ようこそ
設定をご確認ください
設定の更新

提案製品

Product Family suggestions

ケナメタルにお任せ

カスタマーサポート

グローバルカスタマーサポートの連絡先を探します

クイックオーダー
品目 がカートに正常に追加されました
カートの表示

1) KSEM PLUSヘッド

フィルタを選択
フィルタ
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (183)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (183)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (183)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (183)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (183)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (183)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (183)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (183)
  • M Stainless Steel (183)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (183)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (183)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (183)
  • K Cast Iron (183)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (183)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (183)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (183)
  • N Non-Ferrous Materials (183)
    • N1
      Wrought Aluminum (183)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (183)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (183)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (183)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (183)
    • N6
      Carbon, Graphite Composites, CFRP (183)
    • N7
      MMC's (183)
  • S High-Temp Alloys (183)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (183)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (183)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (183)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (183)
  • H Hardened Materials (97)
    • H1
      Hardened Materials 44-48 HRC (97)
第1選択を選択
  • CN (64)
  • DE (58)
  • GB (23)
  • IN (6)
  • SG (5)
  • US (43)
Applications
Applications
  • Drilling Drilling (183)
  • Stacked Plates Drilling Stacked Plates Drilling (97)
Cutting Diameter
Cutting Diameter
  • 1.102 in (2)
  • 1.125 in (2)
  • 1.143 in (2)
  • 1.156 in (2)
  • 1.181 in (2)
  • 1.188 in (2)
  • 1.22 in (2)
  • 1.25 in (2)
  • 1.26 in (2)
  • 1.299 in (2)
  • 1.307 in (2)
  • 1.313 in (2)
  • 1.339 in (2)
  • 1.375 in (2)
  • 1.379 in (2)
  • 1.417 in (2)
  • 1.438 in (2)
  • 1.457 in (2)
  • 1.476 in (2)
  • 1.496 in (2)
  • 1.5 in (2)
  • 1.536 in (2)
  • 1.543 in (2)
  • 1.563 in (2)
  • 1.575 in (2)
  • 1.614 in (2)
  • 1.625 in (2)
  • 1.655 in (2)
  • 1.693 in (2)
  • 1.732 in (2)
  • 1.75 in (2)
  • 1.772 in (2)
  • 1.811 in (2)
  • 1.85 in (2)
  • 1.875 in (2)
  • 1.891 in (2)
  • 1.929 in (2)
  • 1.969 in (2)
  • 2.0 in (2)
  • 2.008 in (2)
  • 2.047 in (2)
  • 2.087 in (2)
  • 2.125 in (2)
  • 2.126 in (2)
  • 2.165 in (2)
  • 2.205 in (2)
  • 2.244 in (2)
  • 2.25 in (2)
  • 2.283 in (2)
  • 2.323 in (2)
  • 2.362 in (2)
  • 2.375 in (2)
  • 2.402 in (2)
  • 2.441 in (2)
  • 2.48 in (2)
  • 2.5 in (2)
  • 2.52 in (2)
  • 2.559 in (2)
  • 2.598 in (2)
  • 2.625 in (2)
  • 2.638 in (2)
  • 2.677 in (2)
  • 2.717 in (2)
  • 2.75 in (2)
  • 2.757 in (2)
  • 2.795 in (2)
  • 2.835 in (2)
  • 2.874 in (2)
  • 2.875 in (2)
  • 2.914 in (2)
  • 2.953 in (2)
  • 2.992 in (2)
  • 3.0 in (2)
  • 3.071 in (2)
  • 3.125 in (2)
  • 3.15 in (2)
  • 3.189 in (1)
  • 3.228 in (1)
  • 3.25 in (2)
  • 3.307 in (2)
  • 3.346 in (1)
  • 3.375 in (1)
  • 3.386 in (2)
  • 3.426 in (1)
  • 3.465 in (1)
  • 3.5 in (2)
  • 3.504 in (1)
  • 3.543 in (1)
  • 3.622 in (2)
  • 3.625 in (1)
  • 3.74 in (2)
  • 3.75 in (2)
  • 3.781 in (2)
