Product Suggestions

Product Family suggestions

successfully added to cart
View Cart

Notifications

Mark all as read
Read More

インサートあたり12枚の真の切れ刃を持つフェイスミーリング

Dodeka™　Mini

  • 12　mm
  • 切込み量：4.40 mm、3.20 mm、1.60 mm
  • リード角：30°、45°、75°

Dodeka™

  • 16mm
  • 切込み深さ：4.5 mm、2.20 mm
  • リード角：45°、75°

Dodeka Max™

  • 22mm
  • 切込み量：8.00 mm
  • リード角：45°

第1選択プログラムの全製品。 

選択や注文、使用が容易で、並外れた性能。第1選択の 詳細をご覧ください。 

Dodeka™　Mini

12枚の真の切れ刃により、切れ刃あたりのコスト削減と高い生産性を実現。

滑らかな切削動作により、切削抵抗を低減。

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (251)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (235)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (235)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (235)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (235)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (237)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (249)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (249)
  • M Stainless Steel (249)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (249)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (249)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (249)
  • K Cast Iron (230)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (230)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (229)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (229)
  • N Non-Ferrous Materials (144)
    • N1
      Wrought Aluminum
      (144)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (143)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (143)
  • S High-Temp Alloys (243)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (225)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (225)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (225)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (243)
  • H Hardened Materials (169)
    • H1
      Hardened Materials 44-48 HRC
      (169)
Select First Choice
  • BR (32)
  • CN (122)
  • DE (134)
  • GB (84)
  • IN (42)
  • SG (58)
  • US (123)
Applications
Applications
  • Chamfer Milling Chamfer Milling (141)
  • Face Milling Face Milling (168)
  • ID Thread Turning ID Thread Turning (1)
Cutting Diameter
Cutting Diameter
  • 0.984 in (7)
  • 1.0 in (7)
  • 1.25 in (7)
  • 1.26 in (8)
  • 1.5 in (5)
  • 1.575 in (10)
  • 1.969 in (9)
  • 2.0 in (9)
  • 2.48 in (10)
  • 2.5 in (9)
  • 3.0 in (11)
  • 3.15 in (11)
  • 3.938 in (10)
  • 4.0 in (9)
  • 4.921 in (10)
  • 5.0 in (10)
  • 6.0 in (5)
  • 6.299 in (5)
  • 7.875 in (3)
  • 8.0 in (2)
  • 9.843 in (3)
  • 10.0 in (3)
  • 12.0 in (2)
  • 12.403 in (3)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 25.0 mm (7)
  • 25.401 mm (7)
  • 31.75 mm (7)
  • 32.0 mm (8)
  • 38.1 mm (5)
  • 40.0 mm (10)
  • 50.0 mm (9)
  • 50.801 mm (9)
  • 63.0 mm (10)
  • 63.5 mm (9)
  • 76.2 mm (11)
  • 80.0 mm (11)
  • 100.0 mm (10)
  • 101.601 mm (9)
  • 125.0 mm (10)
  • 127.0 mm (10)
