Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Notifications

Mark all as read
Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (379)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (379)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (379)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (379)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (379)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (379)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (379)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (379)
  • M Stainless Steel (378)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (378)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (378)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (378)
  • K Cast Iron (350)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (350)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (350)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (350)
  • N Non-Ferrous Materials (203)
    • N1
      Wrought Aluminum
      (203)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (203)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (203)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (179)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (134)
    • N6
      Carbon, Graphite Composites, CFRP
      (134)
    • N7
      MMC's
      (134)
  • S High-Temp Alloys (377)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (377)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (377)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (377)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (377)
  • H Hardened Materials (132)
    • H1
      Hardened Materials 44-48 HRC
      (132)
    • H2
      Hardened Materials 48-55 HRC
      (132)
    • H3
      Hardened Materials 56-60 HRC
      (132)
    • H4
      Hardened Materials >60 HRC
      (132)
Applications
Applications
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (225)
  • Blind Hole Finishing Blind Hole Finishing (324)
  • Grooving Grooving (1)
  • ID Thread Turning ID Thread Turning (1)
  • Multiple Direction Cutting Multiple Direction Cutting (12)
  • Slot Milling Slot Milling (5)
  • Slot Side Slot Side (5)
  • Slot Square End Slot Square End (5)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (154)
  • Through Hole Finishing Through Hole Finishing (248)
Cutting Diameter
Cutting Diameter
  • 0.1969 in (4)
  • 0.2165 in (4)
  • 0.2362 in (6)
  • 0.25 in (2)
  • 0.2559 in (4)
  • 0.2756 in (4)
  • 0.3125 in (2)
  • 0.315 in (6)
  • 0.3543 in (4)
  • 0.375 in (2)
  • 0.3937 in (6)
  • 0.4331 in (4)
  • 0.4375 in (2)
  • 0.4724 in (6)
  • 0.5 in (2)
  • 0.5118 in (4)
