successfully added to cart
View Cart

コンビネーションツール

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (287)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (287)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (287)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (287)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (287)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (287)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (287)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (248)
  • M Stainless Steel (167)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (167)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (167)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (121)
  • K Cast Iron (290)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (290)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (290)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (290)
  • N Non-Ferrous Materials (170)
    • N1
      Wrought Aluminum
      (170)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (170)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (170)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (170)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (170)
    • N6
      Carbon, Graphite Composites, CFRP
      (170)
    • N7
      MMC's
      (124)
  • S High-Temp Alloys (121)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (121)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (121)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (121)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (121)
  • H Hardened Materials (118)
    • H1
      Hardened Materials 44-48 HRC
      (118)
    • H2
      Hardened Materials 48-55 HRC
      (118)
    • H3
      Hardened Materials 56-60 HRC
      (118)
    • H4
      Hardened Materials >60 HRC
      (118)
  • C CFRP Materials (26)
    • C1
      CFRP, CFRP / CFRP
      (16)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous
      (16)
    • C3
      CFRP / Titanium CFRP / High Temp
      (11)
    • C4
      CFRP / Stainless Steel
      (11)
Select First Choice
  • IN (3)
Applications
  • Convex Drilling Convex Drilling (216)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (216)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (216)
  • Counterboring Counterboring (216)
  • Countersinking Countersinking (256)
  • Drilling Drilling (273)
  • Flat Bottom Drilling Flat Bottom Drilling (252)
  • Inclined Entry Drilling Inclined Entry Drilling (216)
  • Inclined Exit Drilling Inclined Exit Drilling (216)
  • Pre-Condition Pre-Condition (258)
  • Stacked Plates Drilling Stacked Plates Drilling (236)
  • X-Offset Drilling X-Offset Drilling (216)
Cutting Diameter
  • 3.175 (2)
  • 3.4 (3)
  • 3.5 (1)
  • 3.797 (1)
  • 3.8 (1)
  • 3.96 (1)
  • 3.97 (1)
  • 4.0 (4)
  • 4.1 (3)
  • 4.2 (1)
  • 4.3 (1)
  • 4.5 (1)
  • 4.6 (3)
  • 4.623 (2)
  • 4.763 (1)
  • 4.775 (1)
  • 4.828 (5)
  • 4.9 (1)
  • 5.0 (1)
  • 5.1 (3)
  • 5.2 (1)
  • 5.3 (1)
  • 5.4 (1)
  • 5.41 (2)
  • 5.5 (1)
  • 5.55 (3)
  • 5.558 (5)
  • 5.6 (1)
  • 5.8 (1)
  • 6.0 (4)
  • 6.1 (3)
  • 6.2 (1)
  • 6.3 (1)
  • 6.35 (8)
  • 6.4 (1)
  • 6.5 (1)
  • 6.528 (1)
  • 6.6 (1)
  • 6.7 (1)
  • 6.746 (1)
  • 6.8 (1)
  • 6.9 (1)
  • 6.909 (1)
  • 7.0 (1)
  • 7.145 (2)
  • 7.3 (3)
  • 7.4 (1)
  • 7.5 (1)
  • 7.541 (1)
  • 7.8 (1)
  • 7.9 (1)
  • 7.938 (8)
  • 7.94 (3)
  • 7.95 (1)
  • 8.0 (7)
  • 8.1 (7)
  • 8.164 (3)
  • 8.2 (1)
  • 8.204 (3)
  • 8.3 (4)
  • 8.334 (5)
  • 8.4 (4)
  • 8.433 (4)
  • 8.5 (3)
  • 8.52 (2)
  • 8.6 (3)
  • 8.611 (2)
  • 8.7 (3)
  • 8.733 (3)
  • 8.8 (3)
  • 8.839 (2)
  • 8.9 (3)
  • 9.0 (4)
  • 9.093 (3)
  • 9.1 (6)
  • 9.129 (5)
  • 9.13 (3)
  • 9.2 (3)
  • 9.3 (3)
  • 9.347 (4)
  • 9.4 (4)
  • 9.5 (3)
  • 9.525 (9)
  • 9.558 (2)
  • 9.576 (2)
  • 9.6 (3)
  • 9.7 (1)
  • 9.703 (2)
  • 9.8 (1)
  • 9.804 (2)
  • 9.83 (2)
  • 9.9 (2)
  • 9.921 (3)
  • 10.0 (7)
  • 10.023 (3)
  • 10.084 (3)
  • 10.1 (6)
  • 10.2 (4)
  • 10.262 (3)
  • 10.3 (4)
  • 10.319 (1)
  • 10.32 (4)
  • 10.4 (4)
  • 10.49 (3)
  • 10.5 (3)
  • 10.6 (3)
  • 10.7 (3)
  • 10.71 (1)
  • 10.716 (2)
  • 10.8 (3)
  • 10.9 (2)
  • 11.0 (4)
  • 11.1 (6)
  • 11.11 (1)
  • 11.112 (1)
  • 11.113 (3)
  • 11.125 (1)
  • 11.2 (4)
  • 11.3 (4)
  • 11.4 (3)
  • 11.5 (3)
  • 11.508 (1)
  • 11.509 (2)
  • 11.6 (2)
  • 11.61 (2)
  • 11.7 (3)
  • 11.8 (3)
  • 11.9 (3)
  • 11.908 (2)
  • 12.0 (7)
  • 12.1 (3)
  • 12.2 (6)
  • 12.3 (1)
  • 12.304 (4)
  • 12.4 (3)
  • 12.474 (3)
  • 12.5 (3)
  • 12.6 (2)
  • 12.7 (4)
