HARVI™ III High-Performance Solid Carbide End Mills

フィルタを選択
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (334)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (143)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (143)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (143)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (143)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (334)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (334)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (143)
  • M Stainless Steel (334)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (334)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (334)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (334)
  • K Cast Iron (106)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (106)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (106)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (106)
  • N Non-Ferrous Materials (106)
    • N1
      Wrought Aluminum (106)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (106)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (106)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (106)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (106)
    • N6
      Carbon, Graphite Composites, CFRP (106)
    • N7
      MMC's (106)
  • S High-Temp Alloys (334)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (334)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (334)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (334)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (334)
  • H Hardened Materials (334)
    • H1
      Hardened Materials 44-48 HRC (334)
    • H2
      Hardened Materials 48-55 HRC (106)
    • H3
      Hardened Materials 56-60 HRC (106)
    • H4
      Hardened Materials >60 HRC (106)
第1選択を選択
  • DE (10)
  • GB (4)
  • IN (1)
  • US (49)
Applications
Applications
  • Face Milling Face Milling (126)
  • Pocket Pocket (294)
  • Pocket Helical Pocket Helical (284)
  • Pocket Milling Pocket Milling (294)
  • Pocket Plunge Milling Pocket Plunge Milling (18)
  • Profile Milling Profile Milling (79)
  • Ramping Ramping (284)
  • Shoulder Ball Nose Shoulder Ball Nose (79)
  • Shoulder Milling Shoulder Milling (337)
  • Shoulder Roughing Shoulder Roughing (171)
  • Shoulder Square End Shoulder Square End (186)
  • Slot Ball Nose Slot Ball Nose (21)
  • Slot Milling Slot Milling (21)
  • Trochoidal Milling Trochoidal Milling (151)
Cutting Diameter
Cutting Diameter
  • 0.125 in (4)
  • 0.157 in (4)
  • 0.188 in (4)
  • 0.197 in (4)
  • 0.237 in (4)
  • 0.25 in (4)
  • 0.313 in (4)
  • 0.315 in (3)
  • 0.375 in (20)
  • 0.394 in (20)
  • 0.438 in (4)
  • 0.473 in (24)
  • 0.5 in (38)
  • 0.551 in (4)
  • 0.625 in (28)
  • 0.63 in (32)
  • 0.75 in (44)
  • 0.787 in (32)
  • 0.984 in (12)
  • 1.0 in (42)
  • 1.25 in (6)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 3.176 mm (4)
  • 4.0 mm (4)
  • 4.775 mm (4)
  • 5.0 mm (4)
  • 6.0 mm (4)
  • 6.351 mm (4)