  • 0.551 in (4)
  • 0.5512 in (10)
  • 0.5625 in (4)
  • 0.5906 in (4)
  • 0.591 in (4)
  • 0.625 in (3)
  • 0.6299 in (10)
  • 0.6693 in (8)
  • 0.6875 in (4)
  • 0.7087 in (6)
  • 0.709 in (4)
  • 0.743 in (4)
  • 0.748 in (9)
  • 0.75 in (6)
  • 0.7874 in (10)
  • 0.8268 in (5)
  • 0.827 in (1)
  • 0.866 in (1)
  • 0.8661 in (6)
  • 0.875 in (5)
  • 0.9055 in (6)
  • 0.9375 in (4)
  • 0.9449 in (6)
  • 0.9843 in (7)
  • 1.0 in (5)
  • 1.0236 in (6)
  • 1.063 in (6)
  • 1.1024 in (7)
  • 1.125 in (1)
  • 1.1417 in (2)
  • 1.1811 in (7)
  • 1.2205 in (2)
  • 1.25 in (5)
  • 1.2598 in (7)
  • 1.2992 in (2)
  • 1.3385 in (4)
  • 1.3386 in (2)
  • 1.378 in (2)
  • 1.4173 in (7)
  • 1.4375 in (1)
  • 1.4567 in (2)
  • 1.4961 in (6)
  • 1.5354 in (2)
  • 1.5625 in (1)
  • 1.574 in (1)
  • 1.5748 in (6)
  • 1.6142 in (2)
  • 1.625 in (1)
  • 1.6535 in (7)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 5.0 mm (4)
  • 5.5 mm (4)
  • 6.0 mm (6)
  • 6.35 mm (2)
  • 6.5 mm (4)
  • 7.0 mm (4)
  • 7.9375 mm (2)
  • 8.0 mm (6)
  • 9.0 mm (4)
  • 9.525 mm (2)
  • 10.0 mm (6)
  • 11.0 mm (4)
  • 11.1125 mm (2)
  • 12.0 mm (6)
  • 12.7 mm (2)
  • 13.0 mm (4)
  • 14.0 mm (14)
  • 14.288 mm (4)
  • 15.0 mm (8)
  • 15.875 mm (2)
  • 15.88 mm (1)
  • 16.0 mm (10)
  • 17.0 mm (8)
  • 17.463 mm (4)
  • 18.0 mm (10)
  • 18.87 mm (4)
  • 19.0 mm (9)
  • 19.05 mm (6)
  • 20.0 mm (10)
  • 20.998 mm (1)
  • 21.0 mm (5)
  • 21.998 mm (1)
  • 22.0 mm (6)
  • 22.225 mm (4)
  • 22.24 mm (1)
  • 23.0 mm (6)
  • 23.813 mm (4)
  • 24.0 mm (6)
  • 25.0 mm (7)
  • 25.4 mm (5)
  • 26.0 mm (6)
  • 27.0 mm (6)
  • 28.0 mm (7)
  • 28.575 mm (1)
  • 29.0 mm (2)
  • 30.0 mm (7)
  • 31.0 mm (2)
  • 31.75 mm (5)
  • 32.0 mm (7)
  • 33.0 mm (2)
  • 34.0 mm (6)
  • 35.0 mm (2)
  • 36.0 mm (7)
  • 36.52 mm (1)
  • 37.0 mm (2)
  • 38.0 mm (6)
  • 39.0 mm (2)
  • 39.6875 mm (1)
  • 39.991 mm (1)
  • 40.0 mm (6)
  • 41.0 mm (2)
  • 41.961 mm (1)
  • 42.0 mm (7)
Cutting Diameter Min to Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (90)
  • Lightly Interrupted Cut (97)
  • Smooth Cut (97)
  • Varying Depth of Cut (97)
Reach
Reach
  • 0.968 in (1)
  • 1.009 in (1)
  • 1.045 in (1)
  • 1.968 in (1)
  • 2.045 in (1)
Reach Min to Reach Max
Reach
Reach
  • 24.58 mm (1)
  • 25.63 mm (1)
  • 26.55 mm (1)
  • 49.99 mm (1)
  • 51.95 mm (1)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (66)
  • 91.0 (8)
  • 92.0 (23)
  • 93.0 (1)
  • 95.0 (4)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • E-BORE Boring Bar (21)
  • Short Taper Reamer Shank (192)
  • Straight-Cylindrical (92)
  • Whistle Notch 2 (3)
  • Whistle Notch 2 Front (12)
Number of Flutes
