ようこそ
設定をご確認ください
設定の更新

提案製品

Product Family suggestions

ケナメタルにお任せ

製品特有のご質問がありますか？

専門分野別のグローバルサービス担当の全リストを見る

クイックオーダー
品目 がカートに正常に追加されました
カートの表示
ソリューションに戻る

ソリューション編集

ソリューション追加

ソリューション名: {{SolutionName}}

座ぐり加工工具

フィルタを選択
Filters
フィルタ
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (105)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (105)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (105)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (105)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (105)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (105)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (105)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (105)
  • M Stainless Steel (101)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (101)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (101)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (101)
  • K Cast Iron (130)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (130)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (130)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (130)
  • N Non-Ferrous Materials (68)
    • N1
      Wrought Aluminum
      (68)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (68)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (68)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (68)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (68)
    • N6
      Carbon, Graphite Composites, CFRP
      (68)
    • N7
      MMC's
      (68)
  • S High-Temp Alloys (100)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (100)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (100)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (100)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (100)
  • H Hardened Materials (55)
    • H1
      Hardened Materials 44-48 HRC
      (55)
    • H2
      Hardened Materials 48-55 HRC
      (55)
    • H3
      Hardened Materials 56-60 HRC
      (55)
    • H4
      Hardened Materials >60 HRC
      (55)
Applications
Applications
  • Counterboring Counterboring (35)
  • Drilling Drilling (35)
  • ID Thread Turning ID Thread Turning (1)
Cutting Diameter
Cutting Diameter
  • 0.595 in (1)
  • 0.635 in (1)
  • 0.674 in (1)
  • 0.714 in (2)
  • 0.794 in (2)
  • 0.812 in (1)
  • 0.834 in (2)
  • 0.873 in (2)
  • 0.912 in (2)
  • 0.953 in (2)
  • 0.991 in (2)
  • 1.0 in (1)
  • 1.031 in (1)
  • 1.07 in (1)
  • 1.109 in (1)
  • 1.187 in (1)
  • 1.188 in (1)
  • 1.268 in (1)
  • 1.307 in (1)
  • 1.346 in (1)
  • 1.375 in (1)
  • 1.387 in (1)
  • 1.425 in (1)
  • 1.504 in (1)
  • 1.583 in (1)
  • 1.625 in (1)
  • 1.661 in (1)
  • 1.819 in (1)
  • 2.0 in (1)
  • 2.375 in (1)
  • 2.75 in (1)
  • 3.125 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 15.125 mm (1)
  • 16.125 mm (1)
  • 17.125 mm (1)
  • 18.125 mm (2)
  • 20.175 mm (2)
  • 20.625 mm (1)
  • 21.175 mm (2)
  • 22.175 mm (2)
  • 23.175 mm (2)
  • 24.175 mm (2)
  • 25.175 mm (2)
  • 25.401 mm (1)
  • 26.175 mm (1)
  • 27.175 mm (1)
  • 28.175 mm (1)
  • 30.151 mm (1)
  • 30.175 mm (1)
  • 32.2 mm (1)
  • 33.2 mm (1)
  • 34.2 mm (1)
  • 34.926 mm (1)
  • 35.2 mm (1)
  • 36.2 mm (1)
  • 38.2 mm (1)
  • 40.2 mm (1)
  • 41.276 mm (1)
  • 42.2 mm (1)
  • 46.2 mm (1)
  • 50.801 mm (1)
  • 60.325 mm (1)
  • 69.851 mm (1)
  • 79.375 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Interrupted (13)
  • Stable (68)
