Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

スレッドミーリング

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • Countersinking Countersinking (38)
  • Drilling Drilling (16)
  • ID Thread Turning ID Thread Turning (221)
  • OD Thread Turning OD Thread Turning (64)
  • Pipe Thread Pipe Thread (45)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (33)
  • Shoulder Roughing Shoulder Roughing (33)
  • Shoulder Square End Shoulder Square End (33)
  • Thread Milling Thread Milling (203)
  • Threading Threading (203)
Workpiece Material
  • P Steel (452)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (452)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (452)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (452)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (452)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (429)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (452)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (407)
  • M Stainless Steel (452)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (452)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (452)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (407)
  • K Cast Iron (468)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (468)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (452)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (452)
  • N Non-Ferrous Materials (61)
    • N1
      Wrought Aluminum
      (45)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (61)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (61)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (61)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (61)
    • N6
      Carbon, Graphite Composites, CFRP
      (45)
  • S High-Temp Alloys (305)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (305)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (305)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (305)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (305)
  • H Hardened Materials (289)
    • H1
      Hardened Materials 44-48 HRC
      (289)
Maximum Cutting Diameter
  • 0.547 (1)
  • 0.55 (1)
  • 0.6693 (1)
  • 0.67 (1)
  • 0.8661 (1)
  • 0.87 (1)
  • 1.1 (1)
  • 1.1024 (1)
  • 1.4213 (1)
  • 1.538 (1)
  • 1.772 (1)
  • 1.93 (1)
to
Maximum Cutting Diameter
  • 13.9 (1)
  • 14.0 (1)
  • 17.0 (1)
  • 17.02 (1)
  • 22.0 (1)
  • 22.1 (1)
  • 27.94 (1)
  • 28.0 (1)
  • 36.1 (1)
  • 39.065 (1)
  • 45.0 (1)
  • 49.0 (1)
to
Cutting Diameter
  • 2.4 (1)
  • 3.15 (1)
  • 3.16 (1)
  • 3.35 (1)
  • 4.0 (1)
  • 4.04 (1)
  • 4.3 (1)
  • 4.7 (1)
  • 4.8 (3)
  • 5.0 (2)
  • 5.05 (1)
  • 5.9 (1)
  • 6.0 (2)
  • 6.15 (1)
  • 6.5 (2)
  • 6.7 (1)
  • 6.75 (1)
  • 7.65 (1)