  • 3.858 in (1)
  • 3.898 in (1)
  • 3.938 in (2)
  • 4.0 in (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 28.0 mm (2)
  • 28.576 mm (2)
  • 29.0 mm (2)
  • 29.35 mm (2)
  • 30.0 mm (2)
  • 30.175 mm (2)
  • 31.0 mm (2)
  • 31.75 mm (2)
  • 32.0 mm (2)
  • 33.0 mm (2)
  • 33.2 mm (2)
  • 33.35 mm (2)
  • 34.0 mm (2)
  • 34.926 mm (2)
  • 35.0 mm (2)
  • 36.0 mm (2)
  • 36.525 mm (2)
  • 37.0 mm (2)
  • 37.5 mm (2)
  • 38.0 mm (2)
  • 38.1 mm (2)
  • 39.0 mm (2)
  • 39.2 mm (2)
  • 39.7 mm (2)
  • 40.0 mm (2)
  • 41.0 mm (2)
  • 41.276 mm (2)
  • 42.0 mm (2)
  • 43.0 mm (2)
  • 44.0 mm (2)
  • 44.45 mm (2)
  • 45.0 mm (2)
  • 46.0 mm (2)
  • 47.0 mm (2)
  • 47.625 mm (2)
  • 48.0 mm (2)
  • 49.0 mm (2)
  • 50.0 mm (2)
  • 50.801 mm (2)
  • 51.0 mm (2)
  • 52.0 mm (2)
  • 53.0 mm (2)
  • 53.975 mm (2)
  • 54.0 mm (2)
  • 55.0 mm (2)
  • 56.0 mm (2)
  • 57.0 mm (2)
  • 57.151 mm (2)
  • 58.0 mm (2)
  • 59.0 mm (2)
  • 60.0 mm (2)
  • 60.325 mm (2)
  • 61.0 mm (2)
  • 62.0 mm (2)
  • 63.0 mm (2)
  • 63.5 mm (2)
  • 64.0 mm (2)
  • 65.0 mm (2)
  • 66.0 mm (2)
  • 66.675 mm (2)
  • 67.0 mm (2)
  • 68.0 mm (2)
  • 69.0 mm (2)
  • 69.851 mm (2)
  • 70.0 mm (2)
  • 71.0 mm (2)
  • 72.0 mm (2)
  • 73.0 mm (2)
  • 73.025 mm (2)
  • 74.0 mm (2)
  • 75.0 mm (2)
  • 76.0 mm (2)
  • 76.2 mm (2)
  • 78.0 mm (2)
  • 79.375 mm (2)
  • 80.0 mm (2)
  • 81.0 mm (1)
  • 82.0 mm (1)
  • 82.551 mm (2)
  • 84.0 mm (2)
  • 85.0 mm (1)
  • 85.726 mm (1)
  • 86.0 mm (2)
  • 87.0 mm (1)
  • 88.0 mm (1)
  • 88.9 mm (2)
  • 89.0 mm (1)
  • 90.0 mm (1)
  • 92.0 mm (2)
  • 92.075 mm (1)
  • 95.0 mm (2)
  • 95.25 mm (2)
  • 96.0 mm (2)
  • 98.0 mm (1)
  • 99.0 mm (1)
  • 100.0 mm (2)
  • 101.601 mm (2)
Cutting Diameter Min to Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 20.0 mm (17)
  • 22.0 mm (7)
  • 25.0 mm (37)
  • 30.0 mm (30)
  • 35.0 mm (17)
  • 36.0 mm (11)
  • 40.0 mm (19)
  • 45.0 mm (11)
  • 50.0 mm (8)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.787 in (17)
  • 0.866 in (7)
  • 0.984 in (37)
  • 1.181 in (30)
  • 1.379 in (17)
  • 1.417 in (11)
  • 1.575 in (19)
  • 1.772 in (11)
  • 1.969 in (8)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.787 in (17)
  • 0.866 in (7)
  • 0.917 in (9)
  • 0.935 in (8)
  • 0.944 in (7)
  • 0.984 in (13)
  • 1.101 in (6)
  • 1.114 in (7)
  • 1.181 in (17)
  • 1.272 in (9)
  • 1.298 in (8)
  • 1.417 in (11)
  • 1.469 in (11)
  • 1.491 in (9)
  • 1.518 in (9)
  • 1.666 in (13)
  • 1.703 in (6)
  • 1.863 in (3)
  • 1.885 in (7)
  • 1.901 in (1)
  • 1.911 in (5)
Reach Min to Reach Max
Reach
Reach
  • 20.0 mm (17)
  • 22.0 mm (7)
  • 23.3 mm (9)
  • 23.75 mm (8)
  • 23.951 mm (7)
  • 25.0 mm (13)
  • 27.975 mm (6)
  • 28.3 mm (7)
  • 30.0 mm (17)
  • 32.301 mm (9)
  • 32.975 mm (8)
  • 36.0 mm (11)
  • 37.301 mm (11)
  • 37.875 mm (9)
  • 38.526 mm (9)
  • 42.325 mm (13)
  • 43.25 mm (6)
  • 47.325 mm (3)
  • 47.875 mm (7)
  • 48.25 mm (1)
  • 48.526 mm (5)
Reach Min to Reach Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (183)
  • 2.0 (104)
  • 3.0 (79)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Over All Length [L]
Over All Length [L]
  • 1.397 in (2)
  • 1.403 in (2)
  • 1.409 in (3)
  • 1.413 in (2)
  • 1.416 in (2)
  • 1.421 in (2)
  • 1.429 in (2)
  • 1.445 in (1)
  • 1.451 in (2)
  • 1.459 in (3)
  • 1.465 in (2)
  • 1.472 in (1)
  • 1.534 in (1)
  • 1.541 in (2)
  • 1.547 in (2)
  • 1.555 in (2)
  • 1.6 in (2)
  • 1.606 in (2)
  • 1.614 in (2)
  • 1.621 in (2)
  • 1.651 in (1)
  • 1.657 in (2)