Number of Flutes
  • 2 (4)
  • 3 (1)
  • 4 (54)
  • 6 (148)
  • 8 (80)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (35)
  • 2.0 (31)
  • 3.0 (5)
  • 4.0 (92)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0015 in (38)
  • 0.002 in (2)
  • 0.0039 in (5)
  • 0.004 in (132)
  • 0.007 in (2)
  • 0.0079 in (35)
  • 0.008 in (132)
  • 0.015 in (2)
  • 0.0156 in (133)
  • 0.0158 in (36)
  • 0.016 in (95)
  • 0.0197 in (2)
  • 0.0311 in (3)
  • 0.0312 in (21)
  • 0.0313 in (132)
  • 0.0315 in (29)
  • 0.0469 in (10)
  • 0.047 in (7)
  • 0.0625 in (3)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.038 mm (38)
  • 0.05 mm (2)
  • 0.051 mm (2)
  • 0.1 mm (137)
  • 0.102 mm (10)
  • 0.178 mm (2)
  • 0.18 mm (2)
  • 0.2 mm (133)
  • 0.203 mm (124)
  • 0.38 mm (2)
  • 0.381 mm (2)
  • 0.397 mm (125)
  • 0.4 mm (135)
  • 0.5 mm (2)
  • 0.791 mm (3)
  • 0.794 mm (21)
  • 0.8 mm (132)
  • 1.2 mm (10)
  • 1.6 mm (3)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (141)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (141)
Corner Chamfer Min to Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Lightly Interrupted Cut (1)
  • Smooth Cut (1)
  • Varying Depth of Cut (1)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • HCK10 (39)
  • HT2 (45)
  • HTX (44)
  • HWK15 (39)
  • K10M (42)
  • K10P (42)
  • K20K (42)
  • K313 (134)
  • K68 (132)
  • KB1610 (127)
  • KB1630 (54)
  • KB5610 (125)
  • KB5625 (48)
  • KB5630 (47)
  • KB9610 (48)
  • KBH20 (55)
  • KC250 (87)
  • KC5010 (134)
  • KC5025 (134)
  • KC525M (86)
  • KC5410 (132)
  • KC6005 (76)
  • KC6305 (97)
  • KC710 (88)
  • KC720 (132)
  • KC725M (87)
  • KC730 (134)
  • KC7310 (86)
  • KC732 (132)
  • KC8050 (132)
  • KC810 (132)
  • KC850 (132)
  • KC9010 (125)
  • KC9025 (132)
  • KC910 (132)
  • KC9105 (132)
  • KC9110 (132)
  • KC9120 (125)
  • KC9125 (132)
  • KC9225 (132)
  • KC9240 (132)
  • KC9240NEW (132)
  • KC925M (86)
  • KC9315 (132)
  • KC9320 (132)
  • KC9325 (132)
  • KC935 (134)
  • KC950 (125)
  • KC990 (125)
  • KCD25 (132)
  • KCK05 (132)
  • KCK15 (132)
  • KCK15B (132)
  • KCK20 (132)
  • KCK20B (132)
  • KCM15 (132)
  • KCM15B (131)
  • KCM25 (132)
  • KCM25B (132)
  • KCM35 (45)
  • KCP05 (132)
  • KCP10 (132)
  • KCP10B (132)
  • KCP25 (132)
  • KCP25B (132)
  • KCP30 (131)
  • KCPK05 (86)
  • KCPK30 (86)
  • KCS10 (132)
  • KCS10B (132)
  • KCU05 (72)
  • KCU10 (139)
  • KCU25 (134)
  • KD050 (124)
  • KD081 (40)
  • KD100 (88)
  • KD105 (86)
  • KD120 (86)
  • KD1400 (127)
  • KD1405 (86)
  • KD1415 (49)
  • KD1425 (127)
  • KT125 (87)
  • KT150 (87)
  • KT175 (124)
  • KT315 (134)
  • KT325 (45)
  • KTP10 (125)
