Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Tool Holders & Adapters

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Select First Choice
  • CN (40)
  • DE (165)
  • GB (89)
  • IN (47)
  • US (351)
Applications
  • Back Boring Back Boring (2)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (16)
  • Blind Hole Finishing Blind Hole Finishing (16)
  • Chamfer Turning Chamfer Turning (70)
  • Convex Drilling Convex Drilling (9)
  • Countersinking Countersinking (3)
  • Cut-Off Cut-Off (66)
  • Deep Grooving Deep Grooving (100)
  • Drilling Drilling (9)
  • Face Grooving Face Grooving (52)
  • Facing Facing (1220)
  • Grooving Grooving (275)
  • ID Facing ID Facing (313)
  • ID Grooving ID Grooving (152)
  • ID Thread Turning ID Thread Turning (209)
  • Inclined Entry Drilling Inclined Entry Drilling (9)
  • Inclined Exit Drilling Inclined Exit Drilling (9)
  • Multiple Direction Cutting Multiple Direction Cutting (1456)
  • OD Thread Turning OD Thread Turning (209)
  • Plunge Turning Plunge Turning (153)
  • Profiling Profiling (970)
  • TRN Boring TRN Boring (1129)
  • Threading Threading (220)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (16)
  • Through Hole Finishing Through Hole Finishing (16)
  • Turning Turning (1502)
  • X-Offset Drilling X-Offset Drilling (9)
Workpiece Material
  • P Steel (2123)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2119)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2119)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (2119)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (2119)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (2119)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (2123)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (2123)
  • M Stainless Steel (2114)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (2114)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (2114)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (2114)
  • K Cast Iron (2146)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (2146)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (2146)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (2143)
  • N Non-Ferrous Materials (2046)
    • N1
      Wrought Aluminum
      (2020)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (2016)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1323)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (2020)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (2000)
    • N6
      Carbon, Graphite Composites, CFRP
      (1870)
    • N7
      MMC's
      (1862)