  • 1.663 in (3)
  • 1.669 in (2)
  • 1.677 in (1)
  • 1.736 in (1)
  • 1.743 in (2)
  • 1.75 in (1)
  • 1.758 in (1)
  • 1.764 in (1)
  • 1.772 in (1)
  • 1.818 in (1)
  • 1.825 in (1)
  • 1.832 in (1)
  • 1.839 in (2)
  • 1.845 in (1)
  • 1.941 in (1)
  • 1.948 in (2)
  • 1.955 in (1)
  • 1.962 in (1)
  • 1.969 in (1)
  • 1.975 in (1)
  • 2.023 in (1)
  • 2.031 in (1)
  • 2.036 in (1)
  • 2.043 in (2)
  • 2.05 in (1)
  • 2.136 in (1)
  • 2.144 in (2)
  • 2.15 in (1)
  • 2.157 in (1)
  • 2.164 in (2)
  • 2.17 in (1)
  • 2.206 in (1)
  • 2.213 in (2)
  • 2.219 in (1)
  • 2.226 in (1)
  • 2.233 in (2)
  • 2.24 in (1)
  • 2.247 in (1)
  • 2.341 in (1)
  • 2.347 in (2)
  • 2.354 in (1)
  • 2.361 in (1)
  • 2.368 in (2)
  • 2.375 in (1)
  • 2.41 in (1)
  • 2.418 in (2)
  • 2.424 in (1)
  • 2.431 in (1)
  • 2.438 in (2)
  • 2.445 in (1)
  • 2.452 in (1)
  • 2.604 in (1)
  • 2.611 in (2)
  • 2.618 in (1)
  • 2.77 in (1)
  • 2.777 in (2)
  • 2.783 in (1)
  • 2.797 in (1)
  • 2.818 in (1)
  • 3.633 in (1)
  • 3.64 in (2)
  • 3.648 in (1)
  • 3.654 in (1)
  • 3.66 in (2)
  • 3.798 in (1)
  • 3.805 in (1)
  • 3.813 in (1)
  • 3.819 in (1)
  • 3.826 in (1)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 35.45 mm (2)
  • 35.6 mm (2)
  • 35.801 mm (3)
  • 35.9 mm (2)
  • 35.975 mm (2)
  • 36.1 mm (2)
  • 36.301 mm (2)
  • 36.7 mm (1)
  • 36.85 mm (2)
  • 37.051 mm (3)
  • 37.2 mm (2)
  • 37.4 mm (1)
  • 38.95 mm (1)
  • 39.151 mm (2)
  • 39.301 mm (2)
  • 39.5 mm (2)
  • 40.651 mm (2)
  • 40.801 mm (2)
  • 41.0 mm (2)
  • 41.176 mm (2)
  • 41.901 mm (1)
  • 42.051 mm (2)
  • 42.25 mm (3)
  • 42.401 mm (2)
  • 42.6 mm (1)
  • 44.1 mm (1)
  • 44.276 mm (2)
  • 44.45 mm (1)
  • 44.625 mm (1)
  • 44.801 mm (1)
  • 44.975 mm (1)
  • 46.176 mm (1)
  • 46.35 mm (1)
  • 46.526 mm (1)
  • 46.7 mm (2)
  • 46.875 mm (1)
  • 49.301 mm (1)
  • 49.475 mm (2)
  • 49.651 mm (1)
  • 49.825 mm (1)
  • 50.0 mm (1)
  • 50.176 mm (1)
  • 51.375 mm (1)
  • 51.551 mm (1)
  • 51.725 mm (1)
  • 51.901 mm (2)
  • 52.075 mm (1)
  • 54.25 mm (1)
  • 54.426 mm (2)
  • 54.6 mm (1)
  • 54.776 mm (1)
  • 54.95 mm (2)
  • 55.125 mm (1)
  • 56.026 mm (1)
  • 56.2 mm (2)
  • 56.375 mm (1)
  • 56.551 mm (1)
  • 56.725 mm (2)
  • 56.901 mm (1)
  • 57.075 mm (1)
  • 59.45 mm (1)
  • 59.625 mm (2)
  • 59.801 mm (1)
  • 59.975 mm (1)
  • 60.151 mm (2)
  • 60.325 mm (1)
  • 61.225 mm (1)
  • 61.401 mm (2)
  • 61.575 mm (1)
  • 61.75 mm (1)
  • 61.926 mm (2)
  • 62.1 mm (1)
  • 62.276 mm (1)
  • 66.15 mm (1)
  • 66.325 mm (2)
  • 66.5 mm (1)
  • 70.351 mm (1)
  • 70.525 mm (2)
  • 70.7 mm (1)
  • 71.05 mm (1)
  • 71.575 mm (1)
  • 92.275 mm (1)
  • 92.45 mm (2)
  • 92.625 mm (1)
  • 92.801 mm (1)
  • 92.976 mm (2)
  • 96.476 mm (1)
  • 96.65 mm (1)
  • 96.825 mm (1)
  • 97.0 mm (1)
  • 97.176 mm (1)
Over All Length [L] Min to Over All Length [L] Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC7030 (145)
  • KC7135 (22)
  • KC7140 (183)
  • KC7225 (7)
  • KC7235 (10)
  • KC7315 (183)
  • KC7320 (4)
  • KC7410 (183)
  • KCMS15 (183)
  • KCPM45 (183)
  • KCU25 (183)
  • KCU40 (183)
  • YYMISF (10)
frontEnd
Insert Shape
Insert Shape
  • B-PARALLELOGRAM 82 (7)
  • D-DIAMOND/RHOMBIC 90 (97)
  • KSEM DRILL (183)
  • X-TRIGON 84 (79)
Point Angle
Point Angle
  • 140.0 (91)
Point Angle Min to Point Angle Max
backEnd
System Size
System Size
  • FDS28 (14)
  • FDS32 (16)
  • FDS36 (18)
  • FDS40 (14)
  • FDS45 (12)
  • FDS50 (16)
  • FDS56 (18)
  • FDS63 (22)
  • FDS71 (18)
  • FDS80 (19)
  • FDS90 (16)
No filters matching ""