  • Unstable (28)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 8.5 mm (2)
  • 11.0 mm (1)
  • 12.701 mm (1)
  • 13.5 mm (3)
  • 15.875 mm (1)
  • 16.0 mm (7)
  • 18.5 mm (1)
  • 19.05 mm (1)
  • 21.0 mm (3)
  • 22.225 mm (1)
  • 23.0 mm (2)
  • 23.5 mm (3)
  • 25.401 mm (1)
  • 25.5 mm (3)
  • 27.5 mm (1)
  • 30.0 mm (1)
  • 30.5 mm (1)
  • 31.75 mm (1)
  • 33.5 mm (2)
  • 38.1 mm (1)
  • 44.45 mm (1)
  • 50.801 mm (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.335 in (2)
  • 0.433 in (1)
  • 0.5 in (1)
  • 0.531 in (3)
  • 0.625 in (1)
  • 0.63 in (7)
  • 0.728 in (1)
  • 0.75 in (1)
  • 0.828 in (3)
  • 0.875 in (1)
  • 0.906 in (2)
  • 0.925 in (3)
  • 1.0 in (1)
  • 1.004 in (3)
  • 1.083 in (1)
  • 1.181 in (1)
  • 1.201 in (1)
  • 1.25 in (1)
  • 1.319 in (2)
  • 1.5 in (1)
  • 1.75 in (1)
  • 2.0 in (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 1.504 in (1)
  • 2.102 in (1)
  • 2.535 in (1)
  • 3.035 in (1)
Reach Min to Reach Max
Reach
Reach
  • 38.2 mm (1)
  • 53.401 mm (1)
  • 64.4 mm (1)
  • 77.101 mm (1)
Reach Min to Reach Max
Connection Style
Connection Style
  • Weldon (5)
  • Whistle Notch 2 (30)
Number of Flutes
Number of Flutes
  • 2 (12)
  • 3 (27)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 2.0 (139)
  • 4.0 (23)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.008 in (3)
  • 0.016 in (53)
  • 0.024 in (4)
  • 0.031 in (20)
  • 0.039 in (6)
  • 0.047 in (6)
  • 0.063 in (5)
  • 0.079 in (3)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (3)
  • 0.4 mm (53)
  • 0.601 mm (4)
  • 0.8 mm (20)
  • 1.0 mm (6)
  • 1.201 mm (6)
  • 1.6 mm (5)
  • 2.0 mm (3)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (100)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (100)
Corner Chamfer Min to Corner Chamfer Max
application
Drilling Condition
Drilling Condition
  • Interrupted (52)
  • Smooth Cut (8)
  • Stable (107)
  • Unstable (67)
  • Varying Depth of Cut (8)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CD4 (43)
  • CM4 (41)
  • CS5 (40)
  • KC7140 (42)
  • KC720 (7)
  • KC7210 (42)
  • KC7215 (79)
  • KC7815 (7)
  • KCPK10 (44)
  • KCS10B (8)
  • KCU25 (52)
  • KCU40 (53)
  • KM1 (48)
Hand Of Tool
Hand Of Tool
  • R (39)
Wiper Insert
Wiper Insert
  • N (100)
Drill Type
Drill Type
  • 86-04 (39)
insertGeometry
Shape
Shape
  • S-SQUARE 90 (100)
Insert IC Size
Insert IC Size
  • 6.351 mm (18)
  • 7.926 mm (23)
  • 9.525 mm (25)
  • 12.701 mm (24)
  • 15.875 mm (10)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.25 in (18)
  • 0.312 in (23)
  • 0.375 in (25)
  • 0.5 in (24)
  • 0.625 in (10)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 6.351 mm (18)
  • 7.926 mm (23)
  • 9.525 mm (25)
  • 12.701 mm (34)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.25 in (18)
  • 0.312 in (23)
  • 0.375 in (25)
  • 0.5 in (34)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • 20 (43)
  • 21 (43)
  • 22 (4)
Cutting Tool Material
Cutting Tool Material
  • H W (100)
Tolerance Class
Tolerance Class
  • H (15)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (35)
Back-End Diameter
Back-End Diameter
  • 19.05 mm (2)
  • 20.0 mm (23)
  • 25.401 mm (3)
  • 31.75 mm (1)
  • 32.0 mm (7)
  • 38.1 mm (1)
  • 50.801 mm (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.75 in (2)
  • 0.787 in (23)
  • 1.0 in (3)
  • 1.25 in (1)
  • 1.26 in (7)
  • 1.5 in (1)
  • 2.0 in (2)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
製品を表示
メートル
インチ