  • S High-Temp Alloys (2135)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (2133)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (2135)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (2133)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (2105)
  • H Hardened Materials (1812)
    • H1
      Hardened Materials 44-48 HRC
      (1812)
    • H2
      Hardened Materials 48-55 HRC
      (1680)
    • H3
      Hardened Materials 56-60 HRC
      (1533)
    • H4
      Hardened Materials >60 HRC
      (1454)
  • C CFRP Materials (5)
    • C1
      CFRP, CFRP / CFRP
      (5)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous
      (5)
Cutting Diameter
  • 4.828 (1)
  • 6.35 (1)
  • 9.525 (1)
  • 15.875 (1)
  • 17.462 (1)
  • 19.05 (1)
  • 20.638 (1)
  • 22.225 (1)
  • 23.812 (1)
  • 25.4 (1)
  • 26.988 (1)
  • 27.0 (1)
  • 28.575 (1)
  • 29.0 (1)
  • 30.162 (1)
  • 31.0 (1)
  • 31.75 (1)
  • 33.35 (1)
  • 34.925 (1)
  • 38.1 (1)
  • 39.7 (1)
  • 41.275 (1)
  • 44.45 (1)
  • 47.625 (1)
  • 49.212 (1)
  • 50.8 (1)
to
Cutting Diameter
  • 0.1901 (1)
  • 0.25 (1)
  • 0.375 (1)
  • 0.625 (1)
  • 0.6875 (1)
  • 0.75 (1)
  • 0.8125 (1)
  • 0.875 (1)
  • 0.9375 (1)
  • 1.0 (1)
  • 1.0625 (1)
  • 1.063 (1)
  • 1.125 (1)
  • 1.1417 (1)
  • 1.1875 (1)
  • 1.2205 (1)
  • 1.25 (1)
  • 1.313 (1)
  • 1.375 (1)
  • 1.5 (1)
  • 1.563 (1)
  • 1.625 (1)
  • 1.75 (1)
  • 1.875 (1)
  • 1.9375 (1)
  • 2.0 (1)
to
Type of Thread
  • 55 (132)
  • 60 (337)
  • ACME (275)
  • API (189)
  • API BUTTRESS (41)
  • API RD (183)
  • BSPT (91)
  • BSW (224)
  • BUTTRESS (205)
  • M (255)
  • NPT (183)
  • NPTF (91)
  • RD DIN 405 (126)
  • STUB ACME (218)
  • TR DIN 103 (126)
  • UN (296)
  • UNJ (183)
Cutting Condition
  • Heavily Interrupted Cut (1858)
  • Interrupted (993)
  • Lightly Interrupted Cut (1878)
  • Smooth Cut (1880)
  • Varying Depth of Cut (1872)
Maximum Hole Depth [L4]
  • 1.875 (1)
  • 2.0625 (1)
  • 2.25 (1)
  • 2.4375 (1)
  • 2.625 (1)
  • 2.8125 (1)
  • 3.0 (1)
  • 3.1875 (1)
  • 3.189 (1)
  • 3.375 (1)
  • 3.4252 (1)
  • 3.5625 (1)
  • 3.6614 (1)
  • 3.75 (1)
  • 3.939 (1)
  • 4.125 (1)
  • 4.5 (1)
  • 4.689 (1)
  • 4.875 (1)
  • 5.25 (1)
  • 5.625 (1)
  • 5.8125 (1)
  • 6.0 (1)
to
Maximum Hole Depth [L4]
  • 47.625 (1)
  • 52.388 (1)
  • 57.15 (1)
  • 61.912 (1)
  • 66.675 (1)
  • 71.438 (1)
  • 76.2 (1)
  • 80.962 (1)
  • 81.0 (1)
  • 85.725 (1)
  • 87.0 (1)
  • 90.488 (1)
  • 93.0 (1)
  • 95.25 (1)
  • 100.051 (1)
  • 104.775 (1)
  • 114.3 (1)
  • 119.101 (1)
  • 123.825 (1)
  • 133.35 (1)
  • 142.875 (1)
  • 147.638 (1)
  • 152.4 (1)
to
Cutting Condition Material