  • 152.4 mm (5)
  • 160.0 mm (5)
  • 200.0 mm (3)
  • 203.201 mm (2)
  • 250.0 mm (3)
  • 254.0 mm (3)
  • 304.8 mm (2)
  • 315.0 mm (3)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 33.176 mm (5)
  • 33.575 mm (5)
  • 38.15 mm (2)
  • 38.551 mm (2)
  • 39.926 mm (6)
  • 40.176 mm (6)
  • 44.45 mm (2)
  • 44.901 mm (1)
  • 45.151 mm (2)
  • 46.276 mm (2)
  • 46.35 mm (2)
  • 48.176 mm (2)
  • 51.0 mm (5)
  • 51.25 mm (1)
  • 53.151 mm (1)
  • 56.35 mm (2)
  • 57.151 mm (2)
  • 58.151 mm (3)
  • 58.95 mm (3)
  • 61.0 mm (2)
  • 61.801 mm (2)
  • 63.151 mm (1)
  • 63.95 mm (1)
  • 67.9 mm (1)
  • 69.351 mm (2)
  • 69.75 mm (1)
  • 69.851 mm (1)
  • 71.15 mm (3)
  • 71.65 mm (3)
  • 74.0 mm (3)
  • 74.5 mm (3)
  • 76.15 mm (1)
  • 76.65 mm (1)
  • 80.875 mm (1)
  • 82.45 mm (1)
  • 82.551 mm (2)
  • 84.351 mm (3)
  • 86.325 mm (2)
  • 87.2 mm (3)
  • 88.15 mm (3)
  • 89.325 mm (1)
  • 91.0 mm (3)
  • 93.125 mm (1)
  • 93.525 mm (1)
  • 95.15 mm (1)
  • 97.325 mm (1)
  • 97.875 mm (1)
  • 106.325 mm (2)
  • 107.5 mm (1)
  • 107.926 mm (1)
  • 108.15 mm (3)
  • 109.75 mm (3)
  • 110.976 mm (3)
  • 112.575 mm (2)
  • 117.325 mm (1)
  • 117.851 mm (1)
  • 118.926 mm (1)
  • 120.525 mm (1)
  • 131.326 mm (2)
  • 133.15 mm (3)
  • 133.326 mm (2)
  • 135.15 mm (3)
  • 135.951 mm (2)
  • 135.975 mm (1)
  • 137.951 mm (3)
  • 142.326 mm (1)
  • 142.875 mm (1)
  • 144.326 mm (1)
  • 145.951 mm (1)
  • 163.375 mm (3)
  • 169.726 mm (1)
  • 170.976 mm (3)
  • 171.4 mm (1)
  • 177.326 mm (1)
  • 177.951 mm (1)
  • 211.0 mm (1)
  • 214.175 mm (1)
  • 217.326 mm (2)
  • 220.5 mm (1)
  • 261.0 mm (1)
  • 265.0 mm (1)
  • 267.3 mm (2)
  • 271.3 mm (2)
  • 315.8 mm (1)
  • 322.1 mm (1)
  • 326.0 mm (1)
  • 332.3 mm (2)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 1.306 in (5)
  • 1.322 in (5)
  • 1.502 in (2)
  • 1.518 in (2)
  • 1.572 in (6)
  • 1.582 in (6)
  • 1.75 in (2)
  • 1.768 in (1)
  • 1.778 in (2)
  • 1.822 in (2)
  • 1.825 in (2)
  • 1.897 in (2)
  • 2.008 in (5)
  • 2.019 in (1)
  • 2.093 in (1)
  • 2.219 in (2)
  • 2.25 in (2)
  • 2.289 in (3)
  • 2.321 in (3)
  • 2.402 in (2)
  • 2.433 in (2)
  • 2.486 in (1)
  • 2.519 in (1)
  • 2.673 in (1)
  • 2.73 in (2)
  • 2.746 in (1)
  • 2.75 in (1)
  • 2.801 in (3)
  • 2.821 in (3)
  • 2.914 in (3)
  • 2.934 in (3)
  • 2.998 in (1)
  • 3.019 in (1)
  • 3.184 in (1)
  • 3.246 in (1)
  • 3.25 in (2)
  • 3.321 in (3)
  • 3.399 in (2)
  • 3.434 in (3)
  • 3.47 in (3)
  • 3.517 in (1)
  • 3.583 in (3)
  • 3.666 in (1)
  • 3.682 in (1)
  • 3.746 in (1)
  • 3.833 in (1)
  • 3.853 in (1)
  • 4.186 in (2)
  • 4.232 in (1)
  • 4.249 in (1)
  • 4.258 in (3)
  • 4.321 in (3)
  • 4.369 in (3)
  • 4.432 in (2)
  • 4.619 in (1)
  • 4.64 in (1)
  • 4.682 in (1)
  • 4.745 in (1)
  • 5.17 in (2)
  • 5.242 in (3)
  • 5.249 in (2)
  • 5.321 in (3)
  • 5.352 in (2)
  • 5.353 in (1)
  • 5.431 in (3)
  • 5.603 in (1)
