successfully added to cart
View Cart
TOP NOTCHねじ切りボーリングヘッド
TOP NOTCHねじ切りボーリングヘッド
TOP NOTCHねじ切りボーリングヘッド
TOP NOTCHねじ切りボーリングヘッド

H-NE

TOP NOTCHねじ切りボーリングヘッド

Uses and application

  • I.D. Internal ThreadingI.D. Internal Threading
  • I.D. TurningI.D. Turning
  • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
  • I.D. GroovingI.D. Grooving

Workpiece Materials

P
M
K
N
S
H
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (25)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (25)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (25)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (25)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (25)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (25)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (25)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (25)
  • M Stainless Steel (25)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (25)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (25)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (25)
  • K Cast Iron (25)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (25)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (25)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (25)
  • N Non-Ferrous Materials (25)
    • N1
      Wrought Aluminum
      (25)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (25)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (25)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (25)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (25)
    • N6
      Carbon, Graphite Composites, CFRP
      (25)
    • N7
      MMC's
      (25)
  • S High-Temp Alloys (25)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (25)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (25)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (25)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (25)
  • H Hardened Materials (25)
    • H1
      Hardened Materials 44-48 HRC
      (25)
    • H2
      Hardened Materials 48-55 HRC
      (18)
    • H3
      Hardened Materials 56-60 HRC
      (15)
    • H4
      Hardened Materials >60 HRC
      (15)
Applications
  • Cut-Off Cut-Off (25)
  • Deep Grooving Deep Grooving (25)
  • Face Grooving Face Grooving (25)
  • Grooving Grooving (25)
  • ID Facing ID Facing (25)
  • ID Grooving ID Grooving (25)
  • ID Thread Turning ID Thread Turning (25)
  • Multiple Direction Cutting Multiple Direction Cutting (25)
  • OD Thread Turning OD Thread Turning (25)
  • Profiling Profiling (25)
  • TRN Boring TRN Boring (25)
  • Threading Threading (25)
  • Turning Turning (25)
Type of Thread
  • 60 (18)
  • ACME (24)
  • API (18)
  • API RD (16)
  • BSW (10)
  • BUTTRESS (18)
  • M (10)
  • NPT (11)
  • STUB ACME (10)
  • UN (18)
  • UNJ (10)
Cutting Condition
  • Heavily Interrupted Cut (24)
  • Lightly Interrupted Cut (24)
  • Smooth Cut (24)
  • Varying Depth of Cut (24)
Tool Cutting Edge Angle
  • 90.0 (25)
to
Cutting Edges Per Insert
  • 1.0 (18)
  • 2.0 (25)
to
cornerConfiguration
Corner Radius
  • 0.026 (5)
  • 0.051 (5)
  • 0.057 (5)
  • 0.066 (10)
  • 0.076 (18)
  • 0.08 (10)
  • 0.089 (5)
  • 0.09 (5)
  • 0.094 (10)
  • 0.097 (5)
  • 0.1 (10)
  • 0.102 (11)
  • 0.116 (5)
  • 0.117 (5)
  • 0.127 (11)
  • 0.131 (10)
  • 0.132 (10)
  • 0.133 (10)
  • 0.15 (10)
  • 0.155 (9)
  • 0.157 (10)
  • 0.16 (8)
  • 0.165 (18)
  • 0.173 (10)
  • 0.178 (10)
  • 0.19 (18)
  • 0.191 (18)
  • 0.198 (10)
  • 0.2 (10)
  • 0.202 (10)
  • 0.224 (10)
  • 0.235 (10)
  • 0.244 (5)
  • 0.25 (10)
  • 0.251 (10)