  • H-All (1556)
  • K-All (1876)
  • K1 (367)
  • M-All (1803)
  • N-All (1690)
  • P-All (1850)
  • S-All (1797)
  • S2 (986)
  • S4 (524)
Reach
  • 64.0 (1)
  • 72.0 (1)
  • 76.0 (1)
  • 81.0 (1)
  • 86.0 (1)
  • 90.0 (1)
  • 95.0 (1)
  • 96.0 (1)
  • 100.0 (1)
  • 103.0 (1)
  • 107.0 (1)
  • 110.0 (1)
  • 115.0 (1)
  • 117.0 (1)
  • 123.0 (1)
  • 129.0 (1)
  • 139.0 (1)
  • 145.0 (1)
  • 158.0 (1)
  • 167.0 (1)
  • 182.0 (1)
  • 187.0 (1)
  • 191.0 (1)
to
Reach
  • 2.5197 (1)
  • 2.8346 (1)
  • 2.9921 (1)
  • 3.189 (1)
  • 3.3858 (1)
  • 3.5433 (1)
  • 3.7402 (1)
  • 3.7795 (1)
  • 3.937 (1)
  • 4.0551 (1)
  • 4.2126 (1)
  • 4.3307 (1)
  • 4.5276 (1)
  • 4.6063 (1)
  • 4.8425 (1)
  • 5.0787 (1)
  • 5.4724 (1)
  • 5.7087 (1)
  • 6.2205 (1)
  • 6.5748 (1)
  • 7.1654 (1)
  • 7.3622 (1)
  • 7.5197 (1)
to
Tool Cutting Edge Angle
  • 0.0 (2)
  • 45.0 (92)
  • 48.0 (20)
  • 49.683 (2)
  • 49.783 (3)
  • 50.0 (6)
  • 61.0 (2)
  • 62.5 (29)
  • 63.0 (8)
  • 67.5 (4)
  • 72.5 (7)
  • 75.0 (205)
  • 85.0 (4)
  • 90.0 (656)
  • 92.0 (8)
  • 93.0 (505)
  • 95.0 (529)
  • 97.0 (4)
  • 107.5 (128)
to
Connection Style
  • Cutoff Support Blade A1-A3 (3)
  • KM (1270)
  • PSC (259)
  • Straight-Cylindrical (3)
Number of Flutes
  • 1 (3)
  • 2 (23)
Cutting Edges Per Insert
  • 1.0 (1324)
  • 2.0 (1402)
  • 3.0 (400)
  • 4.0 (1097)
  • 6.0 (187)
  • 8.0 (620)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.03 (93)
  • 0.033 (4)
  • 0.038 (215)
  • 0.05 (24)
  • 0.051 (149)
  • 0.056 (26)
  • 0.057 (46)
  • 0.066 (92)
  • 0.07 (52)
  • 0.071 (17)
  • 0.076 (264)
  • 0.08 (197)
  • 0.081 (26)
  • 0.082 (17)
  • 0.085 (17)
  • 0.086 (17)
  • 0.089 (62)
  • 0.09 (62)
  • 0.091 (17)
  • 0.094 (92)
  • 0.097 (72)
  • 0.1 (1022)
  • 0.102 (694)
  • 0.108 (26)
  • 0.116 (46)
  • 0.117 (46)
  • 0.127 (92)
  • 0.13 (6)
  • 0.131 (92)
  • 0.132 (92)
  • 0.133 (92)
  • 0.135 (17)
  • 0.15 (96)
  • 0.152 (52)
  • 0.155 (92)
  • 0.157 (92)
  • 0.159 (17)
  • 0.16 (77)
  • 0.165 (143)
  • 0.173 (92)
  • 0.177 (8)
  • 0.178 (140)
  • 0.18 (35)
  • 0.185 (31)
  • 0.19 (205)
  • 0.191 (205)
  • 0.198 (92)
  • 0.2 (1153)
  • 0.202 (123)
  • 0.203 (660)
  • 0.21 (52)
  • 0.223 (17)
  • 0.224 (92)
  • 0.225 (4)
  • 0.235 (92)
  • 0.24 (17)
  • 0.244 (46)
  • 0.25 (123)
  • 0.251 (92)
  • 0.254 (174)
  • 0.269 (109)
  • 0.279 (33)
  • 0.282 (92)
  • 0.284 (92)
  • 0.3 (125)
  • 0.305 (27)
  • 0.31 (16)
  • 0.315 (118)
  • 0.318 (172)
  • 0.33 (92)
  • 0.34 (255)
  • 0.343 (51)
  • 0.356 (92)
  • 0.38 (35)
  • 0.381 (40)
  • 0.394 (29)
  • 0.396 (5)
  • 0.397 (1209)
  • 0.4 (1426)