  • 7.95 mm (4)
  • 8.0 mm (3)
  • 9.525 mm (20)
  • 10.0 mm (20)
  • 11.125 mm (4)
  • 12.0 mm (24)
  • 12.701 mm (38)
  • 14.0 mm (4)
  • 15.875 mm (28)
  • 16.0 mm (32)
  • 19.05 mm (44)
  • 20.0 mm (32)
  • 25.0 mm (12)
  • 25.401 mm (42)
  • 31.75 mm (6)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 7.45 mm (1)
  • 7.625 mm (1)
  • 8.625 mm (1)
  • 9.025 mm (1)
  • 9.25 mm (1)
  • 9.625 mm (1)
  • 11.101 mm (1)
  • 11.451 mm (1)
  • 11.625 mm (1)
  • 12.101 mm (1)
  • 13.451 mm (1)
  • 14.625 mm (1)
  • 14.8 mm (1)
  • 14.826 mm (1)
  • 14.951 mm (1)
  • 15.101 mm (1)
  • 15.175 mm (1)
  • 15.25 mm (1)
  • 15.275 mm (1)
  • 15.351 mm (1)
  • 15.451 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.293 in (1)
  • 0.3 in (1)
  • 0.34 in (1)
  • 0.355 in (1)
  • 0.364 in (1)
  • 0.379 in (1)
  • 0.437 in (1)
  • 0.451 in (1)
  • 0.458 in (1)
  • 0.477 in (1)
  • 0.53 in (1)
  • 0.577 in (1)
  • 0.583 in (1)
  • 0.584 in (1)
  • 0.589 in (1)
  • 0.595 in (1)
  • 0.597 in (1)
  • 0.6 in (1)
  • 0.601 in (1)
  • 0.604 in (1)
  • 0.608 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 2.0 mm (1)
  • 10.0 mm (4)
  • 12.0 mm (4)
  • 12.701 mm (2)
  • 15.875 mm (2)
  • 16.0 mm (4)
  • 19.05 mm (6)
  • 20.0 mm (4)
  • 22.0 mm (12)
  • 22.225 mm (6)
  • 25.0 mm (4)
  • 25.401 mm (24)
  • 26.0 mm (26)
  • 29.0 mm (2)
  • 30.175 mm (6)
  • 31.75 mm (44)
  • 32.0 mm (28)
  • 33.0 mm (3)
  • 38.0 mm (28)
  • 38.1 mm (32)
  • 39.0 mm (6)
  • 39.7 mm (4)
  • 41.276 mm (26)
  • 42.0 mm (2)
  • 44.45 mm (16)
  • 45.0 mm (12)
  • 50.801 mm (21)
  • 57.151 mm (8)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.079 in (1)
  • 0.394 in (4)
  • 0.473 in (4)
  • 0.5 in (2)
  • 0.625 in (2)
  • 0.63 in (4)
  • 0.75 in (6)
  • 0.787 in (4)
  • 0.866 in (12)
  • 0.875 in (6)
  • 0.984 in (4)
  • 1.0 in (24)
  • 1.024 in (26)
  • 1.143 in (2)
  • 1.188 in (6)
  • 1.25 in (44)
  • 1.26 in (28)
  • 1.299 in (3)
  • 1.496 in (28)
  • 1.5 in (32)
  • 1.536 in (6)
  • 1.563 in (4)
  • 1.625 in (26)
  • 1.655 in (2)
  • 1.75 in (16)
  • 1.772 in (12)
  • 2.0 in (21)
  • 2.25 in (8)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 0.75 in (1)
  • 0.984 in (2)
  • 1.0 in (2)
  • 1.024 in (1)
  • 1.119 in (1)
  • 1.143 in (1)
  • 1.181 in (9)
  • 1.188 in (3)
  • 1.193 in (3)
  • 1.209 in (2)
  • 1.244 in (4)
  • 1.25 in (4)
  • 1.299 in (1)
  • 1.325 in (3)
  • 1.407 in (5)
  • 1.417 in (14)
  • 1.431 in (4)
  • 1.457 in (5)
  • 1.487 in (1)
  • 1.5 in (1)
  • 1.536 in (3)
  • 1.563 in (2)
  • 1.575 in (11)
  • 1.655 in (1)
  • 1.657 in (6)
  • 1.875 in (2)
  • 1.889 in (4)
  • 1.891 in (21)
  • 1.909 in (5)
  • 1.987 in (10)
  • 2.0 in (3)
  • 2.031 in (4)
  • 2.112 in (9)
  • 2.15 in (4)
  • 2.25 in (14)
  • 2.277 in (4)
  • 2.325 in (2)
  • 2.362 in (22)
  • 2.386 in (5)
  • 2.4 in (7)
  • 2.434 in (2)
  • 2.65 in (8)
  • 2.9 in (1)
  • 2.953 in (7)
  • 3.063 in (3)
  • 3.25 in (4)
Reach Min to Reach Max
Reach
Reach
  • 19.05 mm (1)