  • 12.8 (3)
  • 12.903 (2)
  • 13.0 (4)
  • 13.096 (4)
  • 13.097 (1)
  • 13.1 (3)
  • 13.2 (4)
  • 13.28 (3)
  • 13.3 (3)
  • 13.38 (3)
  • 13.4 (3)
  • 13.494 (3)
  • 13.5 (3)
  • 13.6 (2)
  • 13.7 (2)
  • 13.8 (2)
  • 13.891 (2)
  • 13.896 (2)
  • 13.94 (2)
  • 14.0 (7)
  • 14.1 (6)
  • 14.2 (4)
  • 14.28 (1)
  • 14.288 (4)
  • 14.3 (4)
  • 14.4 (3)
  • 14.5 (2)
  • 14.6 (2)
  • 14.666 (2)
  • 14.684 (2)
  • 14.7 (2)
  • 14.8 (2)
  • 14.9 (2)
  • 15.0 (4)
  • 15.083 (3)
  • 15.1 (3)
  • 15.2 (3)
  • 15.3 (3)
  • 15.38 (3)
  • 15.4 (3)
  • 15.479 (3)
  • 15.5 (6)
  • 15.6 (3)
  • 15.7 (3)
  • 15.8 (3)
  • 15.87 (1)
  • 15.875 (5)
  • 15.95 (3)
  • 16.0 (7)
  • 16.027 (3)
  • 16.078 (3)
  • 16.1 (3)
  • 16.2 (3)
  • 16.271 (3)
  • 16.3 (3)
  • 16.4 (3)
  • 16.5 (6)
  • 16.6 (3)
  • 16.667 (1)
  • 16.669 (1)
  • 16.67 (3)
  • 16.7 (3)
  • 16.8 (3)
  • 16.873 (3)
  • 16.9 (3)
  • 17.0 (4)
  • 17.066 (3)
  • 17.1 (3)
  • 17.2 (3)
  • 17.3 (3)
  • 17.4 (3)
  • 17.46 (1)
  • 17.463 (4)
  • 17.475 (1)
  • 17.5 (6)
  • 17.6 (3)
  • 17.7 (4)
  • 17.8 (3)
  • 17.859 (3)
  • 17.9 (3)
  • 18.0 (5)
  • 18.1 (2)
  • 18.2 (2)
  • 18.258 (2)
  • 18.3 (2)
  • 18.4 (2)
  • 18.5 (2)
  • 18.6 (2)
  • 18.654 (2)
  • 18.7 (2)
  • 18.8 (2)
  • 18.9 (2)
  • 19.05 (2)
  • 20.65 (1)
  • 22.225 (1)
  • 23.825 (1)
to
Cutting Diameter
  • 0.125 (2)
  • 0.1339 (1)
  • 0.134 (2)
  • 0.1378 (1)
  • 0.1495 (1)
  • 0.1496 (1)
  • 0.156 (1)
  • 0.1563 (1)
  • 0.157 (3)
  • 0.1575 (1)
  • 0.161 (2)
  • 0.1614 (1)
  • 0.1654 (1)
  • 0.1693 (1)
  • 0.1772 (1)
  • 0.181 (2)
  • 0.1811 (1)
  • 0.182 (2)
  • 0.1875 (1)
  • 0.188 (1)
  • 0.1901 (5)
  • 0.1929 (1)
  • 0.1969 (1)
  • 0.2008 (1)
  • 0.201 (2)
  • 0.2047 (1)
  • 0.2087 (1)
  • 0.2126 (1)
  • 0.213 (2)
  • 0.2165 (1)
  • 0.218 (2)
  • 0.2185 (1)
  • 0.2187 (1)
  • 0.2188 (4)
  • 0.2205 (1)
  • 0.2283 (1)
  • 0.236 (3)
  • 0.2362 (1)
  • 0.24 (2)
  • 0.2402 (1)
  • 0.2441 (1)
  • 0.248 (1)
  • 0.25 (8)
  • 0.252 (1)
  • 0.2559 (1)
  • 0.257 (1)
  • 0.2598 (1)
  • 0.2638 (1)
  • 0.2656 (1)
  • 0.2677 (1)
  • 0.2717 (1)
  • 0.272 (1)
  • 0.2756 (1)
  • 0.2813 (2)
  • 0.287 (2)
  • 0.2874 (1)
  • 0.2913 (1)
  • 0.2953 (1)
  • 0.2969 (1)
  • 0.3071 (1)
  • 0.311 (1)
  • 0.3125 (8)
  • 0.313 (1)
  • 0.315 (7)
