.101 (6)
  • 0.787 (10)
to
application
Grade Of Cutting Tool
  • K313 (42)
  • KCK20B (42)
  • KCM35B (42)
  • KCP10B (42)
  • KCP25B (42)
  • KCU10 (42)
  • KCU25 (44)
Hand Of Tool
  • L (22)
  • R (22)
Wiper Insert
  • N (44)
Maximum Axial Groove Diameter
  • 42.0 (12)
  • 52.0 (10)
  • 62.0 (15)
  • 64.0 (5)
  • 82.0 (2)
to
Maximum Axial Groove Diameter
  • 1.654 (12)
  • 2.047 (10)
  • 2.441 (15)
  • 2.52 (5)
  • 3.228 (2)
to
Cutting Direction
  • E (44)
frontEnd
Clamp Style
  • C (8)
  • Y (36)
Insert Shape
  • PRISMATIC (44)
Cutting Width
  • 1.4 (2)
  • 1.404 (2)
  • 1.6 (2)
  • 2.0 (10)
  • 2.12 (10)
  • 2.125 (10)
  • 2.387 (10)
  • 2.388 (10)
  • 2.51 (10)
  • 2.511 (10)
  • 3.0 (12)
  • 3.125 (12)
  • 3.175 (12)
  • 3.177 (12)
  • 3.3 (12)
  • 3.301 (12)
  • 3.302 (12)
  • 4.0 (12)
  • 4.125 (12)
  • 4.75 (12)
  • 4.76 (12)
  • 4.762 (12)
  • 4.763 (12)
  • 4.873 (12)
  • 4.877 (12)
  • 4.878 (12)
  • 5.0 (6)
  • 5.125 (6)
to
Cutting Width
  • 0.055 (2)
  • 0.0551 (2)
  • 0.063 (2)
  • 0.0787 (10)
  • 0.0788 (10)
  • 0.079 (10)
  • 0.083 (10)
  • 0.084 (10)
  • 0.094 (10)
  • 0.099 (10)
  • 0.118 (12)
  • 0.1181 (12)
  • 0.123 (12)
  • 0.125 (12)
  • 0.13 (12)
  • 0.157 (12)
  • 0.1574 (12)
  • 0.1575 (12)
  • 0.158 (12)
  • 0.162 (12)
  • 0.187 (12)
  • 0.1875 (12)
  • 0.192 (12)
  • 0.1968 (6)
  • 0.197 (6)
  • 0.202 (6)
to
Maximum Cutting Depth
  • 16.0 (24)
  • 26.0 (12)
  • 32.0 (6)
  • 40.0 (2)
to
Maximum Cutting Depth
  • 0.63 (24)
  • 1.024 (12)
  • 1.26 (6)
  • 1.575 (2)
to
Insert Size
  • 2 (8)
  • 3 (10)
  • 4 (12)
  • 5 (6)
insertGeometry
Cutting Tool Material
  • H W (44)
backEnd
Connection Type
  • SQUARE SHANK (44)
other
Platform
  • Beyond Evolution (44)
Tool Unit
  • I (44)
Over All Length [L]
  • 114.3 (24)
  • 152.4 (20)
to
Over All Length [L]
  • 4.5 (24)
  • 6.0 (20)
to
Insert Hand
  • L (36)
  • N (44)
  • R (36)
obsoleteFacet
  • false (44)
  • true (44)
Cutting Condition Material
  • H-All (42)
  • K-All (44)
  • M-All (44)
  • N-All (44)
  • P-All (44)
  • S-All (44)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 44 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Insert Size [CD] Cutting Depth [CD] Cutting Depth [DMAX] Maximum Bore Diameter [DMAX] Maximum Bore Diameter [H1] Cutting Height [H1] Cutting Height [B] Shank Width [B] Shank Width [H2] Head Height [H2] Head Height [H3]Head Bottom Offset [H3]Head Bottom Offset [L1] Tool Length [L1] Tool Length [FS] Secondary F Dimension [FS] Secondary F Dimension [LH] Head Length [LH] Head Length [CS] Coolant Supply Size Clamp Screw ID Drive Size
5980938 EVSCTL100216 EVSCTL100216   2 16.0000 .6300 42.0000 1.654 15.8800 .6250 15.8800 .6250 22.8800 .9010     114.3000 4.500 14.9700 .5890 31.0000 1.220   T20
    5980939 EVSCTL100316C EVSCTL100316C   3 16.0000 .6300 52.0000 2.047 15.8800 .6250 15.8800 .6250 24.0000 .9000     114.3000 4.500 14.5200 .5720 35.0500 1.380 M8X1 25 IP
      5981011 EVSCTL120216 EVSCTL120216   2 16.0000 .6300 42.0000 1.654 19.0500 .7500 19.0500 .7500 26.0500 1.026     114.3000 4.500 18.0800 .7120 31.0000 1.220   T20
        5981012 EVSCTL120316C EVSCTL120316C   3 16.0000 .6300 52.0000 2.047 19.0500 .7500 19.0500 .7500 28.0000 1.100     114.3000 4.500 17.6300 .6940 36.8500 1.451 M8X1 T30
          5981013 EVSCTL120326C EVSCTL120326C   3 26.0000 1.024 62.0000 2.441 19.0500 .7500 19.0500 .7500 32.5500 1.281 4.0000 .1570 114.3000 4.500 17.6300 .6940 46.8600 1.845 M8X1 T30
            5981015 EVSCTL120426C EVSCTL120426C   4 26.0000 1.024 62.0000 2.441 19.0500 .7500 19.0500 .7500 29.0000 1.100 4.0000 .1570 114.3000 4.500 17.1300 .6750 47.0000 1.850 M8X1 T30
              5981019 EVSCTL160326C EVSCTL160326C   3 26.0000 1.024 62.0000 2.441 25.4000 1.000 25.4000 1.000 35.0000 1.400     152.4000 6.000 23.9800 .9440 46.8700 1.845 G1/8-28 T30