  • 0.254 (18)
  • 0.255 (5)
  • 0.269 (10)
  • 0.282 (10)
  • 0.284 (10)
  • 0.3 (10)
  • 0.315 (14)
  • 0.318 (18)
  • 0.33 (10)
  • 0.34 (10)
  • 0.343 (13)
  • 0.356 (10)
  • 0.404 (10)
  • 0.406 (16)
  • 0.43 (10)
  • 0.445 (18)
  • 0.472 (5)
  • 0.49 (10)
  • 0.508 (10)
  • 0.565 (4)
  • 0.57 (5)
  • 0.572 (18)
  • 0.575 (13)
  • 0.787 (10)
  • 0.826 (6)
  • 0.902 (18)
  • 1.0 (10)
  • 1.194 (10)
  • 1.195 (5)
  • 1.25 (10)
  • 1.5 (10)
  • 1.585 (10)
  • 1.588 (18)
  • 1.59 (4)
  • 1.75 (10)
  • 1.98 (5)
  • 1.981 (10)
  • 2.0 (18)
  • 2.25 (18)
  • 2.388 (18)
  • 2.39 (4)
  • 2.5 (8)
  • 3.175 (8)
  • 3.18 (4)
to
Corner Radius
  • 0.002 (5)
  • 0.0023 (5)
  • 0.0026 (10)
  • 0.003 (18)
  • 0.0031 (10)
  • 0.0035 (5)
  • 0.0037 (10)
  • 0.0038 (5)
  • 0.004 (11)
  • 0.0046 (10)
  • 0.005 (11)
  • 0.0052 (10)
  • 0.0053 (10)
  • 0.0059 (10)
  • 0.006 (9)
  • 0.0062 (10)
  • 0.0065 (18)
  • 0.0068 (10)
  • 0.007 (10)
  • 0.0075 (18)
  • 0.0078 (10)
  • 0.0079 (4)
  • 0.008 (10)
  • 0.0088 (10)
  • 0.0093 (10)
  • 0.0096 (5)
  • 0.0099 (10)
  • 0.01 (18)
  • 0.0106 (10)
  • 0.0111 (10)
  • 0.0112 (10)
  • 0.0118 (10)
  • 0.0124 (10)
  • 0.0125 (18)
  • 0.013 (10)
  • 0.0135 (18)
  • 0.014 (10)
  • 0.0159 (10)
  • 0.016 (16)
  • 0.017 (10)
  • 0.0175 (18)
  • 0.0186 (5)
  • 0.0193 (10)
  • 0.02 (10)
  • 0.0225 (18)
  • 0.031 (10)
  • 0.0325 (6)
  • 0.0355 (18)
  • 0.0394 (10)
  • 0.047 (10)
  • 0.0492 (10)
  • 0.0591 (10)
  • 0.0625 (18)
  • 0.0689 (10)
  • 0.078 (10)
  • 0.0787 (18)
  • 0.0886 (18)
  • 0.094 (18)
  • 0.0984 (8)
  • 0.106 (5)
  • 0.125 (8)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (10)
  • K313 (18)
  • K420 (24)
  • K4H (10)
  • K68 (24)
  • KB1345 (18)
  • KB1630 (15)
  • KB5625 (10)
  • KC250 (10)
  • KC5010 (25)
  • KC5025 (24)
  • KC5410 (18)
  • KC710 (18)
  • KC720 (18)
  • KC722 (18)
  • KC730 (25)
  • KC732 (10)
  • KC810 (24)
  • KC850 (24)
  • KC910 (10)
  • KC9110 (18)
  • KC9120 (10)
  • KC9320 (18)
  • KC935 (18)
  • KC950 (18)
  • KCK20 (15)
  • KCK20B (15)
  • KCP10B (16)
  • KCP25B (16)
  • KCU10 (22)
  • KCU25 (23)
  • KD050 (5)
  • KD081 (10)
  • KD100 (14)
  • KD120 (18)
  • KD1425 (9)
  • KT175 (10)
  • KT315 (18)
  • KU10T (18)
  • KU25T (18)
  • KU30T (18)
  • KY3000 (18)
Wiper Insert
  • N (25)
Minimum Axial Groove Diameter
  • 1.75 (2)
  • 2.0 (3)
  • 2.25 (2)
  • 2.5 (6)
  • 2.75 (4)
  • 3.0 (4)
  • 3.25 (4)
to
Minimum Axial Groove Diameter
  • 44.45 (2)
  • 50.8 (3)
  • 57.15 (2)
  • 63.5 (6)
  • 69.85 (4)
  • 76.2 (4)
  • 82.55 (4)
to
Maximum Axial Groove Diameter
  • 9999.0 (21)
to
Maximum Axial Groove Diameter
  • 393.661 (21)
to
Maximum Bore Depth
  • 127.0 (2)
  • 152.4 (3)
  • 177.8 (6)
  • 203.2 (6)
  • 228.6 (2)
  • 254.0 (6)
to
Maximum Bore Depth
  • 5.0 (2)
  • 6.0 (3)
  • 7.0 (6)
  • 8.0 (6)
  • 9.0 (2)
  • 10.0 (6)
to
frontEnd
Clamp Style
  • N (25)
Insert Shape
  • TN-TOP NOTCH (25)
Cutting Width
  • 1.0 (10)
  • 1.19 (5)
  • 1.194 (10)
  • 1.2 (10)
  • 1.5 (10)
  • 1.57 (10)
  • 1.575 (10)
  • 1.75 (10)
  • 1.829 (10)
  • 1.981 (10)
  • 2.0 (10)
  • 2.2 (10)
  • 2.235 (10)
  • 2.24 (5)
  • 2.25 (5)
  • 2.388 (10)
  • 2.39 (5)
  • 2.464 (10)
  • 2.5 (10)
  • 2.667 (10)
  • 2.743 (10)
  • 2.75 (10)
  • 2.794 (10)
  • 2.997 (10)
  • 3.0 (18)
  • 3.099 (10)
  • 3.17 (10)
  • 3.175 (18)
  • 3.18 (4)
  • 3.2 (18)
  • 3.25 (10)
  • 3.251 (10)
  • 3.32 (5)
  • 3.329 (5)
  • 3.5 (18)
  • 3.607 (10)
  • 3.96 (10)
  • 3.962 (10)
  • 3.974 (5)
  • 3.988 (10)
  • 4.0 (18)
  • 4.24 (5)
  • 4.242 (17)
  • 4.25 (5)