  • 5.625 in (1)
  • 5.682 in (1)
  • 5.746 in (1)
  • 6.432 in (3)
  • 6.682 in (1)
  • 6.731 in (3)
  • 6.748 in (1)
  • 6.981 in (1)
  • 7.006 in (1)
  • 8.307 in (1)
  • 8.432 in (1)
  • 8.557 in (2)
  • 8.682 in (1)
  • 10.276 in (1)
  • 10.433 in (1)
  • 10.525 in (2)
  • 10.682 in (2)
  • 12.433 in (1)
  • 12.682 in (1)
  • 12.835 in (1)
  • 13.083 in (2)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 1.625 mm (10)
  • 1.651 mm (5)
  • 2.2 mm (12)
  • 3.2 mm (12)
  • 3.225 mm (44)
  • 4.3 mm (22)
  • 4.476 mm (2)
  • 4.5 mm (43)
  • 8.0 mm (18)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.064 in (10)
  • 0.065 in (5)
  • 0.088 in (12)
  • 0.126 in (12)
  • 0.127 in (44)
  • 0.169 in (22)
  • 0.176 in (2)
  • 0.177 in (43)
  • 0.315 in (18)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 1.25 in (7)
  • 1.26 in (7)
  • 1.5 in (7)
  • 1.57 in (5)
  • 1.575 in (49)
  • 1.594 in (2)
  • 1.75 in (18)
  • 1.77 in (2)
  • 1.969 in (25)
  • 2.375 in (5)
  • 2.38 in (13)
  • 2.402 in (2)
  • 2.48 in (21)
  • 3.15 in (5)
Reach Min to Reach Max
Reach
Reach
  • 31.75 mm (7)
  • 32.0 mm (7)
  • 38.1 mm (7)
  • 39.875 mm (5)
  • 40.0 mm (49)
  • 40.5 mm (2)
  • 44.45 mm (18)
  • 44.95 mm (2)
  • 50.0 mm (25)
  • 60.325 mm (5)
  • 60.45 mm (13)
  • 60.975 mm (2)
  • 63.0 mm (21)
  • 80.0 mm (5)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 15.0 (27)
  • 45.0 (119)
  • 58.0 (22)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (100)
  • B-Cutter Retention Screw (11)
  • C-Bolt Circle (16)
  • KL Screw (3)
  • SHCS or RetScrw Or BoltCircle (5)
  • Screw-On Connection (7)
  • Straight-Cylindrical (17)
  • Weldon (9)
Number of Flutes
Number of Flutes
  • 10 (7)
  • 11 (2)
  • 12 (14)
  • 14 (5)
  • 16 (6)
  • 18 (2)
  • 2 (4)
  • 20 (2)
  • 24 (2)
  • 3 (19)
  • 4 (28)
  • 5 (26)
  • 6 (22)
  • 7 (2)
  • 8 (18)
  • 9 (9)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 6.0 (107)
  • 12.0 (275)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.039 in (125)
  • 0.047 in (118)
  • 0.063 in (111)
  • 0.079 in (25)
  • 0.126 in (100)
  • 0.138 in (20)
  • 0.171 in (69)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 1.0 mm (125)
  • 1.201 mm (118)
  • 1.6 mm (111)
  • 2.0 mm (25)
  • 3.2 mm (100)
  • 3.5 mm (20)
  • 4.351 mm (69)
Corner Radius Min to Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K313 (94)
  • KC410M (142)
  • KC510M (95)
  • KC520M (176)
  • KC522M (160)
  • KC725M (185)
  • KCK15 (184)
  • KCK20B (150)
  • KCKP10 (93)
  • KCMP30 (93)
  • KCPK30 (186)
  • KCPM20 (156)
  • KCPM40 (183)
  • KCSM30 (151)
  • KCSM40 (182)
  • KY3500 (58)
  • KYS30 (57)
Hand Of Tool
Hand Of Tool
  • R (168)
Wiper Insert
Wiper Insert
  • N (94)
  • Y (19)
frontEnd
Neck Diameter
Neck Diameter
  • 0.76 in (3)
  • 0.946 in (1)
  • 0.958 in (3)
  • 0.965 in (1)
  • 1.006 in (6)
  • 1.059 in (1)
  • 1.256 in (11)
Neck Diameter Min