  • 0.3189 (4)
  • 0.319 (3)
  • 0.3214 (3)
  • 0.3228 (1)
  • 0.323 (3)
  • 0.3268 (4)
  • 0.3281 (5)
  • 0.3307 (4)
  • 0.332 (4)
  • 0.3346 (3)
  • 0.3354 (2)
  • 0.3386 (3)
  • 0.339 (2)
  • 0.3425 (3)
  • 0.3438 (3)
  • 0.3465 (3)
  • 0.348 (2)
  • 0.3504 (3)
  • 0.3543 (4)
  • 0.358 (5)
  • 0.3583 (4)
  • 0.3594 (5)
  • 0.3622 (3)
  • 0.3661 (3)
  • 0.368 (4)
  • 0.3701 (4)
  • 0.374 (3)
  • 0.375 (9)
  • 0.3763 (2)
  • 0.377 (2)
  • 0.378 (3)
  • 0.3819 (1)
  • 0.382 (2)
  • 0.3858 (1)
  • 0.386 (2)
  • 0.387 (2)
  • 0.3898 (2)
  • 0.3906 (3)
  • 0.3937 (4)
  • 0.394 (3)
  • 0.3946 (3)
  • 0.397 (3)
  • 0.3976 (4)
  • 0.398 (2)
  • 0.4016 (4)
  • 0.404 (3)
  • 0.4055 (4)
  • 0.4063 (5)
  • 0.4094 (4)
  • 0.413 (3)
  • 0.4134 (3)
  • 0.4173 (3)
  • 0.4213 (3)
  • 0.4219 (3)
  • 0.4252 (3)
  • 0.4291 (2)
  • 0.4331 (4)
  • 0.437 (6)
  • 0.4375 (5)
  • 0.438 (1)
  • 0.4409 (4)
  • 0.4449 (4)
  • 0.4488 (3)
  • 0.4528 (3)
  • 0.4531 (3)
  • 0.4567 (2)
  • 0.4571 (2)
  • 0.4606 (3)
  • 0.4646 (3)
  • 0.4685 (3)
  • 0.4688 (2)
  • 0.472 (3)
  • 0.4724 (4)
  • 0.4764 (3)
  • 0.48 (2)
  • 0.4803 (4)
  • 0.4843 (1)
  • 0.4844 (4)
  • 0.4882 (3)
  • 0.4911 (3)
  • 0.4921 (3)
  • 0.4961 (2)
  • 0.5 (4)
  • 0.5039 (3)
  • 0.508 (2)
  • 0.5118 (4)
  • 0.5156 (5)
  • 0.5157 (1)
  • 0.516 (2)
  • 0.5197 (4)
  • 0.5228 (3)
  • 0.5236 (3)
  • 0.5268 (3)
  • 0.5276 (3)
  • 0.5313 (3)
  • 0.5315 (3)
  • 0.5354 (2)
  • 0.5394 (2)
  • 0.5433 (2)
  • 0.5469 (2)
  • 0.5471 (2)
  • 0.5488 (2)
  • 0.551 (3)
  • 0.5512 (4)
  • 0.555 (2)
  • 0.5551 (4)
  • 0.5591 (4)
  • 0.5625 (5)
  • 0.563 (4)
  • 0.5669 (3)
  • 0.5709 (2)
  • 0.5748 (2)
  • 0.5774 (2)
  • 0.5781 (2)
  • 0.5787 (2)
  • 0.5827 (2)
  • 0.5866 (2)
  • 0.5906 (4)
  • 0.5938 (3)
  • 0.5945 (3)
  • 0.5984 (3)
  • 0.6024 (3)
  • 0.6055 (3)
  • 0.6063 (3)
  • 0.6094 (3)
  • 0.61 (2)
  • 0.6102 (4)
  • 0.6142 (3)
  • 0.6181 (3)
  • 0.622 (3)
  • 0.625 (6)
  • 0.628 (3)
  • 0.6299 (4)
  • 0.63 (3)
  • 0.631 (3)
  • 0.633 (3)
  • 0.6339 (3)
  • 0.6378 (3)
  • 0.6406 (3)
  • 0.6417 (3)
  • 0.6457 (3)
  • 0.6496 (4)
  • 0.65 (2)
  • 0.6535 (3)
  • 0.6562 (1)
  • 0.6563 (4)
  • 0.6575 (3)
  • 0.6614 (3)
  • 0.6643 (3)
  • 0.6654 (3)
  • 0.6693 (4)
  • 0.6719 (3)
  • 0.6732 (3)
  • 0.6772 (3)