  • 4.3 (10)
  • 4.5 (18)
  • 4.521 (10)
  • 4.699 (14)
  • 4.775 (18)
  • 4.78 (4)
  • 4.785 (4)
  • 4.788 (4)
  • 4.8 (10)
  • 4.801 (18)
  • 4.81 (10)
  • 4.88 (5)
  • 4.95 (9)
  • 5.0 (8)
  • 5.004 (8)
  • 5.131 (8)
  • 5.41 (8)
  • 5.5 (8)
  • 5.537 (6)
  • 5.563 (8)
  • 6.0 (8)
  • 6.35 (14)
  • 6.36 (4)
  • 6.48 (5)
  • 7.137 (6)
  • 7.925 (6)
  • 9.525 (6)
  • 9.73 (3)
to
Cutting Width
  • 0.0394 (10)
  • 0.047 (10)
  • 0.0472 (10)
  • 0.0591 (10)
  • 0.062 (10)
  • 0.0689 (10)
  • 0.072 (10)
  • 0.078 (10)
  • 0.0787 (10)
  • 0.079 (4)
  • 0.0866 (10)
  • 0.088 (10)
  • 0.0886 (5)
  • 0.094 (10)
  • 0.097 (10)
  • 0.0984 (10)
  • 0.105 (10)
  • 0.108 (10)
  • 0.1083 (10)
  • 0.11 (10)
  • 0.118 (10)
  • 0.1181 (18)
  • 0.122 (10)
  • 0.125 (18)
  • 0.126 (18)
  • 0.128 (10)
  • 0.131 (5)
  • 0.1378 (18)
  • 0.142 (10)
  • 0.156 (10)
  • 0.157 (10)
  • 0.1574 (18)
  • 0.1575 (18)
  • 0.167 (17)
  • 0.1673 (5)
  • 0.169 (10)
  • 0.1771 (18)
  • 0.1772 (18)
  • 0.178 (10)
  • 0.185 (14)
  • 0.188 (18)
  • 0.189 (18)
  • 0.192 (5)
  • 0.195 (9)
  • 0.1969 (8)
  • 0.197 (8)
  • 0.202 (8)
  • 0.213 (8)
  • 0.2165 (8)
  • 0.2166 (4)
  • 0.218 (6)
  • 0.219 (8)
  • 0.2362 (8)
  • 0.25 (14)
  • 0.255 (5)
  • 0.281 (6)
  • 0.312 (6)
  • 0.375 (6)
  • 0.383 (3)
to
insertGeometry
Cutting Tool Material
  • B H (18)
  • B L (10)
  • C N (18)
  • D P (14)
  • H T (18)
  • H W (25)
backEnd
Back-End Diameter
  • 1.25 (2)
  • 1.5 (3)
  • 1.75 (6)
  • 2.0 (6)
  • 2.25 (2)
  • 2.5 (6)
to
Back-End Diameter
  • 31.75 (2)
  • 38.1 (3)
  • 44.45 (6)
  • 50.8 (6)
  • 57.15 (2)
  • 63.5 (6)
to
other
Platform
  • Top Notch (20)
Tool Unit
  • I (25)
Over All Length [L]
  • 41.275 (25)
to
Over All Length [L]
  • 1.625 (25)
to
Insert Hand
  • L (13)
  • R (12)
Cutting Condition Material
  • H-All (24)
  • K-All (24)
  • M-All (24)
  • N-All (24)
  • P-All (24)
  • S-All (24)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 25 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length Gage Insert Shim Screw ID Drive Size Clamp Screw ID Drive Size
1095315 H20NEL3W H20NEL3W 44.4500 1.750 31.75 1.25 22.2250 .8750 41.2750 1.625 N.3R   25 IP
    1095314 H20NER3W H20NER3W 44.4500 1.750 31.75 1.25 22.2250 .8750 41.2750 1.625 N.3L   25 IP
      1095363 H24NEL3W H24NEL3W 50.8000 2.000 38.1 1.5 25.4000 1.000 41.2750 1.625 N.3R   25 IP
        1095362 H24NER3W H24NER3W 50.8000 2.000 38.1 1.5 25.4000 1.000 41.2750 1.625 N.3L   25 IP
          1095367 H24NER8W H24NER8W 50.8000 2.000 38.1 1.5 25.4000 1.000 41.2750 1.625 N.8L 1/16 3/16
            1095419 H28NEL3W H28NEL3W 57.1500 2.250 44.45 1.75 28.5750 1.125 41.2750 1.625 N.3R   25 IP
              1095422 H28NEL4W H28NEL4W 63.5000 2.500 44.45 1.75 31.7500 1.250 41.2750 1.625 N.4R   25 IP
                1095453 H28NEL6W H28NEL6W 63.5000 2.500 44.45 1.75 31.7500 1.250 41.2750 1.625 N.6R   5/32
                  1095418 H28NER3W H28NER3W 57.1500 2.250 44.45 1.75 28.5750 1.125 41.2750 1.625 N.3L   25 IP
                    1095421 H28NER4W H28NER4W 63.5000 2.500 44.45 1.75 31.7500 1.250 41.2750 1.625 N.4L   25 IP
                      1095452 H28NER6W H28NER6W 63.5000 2.500 44.45 1.75 31.7500 1.250 41.2750 1.625 N.6L   5/32
                        1095457 H32NEL3W H32NEL3W 63.5000 2.500 50.8 2.0 31.7500 1.250 41.2750 1.625 N.3R   25 IP
                          1095459 H32NEL4W H32NEL4W 69.8500 2.750 50.8 2.0 34.9250 1.375 41.2750 1.625 N.4R   25 IP
                            1095513 H32NEL6W H32NEL6W 69.8500 2.750 50.8 2.0 34.9250 1.375 41.2750 1.625 N.6R   5/32