オリジナル製品

S2S Weldon Shank • Inch S2S Weldon Shank • Inch

CTR — カウンターボア
(9 Products)
  • カウンタボーリングカウンタボーリング
  • シャンク — ストレートWeldonシャンク — ストレートWeldon
  • フラッドクーラント：ドリル加工フラッドクーラント：ドリル加工
  • フルートの構造： 2フルートの構造： 2
  • フルートの構造： 3フルートの構造： 3
製品を表示
SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Drill Diameter M [D1] Drill Diameter M Drill Diameter Tol. Min Drill Diameter Tol. Min Drill Diameter Tol. Max Drill Diameter Tol. Max [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter Pre Machined Hole Diameter [D6] Pre Machined Hole Diameter [D6] [L] Overall Length [L] Overall Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [LS] Shank Length [LS] Shank Length Gage Insert Number of Insert Cutting Diameter 1
1992509 CBT0813RW075N3 CBT0813RW075N3 20.6370 .8125 -0.150000 -0.006 0.150000 .0060 19.05 .75 13.4870 .5312 88.9100 3.500 12.7000 .5000 52.0 2.047 SPHX060204R.. 3
    定価:
    $282.37 /各
    価格::
    1992511 CBT1000RW075N2 CBT1000RW075N2 25.4000 1.000 -0.150000 -0.006 0.150000 .0060 19.05 .75 16.6620 .6562 88.9100 3.500 15.8750 .6250 52.0 2.047 SPHX090304R.. 2
      定価:
      $306.49 /各
      価格::
      1992584 CBT1375RW100N3 CBT1375RW100N3 34.9250 1.375 -0.196000 -0.007 0.196000 .0077 25.4 1.0 23.0120 .9062 101.6100 4.000 22.2250 .8750 58.4 2.299 SPHX090304R.. 3
        この品目はありません
        この品目は、代理店経由で入手できる場合があります
        価格::
        1992774 CBT2375RW150N3 CBT2375RW150N3 60.3250 2.375 -0.196000 -0.007 0.196000 .0077 38.1 1.5 39.7000 1.562 126.9900 5.000 38.1000 1.500 68.598 2.700 SPHX120404R.. 3
          この品目はありません
          この品目は、代理店経由で入手できる場合があります
          価格::
          1992775 CBT2750RW200N3 CBT2750RW200N3 69.8500 2.750 -0.196000 -0.007 0.196000 .0077 50.8 2.0 46.0500 1.812 152.3900 6.000 44.4500 1.750 83.0 3.267 SPHX120404R.. 3
            この品目はありません
            この品目は、代理店経由で入手できる場合があります
            価格::
            1992776 CBT3125RW200N3 CBT3125RW200N3 79.3750 3.125 -0.196000 -0.007 0.196000 .0077 50.8 2.0 52.4000 2.062 165.0900 6.500 50.8000 2.000 83.0 3.267 SPHX150504R.. 3
              この品目はありません
              この品目は、代理店経由で入手できる場合があります
              価格::
              定価:
              割引: %
              価格::
              配置転換 この品目はありません
              交換品 この品目は、代理店経由で入手できる場合があります