                5981021 EVSCTL160432C EVSCTL160432C   4 32.0000 1.260 64.0000 2.520 25.4000 1.000 25.4000 1.000 39.6000 1.559 4.0000 .1570 152.4000 6.000 23.4800 .9250 53.0000 2.087 G1/8-28 T30
                  6179400 EVSCTR080216 EVSCTR080216   2 16.0000 .6300 42.0000 1.654 12.7000 .5000 12.7100 .5000 23.7000 .9330     114.3000 4.500 11.8000 .4640 31.0000 1.220   T20
                    6179721 EVSCTR080316C EVSCTR080316C   3 16.0000 .6300 52.0000 2.047 12.7000 .5000 12.7100 .5000 23.8500 .9390 4.0000 .1570 114.3000 4.500 11.3500 .4470 33.3500 1.313 M8X1 T25
                      6179398 EVSCTR081B16 EVSCTR081B16   1B 16.0000 .6300 42.0000 1.654 12.7000 .5000 12.7100 .5000 23.7000 .9330     114.3000 4.500 12.0000 .4720 31.0000 1.220   T20
                        6179399 EVSCTR081F16 EVSCTR081F16   1F 16.0000 .6300 42.0000 1.654 12.7000 .5000 12.7100 .5000 23.7000 .9330     114.3000 4.500 11.9200 .4690 31.0000 1.220   T20
                          5980815 EVSCTR100216 EVSCTR100216   2 16.0000 .6300 42.0000 1.654 15.8800 .6250 15.8800 .6250 22.8800 .9010     114.3000 4.500 14.9700 .5890 31.0000 1.220   T20
                            5980816 EVSCTR100316C EVSCTR100316C   3 16.0000 .6300 52.0000 2.047 15.8800 .6250 15.8800 .6250 24.0000 .9000     114.3000 4.500 14.5200 .5720 35.0500 1.380 M8X1 25 IP
                              5980817 EVSCTR100416C EVSCTR100416C   4 16.0000 .6300 52.0000 2.047 15.8800 .6250 15.8800 .6250 24.0000 .9000     114.3000 4.500 14.0200 .5520 35.0500 1.380 M8X1 25 IP
                                5980818 EVSCTR120216 EVSCTR120216   2 16.0000 .6300 42.0000 1.654 19.0500 .7500 19.0500 .7500 26.0500 1.026     114.3000 4.500 18.0800 .7120 31.0000 1.220   T20
                                  5980819 EVSCTR120316C EVSCTR120316C   3 16.0000 .6300 52.0000 2.047 19.0500 .7500 19.0500 .7500 28.0000 1.100     114.3000 4.500 17.6300 .6940 36.8500 1.451 M8X1 T30
                                    5980820 EVSCTR120326C EVSCTR120326C   3 26.0000 1.024 62.0000 2.441 19.0500 .7500 19.0500 .7500 32.5500 1.281 4.0000 .1570 114.3000 4.500 17.6300 .6940 46.8600 1.845 M8X1 T30
                                      5980911 EVSCTR120416C EVSCTR120416C   4 16.0000 .6300 52.0000 2.047 19.0500 .7500 19.0500 .7500 28.0500 1.104     114.3000 4.500 17.1300 .6750 36.8500 1.451 M8X1 T30
                                        5980912 EVSCTR120426C EVSCTR120426C   4 26.0000 1.024 62.0000 2.441 19.0500 .7500 19.0500 .7500 32.5500 1.281 4.0000 .1570 114.3000 4.500 17.1300 .6750 47.0000 1.850 M8X1 T30
                                          5980913 EVSCTR160216 EVSCTR160216   2 16.0000 .6300 42.0000 1.654 25.4000 1.000 25.4000 1.000 32.4000 1.276     152.4000 6.000 24.4300 .9620 31.0000 1.220   T20
                                            5980914 EVSCTR160226 EVSCTR160226   2 26.0000 1.024 62.0000 2.441 25.4000 1.000 25.4000 1.000 34.4000 1.354     152.4000 6.000 24.4300 .9620 42.0000 1.654   25 IP
                                              5980915 EVSCTR160316C EVSCTR160316C   3 16.0000 .6300 62.0000 2.441 25.4000 1.000 25.4000 1.000 34.0000 1.400     152.4000 6.000 23.9800 .9440 36.8800 1.452 G1/8-28 T30
                                                5980916 EVSCTR160326C EVSCTR160326C   3 26.0000 1.024 62.0000 2.441 25.4000 1.000 25.4000 1.000 35.0000 1.400     152.4000 6.000 23.9800 .9440 46.8700 1.845 G1/8-28 T30
                                                  5980917 EVSCTR160426C EVSCTR160426C   4 26.0000 1.024 62.0000 2.441 25.4000 1.000 25.4000 1.000 35.0000 1.400     152.4000 6.000 23.4800 .9250 47.0000 1.850 G1/8-28 T30
                                                    5980918 EVSCTR160432C EVSCTR160432C   4 32.0000 1.260 64.0000 2.520 25.4000 1.000 25.4000 1.000 39.6000 1.559 4.0000 .1570 152.4000 6.000 23.4800 .9250 53.0000 2.087 G1/8-28 T30