  • 8.0 (2)
  • 8.2 (2)
  • 8.4 (2)
  • 8.7 (2)
  • 8.992 (2)
  • 9.0 (3)
  • 9.9 (3)
  • 10.0 (5)
  • 10.1 (1)
  • 10.135 (1)
  • 10.15 (1)
  • 10.35 (1)
  • 10.4 (2)
  • 10.6 (1)
  • 11.4 (1)
  • 11.43 (2)
  • 11.5 (3)
  • 11.6 (3)
  • 11.8 (1)
  • 12.0 (3)
  • 12.1 (2)
  • 13.1 (1)
  • 13.5 (1)
  • 13.6 (3)
  • 14.0 (5)
  • 14.1 (1)
  • 14.7 (1)
  • 14.732 (1)
  • 14.75 (1)
  • 15.0 (2)
  • 15.1 (1)
  • 15.45 (2)
  • 15.494 (2)
  • 15.5 (2)
  • 16.0 (4)
  • 17.0 (5)
  • 17.018 (2)
  • 17.2 (1)
  • 17.3 (1)
  • 19.0 (1)
  • 19.05 (2)
  • 20.0 (4)
  • 20.066 (1)
  • 20.3 (1)
  • 20.37 (1)
  • 20.5 (2)
  • 20.6 (4)
  • 21.2 (2)
  • 22.0 (5)
  • 22.098 (1)
  • 22.1 (4)
  • 23.0 (1)
  • 23.1 (2)
  • 23.3 (1)
  • 24.5 (1)
  • 24.6 (1)
  • 25.0 (1)
  • 25.9 (2)
  • 26.0 (3)
  • 26.01 (1)
  • 26.39 (1)
  • 26.4 (1)
  • 29.972 (3)
  • 30.0 (15)
  • 31.0 (4)
  • 34.5 (1)
  • 35.0 (1)
  • 36.0 (4)
  • 36.1 (2)
  • 36.5 (1)
  • 36.6 (2)
  • 37.0 (3)
  • 37.084 (1)
  • 37.541 (1)
  • 39.1 (1)
  • 41.91 (1)
  • 42.0 (3)
  • 42.012 (1)
  • 42.926 (1)
  • 44.0 (2)
  • 46.0 (1)
  • 48.0 (2)
  • 49.0 (2)
  • 52.0 (2)
  • 53.086 (1)
  • 53.1 (1)
  • 56.0 (1)
  • 58.0 (1)
  • 58.9 (2)
  • 63.0 (1)
to
Cutting Diameter
  • 0.0945 (1)
  • 0.124 (1)
  • 0.1244 (1)
  • 0.1319 (1)
  • 0.1575 (1)
  • 0.1591 (1)
  • 0.1693 (1)
  • 0.185 (1)
  • 0.189 (3)
  • 0.1969 (2)
  • 0.1988 (1)
  • 0.2323 (1)
  • 0.2362 (2)
  • 0.2421 (1)
  • 0.2559 (2)
  • 0.2638 (1)
  • 0.2657 (1)
  • 0.3012 (1)
  • 0.315 (2)
  • 0.3228 (2)
  • 0.3307 (2)
  • 0.3425 (2)
  • 0.354 (2)
  • 0.3543 (3)
  • 0.3898 (3)
  • 0.39 (1)
  • 0.3937 (4)
  • 0.3976 (1)
  • 0.3996 (1)
  • 0.4075 (1)
  • 0.4094 (2)
  • 0.4173 (1)
  • 0.45 (3)
  • 0.4528 (2)
  • 0.453 (1)
  • 0.4567 (3)
  • 0.4646 (1)
  • 0.4724 (2)
  • 0.4764 (2)
  • 0.5157 (1)
  • 0.53 (1)
  • 0.535 (1)
  • 0.5354 (2)
  • 0.5512 (5)
  • 0.5551 (1)
  • 0.58 (2)
  • 0.581 (1)
  • 0.59 (1)
  • 0.5906 (1)
  • 0.594 (1)
  • 0.608 (1)
  • 0.6083 (1)
  • 0.61 (2)
  • 0.6102 (2)
  • 0.63 (4)
  • 0.6692 (1)
  • 0.6693 (2)
  • 0.67 (4)
  • 0.677 (1)
  • 0.68 (1)
  • 0.748 (1)
  • 0.75 (2)
  • 0.7874 (3)
  • 0.79 (1)
  • 0.7992 (1)
  • 0.802 (1)
  • 0.8071 (2)
  • 0.81 (4)
  • 0.835 (2)
  • 0.866 (2)
  • 0.8661 (3)
  • 0.87 (5)
  • 0.906 (1)
  • 0.91 (2)
  • 0.965 (1)
  • 0.97 (1)
  • 0.9843 (1)
  • 1.02 (2)
  • 1.0236 (1)
  • 1.024 (2)
  • 1.039 (1)
  • 1.0394 (1)
  • 1.1181 (1)
  • 1.18 (8)
  • 1.181 (4)
  • 1.1811 (5)
  • 1.22 (4)
  • 1.3583 (1)
  • 1.378 (1)
  • 1.417 (3)
  • 1.4173 (1)
  • 1.42 (2)
  • 1.437 (1)
  • 1.44 (2)
  • 1.4567 (3)
  • 1.46 (3)
  • 1.478 (1)
  • 1.54 (1)
  • 1.65 (1)
  • 1.6535 (2)
  • 1.654 (2)
  • 1.66 (2)
  • 1.69 (1)
  • 1.732 (2)