              オリジナル製品

              SPHX-R20 SPHX-R20

              CTR Drilling Inserts
              (51 Products)
              製品を表示
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [D1] Insert Hole Size [D1] Insert Hole Size [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [GAA] Insert Rake Angle [Clearance Angle Major Clearning Angle Minor
              1928669 SPHX060204R20 SPHX060204R20 KC7140 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.4000 .0156 12.000 7.000 7.000
                定価:
                $19.70 /各
                価格::
                1928670 SPHX070304R20 SPHX070304R20 KC7140 7.9370 .3125 2.8500 .1122 3.1800 .1252 0.4000 .0156 12.000 7.000 7.000
                  定価:
                  $21.10 /各
                  価格::
                  1928667 SPHX090304R20 SPHX090304R20 KC7215 9.5250 .3750 3.5000 .1378 3.1800 .1252 0.4000 .0160 12.000 7.000 7.000
                    定価:
                    $23.34 /各
                    価格::
                    1928671 SPHX090304R20 SPHX090304R20 KC7140 9.5250 .3750 3.5000 .1378 3.1800 .1252 0.4000 .0160 12.000 7.000 7.000
                      定価:
                      $22.66 /各
                      価格::
                      1974209 SPHX090310R20 SPHX090310R20 KC7215 9.5250 .3750 3.5000 .1378 3.1800 .1252 1.0000 .0394 12.000 7.000 7.000
                        定価:
                        $23.34 /各
                        価格::
                        1928672 SPHX120404R20 SPHX120404R20 KC7140 12.7000 .5000 4.5000 .1772 4.7600 .1874 0.4000 .0156 12.000 7.000 7.000
                          定価:
                          $24.33 /各
                          価格::
                          定価:
                          割引: %
                          価格::
                          配置転換 この品目はありません
                          交換品 この品目は、代理店経由で入手できる場合があります

                          オリジナル製品

                          SPHX-R21 SPHX-R21

                          CTR Drilling Inserts
                          (44 Products)
                          製品を表示
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [D1] Insert Hole Size [D1] Insert Hole Size [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [GAA] Insert Rake Angle [Clearance Angle Major Clearning Angle Minor
                          2245846 SPHX060202R21 SPHX060202R21 KC7215 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.2000 .0080 4.000 7.000 7.000
                            定価:
                            $20.56 /各
                            価格::
                            2245847 SPHX060206R21 SPHX060206R21 KC7215 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.6000 .0236 4.000 7.000 7.000
                              定価:
                              $20.56 /各
                              価格::
                              2245848 SPHX060208R21 SPHX060208R21 KC7215 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.8000 .0312 4.000 7.000 7.000
                                定価:
                                $20.56 /各
                                価格::
                                2245849 SPHX070306R21 SPHX070306R21 KC7215 7.9370 .3125 2.8500 .1122 3.1800 .1252 0.6000 .0236 4.000 7.000 7.000
                                  定価:
                                  $21.57 /各
                                  価格::
                                  2245851 SPHX070310R21 SPHX070310R21 KC7215 7.9370 .3125 2.8500 .1122 3.1800 .1252 1.0000 .0394 4.000 7.000 7.000
                                    定価:
                                    $21.57 /各
                                    価格::
                                    1208830 SPHX150504R-21 SPHX150504R-21 KM1 15.8750 .6250 5.5000 .2165 5.9500 .2343 0.4000 .0156 4.000 7.000 7.000
                                      定価:
                                      $24.51 /各
                                      価格::
                                      定価:
                                      割引: %
                                      価格::
                                      配置転換 この品目はありません
                                      交換品 この品目は、代理店経由で入手できる場合があります