                                                      5980933 EVSCTR200540C EVSCTR200540C   5 40.0000 1.575 82.0000 3.228 31.7500 1.250 31.7500 1.250 47.0000 1.850 4.0000 .1570 152.4000 6.000 29.3300 1.155 63.0000 2.480 G1/8-28 T45
                                                        6179724 EVSCTL080216 EVSCTL080216   2 16.0000 .6300 42.0000 1.654 12.7000 .5000 12.7100 .5000 23.7000 .9330     114.3000 4.500 11.8000 .4640 31.0000 1.220   T20
                                                          6179725 EVSCTL080316C EVSCTL080316C   3 16.0000 .6300 52.0000 2.047 12.7000 .5000 12.7100 .5000 23.8500 .9390 4.0000 .1570 114.3000 4.500 11.3500 .4470 33.3500 1.313 M8X1 T25
                                                            6179722 EVSCTL081B16 EVSCTL081B16   1B 16.0000 .6300 42.0000 1.654 12.7000 .5000 12.7100 .5000 23.7000 .9330     114.3000 4.500 12.0000 .4720 31.0000 1.220   T20
                                                              6179723 EVSCTL081F16 EVSCTL081F16   1F 16.0000 .6300 42.0000 1.654 12.7000 .5000 12.7100 .5000 23.7000 .9330     114.3000 4.500 11.9200 .4690 31.0000 1.220   T20
                                                                5980940 EVSCTL100416C EVSCTL100416C   4 16.0000 .6300 52.0000 2.047 15.8800 .6250 15.8800 .6250 24.0000 .9000     114.3000 4.500 14.0200 .5520 35.0500 1.380 M8X1 25 IP
                                                                  5981014 EVSCTL120416C EVSCTL120416C   4 16.0000 .6300 52.0000 2.047 19.0500 .7500 19.0500 .7500 28.0000 1.100     114.3000 4.500 17.1300 .6750 36.8500 1.451 M8X1 T30
                                                                    5981016 EVSCTL160216 EVSCTL160216   2 16.0000 .6300 42.0000 1.654 25.4000 1.000 25.4000 1.000 32.4000 1.276     152.4000 6.000 24.4300 .9620 31.0000 1.220   T20
                                                                      5981017 EVSCTL160226 EVSCTL160226   2 26.0000 1.024 62.0000 2.441 25.4000 1.000 25.4000 1.000 34.4000 1.354     152.4000 6.000 24.4300 .9620 42.0000 1.654   25 IP
                                                                        5981018 EVSCTL160316C EVSCTL160316C   3 16.0000 .6300 62.0000 2.441 25.4000 1.000 25.4000 1.000 34.0000 1.400     152.4000 6.000 23.9800 .9440 36.8800 1.452 G1/8-28 T30
                                                                          5981020 EVSCTL160426C EVSCTL160426C   4 26.0000 1.024 62.0000 2.441 25.4000 1.000 25.4000 1.000 35.0000 1.400     152.4000 6.000 23.4800 .9250 47.0000 1.850 G1/8-28 T30
                                                                            5981022 EVSCTL160526C EVSCTL160526C   5 26.0000 1.024 62.0000 2.441 25.4000 1.000 25.4000 1.000 35.0000 1.400     152.4000 6.000 22.9800 .9050 47.0000 1.850 G1/8-28 T30
                                                                              5981023 EVSCTL160532C EVSCTL160532C   5 32.0000 1.260 64.0000 2.520 25.4000 1.000 25.4000 1.000 39.6000 1.559 4.0000 .1570 152.4000 6.000 22.9800 .9050 53.0000 2.087 G1/8-28 T30
                                                                                5981024 EVSCTL200432C EVSCTL200432C   4 32.0000 1.260 64.0000 2.520 31.7500 1.250 31.7500 1.250 42.0000 1.700     152.4000 6.000 29.8300 1.175 53.0000 2.087 G1/8-28 T30
                                                                                  5981025 EVSCTL200540C EVSCTL200540C   5 40.0000 1.575 82.0000 3.228 31.7500 1.250 31.7500 1.250 47.0000 1.850 4.0000 .1570 152.4000 6.000 29.3300 1.155 63.0000 2.480 G1/8-28 T45
                                                                                    5980919 EVSCTR160526C EVSCTR160526C   5 26.0000 1.024 62.0000 2.441 25.4000 1.000 25.4000 1.000 35.0000 1.400     152.4000 6.000 22.9800 .9050 47.0000 1.850 G1/8-28 T30