  • 25.0 mm (2)
  • 25.401 mm (2)
  • 26.0 mm (1)
  • 28.425 mm (1)
  • 29.0 mm (1)
  • 30.0 mm (9)
  • 30.175 mm (3)
  • 30.3 mm (3)
  • 30.701 mm (2)
  • 31.6 mm (4)
  • 31.75 mm (4)
  • 33.0 mm (1)
  • 33.65 mm (3)
  • 35.7 mm (4)
  • 35.725 mm (1)
  • 36.0 mm (14)
  • 36.35 mm (4)
  • 37.0 mm (5)
  • 37.775 mm (1)
  • 38.1 mm (1)
  • 39.0 mm (3)
  • 39.7 mm (2)
  • 40.0 mm (11)
  • 42.0 mm (1)
  • 42.075 mm (6)
  • 47.625 mm (2)
  • 47.975 mm (4)
  • 48.0 mm (21)
  • 48.475 mm (5)
  • 50.475 mm (10)
  • 50.801 mm (3)
  • 51.6 mm (4)
  • 53.651 mm (9)
  • 54.6 mm (4)
  • 57.151 mm (14)
  • 57.801 mm (4)
  • 59.051 mm (2)
  • 60.0 mm (22)
  • 60.6 mm (5)
  • 60.95 mm (7)
  • 61.825 mm (2)
  • 67.3 mm (8)
  • 73.65 mm (1)
  • 75.0 mm (7)
  • 77.801 mm (3)
  • 82.551 mm (4)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 84.0 (21)
  • 86.0 (22)
  • 90.0 (294)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • SAFE-LOCK (76)
  • Straight-Cylindrical (261)
Over All Length [L]
Over All Length [L]
  • 2.5 in (2)
  • 2.835 in (6)
  • 2.992 in (10)
  • 3.0 in (42)
  • 3.269 in (26)
  • 3.5 in (26)
  • 3.504 in (4)
  • 3.622 in (6)
  • 3.938 in (30)
  • 4.0 in (60)
  • 4.094 in (6)
  • 4.331 in (7)
  • 4.5 in (28)
  • 4.529 in (24)
  • 4.764 in (7)
  • 4.783 in (1)
  • 4.921 in (2)
  • 5.0 in (24)
  • 5.315 in (6)
  • 5.5 in (4)
  • 5.906 in (4)
  • 6.0 in (12)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 63.5 mm (2)
  • 72.0 mm (6)
  • 76.0 mm (10)
  • 76.2 mm (42)
  • 83.0 mm (26)
  • 88.9 mm (26)
  • 89.0 mm (4)
  • 92.0 mm (6)
  • 100.0 mm (30)
  • 101.601 mm (60)
  • 104.0 mm (6)
  • 110.0 mm (7)
  • 114.301 mm (28)
  • 115.0 mm (24)
  • 121.0 mm (7)
  • 121.5 mm (1)
  • 125.0 mm (2)
  • 127.0 mm (24)
  • 135.0 mm (6)
  • 139.701 mm (4)
  • 150.0 mm (4)
  • 152.4 mm (12)
Over All Length [L] Min to Over All Length [L] Max
cornerConfiguration
Corner Style
Corner Style
  • BALL NOSE (79)
  • RADIUS (212)
  • SQUARE END (46)
Corner Radius
Corner Radius
  • 0.0 in (46)
  • 0.015 in (10)
  • 0.02 in (18)
  • 0.03 in (68)
  • 0.039 in (16)
  • 0.06 in (28)
  • 0.063 in (4)
  • 0.079 in (16)
  • 0.09 in (8)
  • 0.094 in (4)
  • 0.098 in (4)
  • 0.119 in (10)
  • 0.12 in (24)
  • 0.125 in (4)
  • 0.156 in (4)
  • 0.157 in (13)
  • 0.188 in (8)
  • 0.19 in (4)
  • 0.197 in (8)
  • 0.219 in (4)
  • 0.237 in (8)
  • 0.25 in (10)
  • 0.313 in (4)
  • 0.315 in (4)
  • 0.375 in (4)
  • 0.394 in (4)
  • 0.5 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (46)
  • 0.375 mm (10)
  • 0.5 mm (18)
  • 0.75 mm (68)
  • 1.0 mm (16)
  • 1.526 mm (28)
  • 1.6 mm (4)
  • 2.0 mm (16)
  • 2.275 mm (8)
  • 2.375 mm (4)
  • 2.5 mm (4)
  • 3.0 mm (10)
  • 3.051 mm (24)
  • 3.176 mm (4)
  • 3.975 mm (4)
  • 4.0 mm (13)
  • 4.775 mm (8)
  • 4.825 mm (4)
  • 5.0 mm (8)
  • 5.551 mm (4)
  • 6.0 mm (8)
  • 6.351 mm (10)
  • 7.95 mm (4)
  • 8.0 mm (4)
  • 9.525 mm (4)
  • 10.0 mm (4)
  • 12.701 mm (2)
Corner Radius Min to Corner Radius Max
application