  • 1.811 (1)
  • 1.8898 (1)
  • 1.89 (1)
  • 1.93 (2)
  • 2.047 (2)
  • 2.09 (2)
  • 2.2047 (1)
  • 2.283 (1)
  • 2.32 (2)
  • 2.48 (1)
to
Cutting Length
  • 0.2457 (1)
  • 0.3244 (1)
  • 0.3437 (1)
  • 0.4031 (1)
  • 0.4094 (2)
  • 0.41 (2)
  • 0.4244 (1)
  • 0.43 (4)
  • 0.433 (3)
  • 0.4866 (2)
  • 0.6299 (1)
  • 0.63 (14)
  • 0.6472 (1)
  • 0.6626 (2)
  • 0.7969 (1)
  • 0.8055 (1)
  • 0.9634 (1)
  • 0.9728 (1)
  • 0.9976 (1)
  • 1.06 (7)
  • 1.063 (7)
  • 1.1024 (1)
  • 1.148 (1)
  • 1.2661 (1)
  • 1.2965 (1)
  • 1.4445 (1)
  • 1.5157 (2)
  • 1.5224 (1)
  • 1.6201 (1)
  • 1.6205 (1)
to
Cutting Length
  • 6.24 (1)
  • 8.24 (1)
  • 8.73 (1)
  • 10.24 (1)
  • 10.4 (2)
  • 10.41 (2)
  • 10.78 (1)
  • 10.92 (3)
  • 10.922 (1)
  • 11.0 (5)
  • 12.36 (2)
  • 16.0 (11)
  • 16.002 (4)
  • 16.44 (1)
  • 16.83 (2)
  • 20.24 (1)
  • 20.46 (1)
  • 22.0 (1)
  • 24.47 (1)
  • 24.71 (1)
  • 25.34 (1)
  • 26.92 (4)
  • 26.924 (1)
  • 27.0 (9)
  • 28.0 (1)
  • 29.16 (1)
  • 32.16 (1)
  • 32.93 (1)
  • 36.69 (1)
  • 38.5 (2)
  • 38.67 (1)
  • 41.15 (1)
  • 41.16 (1)
to
Type of Thread
  • BSPT (19)
  • BSW (142)
  • M (207)
  • MF (29)
  • NC/UNC (7)
  • NPS (17)
  • NPT (51)
  • NPTF (37)
  • UN (165)
Reach
  • 8.51 (1)
  • 9.59 (1)
  • 10.53 (1)
  • 11.82 (1)
  • 11.94 (1)
  • 11.99 (1)
  • 12.0 (2)
  • 12.97 (1)
  • 13.19 (1)
  • 14.37 (1)
  • 14.69 (1)
  • 15.49 (1)
  • 15.5 (3)
  • 16.44 (1)
  • 16.83 (1)
  • 16.99 (1)
  • 17.0 (1)
  • 17.23 (1)
  • 17.71 (1)
  • 18.42 (1)
  • 19.1 (1)
  • 20.0 (1)
  • 20.07 (1)
  • 20.24 (1)
  • 20.46 (1)
  • 20.5 (1)
  • 21.22 (1)
  • 21.23 (1)
  • 21.5 (1)
  • 22.0 (2)
  • 22.1 (3)
  • 23.0 (1)
  • 23.11 (2)
  • 23.52 (1)
  • 23.65 (1)
  • 23.87 (1)
  • 24.47 (1)
  • 24.71 (1)
  • 25.0 (1)
  • 25.24 (1)
  • 25.27 (1)
  • 25.34 (1)
  • 25.4 (1)
  • 25.76 (1)
  • 25.9 (2)
  • 26.0 (4)
  • 26.48 (1)
  • 27.63 (1)
  • 27.9 (1)
  • 28.0 (4)
  • 28.57 (1)
  • 29.16 (1)
  • 30.0 (2)
  • 30.24 (1)
  • 30.25 (1)
  • 31.98 (1)
  • 32.16 (1)
  • 32.93 (1)
  • 33.3 (1)
  • 33.62 (1)
  • 34.04 (1)
  • 34.24 (1)
  • 36.0 (2)
  • 36.1 (1)
  • 36.69 (1)
  • 36.8 (1)
  • 36.87 (1)
  • 37.0 (1)
  • 38.0 (1)
  • 38.1 (1)
  • 38.67 (1)
  • 40.0 (2)
  • 41.15 (1)
  • 41.16 (1)
  • 42.67 (1)
  • 42.9 (2)
  • 42.93 (1)
  • 43.0 (10)
  • 43.2 (3)
  • 44.0 (1)
  • 44.5 (1)
  • 44.96 (1)
  • 45.0 (3)
  • 45.2 (1)
  • 45.4 (1)
  • 51.56 (2)
  • 52.0 (3)
  • 54.6 (1)
  • 55.0 (4)
  • 55.9 (2)
  • 58.0 (2)
  • 65.0 (7)
  • 65.0494 (1)
  • 65.2 (1)
  • 65.4 (2)
  • 68.4 (1)
  • 75.2 (1)
  • 75.4 (1)
  • 80.0 (4)
  • 81.5 (1)
  • 85.3 (2)
  • 85.4 (2)
  • 89.66 (1)
  • 91.4 (1)
  • 92.0 (1)
  • 98.0 (1)
  • 100.0 (1)
  • 100.3 (1)
  • 100.4 (1)
  • 101.6 (1)