KSEM PLUS™ • A1ヘッド • 31.75～70.99 mm／1.250～2.794の径範囲″

(58) KSEM PLUS™ • A1ヘッド • 31.75～70.99 mm／1.250～2.794の径範囲″

KSEM PLUS™ • B1ヘッド • 28.00～70.99 mm／1.102～2.794の径範囲″

(65) KSEM PLUS™ • B1ヘッド • 28.00～70.99 mm／1.102～2.794の径範囲″

KSEM PLUS™ • A1ヘッド • 28.00～31.74 mm／1.102～1.249の径範囲″

(7) KSEM PLUS™ • A1ヘッド • 28.00～31.74 mm／1.102～1.249の径範囲″

KSEM PLUS™ • B1ヘッド • 71.00～93.34 mm／2.795～3.674の径範囲″

(25) KSEM PLUS™ • B1ヘッド • 71.00～93.34 mm／2.795～3.674の径範囲″

KSEM PLUS™ • A1ヘッド • 71.00～93.34 mm／2.795～3.674の径範囲″

(16) KSEM PLUS™ • A1ヘッド • 71.00～93.34 mm／2.795～3.674の径範囲″

KSEM PLUS™ • B1ヘッド • 93.35～101.60 mm／3.675～4.000の径範囲″

(7) KSEM PLUS™ • B1ヘッド • 93.35～101.60 mm／3.675～4.000の径範囲″

KSEM PLUS™ • A1ヘッド • 93.35～101.60 mm／3.675～4.000の径範囲″

(5) KSEM PLUS™ • A1ヘッド • 93.35～101.60 mm／3.675～4.000の径範囲″
マイソリューションページにを追加しようとしています. 続行しますか?
product-image
Please adjust the following properties from

ISO製品型番

ANSI製品型番

to find similar products.

The following files are available

Please select a file to download

Models

Product data

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

ダッシュボード情報を表示するには、ログインする必要があります
Session expired due to inactivity, please login again
カートに追加しようとした製品（）はありません カスタマーサービスにお問い合わせください。
アイテムがカートに正常に追加されました
カートを表示

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO製品型番 材種    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

ご登録いただきありがとうございます。今からウェブサイトにアクセス頂き、ご利用が可能でございます。

You are about to leave the Solution building process.

Are you sure you want to leave?