                                      オリジナル製品

                                      SPHX-R22 SPHX-R22

                                      CTR Drilling Inserts
                                      (5 Products)
                                      製品を表示
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [D1] Insert Hole Size [D1] Insert Hole Size [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [GAA] Insert Rake Angle [Clearance Angle Major
                                      1208764 SPHX060204R-22 SPHX060204R-22 KM1 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.4000 .0156 25.000 7.000
                                        定価:
                                        $19.57 /各
                                        価格::
                                        1192535 SPHX070304R-22 SPHX070304R-22 KM1 7.9370 .3125 2.8500 .1122 3.1800 .1252 0.4000 .0156 25.000 7.000
                                          定価:
                                          $20.17 /各
                                          価格::
                                          1192539 SPHX090304R-22 SPHX090304R-22 KM1 9.5250 .3750 3.5000 .1378 3.1800 .1252 0.4000 .0160 25.000 7.000
                                            定価:
                                            $20.51 /各
                                            価格::
                                            1208789 SPHX120404R-22 SPHX120404R-22 KM1 12.7000 .5000 4.5000 .1772 4.7600 .1874 0.4000 .0156 25.000 7.000
                                              定価:
                                              $23.46 /各
                                              価格::
                                              1208833 SPHX150504R-22 SPHX150504R-22 KM1 15.8750 .6250 5.5000 .2165 5.9500 .2343 0.4000 .0156 25.000 7.000
                                                定価:
                                                $24.51 /各
                                                価格::
                                                定価:
                                                割引: %
                                                価格::
                                                配置転換 この品目はありません
                                                交換品 この品目は、代理店経由で入手できる場合があります

                                                オリジナル製品

                                                S2S Whistle Notch WNシャンク • メトリック S2S Whistle Notch WNシャンク • メトリック

                                                CTR™ • カウンターボア
                                                (30 Products)
                                                • カウンタボーリングカウンタボーリング
                                                • シャンク — ストレート Whistle Notch™シャンク — ストレート Whistle Notch™
                                                • クーラント — スルークーラントクーラント — スルークーラント
                                                • フルートの構造： 2フルートの構造： 2
                                                • フルートの構造： 3フルートの構造： 3
                                                製品を表示
                                                SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Drill Diameter M [D1] Drill Diameter M Drill Diameter Tol. Min Drill Diameter Tol. Min Drill Diameter Tol. Max Drill Diameter Tol. Max [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter Pre Machined Hole Diameter [D6] Pre Machined Hole Diameter [D6] [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth Gage Insert Number of Insert Cutting Diameter 1
                                                1246170 CBTF180R2WD20N3M CBTF180R2WD20N3M 18.1350 .7140 -0.120000 -0.004 0.120000 .0047 20.0 .7874 8.4000 .3307 86.0000 3.385 36.0000 1.417 13.5000 .5315 SPHX060204R.. 3
                                                  定価:
                                                  $312.67 /各
                                                  価格::
                                                  1191074 CBTF200R2WD20N3M CBTF200R2WD20N3M 20.1650 .7940 -0.120000 -0.004 0.120000 .0047 20.0 .7874 8.5000 .3346 86.0000 3.385 36.0000 1.417 16.0000 .6299 SPHX060204R.. 3
                                                    定価:
                                                    $329.20 /各
                                                    価格::
                                                    1191075 CBTF220R2WD20N3M CBTF220R2WD20N3M 22.1650 .8730 -0.120000 -0.004 0.120000 .0047 20.0 .7874 10.5000 .4134 86.0000 3.385 36.0000 1.417 16.0000 .6299 SPHX060204R.. 3
                                                      定価:
                                                      $345.74 /各
                                                      価格::
                                                      1191076 CBTF260R2WD20N2M CBTF260R2WD20N2M 26.1650 1.030 -0.120000 -0.004 0.120000 .0047 20.0 .7874 13.0000 .5118 96.0000 3.779 46.0000 1.811 23.5000 .9252 SPHX090304R.. 2
                                                        定価:
                                                        $329.13 /各
                                                        価格::
                                                        1246166 CBTF300R2WD20N3M CBTF300R2WD20N3M 30.1650 1.188 -0.120000 -0.004 0.120000 .0047 20.0 .7874 15.0000 .5906 101.0000 3.976 51.0000 2.007 23.0000 .9055 SPHX090304R.. 3
                                                          定価:
                                                          $411.89 /各
                                                          価格::
                                                          1246168 CBTF420R2WD32N3M CBTF420R2WD32N3M 42.1950 1.661 -0.120000 -0.004 0.120000 .0047 32.0 1.259 22.0000 .8661 126.0000 4.960 66.0000 2.598 33.5000 1.318 SPHX120404R.. 3
                                                            定価:
                                                            $511.09 /各
                                                            価格::