                                                                                      5980920 EVSCTR160532C EVSCTR160532C   5 32.0000 1.260 62.0000 2.441 25.4000 1.000 25.4000 1.000 39.6000 1.559 4.0000 .1570 152.4000 6.000 22.9800 .9050 53.0000 2.087 G1/8-28 T30
                                                                                        5980932 EVSCTR200432C EVSCTR200432C   4 32.0000 1.260 64.0000 2.520 31.7500 1.250 31.7500 1.250 42.0000 1.700     152.4000 6.000 29.8300 1.175 53.0000 2.087 G1/8-28 T30
                                                                                          List price:
                                                                                          Discount: %
                                                                                          Your price::
                                                                                          Replacement This item is not available
                                                                                          Replacement Product This item may be available through a distributor
                                                                                          Qty

                                                                                          Dimensions • Beyond Evolution Integral Holders

                                                                                          If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                                                                          You are about to create a duplicate . Do you want to proceed?
                                                                                          You are about to delete Do you want to proceed?
                                                                                          What would you like to rename your to?
                                                                                          Please enter a valid name
                                                                                          Please enter a name for the duplicate
                                                                                          Please enter a valid name
                                                                                          You are about to add to your My Solutions page. Do you want to proceed?
                                                                                          Please enter a valid name
                                                                                          Send a copy of

                                                                                          Please enter a valid Email
                                                                                          Please enter a valid name

                                                                                          We have found the following CAD Drawings

                                                                                          Select the files you are looking for and download them all at once

                                                                                          You should be logged to see your dashboard information
                                                                                          The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                                                                          item(s) successfully added to the cart
                                                                                          View Cart