  • KU10 (125)
  • KU10T (132)
  • KU30T (132)
  • PD100 (39)
  • SP4019 (93)
  • THM (39)
  • THM-X (39)
  • TN10P (39)
  • TN10U (39)
  • TN15M (39)
  • TN2000 (39)
  • TN20K (39)
Hand Of Tool
Hand Of Tool
  • R (320)
Wiper Insert
Wiper Insert
  • N (104)
  • Y (26)
Helix Hand
Helix Hand
  • L (118)
  • N (163)
  • R (1)
Lead in Length
Lead in Length
  • 0.2 mm (45)
  • 0.3 mm (6)
  • 0.4 mm (10)
  • 0.5 mm (102)
  • 0.75 mm (6)
  • 0.95 mm (10)
  • 1.1 mm (95)
  • 1.15 mm (8)
Lead in Length Min to Lead in Length Max
Lead In Length
Lead In Length
  • 0.0079 in (45)
  • 0.01 in (6)
  • 0.0197 in (36)
  • 0.02 in (76)
  • 0.03 in (6)
  • 0.04 in (10)
  • 0.043 in (59)
  • 0.0433 in (36)
  • 0.05 in (8)
Lead In Length Min to Lead In Length Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 2.0 mm (1)
  • 4.0 mm (1)
  • 6.0 mm (4)
  • 8.0 mm (2)
  • 8.5 mm (2)
  • 10.0 mm (4)
  • 11.0 mm (2)
  • 12.0 mm (3)
  • 13.5 mm (2)
  • 14.0 mm (4)
  • 15.0 mm (1)
  • 16.0 mm (4)
  • 19.0 mm (1)
  • 19.5 mm (1)
  • 20.0 mm (1)
  • 22.0 mm (1)
  • 22.5 mm (1)
  • 24.5 mm (1)
  • 25.0 mm (3)
  • 25.5 mm (2)
  • 29.0 mm (2)
  • 29.5 mm (2)
  • 33.5 mm (1)
  • 34.0 mm (2)
  • 36.0 mm (2)
  • 40.0 mm (1)
  • 40.5 mm (1)
  • 42.0 mm (1)
  • 43.0 mm (2)
  • 45.5 mm (1)
  • 47.0 mm (1)
  • 49.0 mm (1)
  • 50.0 mm (1)
  • 52.0 mm (2)
  • 53.0 mm (1)
  • 56.5 mm (1)
  • 60.0 mm (2)
  • 61.0 mm (1)
  • 65.0 mm (3)
  • 68.0 mm (1)
  • 76.0 mm (1)
  • 82.0 mm (1)
  • 97.0 mm (1)
  • 100.0 mm (2)
  • 103.5 mm (1)
  • 110.0 mm (1)
  • 125.0 mm (1)
  • 138.0 mm (3)
  • 200.0 mm (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.08 in (1)
  • 0.1575 in (1)
  • 0.2362 in (3)
  • 0.2363 in (1)
  • 0.315 in (2)
  • 0.3346 in (1)
  • 0.335 in (1)
  • 0.3937 in (4)
  • 0.4331 in (2)
  • 0.4724 in (3)
  • 0.5315 in (2)
  • 0.5511 in (2)
  • 0.5512 in (2)
  • 0.5906 in (1)
  • 0.6299 in (4)
  • 0.748 in (1)
  • 0.7677 in (1)
  • 0.7874 in (1)
  • 0.8661 in (1)
  • 0.8858 in (1)
  • 0.9646 in (1)
  • 0.9843 in (3)
  • 1.0039 in (2)
  • 1.1417 in (2)
  • 1.1614 in (2)
  • 1.3189 in (1)
  • 1.3386 in (2)
  • 1.4173 in (2)
  • 1.5748 in (1)
  • 1.5945 in (1)
  • 1.6535 in (1)
  • 1.6929 in (2)
  • 1.791 in (1)
  • 1.8504 in (1)
  • 1.9291 in (1)
  • 1.9685 in (1)
  • 2.0472 in (2)
  • 2.0866 in (1)
  • 2.2244 in (1)
  • 2.3622 in (2)
  • 2.4016 in (1)
  • 2.5591 in (3)
  • 2.6772 in (1)
  • 2.9921 in (1)
  • 3.2283 in (1)
  • 3.82 in (1)
  • 3.937 in (2)
  • 4.0748 in (1)
  • 4.3307 in (1)
  • 4.9213 in (1)
  • 5.43 in (1)
  • 5.4331 in (2)
  • 7.874 in (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 0.2756 in (1)
  • 0.315 in (2)
  • 0.3543 in (1)