                              1095456 H32NER3W H32NER3W 63.5000 2.500 50.8 2.0 31.7500 1.250 41.2750 1.625 N.3L   25 IP
                                1095458 H32NER4W H32NER4W 69.8500 2.750 50.8 2.0 34.9250 1.375 41.2750 1.625 N.4L   25 IP
                                  1095512 H32NER6W H32NER6W 69.8500 2.750 50.8 2.0 34.9250 1.375 41.2750 1.625 N.6L   5/32
                                    1095517 H36NEL4W H36NEL4W 76.2000 3.000 57.15 2.25 38.1000 1.500 41.2750 1.625 N.4R   25 IP
                                      1095516 H36NER4W H36NER4W 76.2000 3.000 57.15 2.25 38.1000 1.500 41.2750 1.625 N.4L   25 IP
                                        1095534 H40NEL3W H40NEL3W 76.2000 3.000 63.5 2.5 38.1000 1.500 41.2750 1.625 N.3R   25 IP
                                          1095536 H40NEL4W H40NEL4W 82.5500 3.250 63.5 2.5 41.2750 1.625 41.2750 1.625 N.4R   25 IP
                                            1095572 H40NEL6W H40NEL6W 82.5500 3.250 63.5 2.5 41.2750 1.625 41.2750 1.625 N.6R   5/32
                                              1095533 H40NER3W H40NER3W 76.2000 3.000 63.5 2.5 38.1000 1.500 41.2750 1.625 N.3L   25 IP
                                                1095535 H40NER4W H40NER4W 82.5500 3.250 63.5 2.5 41.2750 1.625 41.2750 1.625 N.4L   25 IP
                                                  1095571 H40NER6W H40NER6W 82.5500 3.250 63.5 2.5 41.2750 1.625 41.2750 1.625 N.6L   5/32
                                                    List price:
                                                    Discount: %
                                                    Your price::
                                                    Replacement This item is not available
                                                    Replacement Product This item may be available through a distributor
                                                    Qty
                                                    If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                                    You are about to create a duplicate . Do you want to proceed?
                                                    You are about to delete Do you want to proceed?
                                                    What would you like to rename your to?
                                                    Please enter a valid name
                                                    Please enter a name for the duplicate
                                                    Please enter a valid name
                                                    You are about to add to your My Solutions page. Do you want to proceed?
                                                    Please enter a valid name
                                                    Send a copy of

                                                    Please enter a valid Email
                                                    Please enter a valid name

                                                    We have found the following CAD Drawings

                                                    Select the files you are looking for and download them all at once

                                                    You should be logged to see your dashboard information
                                                    The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                                    item(s) successfully added to the cart
                                                    View Cart