  • 0.404 (92)
  • 0.406 (444)
  • 0.43 (92)
  • 0.432 (41)
  • 0.445 (143)
  • 0.472 (46)
  • 0.49 (92)
  • 0.5 (68)
  • 0.508 (92)
  • 0.51 (4)
  • 0.52 (1)
  • 0.533 (14)
  • 0.565 (26)
  • 0.57 (46)
  • 0.572 (155)
  • 0.575 (97)
  • 0.6 (83)
  • 0.64 (4)
  • 0.65 (1)
  • 0.7 (26)
  • 0.75 (62)
  • 0.76 (17)
  • 0.787 (162)
  • 0.79 (97)
  • 0.791 (26)
  • 0.792 (363)
  • 0.794 (1258)
  • 0.795 (2)
  • 0.8 (1555)
  • 0.826 (18)
  • 0.84 (9)
  • 0.902 (143)
  • 0.93 (14)
  • 0.936 (26)
  • 0.97 (4)
  • 0.99 (1)
  • 1.0 (170)
  • 1.01 (8)
  • 1.06 (10)
  • 1.188 (114)
  • 1.19 (212)
  • 1.191 (1151)
  • 1.194 (154)
  • 1.195 (46)
  • 1.2 (1433)
  • 1.25 (154)
  • 1.404 (14)
  • 1.5 (165)
  • 1.515 (8)
  • 1.525 (11)
  • 1.585 (92)
  • 1.587 (200)
  • 1.588 (971)
  • 1.59 (37)
  • 1.6 (1129)
  • 1.75 (154)
  • 1.98 (46)
  • 1.981 (92)
  • 2.0 (152)
  • 2.025 (9)
  • 2.25 (143)
  • 2.38 (79)
  • 2.381 (182)
  • 2.388 (143)
  • 2.39 (25)
  • 2.4 (410)
  • 2.5 (55)
  • 2.525 (4)
  • 3.0 (1)
  • 3.175 (51)
  • 3.18 (70)
  • 3.2 (192)
  • 4.0 (51)
  • 4.7625 (2)
  • 5.0 (8)
  • 6.0 (10)
  • 6.35 (18)
  • 7.94 (5)
  • 8.0 (9)
  • 9.525 (2)
  • 10.0 (8)
  • 12.5 (6)
  • 12.7 (2)
  • 16.0 (5)
to
Corner Radius
  • 0.001 (45)
  • 0.0011 (22)
  • 0.0012 (26)
  • 0.0013 (4)
  • 0.0015 (215)
  • 0.002 (161)
  • 0.0023 (46)
  • 0.0026 (92)
  • 0.0028 (69)
  • 0.003 (264)
  • 0.0031 (171)
  • 0.0032 (43)
  • 0.0033 (17)
  • 0.0034 (17)
  • 0.0035 (62)
  • 0.0037 (92)
  • 0.0038 (72)
  • 0.0039 (17)
  • 0.004 (1194)
  • 0.0043 (26)
  • 0.0046 (92)
  • 0.005 (98)
  • 0.0052 (92)
  • 0.0053 (109)
  • 0.0059 (95)
  • 0.006 (146)
  • 0.0062 (92)
  • 0.0063 (43)
  • 0.0065 (143)
  • 0.0068 (92)
  • 0.007 (144)
  • 0.0075 (205)
  • 0.0078 (137)
  • 0.0079 (91)
  • 0.008 (1217)
  • 0.0083 (252)
  • 0.0088 (109)
  • 0.0089 (4)
  • 0.0093 (92)
  • 0.0094 (17)
  • 0.0096 (46)
  • 0.0099 (92)
  • 0.01 (174)
  • 0.0106 (109)
  • 0.011 (33)
  • 0.0111 (92)
  • 0.0112 (92)
  • 0.0118 (92)
  • 0.012 (60)
  • 0.0122 (16)
  • 0.0124 (92)
  • 0.0125 (172)
  • 0.013 (255)
  • 0.0135 (143)
  • 0.014 (92)
  • 0.015 (65)
  • 0.0155 (29)
  • 0.0156 (1386)
  • 0.0157 (9)
  • 0.0158 (62)
  • 0.0159 (92)
  • 0.016 (1106)
  • 0.017 (133)
  • 0.0175 (143)
  • 0.0186 (46)
  • 0.0193 (92)
  • 0.0197 (68)
  • 0.02 (97)
  • 0.021 (14)
  • 0.022 (26)
  • 0.0225 (155)
  • 0.025 (4)
  • 0.026 (1)
  • 0.0276 (26)
  • 0.0295 (62)
  • 0.0298 (17)
  • 0.031 (1163)
  • 0.0311 (26)
  • 0.0312 (1275)
  • 0.0313 (1542)
  • 0.0315 (361)
  • 0.032 (13)
  • 0.0325 (18)
  • 0.033 (9)
  • 0.0355 (143)