  • 103.0 (1)
  • 103.1 (1)
  • 110.4 (1)
  • 110.7 (1)
  • 120.1 (1)
  • 120.4 (1)
  • 128.0 (2)
  • 137.87 (1)
  • 152.0 (1)
to
Reach
  • 0.335 (1)
  • 0.3776 (1)
  • 0.4146 (1)
  • 0.4654 (1)
  • 0.47 (1)
  • 0.472 (2)
  • 0.4724 (1)
  • 0.5106 (1)
  • 0.5193 (1)
  • 0.5657 (1)
  • 0.5783 (1)
  • 0.61 (1)
  • 0.6102 (1)
  • 0.6472 (1)
  • 0.6626 (1)
  • 0.669 (1)
  • 0.6693 (1)
  • 0.6783 (1)
  • 0.6972 (1)
  • 0.7252 (1)
  • 0.752 (1)
  • 0.787 (1)
  • 0.79 (1)
  • 0.7969 (1)
  • 0.8055 (1)
  • 0.807 (1)
  • 0.8354 (1)
  • 0.8358 (1)
  • 0.8465 (1)
  • 0.866 (1)
  • 0.8661 (1)
  • 0.87 (3)
  • 0.9055 (1)
  • 0.91 (2)
  • 0.926 (1)
  • 0.9311 (1)
  • 0.9398 (1)
  • 0.9634 (1)
  • 0.9728 (1)
  • 0.9843 (1)
  • 0.9937 (1)
  • 0.9949 (1)
  • 0.9976 (1)
  • 1.0 (1)
  • 1.0142 (1)
  • 1.02 (2)
  • 1.0236 (2)
  • 1.024 (2)
  • 1.0425 (1)
  • 1.0878 (1)
  • 1.1 (3)
  • 1.102 (1)
  • 1.1024 (1)
  • 1.1248 (1)
  • 1.148 (1)
  • 1.18 (1)
  • 1.181 (1)
  • 1.1906 (1)
  • 1.1909 (1)
  • 1.2591 (1)
  • 1.2661 (1)
  • 1.2965 (1)
  • 1.311 (1)
  • 1.3236 (1)
  • 1.34 (1)
  • 1.348 (1)
  • 1.417 (1)
  • 1.4173 (1)
  • 1.42 (1)
  • 1.4445 (1)
  • 1.45 (1)
  • 1.4516 (1)
  • 1.4567 (1)
  • 1.4961 (1)
  • 1.5 (1)
  • 1.5224 (1)
  • 1.575 (1)
  • 1.6201 (1)
  • 1.6205 (1)
  • 1.68 (1)
  • 1.69 (4)
  • 1.6929 (4)
  • 1.693 (5)
  • 1.7 (3)
  • 1.7323 (1)
  • 1.75 (1)
  • 1.77 (2)
  • 1.7717 (1)
  • 1.772 (1)
  • 1.78 (1)
  • 1.788 (1)
  • 2.03 (2)
  • 2.047 (1)
  • 2.0472 (2)
  • 2.15 (1)
  • 2.165 (1)
  • 2.1654 (3)
  • 2.2 (2)
  • 2.283 (1)
  • 2.2835 (1)
  • 2.4 (2)
  • 2.559 (3)
  • 2.56 (4)
  • 2.561 (1)
  • 2.57 (1)
  • 2.573 (1)
  • 2.575 (1)
  • 2.694 (1)
  • 2.96 (1)
  • 2.969 (1)
  • 3.1496 (1)
  • 3.15 (3)
  • 3.21 (1)
  • 3.36 (2)
  • 3.363 (2)
  • 3.53 (1)
  • 3.603 (1)
  • 3.622 (1)
  • 3.858 (1)
  • 3.937 (1)
  • 3.95 (1)
  • 3.953 (1)
  • 4.0 (1)
  • 4.055 (1)
  • 4.06 (1)
  • 4.343 (1)
  • 4.36 (1)
  • 4.73 (1)
  • 4.743 (1)
  • 5.039 (1)
  • 5.04 (1)
  • 5.43 (1)
  • 5.985 (1)
to
Tool Cutting Edge Angle
  • 88.217 (10)
  • 90.0 (161)
to
Connection Style
  • A-Socket Head Cap Screw (23)
  • Straight-Cylindrical (75)
  • Weldon (105)
Cutting Edges Per Insert
  • 1.0 (111)
  • 2.0 (274)
  • 3.0 (61)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.0 (61)
  • 0.05 (22)
  • 0.06 (35)
  • 0.08 (35)
  • 0.11 (28)
  • 0.14 (35)
  • 0.24 (35)
  • 0.25 (13)
  • 0.27 (13)
to
Corner Radius
  • 0.0 (61)
  • 0.002 (22)
  • 0.0024 (35)
  • 0.0031 (35)
  • 0.0043 (28)
  • 0.0055 (35)
  • 0.0094 (35)
  • 0.0098 (13)
  • 0.0106 (13)
to
Corner Chamfer
  • 0.0 (61)
to
Corner Chamfer
  • 0.0 (61)
to
application
Grade Of Cutting Tool
  • KC610M (260)
  • KC620M (61)
  • KC635M (289)