  • 0.374 in (1)
  • 0.3937 in (2)
  • 0.4528 in (1)
  • 0.472 in (2)
  • 0.4724 in (3)
  • 0.5511 in (2)
  • 0.5512 in (2)
  • 0.5709 in (1)
  • 0.6299 in (4)
  • 0.6496 in (1)
  • 0.6693 in (1)
  • 0.7677 in (1)
  • 0.7874 in (4)
  • 0.8858 in (1)
  • 0.9055 in (1)
  • 0.9843 in (1)
  • 1.0039 in (1)
  • 1.0236 in (1)
  • 1.1811 in (2)
  • 1.3189 in (1)
  • 1.4567 in (2)
  • 1.6142 in (1)
  • 1.7126 in (1)
  • 1.7323 in (1)
  • 2.0866 in (1)
  • 2.126 in (1)
  • 2.28 in (1)
  • 2.5591 in (1)
  • 2.5984 in (2)
  • 3.0315 in (1)
  • 3.2677 in (1)
  • 3.937 in (1)
  • 4.0157 in (1)
  • 4.0551 in (1)
  • 5.1181 in (1)
  • 5.9843 in (1)
  • 8.0709 in (1)
  • 8.071 in (1)
  • 40.1575 in (2)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 7.0 mm (1)
  • 8.0 mm (2)
  • 9.0 mm (1)
  • 9.5 mm (1)
  • 10.0 mm (2)
  • 11.5 mm (1)
  • 12.0 mm (5)
  • 14.0 mm (4)
  • 14.5 mm (1)
  • 16.0 mm (4)
  • 16.5 mm (1)
  • 17.0 mm (1)
  • 19.5 mm (1)
  • 20.0 mm (4)
  • 22.5 mm (1)
  • 23.0 mm (1)
  • 25.0 mm (1)
  • 25.5 mm (1)
  • 26.0 mm (1)
  • 30.0 mm (2)
  • 33.5 mm (1)
  • 37.0 mm (2)
  • 41.0 mm (1)
  • 43.5 mm (1)
  • 44.0 mm (1)
  • 53.0 mm (1)
  • 54.0 mm (1)
  • 58.0 mm (1)
  • 65.0 mm (1)
  • 66.0 mm (2)
  • 77.0 mm (1)
  • 83.0 mm (1)
  • 100.0 mm (1)
  • 102.0 mm (1)
  • 103.0 mm (1)
  • 130.0 mm (1)
  • 152.0 mm (1)
  • 205.0 mm (2)
  • 1020.0 mm (2)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (2)
  • E (31)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (21)
  • NEUTRAL (ZERO) (11)
Maximum Bore Depth
Maximum Bore Depth
  • 0.562 in (1)
  • 0.7871 in (1)
  • 0.803 in (1)
  • 0.853 in (1)
  • 0.9052 in (1)
  • 1.042 in (1)
  • 1.1021 in (1)
  • 1.1043 in (1)
  • 1.1808 in (1)
  • 1.201 in (1)
  • 1.279 in (1)
  • 1.2986 in (1)
  • 1.338 in (1)
  • 1.416 in (1)
  • 1.516 in (1)
  • 1.573 in (1)
  • 1.5742 in (1)
  • 1.6926 in (1)
  • 1.6948 in (1)
  • 1.9064 in (1)
  • 2.165 in (1)
  • 2.1654 in (1)
  • 2.2766 in (1)
  • 2.3622 in (2)
  • 2.7556 in (2)
  • 2.9524 in (2)
  • 3.543 in (2)
  • 3.9367 in (1)
  • 4.7241 in (1)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 14.27 mm (1)
  • 19.993 mm (1)
  • 20.4 mm (1)
  • 21.7 mm (1)
  • 22.992 mm (1)
  • 26.46 mm (1)
  • 27.993 mm (1)
  • 28.048 mm (1)
  • 29.993 mm (1)
  • 30.5 mm (1)
  • 32.5 mm (1)
  • 32.985 mm (1)
  • 33.985 mm (1)
  • 35.96 mm (1)
  • 38.5 mm (1)
  • 39.96 mm (1)
  • 39.985 mm (1)
  • 42.993 mm (1)
  • 43.048 mm (1)
  • 48.423 mm (1)
  • 54.992 mm (1)
  • 55.0 mm (1)
  • 57.827 mm (1)
  • 60.0 mm (2)
  • 69.992 mm (2)
  • 74.991 mm (1)
  • 74.992 mm (1)
  • 89.992 mm (2)
  • 99.992 mm (1)
  • 119.992 mm (1)
Maximum Bore Depth Min