  • 0.0368 (14)
  • 0.0369 (26)
  • 0.038 (4)
  • 0.039 (11)
  • 0.0394 (160)
  • 0.0398 (8)
  • 0.042 (10)
  • 0.0468 (114)
  • 0.0469 (1433)
  • 0.047 (1163)
  • 0.0472 (233)
  • 0.0492 (154)
  • 0.0516 (83)
  • 0.0553 (14)
  • 0.059 (11)
  • 0.0591 (165)
  • 0.0597 (8)
  • 0.06 (11)
  • 0.062 (11)
  • 0.0625 (1335)
  • 0.063 (839)
  • 0.0689 (154)
  • 0.078 (92)
  • 0.0785 (9)
  • 0.0787 (143)
  • 0.079 (9)
  • 0.0797 (9)
  • 0.0886 (143)
  • 0.0928 (16)
  • 0.0938 (561)
  • 0.094 (314)
  • 0.098 (4)
  • 0.0984 (55)
  • 0.0985 (4)
  • 0.0994 (4)
  • 0.106 (46)
  • 0.1181 (1)
  • 0.125 (124)
  • 0.126 (119)
  • 0.1563 (208)
  • 0.1575 (51)
  • 0.1875 (2)
  • 0.1969 (8)
  • 0.197 (8)
  • 0.2362 (10)
  • 0.25 (18)
  • 0.312 (166)
  • 0.3125 (5)
  • 0.315 (9)
  • 0.375 (2)
  • 0.3935 (8)
  • 0.3937 (8)
  • 0.492 (2)
  • 0.4922 (6)
  • 0.5 (2)
  • 0.6299 (5)
  • 0.63 (5)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
  • Interrupted (23)
  • Stable (23)
  • Unstable (23)
Drilling Condition Material
  • K1 (23)
  • K2 (23)
  • K3 (23)
  • M1 (23)
  • M2 (23)
  • M3 (23)
  • N1 (23)
  • N2 (23)
  • N3 (23)
  • N4 (23)
  • N5 (23)
  • N6 (23)
  • N7 (23)
  • P0 (23)
  • P1 (23)
  • P2 (23)
  • P3 (23)
  • P4 (23)
  • P5 (23)
  • P6 (23)
  • S1 (23)
  • S2 (23)
  • S3 (23)
  • S4 (23)
Grade Of Cutting Tool
  • 13E (876)
  • 241 (200)
  • AC5 (19)
  • ALO (21)
  • C2 (11)
  • C25 (18)
  • C3 (11)
  • CBN6 (11)
  • CG4 (8)
  • CG5 (71)
  • CG6 (36)
  • CL4 (599)
  • CM1 (71)
  • CM2 (863)
  • CM3 (660)
  • CM4 (402)
  • CM5 (23)
  • CPD1 (11)
  • CPX (871)
  • CS5 (23)
  • CW2 (398)
  • CW2015 (782)
  • CW3020 (16)
  • CW5025 (863)
  • GH1 (45)
  • GX (445)
  • HCK10 (106)
  • HCK20 (26)
  • HCM15 (4)
  • HK1500 (733)
  • HK35 (92)
  • HT2 (646)
  • HTX (449)
  • HWK10 (11)
  • HWK15 (108)
  • K00379 (20)
  • K060 (494)
  • K090 (982)
  • K1 (356)
  • K1010P (45)
  • K1025 (9)
  • K10M (1206)
  • K10P (1094)
  • K10U (1028)
  • K15 (72)
  • K15U (1016)
  • K20K (1198)
  • K21 (474)
  • K25M (1075)
  • K25P (1047)
  • K2885 (154)
  • K313 (1779)
  • K35P (690)
  • K420 (1095)
  • K45 (581)
  • K4H (123)
  • K6 (12)
  • K68 (1637)
  • KB1340 (371)
  • KB1345 (653)
  • KB1610 (820)
  • KB1625 (670)
  • KB1630 (719)
  • KB5610 (705)
  • KB5625 (862)
  • KB5630 (563)
  • KB9610 (1012)
  • KB9640 (468)
  • KBH10 (943)
  • KBH10B (603)
  • KBH20 (981)
  • KBH20B (603)
  • KBK35 (208)
  • KBK45 (12)
  • KC210 (748)
  • KC250 (897)
  • KC5010 (1957)
  • KC5020P (112)
  • KC5025 (1980)
  • KC5035 (2)
  • KC5410 (1583)
  • KC5510 (1103)
  • KC5525 (723)
  • KC710 (523)