  • 0.6811 (3)
  • 0.685 (3)
  • 0.6875 (5)
  • 0.688 (1)
  • 0.689 (6)
  • 0.6929 (3)
  • 0.6969 (4)
  • 0.7008 (3)
  • 0.7031 (3)
  • 0.7047 (3)
  • 0.7087 (3)
  • 0.709 (2)
  • 0.7126 (2)
  • 0.7165 (2)
  • 0.7188 (2)
  • 0.7205 (2)
  • 0.7244 (2)
  • 0.7283 (2)
  • 0.7323 (2)
  • 0.7344 (2)
  • 0.7362 (2)
  • 0.7402 (2)
  • 0.7441 (2)
  • 0.75 (2)
  • 0.813 (1)
  • 0.875 (1)
  • 0.938 (1)
to
Maximum Hole Depth [L4]
  • 0.3385 (1)
  • 0.3937 (1)
  • 0.42 (1)
  • 0.48 (1)
  • 0.4843 (1)
  • 0.52 (1)
  • 0.53 (1)
  • 0.54 (1)
  • 0.56 (1)
  • 0.58 (1)
  • 0.61 (1)
  • 0.62 (1)
  • 0.63 (1)
  • 0.6535 (1)
  • 0.6772 (1)
  • 0.69 (1)
  • 0.7 (1)
  • 0.72 (1)
  • 0.73 (1)
  • 0.75 (2)
  • 0.76 (2)
  • 0.7638 (1)
  • 0.7677 (1)
  • 0.8 (1)
  • 0.83 (2)
  • 0.85 (1)
  • 0.86 (1)
  • 0.87 (2)
  • 0.8898 (1)
  • 0.89 (1)
  • 0.9 (1)
  • 0.91 (1)
  • 0.92 (1)
  • 0.93 (1)
  • 0.94 (2)
  • 0.95 (2)
  • 0.97 (1)
  • 0.98 (1)
  • 0.9843 (10)
  • 1.0 (4)
  • 1.03 (1)
  • 1.04 (1)
  • 1.05 (2)
  • 1.0551 (1)
  • 1.06 (2)
  • 1.063 (2)
  • 1.07 (2)
  • 1.08 (2)
  • 1.09 (1)
  • 1.1 (1)
  • 1.11 (1)
  • 1.12 (4)
  • 1.13 (2)
  • 1.14 (1)
  • 1.15 (1)
  • 1.16 (1)
  • 1.17 (1)
  • 1.1772 (2)
  • 1.18 (1)
  • 1.1811 (8)
  • 1.185 (1)
  • 1.1969 (1)
  • 1.2087 (1)
  • 1.2205 (1)
  • 1.2283 (2)
  • 1.2362 (1)
  • 1.24 (2)
  • 1.2402 (1)
  • 1.248 (1)
  • 1.2559 (1)
  • 1.2677 (1)
  • 1.2756 (2)
  • 1.2874 (1)
  • 1.293 (1)
  • 1.2953 (2)
  • 1.3 (1)
  • 1.3031 (2)
  • 1.315 (1)
  • 1.3307 (2)
  • 1.34 (1)
  • 1.3504 (1)
  • 1.3583 (1)
  • 1.36 (2)
  • 1.3701 (1)
  • 1.374 (1)
  • 1.378 (1)
  • 1.39 (1)
  • 1.4 (1)
  • 1.42 (2)
  • 1.4213 (1)
  • 1.4291 (1)
  • 1.4449 (3)
  • 1.4528 (1)
  • 1.48 (2)
  • 1.4803 (1)
  • 1.5 (1)
  • 1.5079 (1)
  • 1.5157 (1)
  • 1.5197 (1)
  • 1.5236 (1)
  • 1.54 (1)
  • 1.57 (1)
  • 1.5827 (1)
  • 1.59 (2)
  • 1.6024 (1)
  • 1.6299 (1)
  • 1.6417 (1)
  • 1.65 (2)
  • 1.6614 (1)
  • 1.6732 (1)
  • 1.6969 (1)
  • 1.71 (2)
  • 1.7126 (1)
  • 1.7165 (1)
  • 1.73 (1)
  • 1.7323 (1)
  • 1.752 (1)
  • 1.77 (1)
  • 1.81 (1)
  • 1.89 (3)
  • 1.9685 (1)
  • 2.01 (2)
  • 2.0472 (1)
  • 2.126 (1)
  • 2.13 (2)
  • 2.2047 (1)
  • 2.24 (1)
  • 2.2834 (1)
  • 2.3622 (1)
  • 2.5197 (1)
  • 2.6772 (1)
  • 2.83 (1)
  • 2.99 (1)
to